- 03 Mar, 2023 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA fix from Damien Le Moal: - Revert commit 104ff59a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI controller") as it is causing serious regressions (failure to boot) on some laptops * tag 'ata-6.3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull more s390 updates from Heiko Carstens: - Add empty command line parameter handling stubs to kernel for all command line parameters which are handled in the decompressor. This avoids invalid "Unknown kernel command line parameters" messages from the kernel, and also avoids that these will be incorrectly passed to user space. This caused already confusion, therefore add the empty stubs - Add missing phys_to_virt() handling to machine check handler - Introduce and use a union to be used for zcrypt inline assemblies. This makes sure that only a register wide member of the union is passed as input and output parameter to inline assemblies, while usual C code uses other members of the union to access bit fields of it - Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to atomically read a 128-bit value from memory. This replaces the (mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf code. Currently gcc does not generate the used lpq instruction if __READ_ONCE() is used for aligned 128-bit accesses, therefore use this s390 specific helper - Simplify machine check handler code if a task needs to be killed because of e.g. register corruption due to a machine malfunction - Perform CPU reset to clear pending interrupts and TLB entries on an already stopped target CPU before delegating work to it - Generate arch/s390/boot/vmlinux.map link map for the decompressor, when CONFIG_VMLINUX_MAP is enabled for debugging purposes - Fix segment type handling for dcssblk devices. It incorrectly always returned type "READ/WRITE" even for read-only segements, which can result in a kernel panic if somebody tries to write to a read-only device - Sort config S390 select list again - Fix two kprobe reenter bugs revealed by a recently added kprobe kunit test * tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kprobes: fix current_kprobe never cleared after kprobes reenter s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler s390/Kconfig: sort config S390 select list again s390/extmem: return correct segment type in __segment_load() s390/decompressor: add link map saving s390/smp: perform cpu reset before delegating work to target cpu s390/mcck: cleanup user process termination path s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg s390/rwonce: add READ_ONCE_ALIGNED_128() macro s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union s390/nmi: fix virtual-physical address confusion s390/setup: do not complain about parameters handled in decompressor
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Palmer Dabbelt: - Some cleanups and fixes for the Zbb-optimized string routines - Support for custom (vendor or implementation defined) perf events - COMMAND_LINE_SIZE has been increased to 1024 * tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Bump COMMAND_LINE_SIZE value to 1024 drivers/perf: RISC-V: Allow programming custom firmware events riscv, lib: Fix Zbb strncmp RISC-V: improve string-function assembly
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "A few drivers got some nice cleanups and a new driver are making the bulk of the changes. Subsystem: - allow rtc_read_alarm without read_alarm callback New driver: - NXP BBNSM module RTC Drivers: - use IRQ flags from fwnode when available - abx80x: nvmem support - brcmstb-waketimer: add non-wake alarm support - ingenic: provide CLK32K clock - isl12022: cleanups - moxart: switch to using gpiod API - pcf85363: allow setting quartz load - pm8xxx: cleanups and support for setting time - rv3028, rv3032: add ACPI support" * tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits) rtc: pm8xxx: add support for nvmem offset dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset rtc: abx80x: Add nvmem support rtc: rx6110: Remove unused of_gpio,h rtc: efi: Avoid spamming the log on RTC read failure rtc: isl12022: sort header inclusion alphabetically rtc: isl12022: Join string literals back rtc: isl12022: Drop unneeded OF guards and of_match_ptr() rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L rtc: isl12022: Get rid of unneeded private struct isl12022 rtc: pcf85363: add support for the quartz-load-femtofarads property dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding rtc: allow rtc_read_alarm without read_alarm callback rtc: rv3032: add ACPI support rtc: rv3028: add ACPI support rtc: bbnsm: Add the bbnsm rtc support rtc: jz4740: Register clock provider for the CLK32K pin rtc: jz4740: Use dev_err_probe() rtc: jz4740: Use readl_poll_timeout dt-bindings: rtc: Add #clock-cells property ...
-
Damien Le Moal authored
Commit 104ff59a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI controller") enabled low power mode for the Tiger Lake AHIC adapter in the author system but created regressions for others. Revert this patch for now until a better solution is found to make this adapter eco-friendly. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114 CC: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-
- 02 Mar, 2023 32 commits
-
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "fbdev: - fix uninit var in error path shmem: - revert unGPLing an export i915: - Don't use stolen memory or BAR mappings for ring buffers with LLC - Add inverted backlight quirk for HP 14-r206nv - Fix GSI offset for MCR lookups - GVT fixes (memleak, debugfs attributes, kconfig, typos) amdgpu: - SMU 13 fixes - Enable TMZ for GC 10.3.6 - Misc display fixes - Buddy allocator fixes - GC 11 fixes - S0ix fix - INFO IOCTL queries for GC 11 - VCN harvest fixes for SR-IOV - UMC 8.10 RAS fixes - Don't restrict bpc to 8 - NBIO 7.5 fix - Allow freesync on PCon for more devices amdkfd: - SDMA fix - Illegal memory access fix" * tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits) drm/amdgpu/vcn: fix compilation issue with legacy gcc drm/amd/display: Extend Freesync over PCon support for more devices Revert "drm/amd/display: Do not set DRR on pipe commit" drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes drm/amd/display: Ext displays with dock can't recognized after resume drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini drm/amdgpu: remove unused variable ring drm/amd/display: fix dm irq error message in gpu recover drm/amd: Fix initialization for nbio 7.5.1 drm/amd/display: Don't restrict bpc to 8 bpc drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable drm/radeon: Fix eDP for single-display iMac11,2 drm/shmem-helper: Revert accidental non-GPL export drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init() drm/amd/pm: downgrade log level upon SMU IF version mismatch drm/amdgpu: Add ecc info query interface for umc v8_10 drm/amdgpu: Add convert_error_address function for umc v8_10 drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err drm/amdgpu: change default behavior of bad_page_threshold parameter drm/amdgpu: exclude duplicate pages from UMC RAS UE count ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - In copy_highpage(), only reset the tag of the destination pointer if KASAN_HW_TAGS is enabled so that user-space MTE does not interfere with KASAN_SW_TAGS (which relies on top-byte-ignore). - Remove warning if SME is detected without SVE, the kernel can cope with such configuration (though none in the field currently). - In cfi_handler(), pass the ESR_EL1 value to die() for consistency with other die() callers. - Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte manipulation from the generic vmemmap_remap_pte() does not follow the required ARM break-before-make sequence (clear the pte, flush the TLBs, set the new pte). It may be re-enabled once this sequence is sorted. - Fix possible memory leak in the arm64 ACPI code if the SMCCC version and conduit checks fail. - Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores -falign-functions=N with -Os. - Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no randomisation would actually take place. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE arm64: acpi: Fix possible memory leak of ffh_ctxt arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP arm64: pass ESR_ELx to die() of cfi_handler arm64/fpsimd: Remove warning for SME without SVE arm64: Reset KASAN tag in copy_highpage with HW tags only
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.3-2023-03-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.3-2023-03-02: amdgpu: - SMU 13 fixes - Enable TMZ for GC 10.3.6 - Misc display fixes - Buddy allocator fixes - GC 11 fixes - S0ix fix - INFO IOCTL queries for GC 11 - VCN harvest fixes for SR-IOV - UMC 8.10 RAS fixes - Don't restrict bpc to 8 - NBIO 7.5 fix - Allow freesync on PCon for more devices amdkfd: - SDMA fix - Illegal memory access fix radeon: - Display fix for iMac11,2 UAPI: - Add some additional INFO IOCTL queries for GC 11 fixes Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302051843.7793-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2023-02-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v6.3-rc1: - Don't use stolen memory or BAR mappings for ring buffers with LLC - Add inverted backlight quirk for HP 14-r206nv - Fix GSI offset for MCR lookups - GVT fixes (memleak, debugfs attributes, kconfig, typos) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87cz5v2z0j.fsf@intel.com
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2023-02-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: Fixes uninitialized variables in fbdev error paths and reverts an SHMEM-helper symbol back to being exported as GPL. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y/3Fw1HjgPcplo+j@linux-uq9g
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - qcom-wdt dt-bindings improvements and additions (like MSM8994 and MDM9615) - mtk_wdt: Add reset_by_toprgu support - devm_clk_get_enabled() helper changes - Fix kmemleak in watchdog_cdev_register - watchdog sysfs improvements - Other fixes and small improvements * tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits) watchdog: at91rm9200: Only warn once about problems in .remove() watchdog: mt7621-wdt: avoid ralink architecture dependent code watchdog: mt7621-wdt: avoid static global declarations dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers watchdog: sbsa_wdog: Make sure the timeout programming is within the limits dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible watchdog: report options in sysfs watchdog: report fw_version in sysfs dt-bindings: watchdog: fsl-imx: document suspend in wait mode watchdog: imx2_wdg: suspend watchdog in WAIT mode watchdog: pcwd_usb: Fix attempting to access uninitialized memory dt-bindings: watchdog: qcom-wdt: merge MSM timer dt-bindings: watchdog: qcom-wdt: allow interrupts dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615 dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles dt-bindings: watchdog: qcom-wdt: do not allow fallback alone dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019 watchdog: Fix kmemleak in watchdog_cdev_register watchdog: Include <linux/kstrtox.h> when appropriate watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path ...
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Two small fixes from Xiubo and myself, marked for stable" * tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client: rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails ceph: update the time stamps and try to drop the suid/sgid
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull more MIPS updates from Thomas Bogendoerfer: "A few more cleanups and fixes" * tag 'mips_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Workaround clang inline compat branch issue mips: dts: ralink: mt7621: add phandle to system controller node for watchdog mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog' mips: ralink: make SOC_MT7621 select PINCTRL mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK MIPS: cevt-r4k: Offset the value used to clear compare interrupt MIPS: smp-cps: Don't rely on CP0_CMGCRBASE MIPS: Remove DMA_PERDEV_COHERENT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool updates from Ingo Molnar: - Shrink 'struct instruction', to improve objtool performance & memory footprint - Other maximum memory usage reductions - this makes the build both faster, and fixes kernel build OOM failures on allyesconfig and similar configs when they try to build the final (large) vmlinux.o - Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying single-byte instruction (PUSH/POP or LEAVE). This requires the extension of the ORC metadata structure with a 'signal' field - Misc fixes & cleanups * tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) objtool: Fix ORC 'signal' propagation objtool: Remove instruction::list x86: Fix FILL_RETURN_BUFFER objtool: Fix overlapping alternatives objtool: Union instruction::{call_dest,jump_table} objtool: Remove instruction::reloc objtool: Shrink instruction::{type,visited} objtool: Make instruction::alts a single-linked list objtool: Make instruction::stack_ops a single-linked list objtool: Change arch_decode_instruction() signature x86/entry: Fix unwinding from kprobe on PUSH/POP instruction x86/unwind/orc: Add 'signal' field to ORC metadata objtool: Optimize layout of struct special_alt objtool: Optimize layout of struct symbol objtool: Allocate multiple structures with calloc() objtool: Make struct check_options static objtool: Make struct entries[] static and const objtool: Fix HOSTCC flag usage objtool: Properly support make V=1 objtool: Install libsubcmd in build ...
-
https://github.com/ojeda/linuxLinus Torvalds authored
Pull auxdisplay fix from Miguel Ojeda: - hd44780: Fix potential memory leak in hd44780_remove() (Jianglei Nie) * tag 'auxdisplay-6.3' of https://github.com/ojeda/linux: auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()
-
Linus Torvalds authored
Merge tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is another small set of driver core patches. They resolve some reported problems with the previous driver core patches that are in your tree. They solve a problem with the bus_type cleanup as reported and fixed by Geert, and two fw_devlink changes to make debugging problems easier. There is one known outstanding problem with the fw_deflink changes in your tree that is still being worked on, and it looks like a clk core change will be submitted soon for that, probably after 6.3-rc1. All three of these have been in linux-next with no reported problems (only reports that they fixed problems)" * tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: fw_devlink: Print full path and name of fwnode driver core: fw_devlink: Avoid spurious error message driver core: bus: Handle early calls to bus_to_subsys()
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A small set of fixes for SPI drivers, Krishna has been doing a bunch of work on Tegra210 QuadSPI and found a bunch of issues there and there's a couple of small fixes for other drivers too" * tag 'spi-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: tegra210-quad: Fix iterator outside loop spi: tegra210-quad: Fix validate combined sequence spi: tegra210-quad: set half duplex flag spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits spi: cadence-quadspi: Fix cancel the indirect read mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "Two fixes here, one driver fix for incorrect error codes and a fix in the core to use ktime_get_boottime() in order to fix accounting of the time regulators have been powered down over suspend. ktime_get() pauses over suspend which is not what we want" * tag 'regulator-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Use ktime_get_boottime() to determine how long a regulator was off regulator: max597x: Fix error return code in max597x_get_status
-
Vasily Gorbik authored
Recent test_kprobe_missed kprobes kunit test uncovers the following problem. Once kprobe is triggered from another kprobe (kprobe reenter), all future kprobes on this cpu are considered as kprobe reenter, thus pre_handler and post_handler are not being called and kprobes are counted as "missed". Commit b9599798 ("[S390] kprobes: activation and deactivation") introduced a simpler scheme for kprobes (de)activation and status tracking by using push_kprobe/pop_kprobe, which supposed to work for both initial kprobe entry as well as kprobe reentry and helps to avoid handling those two cases differently. The problem is that a sequence of calls in case of kprobes reenter: push_kprobe() <- NULL (current_kprobe) push_kprobe() <- kprobe1 (current_kprobe) pop_kprobe() -> kprobe1 (current_kprobe) pop_kprobe() -> kprobe1 (current_kprobe) leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it to NULL. In fact push_kprobe/pop_kprobe can only store a single state (there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but sufficient, there is no need to have another prev_kprobe just to store NULL. To make a simple and backportable fix simply reset "prev_kprobe" when kprobe is poped from this "stack". No need to worry about "kprobe_status" in this case, because its value is only checked when current_kprobe != NULL. Cc: stable@vger.kernel.org Fixes: b9599798 ("[S390] kprobes: activation and deactivation") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Vasily Gorbik authored
Recent test_kprobe_missed kprobes kunit test uncovers the following error (reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled): BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 no locks held by kunit_try_catch/662. irq event stamp: 280 hardirqs last enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0 hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318 softirqs last enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G N 6.2.0-173644-g44c18d77f0c0 #2 Hardware name: IBM 3931 A01 704 (LPAR) Call Trace: [<00000003e60a3a00>] dump_stack_lvl+0x120/0x198 [<00000003e3d02e82>] __might_resched+0x60a/0x668 [<00000003e60b9908>] __mutex_lock+0xc0/0x14e0 [<00000003e60bad5a>] mutex_lock_nested+0x32/0x40 [<00000003e3f7b460>] unregister_kprobe+0x30/0xd8 [<00000003e51b2602>] test_kprobe_missed+0xf2/0x268 [<00000003e51b5406>] kunit_try_run_case+0x10e/0x290 [<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8 [<00000003e3ce30f8>] kthread+0x2d0/0x398 [<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8 [<00000003e60ccada>] ret_from_fork+0xa/0x40 The reason for this error report is that kprobes handling code failed to restore irqs. The problem is that when kprobe is triggered from another kprobe post_handler current sequence of enable_singlestep / disable_singlestep is the following: enable_singlestep <- original kprobe (saves kprobe_saved_imask) enable_singlestep <- kprobe triggered from post_handler (clobbers kprobe_saved_imask) disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask) disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask) There is just one kprobe_ctlblk per cpu and both calls saves and loads irq mask to kprobe_saved_imask. To fix the problem simply move resume_execution (which calls disable_singlestep) before calling post_handler. This also fixes the problem that post_handler is called with pt_regs which were not yet adjusted after single-stepping. Cc: stable@vger.kernel.org Fixes: 4ba069b8 ("[S390] add kprobes support.") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Uwe Kleine-König authored
The single difference between returning 0 and returning an error code in a platform remove callback is that in the latter case the platform core emits a warning about the error being ignored. at91wdt_remove() already emits a warning in the error case, so suppress the more generic (and less helpful) one by returning 0. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230217095317.1213387-1-u.kleine-koenig@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-
Sergio Paracuellos authored
MT7621 SoC has a system controller node. Watchdog need to access to reset status register. Ralink architecture and related driver are old and from the beggining they are using some architecture dependent operations for accessing this shared registers through 'asm/mach-ralink/ralink_regs.h' header file. However this is not ideal from a driver perspective which can just access to the system controller registers in an arch independent way using regmap syscon APIs. Update Kconfig accordingly to select new added dependencies and allow driver to be compile tested. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-
Sergio Paracuellos authored
Instead of using static global definitions in driver code, refactor code introducing a new watchdog driver data structure and use it along the code. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com [groeck: unsigned -> unsigned int] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-
Sergio Paracuellos authored
MT7621 SoC provides a system controller node for accessing to some registers. Add a phandle in this node to avoid using MIPS related arch operations and includes in watchdog driver code. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230214103936.1061078-2-sergio.paracuellos@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-
bobzhou authored
This patch is used to fix following compilation issue with legacy gcc error: ‘for’ loop initial declarations are only allowed in C99 mode for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) { Signed-off-by: bobzhou <bob.zhou@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Sung Joon Kim authored
[why] More branch devices are able to support Freesync over PCon so include them in the list of supporting devices. [how] Add more compatible PCon devices in the whitelist for Freesync over Pcon. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
This reverts commit 4f1b5e73. [Why & How] Original change causes a regression. Revert until fix is available. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Hung authored
[WHY] When PTEBufferSizeInRequests is zero, UBSAN reports the following warning because dml_log2 returns an unexpected negative value: shift exponent 4294966273 is too large for 32-bit type 'int' [HOW] In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and assign the result directly. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Ryan Lin authored
[Why] Needs to set the default value of the LTTPR timeout after resume. [How] Set the default (3.2ms) timeout at resuming if the sink supports LTTPR Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Horatio Zhang authored
The call trace occurs when the amdgpu is removed after the mode1 reset. During mode1 reset, from suspend to resume, there is no need to reinitialize the ta firmware buffer which caused the bo pin_count increase redundantly. [ 489.885525] Call Trace: [ 489.885525] <TASK> [ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm] [ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu] [ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu] [ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu] [ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu] [ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0 [ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 489.886132] ? __pm_runtime_resume+0x60/0x90 [ 489.886134] pci_device_remove+0x3e/0xb0 [ 489.886135] __device_release_driver+0x1ab/0x2a0 [ 489.886137] driver_detach+0xf3/0x140 [ 489.886138] bus_remove_driver+0x6c/0xf0 [ 489.886140] driver_unregister+0x31/0x60 [ 489.886141] pci_unregister_driver+0x40/0x90 [ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu] Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Signed-off-by: longlyao <Longlong.Yao@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Tom Rix authored
building with gcc and W=1 reports drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable ‘ring’ set but not used [-Werror=unused-but-set-variable] 81 | struct amdgpu_ring *ring; | ^~~~ ring is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
tiancyin authored
[Why] Variable adev->crtc_irq.num_types was initialized as the value of adev->mode_info.num_crtc at early_init stage, later at hw_init stage, the num_crtc changed due to the display pipe harvest on some SKUs, but the num_types was not updated accordingly, that cause below error in gpu recover. *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 [How] Defer the initialization of num_types to eliminate the error logs. Signed-off-by: tiancyin <tianci.yin@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Mario Limonciello authored
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1 where some NBIO registers aren't properly setup. Ensure that they're set during initialization. Tested-by: Richard Gong <richard.gong@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
-
Harry Wentland authored
This will let us pass the kms_hdr.bpc_switch IGT test. The reason the bpc restriction was required is historical. At one point in time we were not falling back to a lower bpc when we didn't have enough bandwidth for the maximum bpc reported by a display. This meant that we couldn't enable some high refresh modes unless we limitted the bpc. Starting with this patch the issue is fixed: commit cbd14ae7 ("drm/amd/display: Fix incorrectly pruned modes with deep color") This patch implemented a fallback mechanism if mode validation failed at the max bpc. This means users now automatically get all modes that can be supported by at least 6 bpc. The driver will enable the mode with the highest possible bpc that is supported by the display. v2: - explain why this is no longer needed (Michel) - refer to commit that fixed bpc fallback (Michel) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Sebastian Wick <sebastian.wick@redhat.com> Cc: Vitaly.Prosyak@amd.com Cc: Joshua Ashton <joshua@froggi.es> Cc: dri-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: Michel Dänzer <michel.daenzer@mailbox.org> Reviewed-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Candice Li authored
Fixes following warnings: warning: no previous prototype for 'umc_v8_10_convert_error_address' warning: variable 'channel_index' set but not used Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Mark Hawrylak authored
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on driver load. This patch treats iMac11,2 the same as iMac10,1, so the eDP panel stays active. Additional steps: Kernel boot parameter radeon.nomodeset=0 required to keep the eDP panel active. This patch is an extension of commit 564d8a2c ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)") Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alexandre Ghiti authored
Increase COMMAND_LINE_SIZE as the current default value is too low for syzbot kernel command line. There has been considerable discussion on this patch that has led to a larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all ports. That's not quite done yet, but it's gotten far enough we're confident this is not a uABI change so this is safe. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr [Palmer: it's not uabi] Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#tSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-
- 01 Mar, 2023 3 commits
-
-
Mayuresh Chitale authored
Applications need to be able to program the SBI implementation specific or custom firmware events in addition to the standard firmware events. Remove a check in the driver that prohibits the programming of the custom firmware events. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230208074314.3661406-1-mchitale@ventanamicro.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fix from Chuck Lever: - Make new GSS Kerberos Kunit tests work on non-x86 platforms * tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Properly terminate test case arrays SUNRPC: Let Kunit tests run with some enctypes compiled out
-
Heiko Carstens authored
Keep the config S390 select list sorted. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-