This fixes the name of the onda MSA501HS device, I guess it is called
different things in different countries.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds the Telit UC864-E HDSPA modem support to the option driver.
This lets their customers comply with the GPL instead of having to use a
binary driver from the manufacturer.

Cc: Simon Kissel <kissel@viprinet.com>
Cc: Nico Erfurth <ne@nicoerfurth.de>
Cc: Andrea Ghezzo <TS-EMEA@telit.com>
Cc: Dietmar Staps <Dietmar.Staps@telit.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch reverts 57833ea6
("usb-serial: pl2303: add support for RATOC REX-USB60F") and adds
support for the device to ftdi_sio driver.

Cc: Akira Tsukamoto <akirat@rd.scei.sony.co.jp>
Cc: stable <stable@kernel.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: prevent userspace from accessing shut down devices
  ieee1394: sbp2: use correct size of command descriptor block

vidiocgmbuf() does this:
        mutex_lock(&fh->cap.vb_lock);
        retval = videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
                                     V4L2_MEMORY_MMAP);

and videobuf_mmap_setup() then just does
        mutex_lock(&q->vb_lock);
        ret = __videobuf_mmap_setup(q, bcount, bsize, memory);
        mutex_unlock(&q->vb_lock);

which is an obvious double-take deadlock.

This patch fixes this by having vidiocgmbuf() just call the
__videobuf_mmap_setup function instead.
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Reported-by: Koos Vriezen <koos.vriezen@gmail.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If userspace ignores the POLLERR bit from poll(), and only attempts to
read() the device when POLLIN is set, it can still make ioctl() calls on
a device that has been removed from the system.  The node_id and
generation returned by GET_INFO will be outdated, but INITIATE_BUS_RESET
would still cause a bus reset, and GET_CYCLE_TIMER will return data.
And if you guess the correct generation to use, you can send requests to
a different device on the bus, and get responses back.

This patch prevents open, ioctl, compat_ioctl, and mmap against shutdown
devices.
Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Boaz Harrosh wrote:
> cmd->cmd_len is now guarantied to be set properly at all cases.
> And some commands you want to support will not be set correctly
> by COMMAND_SIZE().
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  [ALSA] hda - Fix ASUS P5GD1 model
  [ALSA] hda - Fix ALC262 fujitsu model
  snd-pcsp: use HRTIMER_CB_SOFTIRQ

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: remove CVS keywords
  HID: Add iMON LCDs to blacklist
  HID: add Microchip PICKit 1 and PICkit 2 to blacklist
  HID: split Numlock emulation quirk from HID_QUIRK_APPLE_HAS_FN.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Update defconfigs for desktop/server systems
  [POWERPC] Fix mpc8377_mds.dts DMA nodes to match spec
  [POWERPC] Update arch/powerpc/boot/.gitignore
  [POWERPC] Remove generated files on make clean
  [POWERPC] powerpc/mm/hash_low_32.S: Remove CVS keyword
  [POWERPC] Update Cell MAINTAINERS entry, add spufs entry
  lmb: Fix compile warning

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  [GFS2] Prefer strlcpy() over snprintf()
  [GFS2] Fix cast from unsigned int to s64
  [GFS2] filesystem consistency error from do_strip

The x86_64 pgd_bad(), pud_bad(), pmd_bad() inlines have differed from
their x86_32 counterparts in a couple of ways: they've been unnecessarily
weak (e.g. letting 0 or 1 count as good), and were typed as unsigned long.
Strengthen them and return int.

The PAE pmd_bad was too weak before, allowing any junk in the upper half;
but got strengthened by the patch correcting its ~PAGE_MASK to ~PTE_MASK.
The PAE pud_bad already said ~PTE_MASK; and since it folds into pgd_bad,
and we don't set the protection bits at that level, it'll do as is.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use PTE_MASK to extract mfn from pte.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use ~PTE_MASK to extract the non-pfn parts of the pte (ie, the pte
flags), rather than constructing an ad-hoc mask.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

_PAGE_CHG_MASK is defined as the set of bits not updated by
pte_modify(); specifically, the pfn itself, and the Accessed and Dirty
bits (which are updated by hardware).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use PTE_MASK in 3-level pagetables (ie, 32-bit PAE).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Put the definitions of __(VIRTUAL|PHYSICAL)_MASK before their uses.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the warning:

include2/asm/pgtable.h: In function `pte_modify':
include2/asm/pgtable.h:290: warning: left shift count >= width of type

On 32-bit PAE the virtual and physical addresses are both 32-bits,
so it ends up evaluating 1<<32.  Do the shift as a 64-bit shift then
cast to the appropriate size.  This should all be done at compile time,
and so have no effect on generated code.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Define PTE_MASK so that it contains a meaningful value for all x86
pagetable configurations.  Previously it was defined as a "long" which
means that it was too short to cover a 32-bit PAE pte entry.

It is now defined as a pteval_t, which is an integer type long enough
to contain a full pte (or pmd, pud, pgd).

This fixes an Xorg crash on 32-bit x86 with PAE due to corruption of the
NX bit in mprotect due to the incorrect type/value of PTE_MASK reported
by Hugh Dickins:

  "Yes, thanks Jeremy: I've checked that each stage builds and runs X on
   my boxes here, x86_32 and x86_32+PAE and x86_64.  (So even 1/8 is
   enough to fix the PAT pte_modify issue, though 2/8 then fixes
   compiler warnings.)"
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The new iMON LCDs from SoundGraph need to be blacklisted from HID in order to
be used by lirc.
Signed-off-by: Dylan R Semler <dylan.semler@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Microchip PICkit 1 and PICKit 2 USB Programmers are USB HID class of device but
they are not real HID device. They are now supported by libusb based programs
like the following programs.

pk2 and pk2cmd Linux port:
	http://home.pacbell.net/theposts/picmicro/
usb_pickit:
	http://tfc.duke.free.fr/pickit.html
usb_pickit original version:
	http://charm.cs.uiuc.edu/users/olawlor/projects/2003/microchip/

Therefore it ispreferred to blacklist them.
Signed-off-by: Xiaofan Chen <xiaofanc@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since 2.6.25 the HID_QUIRK_APPLE_HAS_FN quirk is enabled even for
non-laptop Apple keyboards of the Aluminium series. The USB version of
these don't need Numlock emulation, like the laptop (and Aluminium
Wireless) do, as they have a proper keypad.

This patch splits the Numlock emulation for Apple keyboards in a
different quirk flag, so that it can be enabled for all the keyboards
but the Aluminium USB ones.

If the Numlock emulation is enabled for Aluminium USB keyboards, the
JKL and UIO keys become the numeric pad, and the rest of the keyboard
is disabled, included the key used to disable Numlock.

Additionally, these keyboard should not have a Numlock at all, as the
Numlock key is instead replaced by the 'Clear' key as usual for Apple
USB keyboards.
Signed-off-by: Diego 'Flameeyes' Petteno <flameeyes@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Paul Mackerras <paulus@samba.org>

Corrected the model assignment for the ASUS P5GD1 w/SPDIF after reports of
surround sound not being possible.
Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixed the speaker auto-mute with two laptop and docking headphones.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Tony Vroon <tony@linx.net>

Change HRTIMER_CB_IRQSAFE to HRTIMER_CB_SOFTIRQ,
as suggested by Thomas Gleixner.
That solves the lock dependancy reported in
Bug #10701.
That also allows to call hrtimer_start()
directly, tasklet "stupid hack" removed.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

* Add dtbImage.*
* Added zImage.holly
* Folded zImage.coff.lds into zImage.*lds
* Removed some unused zImage.<foo> ignores
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

dtbImage.* and several zImage. targets get created but never cleaned up.

Also, moved zImage to the clean-files line associated with all other image
results (was previously duplicated).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  at91_mci: minor cleanup
  mmc: mmc host test driver
  mmc: Fix omap compile by replacing dev_name with dma_dev_name

Add a MAINTAINERS entry for the myri10ge driver.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'audit.b51' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] list_for_each_rcu must die: audit
  [patch 1/1] audit_send_reply(): fix error-path memory leak
  [PATCH] open sessionid permissions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] return to old errno choice in mkdir() et.al.
  [Patch] fs/binfmt_elf.c: fix wrong return values
  [PATCH] get rid of leak in compat_execve()
  [Patch] fs/binfmt_elf.c: fix a wrong free
  [PATCH] avoid multiplication overflows and signedness issues for max_fds
  [PATCH] dup_fd() part 4 - race fix
  [PATCH] dup_fd() - part 3
  [PATCH] dup_fd() part 2
  [PATCH] dup_fd() fixes, part 1
  [PATCH] take init_files to fs/file.c

* 'for-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx:
  [POWERPC] 4xx: Workaround for CHIP_11 Errata

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This removes a CVS keyword that wasn't updated for a long time from a
comment.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin SPORTS UART Driver: converting BFIN->BLACKFIN
  Blackfin serial driver: add extra IRQ flag for 8250 serial driver
  8250 Serial Driver: Added support for 8250-class UARTs in HV Sistemas H8606 board
  Blackfin arch: Fix bug - USB fails to build for BF524/BF526
  Blackfin arch: update boards defconfig files
  Blackfin arch: IO Port functions to read/write unalligned memory
  Blackfin arch: enable a choice to provide 4M DMA memory
  Blackfin arch: cleanup the icplb/dcplb multiple hit checks
  Blackfin arch: Add workaround to read edge triggered GPIOs
  Blackfin arch: Sync channel defines with struct dma_register dma_io_base_addr.
  Blackfin arch: Check for Anomaly 05000182
  [Blackfin] arch: rename bf5xx-flash to bfin-async-flash
  [Blackfin] arch: Blackfin checksum annotations