- 22 Jul, 2014 12 commits
-
-
David S. Miller authored
Hariprasad Shenai says: ==================== Misc. fix for cxgb4 and iw_cxgb4 This patch series adds support to enchance error reporting, log detailed warning for negative advice, support query_qp verb and advertise correct device max attributes for iwarp. The patches series is created against 'net-next' tree. And includes patches on cxgb4 and iw_cxgb4 driver. Since this patch-series contains changes which are dependent on commit id 4c2c5763 ("cxgb4/iw_cxgb4: use firmware ord/ird resource limits") of net-next tree we would like to request this patch series to get merged via David Miller's 'net-next' tree. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Use the size advertised by FW Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Advertise the actual max limits for things like qp depths, number of qps, cqs, etc. Clean up the queue allocation for qps and cqs. Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
David S. Miller authored
Govindarajulu Varadarajan says: ==================== enic: Display classifier filters using ethtool This series adds ethtool support to show classifier filters added by driver. v2: The patch 1/2 removes the $ifdef's around the filter structure. Making it available always. So that .get_rxnfc() can be implimented without any #ifdefs ==================== Signed-off-by: -
Govindarajulu Varadarajan authored
This patch impliments ethtool_ops->get_rxnfc() to display the classifier filter added by the driver. Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
This patch removes the #ifdef CONFIG_RFS_ACCEL around the classifier filter structures. This makes the filter structures available when CONFIG_RFS_ACCEL = n. Introduce enic_rfs_timer_start() & enic_rfs_timer_stop() to start/stop the timer. These two functions are nop when CONFIG_RFS_ACCEL = n. Signed-off-by:
-
Ursula Braun authored
An af_iucv stress test showed -EPIPE results for sendmsg() calls. They are caused by quiescing a path even though it has been already severed by peer. For IUCV transport shutdown() consists of 2 steps: (1) sending the shutdown message to peer (2) quiescing the iucv path If the iucv path between these 2 steps is severed due to peer closing the path, the quiesce step is no longer needed. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by:
Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Raspl authored
Add support to display the adjacent switch port's forwarding attributes. Currently supports info on forwarding modes '802.1' and 'rr' (reflective relay). Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by:
-
Florian Fainelli authored
The link adjustment callback can be called as frequently as desired by the PHY library, as such, let's avoid doing a Read/Modify/Write sequence if nothing changed, since these register accesses can be expensive. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 21 Jul, 2014 28 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet: PM and Wake-on-LAN This patchset brings S2/S3 Power Management support to the GENET driver as well as Wake-on-LAN using Magic Packets with or without SecureOn passwords. ==================== Signed-off-by: -
Florian Fainelli authored
Now that Wake-on-LAN support mode is fully integrated into the driver, allow an user to query and configure Wake-on-LAN in the driver. Signed-off-by:
-
Florian Fainelli authored
Update bcmgenet_suspend() to prepare the hardware for being put into Wake-on-LAN mode if the device can wakeup the system, and Wake-on-LAN is enabled. Whether we resume from Wake-on-LAN or not, make sure that bcmgenet_resume() disables the UniMAC MagicPacket matching mode and puts the hardware in a state where it can receive all incoming packets. Signed-off-by:
-
Florian Fainelli authored
bcmgenet_wol_resume() will create an unbalanced clock state for the wol_clk clock pointer since everywhere else in the code, we always call clk_prepare_enable() and clk_disable_unprepare(). This function also calls init_umac() which is neither correct nor necessary since bcmgenet_resume() and bcmgenet_open() already does that. Finally calling bcmgenet_wol_resume() in bcmgenet_open() is not correct, since the interface would not have been able to put us in Wake-on-LAN mode if it was not UP before. Signed-off-by:
-
Florian Fainelli authored
Handle UMAC_IRQ_MPD_R interrupt bit in our workqueue to make sure that we properly re-configure the GENET adapter from Wake-on-LAN. bcmgenet_power_up() makes sure that we will not leave the UniMAC hardware in MagicPacket matching mode, since that would prevent any other packet from being received. Signed-off-by:
-
Florian Fainelli authored
Update bcmgenet_power_{up,down} to handle the case where the adapter has been suspend respectively resumed from Wake-on-LAN using MagicPackets. Signed-off-by: -
Florian Fainelli authored
Add all the required code to program the GENET hardware to enter Wake-on-LAN mode and wake using MagicPackets with or without SecureOn password. This code is hooked to the build system, but is not yet referenced from ethtool or the main bcmgenet driver. Signed-off-by:
-
Florian Fainelli authored
Attempt to the request the Wake-on-LAN interrupt bit, and if successful, advertise wakeup capability instead of doing this unconditionnally. Signed-off-by:
-
Florian Fainelli authored
Implement suspend/resume callbacks in the GENET driver. This makes sure that we de-initialize and re-initialize the hardware correctly before entering suspend and when resuming. Signed-off-by:
-
Florian Fainelli authored
Introduce a bunch of helper functions: bcmgenet_netif_start, bcmgenet_netif_stop and bcmgenet_intr_disable to help reuse code that is going to be necessary for suspend/resume. Signed-off-by:
-
Florian Fainelli authored
Factor the code touching the UniMAC RX/TX enable bits since we are going to re-use it for implementing suspend/resume. Signed-off-by:
-
Florian Fainelli authored
Checking for wol_enabled in bcmgenet_close() is bogus, since no other code places set priv->wol_enabled. Remove that as it will conflict with the upcoming and functional Wake-on-LAN implementation. Signed-off-by:
-
Wei Yongjun authored
Fix to return -ENODEV from the no ports enabled error handling case instead of 0. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: net/tipc/socket.c:545:5: warning: symbol 'tipc_sk_proto_rcv' was not declared. Should it be static? net/tipc/socket.c:2015:5: warning: symbol 'tipc_ioctl' was not declared. Should it be static? Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
David S. Miller authored
Fabian Frederick says: ==================== drivers/net: remove unnecessary break after return Second patchset after "remove unnecessary break after goto" addressing break redundancy on drivers/net branch (suggested by Joe Perches) ==================== Signed-off-by: -
Fabian Frederick authored
Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
