Instead of using snprintf() to populate the ACPI object name in
int340x_thermal_set_trip_temp(), use an appropriate initializer
and make the function fail if its trip argument is greater than 9,
because ACPI object names can only be 4 characters long and it does
not make sense to even try to evaluate objects with longer names (that
argument is guaranteed to be non-negative, because it comes from the
thermal code that will not pass negative trip numbers to zone
callbacks).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

The explicit casting from int to unsigned long in
int340x_thermal_get_zone_temp() is pointless, becuase the multiplication
result is cast back to int by the assignment in the same statement, so
drop it.

No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Rename local variables int34x_thermal_zone in int340x_thermal_zone_add()
and int340x_thermal_zone_remove() to int34x_zone which allows a number
of code lines to be shorter and easier to read and adjust some white
space for consistency.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Improve some inconsistent usage of white space in int340x_thermal_zone.c,
fix up one coding style issue in it (missing braces around an else
branch of a conditional) and while at it replace a !ACPI_FAILURE()
check with an equivalent ACPI_SUCCESS() one.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

It is slightly better to make the ACPI thermal helper functions retrieve
the trip point temperature only instead of doing the full trip point
initialization, because they are also used for updating some already
registered trip points, in which case initializing a new trip just
in order to update the temperature of an existing one is somewhat
wasteful.

Modify the ACPI thermal helpers accordingly and update their users.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Modify int340x_thermal_zone_add() to register the thermal zone along
with a trip points table, which allows the trip-related zone callbacks
to be dropped, because they are not needed any more.

In order to consolidate the code, use ACPI trip library functions to
populate generic trip points in int340x_thermal_read_trips() and to
update them in int340x_thermal_update_trips().
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because the ->get_trip_temp() and ->get_trip_type() thermal zone
callbacks are only invoked from __thermal_zone_get_trip() which is
always called by the thermal core under the zone lock, it is sufficient
for int340x_thermal_update_trips() to acquire the zone lock for mutual
exclusion with those callbacks.

Accordingly, modify int340x_thermal_update_trips() to use the zone lock
instead of the internal trip_mutex and drop the latter which is not
necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is generally invalid to change the trip point indices after they have
been exposed via sysfs.

Moreover, the thermal objects in the ACPI namespace cannot go away and
appear on the fly.  In practice, the only thing that can happen when the
INT3403_PERF_TRIP_POINT_CHANGED notification is sent by the platform
firmware is a change of the return values of those thermal objects.

For this reason, add a special function for updating the trip point
temperatures after re-evaluating the respective ACPI thermal objects
and change int3403_notify() to invoke it instead of
int340x_thermal_read_trips() that would change the trip point indices
on errors.  Also remove the locking from the latter, because it is only
called before registering the thermal zone and it cannot race with the
zone's callbacks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In some cases it is still useful to register a trip point if the
temperature returned by the corresponding ACPI thermal object (for
example, _HOT) is invalid to start with, because the same ACPI
thermal object may start to return a valid temperature after a
system configuration change (for example, from an AC power source
to battery an vice versa).

For this reason, if the ACPI thermal object evaluated by
thermal_acpi_trip_init() successfully returns a temperature value that
is out of the range of values taken into account, initialize the trip
point using THERMAL_TEMP_INVALID as the temperature value instead of
returning an error to allow the user of the trip point to decide what
to do with it.

Also update pch_wpt_add_acpi_psv_trip() to reject trip points with
invalid temperature values.

Fixes: 7a0e3974 ("thermal: ACPI: Add ACPI trip point routines")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Make proc_thermal_pci_probe() register the TCPU_PCI thermal zone along
with the trip point used by it and drop the zone callbacks related to
this trip point that are not needed any more.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is possible that the system manufacturer locks down thermal tuning
beyond what is usually done on the given platform. In that case user
space calibration tools should not try to adjust the thermal
configuration of the system.

To allow user space to check if that is the case, add a new sysfs
attribute "production_mode" that will be present when the ACPI DCFG
method is present under the INT3400 device object in the ACPI Namespace.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In order to prevent int340x_thermal_get_trip_type() from possibly
racing with int340x_thermal_read_trips() invoked by int3403_notify()
add locking to it in analogy with int340x_thermal_get_trip_temp().

Fixes: 6757a7ab ("thermal: intel: int340x: Protect trip temperature from concurrent updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().

But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.

To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().

Fixes: 5fbf7f27 ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal framework gives the possibility to register the trip
points along with the thermal zone.  When that is done, no get_trip_*
callbacks are needed and they can be removed.

Convert the existing callbacks content logic into generic trip points
initialization code and register them along with the thermal zone.

In order to consolidate the code, use an ACPI trip library function
to populate a generic trip point.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Add library routines to populate a generic thermal trip point
structure with data obtained by evaluating a specific object in the
ACPI Namespace.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Add the PCI ID for the Wellsburg C610 series chipset PCH.

The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* thermal: (734 commits)
  thermal: core: call put_device() only after device_register() fails
  Linux 6.2-rc4
  kbuild: Fix CFI hash randomization with KASAN
  firmware: coreboot: Check size of table entry and use flex-array
  kallsyms: Fix scheduling with interrupts disabled in self-test
  ata: pata_cs5535: Don't build on UML
  lockref: stop doing cpu_relax in the cmpxchg loop
  x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
  efi: tpm: Avoid READ_ONCE() for accessing the event log
  io_uring: lock overflowing for IOPOLL
  ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
  iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
  iommu/iova: Fix alloc iova overflows issue
  iommu: Fix refcount leak in iommu_device_claim_dma_owner
  iommu/arm-smmu-v3: Don't unregister on shutdown
  iommu/arm-smmu: Don't unregister on shutdown
  iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
  platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
  ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
  platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
  ...

Pull another io_uring fix from Jens Axboe:
 "Just a single fix for a regression that happened in this release due
  to a poll change. Normally I would've just deferred it to next week,
  but since the original fix got picked up by stable, I think it's
  better to just send this one off separately.

  The issue is around the poll race fix, and how it mistakenly also got
  applied to multishot polling. Those don't need the race fix, and we
  should not be doing any reissues for that case. Exhaustive test cases
  were written and committed to the liburing regression suite for the
  reported issue, and additions for similar issues"

* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
  io_uring/poll: don't reissue in case of poll race on multishot request

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc and other subsystem driver fixes for
  6.2-rc5 to resolve a few reported issues. They include:

   - long time pending fastrpc fixes (should have gone into 6.1, my
     fault)

   - mei driver/bus fixes and new device ids

   - interconnect driver fixes for reported problems

   - vmci bugfix

   - w1 driver bugfixes for reported problems

  Almost all of these have been in linux-next with no reported problems,
  the rest have all passed 0-day bot testing in my tree and on the
  mailing lists where they have sat too long due to me taking a long
  time to catch up on my pending patch queue"

* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  VMCI: Use threaded irqs instead of tasklets
  misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
  gsmi: fix null-deref in gsmi_get_variable
  misc: fastrpc: Fix use-after-free race condition for maps
  misc: fastrpc: Don't remove map on creater_process and device_release
  misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
  misc: fastrpc: fix error code in fastrpc_req_mmap()
  mei: me: add meteor lake point M DID
  mei: bus: fix unlink on bus in error path
  w1: fix WARNING after calling w1_process()
  w1: fix deadloop in __w1_remove_master_device()
  comedi: adv_pci1760: Fix PWM instruction handling
  interconnect: qcom: rpm: Use _optional func for provider clocks
  interconnect: qcom: msm8996: Fix regmap max_register values
  interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
  dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC

Pull driver core fixes from Greg KH:
 "Here are three small driver and kernel core fixes for 6.2-rc5. They
  include:

   - potential gadget fixup in do_prlimit

   - device property refcount leak fix

   - test_async_probe bugfix for reported problem"

* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  prlimit: do_prlimit needs to have a speculation check
  driver core: Fix test_async_probe_init saves device in wrong array
  device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.2-rc5. It resolves a build
  issue reported and Fixed by Arnd in the vc04_services driver. It's
  been in linux-next this week with no reported problems"

* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_arm: fix enum vchiq_status return types

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
   messages when GNU Make 4.4 is used.

 - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.

 - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.

 - Support GNU Make 4.4 for scripts/jobserver-exec.

 - Show clearer error message when kernel/gen_kheaders.sh fails due to
   missing cpio.

* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: explicitly validate existence of cpio command
  scripts: support GNU make 4.4 in jobserver-exec
  kconfig: Update all declared targets
  scripts: rpm: make clear that mkspec script contains 4.13 feature
  init/Kconfig: fix LOCALVERSION_AUTO help text
  kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
  kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
  init/version-timestamp.c: remove unneeded #include <linux/version.h>
  docs: kbuild: remove mention to dropped $(objtree) feature

We potentially have old hashes of the xattr names generated on systems
with signed 'char' types.  Now that everybody uses '-funsigned-char',
those hashes will no longer match.

This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.

Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced.  In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull gpio fixes from Bartosz Golaszewski:

 - fix a potential race condition and always set GPIOs used as interrupt
   source to input in gpio-mxc

 - fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU

* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
  gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
  gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
  gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock

Pull cifs fixes from Steve French:

 - important fix for packet signature calculation error

 - three fixes to correct DFS deadlock, and DFS refresh problem

 - remove an unused DFS function, and duplicate tcon refresh code

 - DFS cache lookup fix

 - uninitialized rc fix

* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: remove unused function
  cifs: do not include page data when checking signature
  cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
  cifs: handle cache lookup errors different than -ENOENT
  cifs: remove duplicate code in __refresh_tcon()
  cifs: don't take exclusive lock for updating target hints
  cifs: avoid re-lookups in dfs_cache_find()
  cifs: fix potential deadlock in cache_refresh_path()

Pull pin control fixes from Linus Walleij:

 - Compilation fix for Sunplus sp7021

 - Add some missing headers after a cleanup to the Nomadik driver

 - Fix pull type and mux routes on Rockchip RK3568

* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: rockchip: fix mux route data for rk3568
  pinctrl: rockchip: fix reading pull type on rk3568
  pinctrl: nomadik: Add missing header(s)
  pinctrl: sp7021: fix unused function warning

Pull rdma fixes from Jason Gunthorpe:

 - Several hfi1 patches fixing some long standing driver bugs

 - Overflow when working with sg lists with elements greater than 4G

 - An rxe regression with object numbering after the mrs reach their
   limit

 - A theoretical problem with the scatterlist merging code

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to calculate the last_pg properly
  IB/hfi1: Remove user expected buffer invalidate race
  IB/hfi1: Immediately remove invalid memory from hardware
  IB/hfi1: Fix expected receive setup error exit issues
  IB/hfi1: Reserve user expected TIDs
  IB/hfi1: Reject a zero-length user expected buffer
  RDMA/core: Fix ib block iterator counter overflow
  RDMA/rxe: Prevent faulty rkey generation
  RDMA/rxe: Fix inaccurate constants in rxe_type_info

A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.

A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests.

Cc: stable@vger.kernel.org
Fixes: 6e5aedb9 ("io_uring/poll: attempt request issue after racy poll wakeup")
Reported-and-tested-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/778Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull block fixes from Jens Axboe:
 "Various little tweaks all over the place:

   - NVMe pull request via Christoph:
       - fix controller shutdown regression in nvme-apple (Janne Grunau)
       - fix a polling on timeout regression in nvme-pci (Keith Busch)

   - Fix a bug in the read request side request allocation caching
     (Pavel)

   - pktcdvd was brought back after we configured a NULL return on bio
     splits, make it consistent with the others (me)

   - BFQ refcount fix (Yu)

   - Block cgroup policy activation fix (Yu)

   - Fix for an md regression introduced in the 6.2 cycle (Adrian)"

* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
  nvme-pci: fix timeout request state check
  nvme-apple: only reset the controller when RTKit is running
  nvme-apple: reset controller during shutdown
  block: fix hctx checks for batch allocation
  block/rnbd-clt: fix wrong max ID in ida_alloc_max
  blk-cgroup: fix missing pd_online_fn() while activating policy
  pktcdvd: check for NULL returna fter calling bio_split_to_limits()
  block, bfq: switch 'bfqg->ref' to use atomic refcount apis
  md: fix incorrect declaration about claim_rdev in md_import_device

Pull io_uring fixes from Jens Axboe:
 "Fixes for the MSG_RING opcode. Nothing really major:

   - Fix an overflow missing serialization around posting CQEs to the
     target ring (me)

   - Disable MSG_RING on a ring that isn't enabled yet. There's nothing
     really wrong with allowing it, but 1) it's somewhat odd as nobody
     can receive them yet, and 2) it means that using the right delivery
     mechanism might change. As nobody should be sending CQEs to a ring
     that isn't enabled yet, let's just disable it (Pavel)

   - Tweak to when we decide to post remotely or not for MSG_RING
     (Pavel)"

* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
  io_uring/msg_ring: fix remote queue to disabled ring
  io_uring/msg_ring: fix flagging remote execution
  io_uring/msg_ring: fix missing lock on overflow for IOPOLL
  io_uring/msg_ring: move double lock/unlock helpers higher up

Pull btrfs fixes from David Sterba:

 - fix potential out-of-bounds access to leaf data when seeking in an
   inline file

 - fix potential crash in quota when rescan races with disable

 - reimplement super block signature scratching by marking page/folio
   dirty and syncing block device, allow removing write_one_page

* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix race between quota rescan and disable leading to NULL pointer deref
  btrfs: fix invalid leaf access due to inline extent during lseek
  btrfs: stop using write_one_page in btrfs_scratch_superblock
  btrfs: factor out scratching of one regular super block

Merge tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:
 "Fix an error seen during unconfigured LLVM builds"

* tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest: Fix error message for unconfigured LLVM builds

Pull thermal control fix from Rafael Wysocki:
 "Modify __thermal_cooling_device_register() to make it call
  put_device() after invoking device_register() and fix up a few error
  paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
  (Viresh Kumar)"

* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: call put_device() only after device_register() fails

Pull ACPI fixes from Rafael Wysocki:
 "These update the ACPICA entry in MAINTAINERS, add a backlight handling
  quirk and fix the ACPI PRM (platform runtime) mechanism support.

  Specifics:

   - Update the ACPICA development list address in MAINTAINERS to the
     new one that does not bounce (Rafael Wysocki)

   - Check whether EFI runtime is available when registering the ACPI
     PRM address space handler and when running it (Ard Biesheuvel)

   - Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
     video driver (Hans de Goede)"

* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PRM: Check whether EFI runtime is available
  ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
  MAINTAINERS: Update the ACPICA development list address