Add support for plugging in passthrough path. When plugging is enabled, the
requests are added to a plug instead of getting dispatched to the driver.
And when the plug is finished, the whole batch gets dispatched via
->queue_rqs which turns out to be more efficient. Otherwise dispatching
used to happen via ->queue_rq, one request at a time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-3-joshi.k@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

file_operations->uring_cmd is a file private handler.
This is somewhat similar to ioctl but hopefully a lot more sane and
useful as it can be used to enable many io_uring capabilities for the
underlying operation.

IORING_OP_URING_CMD is a file private kind of request. io_uring doesn't
know what is in this command type, it's for the provider of ->uring_cmd()
to deal with.
Co-developed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-2-joshi.k@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This adds support for filling the extra1 and extra2 fields for large
CQE's.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-13-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This enables large CQE's in the uring setup.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-12-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This exposes the extra1 and extra2 fields in the /proc output.
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-11-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This adds tracing for the extra1 and extra2 fields.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-10-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This adds the overflow processing for large CQE's.

This adds two parameters to the io_cqring_event_overflow function and
uses these fields to initialize the large CQE fields.

Allocate enough space for large CQE's in the overflow structue. If no
large CQE's are used, the size of the allocation is unchanged.

The cqe field can have a different size depending if its a large
CQE or not. To be able to allocate different sizes, the two fields
in the structure are re-ordered.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-9-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This flushes the completions according to their CQE type: the same
processing is done for the default CQE size, but for large CQE's the
extra1 and extra2 fields are filled in.
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-8-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Modify accesses to the CQE array to take large CQE's into account. The
index needs to be shifted by one for large CQE's.
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-7-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This adds the completion processing for the large CQE's and makes sure
that the extra1 and extra2 fields are passed through.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-6-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This adds two new function to setup and fill the CQE32 result structure.
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-5-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This changes the function rings_size to take large CQE's into account.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-4-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This reuses the hash list node for the storage we need to hold the two
64-bit values that must be passed back.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-3-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This adds the big_cqe array to the struct io_uring_cqe to support large
CQE's.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-2-shr@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Normal SQEs are 64-bytes in length, which is fine for all the commands
we support. However, in preparation for supporting passthrough IO,
provide an option for setting up a ring with 128-byte SQEs.

We continue to use the same type for io_uring_sqe, it's marked and
commented with a zero sized array pad at the end. This provides up
to 80 bytes of data for a passthrough command - 64 bytes for the
extra added data, and 16 bytes available at the end of the existing
SQE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

* for-5.19/io_uring-socket:
  io_uring: use the text representation of ops in trace
  io_uring: rename op -> opcode
  io_uring: add io_uring_get_opcode
  io_uring: add type to op enum
  io_uring: add socket(2) support
  net: add __sys_socket_file()
  io_uring: fix trace for reduced sqe padding
  io_uring: add fgetxattr and getxattr support
  io_uring: add fsetxattr and setxattr support
  fs: split off do_getxattr from getxattr
  fs: split off setxattr_copy and do_setxattr function from setxattr

* for-5.19/io_uring: (85 commits)
  io_uring: don't clear req->kbuf when buffer selection is done
  io_uring: eliminate the need to track provided buffer ID separately
  io_uring: move provided buffer state closer to submit state
  io_uring: move provided and fixed buffers into the same io_kiocb area
  io_uring: abstract out provided buffer list selection
  io_uring: never call io_buffer_select() for a buffer re-select
  io_uring: get rid of hashed provided buffer groups
  io_uring: always use req->buf_index for the provided buffer group
  io_uring: ignore ->buf_index if REQ_F_BUFFER_SELECT isn't set
  io_uring: kill io_rw_buffer_select() wrapper
  io_uring: make io_buffer_select() return the user address directly
  io_uring: kill io_recv_buffer_select() wrapper
  io_uring: use 'sr' vs 'req->sr_msg' consistently
  io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg
  io_uring: check IOPOLL/ioprio support upfront
  io_uring: replace smp_mb() with smp_mb__after_atomic() in io_sq_thread()
  io_uring: add IORING_SETUP_TASKRUN_FLAG
  io_uring: use TWA_SIGNAL_NO_IPI if IORING_SETUP_COOP_TASKRUN is used
  io_uring: set task_work notify method at init time
  io-wq: use __set_notify_signal() to wake workers
  ...

It's not needed as the REQ_F_BUFFER_SELECTED flag tracks the state of
whether or not kbuf is valid, so just drop it.
Suggested-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have io_kiocb->buf_index which is used for either fixed buffers, or
for provided buffers. For the latter, it's used to hold the buffer group
ID for buffer selection. Post selection, req->kbuf->bid is used to get
the buffer ID.

Store the buffer ID, when selected, in req->buf_index. If we do end up
recycling the buffer, reset it back to the buffer group ID.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The timeout and other items that follow are less hot, so let's move the
provided buffer state above that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

These are mutually exclusive - if you use provided buffers, then you
cannot use fixed buffers and vice versa. Move them into the same spot
in the io_kiocb, which is also advantageous for provided buffers as
they get near the submit side hot cacheline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In preparation for providing another way to select a buffer, move the
existing logic into a helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Callers already have room to store the addr and length information,
clean it up by having the caller just assign the previously provided
data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use a plain array for any group ID that's less than 64, and punt
anything beyond that to an xarray. 64 fits in a page even for 4KB
page sizes and with the planned additions.

This makes the expected group usage faster by avoiding a hash and lookup
to find our list, and it uses less memory upfront by not allocating any
memory for provided buffers unless it's actually being used.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The read/write opcodes use it already, but the recv/recvmsg do not. If
we switch them over and read and validate this at init time while we're
checking if the opcode supports it anyway, then we can do it in one spot
and we don't have to pass in a separate group ID for io_buffer_select().
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's no point in validity checking buf_index if the request doesn't
have REQ_F_BUFFER_SELECT set, as we will never use it for that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

After the recent changes, this is direct call to io_buffer_select()
anyway. With this change, there are no wrappers left for provided
buffer selection.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's no point in having callers provide a kbuf, we're just returning
the address anyway.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull parisc architecture fixes from Helge Deller:
 "Some reverts of existing patches, which were necessary because of boot
  issues due to wrong CPU clock handling and cache issues which led to
  userspace segfaults with 32bit kernels. Dave has a whole bunch of
  upcoming cache fixes which I then plan to push in the next merge
  window.

  Other than that just small updates and fixes, e.g. defconfig updates,
  spelling fixes, a clocksource fix, boot topology fixes and a fix for
  /proc/cpuinfo output to satisfy lscpu"

* tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  Revert "parisc: Increase parisc_cache_flush_threshold setting"
  parisc: Mark cr16 clock unstable on all SMP machines
  parisc: Fix typos in comments
  parisc: Change MAX_ADDRESS to become unsigned long long
  parisc: Merge model and model name into one line in /proc/cpuinfo
  parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
  parisc: Update 32- and 64-bit defconfigs
  parisc: Only list existing CPUs in cpu_possible_mask
  Revert "parisc: Fix patch code locking and flushing"
  Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
  Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"

Pull powerpc fixes from Michael Ellerman:

 - Fix the DWARF CFI in our VDSO time functions, allowing gdb to
   backtrace through them correctly.

 - Fix a buffer overflow in the papr_scm driver, only triggerable by
   hypervisor input.

 - A fix in the recently added QoS handling for VAS (used for
   communicating with coprocessors).

Thanks to Alan Modra, Haren Myneni, Kajol Jain, and Segher Boessenkool.

* tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
  powerpc/vdso: Fix incorrect CFI in gettimeofday.S
  powerpc/pseries/vas: Use QoS credits from the userspace

Pull x86 fix from Thomas Gleixner:
 "A fix and an email address update:

   - Prevent FPU state corruption.

     The condition in irq_fpu_usable() grants FPU usage when the FPU is
     not used in the kernel. That's just wrong as it does not take the
     fpregs_lock()'ed regions into account. If FPU usage happens within
     such a region from interrupt context, then the FPU state gets
     corrupted.

     That's a long standing bug, which got unearthed by the recent
     changes to the random code.

   - Josh wants to use his kernel.org email address"

* tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Prevent FPU state corruption
  MAINTAINERS: Update Josh Poimboeuf's email address

Pull timer fix from Thomas Gleixner:
 "A fix and an email address update:

   - Mark the NMI safe time accessors notrace to prevent tracer
     recursion when they are selected as trace clocks.

   - John Stultz has a new email address"

* tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Mark NMI safe time accessors as notrace
  MAINTAINERS: Update email address for John Stultz

This reverts commit a58e9d09.

Triggers segfaults with 32-bit kernels on PA8500 machines.
Signed-off-by: Helge Deller <deller@gmx.de>

Pull irq fix from Thomas Gleixner:
 "A fix for the threaded interrupt core.

  A quick sequence of request/free_irq() can result in a hang because
  the interrupt thread did not reach the thread function and got stopped
  in the kthread core already. That leaves a state active counter
  arround which makes a invocation of synchronized_irq() on that
  interrupt hang forever.

  Ensure that the thread reached the thread function in request_irq() to
  prevent that"

* tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Synchronize interrupt thread startup

Pull locking fixlet from Thomas Gleixner:
 "Just a email address update for MAINTAINERS and mailmap"

* tag 'locking-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: MAINTAINERS, .mailmap: Update André's email address

The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.
Signed-off-by: Helge Deller <deller@gmx.de>

Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Helge Deller <deller@gmx.de>

Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
	MAX_ADDRESS   (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>

The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org