- 23 Jun, 2016 8 commits
-
-
Romain Perier authored
So far, the 'process' operation was used to check if the current request was correctly handled by the engine, if it was the case it copied information from the SRAM to the main memory. Now, we split this operation. We keep the 'process' operation, which still checks if the request was correctly handled by the engine or not, then we add a new operation for completion. The 'complete' method copies the content of the SRAM to memory. This will soon become useful if we want to call the process and the complete operations from different locations depending on the type of the request (different cleanup logic). Signed-off-by:
Romain Perier <romain.perier@free-electrons.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Romain Perier authored
Currently, the only way to access the tdma chain is to use the 'req' union from a mv_cesa_{ablkcipher,ahash}. This will soon become a problem if we want to handle the TDMA chaining vs standard/non-DMA processing in a generic way (with generic functions at the cesa.c level detecting whether the request should be queued at the DMA level or not). Hence the decision to move the chain field a the mv_cesa_req level at the expense of adding 2 void * fields to all request contexts (including non-DMA ones) and to remove the type completly. To limit the overhead, we get rid of the type field, which can now be deduced from the req->chain.first value. Once these changes are done the union is no longer needed, so remove it and move mv_cesa_ablkcipher_std_req and mv_cesa_req to mv_cesa_ablkcipher_req directly. There are also no needs to keep the 'base' field into the union of mv_cesa_ahash_req, so move it into the upper structure. Signed-off-by: -
Romain Perier authored
Add a TDMA descriptor at the end of the request for copying the output IV vector via a DMA transfer. This is a good way for offloading as much as processing as possible to the DMA and the crypto engine. This is also required for processing multiple cipher requests in chained mode, otherwise the content of the IV vector would be overwritten by the last processed request. Signed-off-by:
-
Romain Perier authored
So far, the way that the type of a TDMA operation was checked was wrong. We have to use the type mask in order to get the right part of the flag containing the type of the operation. Signed-off-by:
-
Romain Perier authored
Add a BUG_ON() call when the driver tries to launch a crypto request while the engine is still processing the previous one. This replaces a silent system hang by a verbose kernel panic with the associated backtrace to let the user know that something went wrong in the CESA driver. Signed-off-by:
-
Romain Perier authored
Adding a macro constant to be used for the size of the crypto queue, instead of using a numeric value directly. It will be easier to maintain in case we add more than one crypto queue of the same size. Signed-off-by:
-
Herbert Xu authored
On 16-byte requests the optimised version is actually slower than the generic code, so we should simply use that instead. Signed-off-by: -
Herbert Xu authored
This patch commit eed1e1af as it is only a workaround for the real bug and the proper fix has now been applied as 055ddaac ("crypto: user - re-add size check for CRYPTO_MSG_GETALG"). Signed-off-by:
-
- 20 Jun, 2016 7 commits
-
-
Dan Carpenter authored
We accidentally return PTR_ERR(NULL) which is success but we should return -ENOMEM. Fixes: 35591285 ('crypto: drbg - use CTR AES instead of ECB AES') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
raveendra padasalagi authored
Added support for SHA-3 algorithm test's in tcrypt module and related test vectors. Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by:
-
Jeff Garzik authored
This patch adds the implementation of SHA3 algorithm in software and it's based on original implementation pushed in patch https://lwn.net/Articles/518415/ with additional changes to match the padding rules specified in SHA-3 specification. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Tudor Ambarus authored
EXTRA_CFLAGS is still supported but its usage is deprecated. Signed-off-by:
Tudor Ambarus <tudor-dan.ambarus@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Arnd Bergmann authored
An endianess fix mistakenly used higher_32_bits() instead of upper_32_bits(), and that doesn't exist: drivers/crypto/caam/desc_constr.h: In function 'append_ptr': drivers/crypto/caam/desc_constr.h:84:75: error: implicit declaration of function 'higher_32_bits' [-Werror=implicit-function-declaration] *offset = cpu_to_caam_dma(ptr); Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 261ea058 ("crypto: caam - handle core endianness != caam endianness") Reviewed-by:
-
Herbert Xu authored
As it is if you ask for a sync gcm you may actually end up with an async one because it does not filter out async implementations of ghash. This patch fixes this by adding the necessary filter when looking for ghash. Cc: stable@vger.kernel.org Signed-off-by: -
Wu Fengguang authored
crypto/drbg.c:1637:39-40: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Stephan Mueller <smueller@chronox.de> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
-
- 15 Jun, 2016 5 commits
-
-
Tudor Ambarus authored
Return the raw key with no other processing so that the caller can copy it or MPI parse it, etc. The scope is to have only one ANS.1 parser for all RSA implementations. Update the RSA software implementation so that it does the MPI conversion on top. Signed-off-by:
-
Stephan Mueller authored
The TFM object maintains the key for the CTR DRBG. Signed-off-by:
-
Stephan Mueller authored
The CTR DRBG update function performs a full CTR AES operation including the XOR with "plaintext" data. Hence, remove the XOR from the code and use the CTR mode to do the XOR. Signed-off-by:
-
Stephan Mueller authored
Hardware cipher implementation may require aligned buffers. All buffers that potentially are processed with a cipher are now aligned. Signed-off-by:
-
Stephan Mueller authored
The CTR DRBG derives its random data from the CTR that is encrypted with AES. This patch now changes the CTR DRBG implementation such that the CTR AES mode is employed. This allows the use of steamlined CTR AES implementation such as ctr-aes-aesni. Unfortunately there are the following subtile changes we need to apply when using the CTR AES mode: - the CTR mode increments the counter after the cipher operation, but the CTR DRBG requires the increment before the cipher op. Hence, the crypto_inc is applied to the counter (drbg->V) once it is recalculated. - the CTR mode wants to encrypt data, but the CTR DRBG is interested in the encrypted counter only. The full CTR mode is the XOR of the encrypted counter with the plaintext data. To access the encrypted counter, the patch uses a NULL data vector as plaintext to be "encrypted". Signed-off-by:
-
- 13 Jun, 2016 3 commits
-
-
Neil Armstrong authored
Add support for the Amlogic Meson SoCs hardware random generator. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Ben Dooks authored
The __raw IO functions are not endian safe, so use the readl_relaxed and writel_relaxed versions of these. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
Bhaktipriya Shridhar authored
alloc_workqueue replaces deprecated create_workqueue(). The workqueue device_reset_wq has workitem &reset_data->reset_work per adf_reset_dev_data. The workqueue pf2vf_resp_wq is a workqueue for PF2VF responses has workitem &pf2vf_resp->pf2vf_resp_work per pf2vf_resp. The workqueue adf_vf_stop_wq is used to call adf_dev_stop() asynchronously. Dedicated workqueues have been used in all cases since the workitems on the workqueues are involved in operation of crypto which can be used in the IO path which is depended upon during memory reclaim. Hence, WQ_MEM_RECLAIM has been set to gurantee forward progress under memory pressure. Since there are only a fixed number of work items, explicit concurrency limit is unnecessary. Signed-off-by:
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 08 Jun, 2016 7 commits
-
-
LEROY Christophe authored
This will allow IPSEC on SEC1 Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
LEROY Christophe authored
SEC1 doesn't have IPSEC_ESP descriptor type but it is able to perform IPSEC using HMAC_SNOOP_NO_AFEU, which is also existing on SEC2 In order to be able to define descriptors templates for SEC1 without breaking SEC2+, we have to give lower priority to HMAC_SNOOP_NO_AFEU so that SEC2+ selects IPSEC_ESP and not HMAC_SNOOP_NO_AFEU which is less performant. This is done by adding a priority field in the template. If the field is 0, we use the default priority, otherwise we used the one in the field. Signed-off-by:
-
LEROY Christophe authored
Signed-off-by:
-
LEROY Christophe authored
This patchs enhances the IPSEC_ESP related functions for them to also supports the same operations with descriptor type HMAC_SNOOP_NO_AFEU. The differences between the two descriptor types are: * pointeurs 2 and 3 are swaped (Confidentiality key and Primary EU Context IN) * HMAC_SNOOP_NO_AFEU has CICV out in pointer 6 * HMAC_SNOOP_NO_AFEU has no primary EU context out so we get it from the end of data out Signed-off-by: -
LEROY Christophe authored
In preparation of IPSEC for SEC1, first step is to make the mapping helpers more generic so that they can also be used by AEAD functions. First, the functions are moved before IPSEC functions in talitos.c talitos_sg_unmap() and unmap_sg_talitos_ptr() are merged as they are quite similar, the second one handling the SEC1 case an calling the first one for SEC2 map_sg_in_talitos_ptr() and map_sg_out_talitos_ptr() are merged into talitos_sg_map() and enhenced to support offseted zones as used for AEAD. The actual mapping is now performed outside that helper. The DMA sync is also done outside to not make it several times. talitos_edesc_alloc() size calculation are fixed to also take into account AEAD specific parts also for SEC1 Signed-off-by:
-
LEROY Christophe authored
In order to be able to use the mapping/unmapping helpers for IPSEC it needs to be move upper in the file Signed-off-by:
-
LEROY Christophe authored
Use helper for all modifications to talitos_ptr in preparation to the implementation of AEAD for SEC1 to_talitos_ptr_extent_clear() has been removed in favor of to_talitos_ptr_ext_set() to set any value and to_talitos_ptr_ext_or() to or the extent field with a value name has been shorten to help keeping single lines of 80 chars Signed-off-by:
-
- 07 Jun, 2016 6 commits
-
-
Horia Geantă authored
LS1043A has a SEC v5.4 security engine. For now don't add rtic or sec_mon subnodes, since these features haven't been tested yet. Signed-off-by:
-
Bob Ham authored
The first read on an Alea takes about 1.8 seconds, more than the timeout value waiting for the read. As a consequence, later URB reuse causes the warning given below. To avoid this, we increase the wait time for the first read on the Alea. [ 78.293247] WARNING: CPU: 3 PID: 1892 at drivers/usb/core/urb.c:338 usb_submit_urb+0x2b4/0x580 [usbcore] [ 78.293250] URB ffff8802135be3c0 submitted while active [ 78.293252] Modules linked in: chaoskey(+) rng_core rfcomm binfmt_misc bnep cfg80211 nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc bridge stp llc tun snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support nls_utf8 nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel efi_pstore kvm irqbypass pcspkr btusb btrtl btbcm btintel uvcvideo joydev bluetooth videobuf2_vmalloc videobuf2_memops efivars videobuf2_v4l2 serio_raw i2c_i801 videobuf2_core videodev cdc_mbim media lpc_ich shpchp mfd_core cdc_ncm usbnet mii cdc_wdm cdc_acm evdev snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core i915 snd_pcm snd_timer i2c_algo_bit drm_kms_helper wmi thinkpad_acpi drm nvram mei_me mei snd soundcore rfkill ac battery i2c_core [ 78.293335] video button tpm_tis tpm fuse parport_pc ppdev lp parport autofs4 ext4 crc16 jbd2 mbcache algif_skcipher af_alg hid_generic usbhid hid dm_crypt dm_mod sg sr_mod cdrom sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel jitterentropy_rng sha256_generic hmac drbg aesni_intel xhci_pci aes_x86_64 ahci glue_helper xhci_hcd ehci_pci lrw libahci gf128mul ablk_helper cryptd libata sdhci_pci psmouse sdhci scsi_mod ehci_hcd mmc_core usbcore usb_common thermal [ 78.293402] CPU: 3 PID: 1892 Comm: hwrng Not tainted 4.7.0-rc1-linux-14+ #16 [ 78.293405] Hardware name: LENOVO 232577G/232577G, BIOS G2ET92WW (2.52 ) 02/22/2013 [ 78.293408] 0000000000000000 ffffffff812dfa0f ffff8801fa5b3d68 0000000000000000 [ 78.293413] ffffffff81072224 ffff8802135be3c0 ffff8801fa5b3db8 ffff880212e44210 [ 78.293418] 0000000000000040 ffff880209fb32c0 ffff880212e44200 ffffffff8107228f [ 78.293422] Call Trace: [ 78.293432] [<ffffffff812dfa0f>] ? dump_stack+0x5c/0x7d [ 78.293437] [<ffffffff81072224>] ? __warn+0xc4/0xe0 [ 78.293441] [<ffffffff8107228f>] ? warn_slowpath_fmt+0x4f/0x60 [ 78.293451] [<ffffffff810a46a2>] ? enqueue_task_fair+0xcd2/0x1260 [ 78.293463] [<ffffffffa001ec54>] ? usb_submit_urb+0x2b4/0x580 [usbcore] [ 78.293474] [<ffffffff8140c2e5>] ? __pm_runtime_resume+0x55/0x70 [ 78.293484] [<ffffffffa0825212>] ? _chaoskey_fill+0x132/0x250 [chaoskey] [ 78.293485] usbcore: registered new interface driver chaoskey [ 78.293493] [<ffffffff810aed50>] ? wait_woken+0x90/0x90 [ 78.293500] [<ffffffffa06448c0>] ? devm_hwrng_register+0x80/0x80 [rng_core] [ 78.293505] [<ffffffffa0825907>] ? chaoskey_rng_read+0x127/0x140 [chaoskey] [ 78.293511] [<ffffffffa06448c0>] ? devm_hwrng_register+0x80/0x80 [rng_core] [ 78.293515] [<ffffffffa064492e>] ? hwrng_fillfn+0x6e/0x120 [rng_core] [ 78.293520] [<ffffffff8108fb5f>] ? kthread+0xcf/0xf0 [ 78.293529] [<ffffffff81596d5f>] ? ret_from_fork+0x1f/0x40 [ 78.293535] [<ffffffff8108fa90>] ? kthread_park+0x50/0x50 Signed-off-by:
Bob Ham <bob.ham@collabora.com> Signed-off-by:
-
Bob Ham authored
Adds support for the Araneus Alea I USB hardware Random Number Generator which is interfaced with in exactly the same way as the Altus Metrum ChaosKey. We just add the appropriate device ID and modify the config help text. Signed-off-by:
-
Giovanni Cabiddu authored
Move hash to 0xe to free up the space for acomp/scomp Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
-
Geliang Tang authored
Remove unused header cpumask.h from crypto/ablkcipher.c. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Lokesh Vutla authored
Algorithms can be registered only once. So skip registration of algorithms if already registered (i.e. in case we have two AES cores in the system.) Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
- 02 Jun, 2016 2 commits
-
-
Megha Dey authored
Currently there are several checkpatch warnings in the sha1_mb.c file: 'WARNING: line over 80 characters' in the sha1_mb.c file. Also, the syntax of some multi-line comments are not correct. This patch fixes these issues. Signed-off-by:
Megha Dey <megha.dey@linux.intel.com> Signed-off-by:
-
Stephan Mueller authored
The CTR DRBG code always set the key for each sym cipher invocation even though the key has not been changed. The patch ensures that the setkey is only invoked when a new key is generated by the DRBG. With this patch, the CTR DRBG performance increases by more than 150%. Signed-off-by:
-
- 31 May, 2016 2 commits
-
-
Krzysztof Kozlowski authored
Bring some consistency by: 1. Replacing fixed-space indentation of structure members with just tabs. 2. Remove indentation in declaration of local variable between type and name. Driver was mixing usage of such indentation and lack of it. When removing indentation, reorder variables in reversed-christmas-tree order with first variables being initialized ones. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Yendapally Reddy Dhananjaya Reddy authored
Read the requested number of data from the fifo Signed-off-by:
Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
