- 14 Sep, 2022 1 commit
-
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/all/20220914134030.3782754-1-yangyingliang@huawei.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- 06 Sep, 2022 9 commits
-
-
Marc Kleine-Budde authored
Ziyang Xuan <william.xuanziyang@huawei.com> says: Do some small optimizations for can_raw. Link: https://lore.kernel.org/all/cover.1661584485.git.william.xuanziyang@huawei.comSigned-off-by:
-
Ziyang Xuan authored
We can use guard clause to optimize nesting codes like if (condition) { ... } else { return; } in raw_rcv(); Signed-off-by:Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/all/0170ad1f07dbe838965df4274fce950980fa9d1f.1661584485.git.william.xuanziyang@huawei.comSigned-off-by:
-
Ziyang Xuan authored
Now, register notifier after register proto successfully. It can create raw socket and set socket options once register proto successfully, so it is possible missing notifier event before register notifier successfully although this is a low probability scenario. Move notifier registration to the front of proto registration like done in j1939. In addition, register_netdevice_notifier() may fail, check its result is necessary. Signed-off-by:
-
Dario Binacchi authored
The Amarula contact info email address is wrong, so fix it up to use the correct one. Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20220828134442.794990-1-dario.binacchi@amarulasolutions.comSigned-off-by:
-
Krzysztof Kozlowski authored
reg-io-width is a standard property, so no need for defining its type Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/20220823101011.386970-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length array declaration in union es58x_urb_cmd with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for a flexible-array member in a union. Link: https://github.com/KSPP/linux/issues/193 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.htmlSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/Yw00w6XRcq7B6ub6@workSigned-off-by:
-
Marc Kleine-Budde authored
Marc Kleine-Budde <mkl@pengutronix.de> says: after noticing that the gs_usb firmware sends timestamps on the TX, too, I updated the driver and squashed the 2nd patch. Also added proper endianness handling to gs_usb_get_timestamp(). I allowed to add myself as Co-developed-by. Changes since v2: https://lore.kernel.org/all/20220827092545.2971240-1-mkl@pengutronix.de - new patch 1/2: use common spelling of GS_USB in macros - squashed both old patches into now 2/2 - use GS_USB instead of GSUSB in macros - gs_usb_get_timestamp(): renamed from gs_usb_get_sof_timestamp() - gs_usb_get_timestamp(): take care of endianness - gs_usb_skb_set_timestamp(): renamed from gs_usb_set_timestamp() - gs_usb_set_timestamp(): add new function to add timestamp to skb from struct gs_host_frame - add support for TX timestamps - gs_can_eth_ioctl(): return -EOPNOTSUPP if device doesn't support GS_CAN_FEATURE_HW_TIMESTAMP - gs_usb_get_ts_info(): renamed from gs_usb_get_ts_info_hwts() - gs_usb_get_ts_info(): call can_ethtool_op_get_ts_info_hwts() if device supports GS_CAN_FEATURE_HW_TIMESTAMP, call ethtool_op_get_ts_info() otherwise Changes since v1: https://lore.kernel.org/all/20220826104629.2837024-1-mkl@pengutronix.de - add new includes sorted - adjust multi line comment style - don't use 1e6, but 1 * HZ_PER_MHZ, to fix sparse warning - use __le32 instead of u32 in struct classic_can_ts and canfd_ts - place _ts in front of _quirk in union in struct gs_host_frame - gs_usb_get_sof_timestamp(): pass "const struct gs_can *dev" as 1st argument, not struct net_device *netdev, simplify return handling - gs_usb_timestamp_init(), gs_usb_timestamp_stop(), gs_usb_get_ts_info_hwts(): make static - gs_usb_timestamp_init(): increase cc->shift to maximize precision - fix long lines, remove braces {} for single statement blocks - gs_can_open(): move check for GS_CAN_FEATURE_HW_TIMESTAMP after all ctrlmode checks - gs_can_open(): move start polling sof timestamp after kfree(dm) - gs_can_close(): move stop polling sof timestamp to be symmetric with respect to gs_can_open() - gs_usb_probe(): make calculation of dev->hf_size_rx more robust Link: https://lore.kernel.org/all/20220827221548.3291393-1-mkl@pengutronix.deSigned-off-by:
-
John Whittington authored
Add support for hardware timestamps, if the firmware includes it as a feature via the GS_CAN_FEATURE_HW_TIMESTAMP flag. Check for this feature during probe, extend the RX expected length if it is and enable it during open. The struct classic_can_ts and struct canfd_ts are extended to include the µs timestamp following data as defined in the firmware. The timestamp is then captured and set using skb_hwtstamps() on each RX and TX. The frame µs timestamp is provided from a 32 bit 1 MHz timer which rolls over every 4294 seconds, so a cyclecounter, timecounter, and delayed worker are used to convert the timer into a proper ns timestamp - same implementation as commit efd8d98d ("can: mcp251xfd: add HW timestamp infrastructure"). Hardware timestamps are added to capabilities as commit b1f6b93e ("can: mcp251xfd: advertise timestamping capabilities and add ioctl support"). Signed-off-by:
John Whittington <git@jbrengineering.co.uk> Link: https://github.com/candle-usb/candleLight_fw/issues/100 Link: https://lore.kernel.org/all/20220827221548.3291393-3-mkl@pengutronix.deCo-developed-by:
-
Marc Kleine-Budde authored
There are a few macros in the driver which use GSUSB in the name of the macro, while the majority uses GS_USB. Convert all macros to GS_USB. Fixes: d08e973a ("can: gs_usb: Added support for the GS_USB CAN devices") Fixes: b00ca070 ("can: gs_usb: activate quirks for CANtact Pro unconditionally") Link: https://lore.kernel.org/all/20220827221548.3291393-2-mkl@pengutronix.deSigned-off-by:
-
- 05 Sep, 2022 30 commits
-
-
Jinpeng Cui authored
Return value directly from readl_poll_timeout() instead of getting value from redundant variable ret. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Jinpeng Cui <cui.jinpeng2@zte.com.cn> Link: https://lore.kernel.org/all/20220831150805.305106-1-cui.jinpeng2@zte.com.cnSigned-off-by:
-
Jinpeng Cui authored
Return value directly from register_candev() instead of getting value from redundant variable ret. Reported-by:
-
Biju Das authored
The SJA1000 CAN controller on RZ/N1 SoC has no clock divider register (CDR) support compared to others. This patch adds support for RZ/N1 SJA1000 CAN Controller, by adding SoC specific compatible to handle this difference as well as using clk framework to retrieve the CAN clock frequency. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/20220710115248.190280-7-biju.das.jz@bp.renesas.comSigned-off-by:
-
Biju Das authored
Document RZ/N1 power-domains support. Also update the example with power-domains property. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20220830164518.1381632-2-biju.das.jz@bp.renesas.comSigned-off-by:
-
Kenneth Lee authored
Use kzalloc(...) rather than kcalloc(1, ...) since because the number of elements we are specifying in this case is 1, kzalloc would accomplish the same thing and we can simplify. Also refactor how we calculate the sizeof() as checkstyle for kzalloc() prefers using the variable we are assigning to versus the type of that variable for calculating the size to allocate. Signed-off-by:
Kenneth Lee <klee33@uw.edu> Link: https://lore.kernel.org/all/20220807051656.1991446-1-klee33@uw.eduSigned-off-by:
-
Christophe JAILLET authored
devm_clk_get() can return -EPROBE_DEFER, so use dev_err_probe() instead of dev_err() in order to be less verbose in the log. This also saves a few LoC. While at it, turn a "goto fail_dev;" at the beginning of the function into a direct return in order to avoid mixing goto and return, which looks spurious. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/all/f5bf0b8f757bd3bc9b391094ece3548cc2f96456.1659858686.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Marc Kleine-Budde authored
Fix typo "FLEXCAN_QUIRK_SUPPPORT_*" -> "FLEXCAN_QUIRK_SUPPORT_". Link: https://lore.kernel.org/all/20220811093617.1861938-3-mkl@pengutronix.de Fixes: f04aefd4 ("can: flexcan: mark RX via mailboxes as supported on MCF5441X") Fixes: c5c88591 ("can: flexcan: add more quirks to describe RX path capabilities") Signed-off-by:
-
Marc Kleine-Budde authored
Fix typo "rounted" -> "rounded". Link: https://lore.kernel.org/all/20220811093617.1861938-2-mkl@pengutronix.de Fixes: d254586c ("can: rx-offload: Add support for HW fifo based irq offloading") Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Heiner Kallweit authored
We're not in a hot path and don't want to miss this message, therefore remove the net_ratelimit() check. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(), switch from __nlmsg_put to nlmsg_put(), and explain the bounds check for dealing with the memcpy() across a composite flexible array struct. Avoids this future run-time warning: memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16) Cc: Jakub Kicinski <kuba@kernel.org> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: syzbot <syzkaller@googlegroups.com> Cc: netfilter-devel@vger.kernel.org Cc: coreteam@netfilter.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Sean Anderson authored
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in clause 70. Clause 73 autonegotiation is mandatory, and only full duplex operation is supported. Although at the PMA level this interface mode is identical to 1000BASE-X, it uses a different form of in-band autonegation. This justifies a separate interface mode, since the interface mode (along with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation which will be used on a link. This results in more than just electrical differences between the link modes. With regard to 1000BASE-X, 1000BASE-KX holds a similar position to SGMII: same signaling, but different autonegotiation. PCS drivers (which typically handle in-band autonegotiation) may only support 1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to configure serdes phys with phy_set_mode_ext. Due to the different electrical standards (SFI or XFI vs Clause 70), they will likely want to use different configuration. Adding a phy interface mode for 1000BASE-KX helps simplify configuration in these areas. Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Signed-off-by:
-
David S. Miller authored
Sean Anderson says: ==================== net: dpaa: Cleanups in preparation for phylink conversion (part 2) This series contains several cleanup patches for dpaa/fman. While they are intended to prepare for a phylink conversion, they stand on their own. This series was originally submitted as part of [1]. [1] https://lore.kernel.org/netdev/20220715215954.1449214-1-sean.anderson@seco.com Changes in v5: - Reduce line length of tgec_config - Reduce line length of qman_update_cgr_safe - Rebase onto net-next/master Changes in v4: - weer -> were - tricy -> tricky - Use mac_dev for calling change_addr - qman_cgr_create -> qman_create_cgr Changes in v2: - Fix prototype for dtsec_initialization - Fix warning if sizeof(void *) != sizeof(resource_size_t) - Specify type of mac_dev for exception_cb - Add helper for sanity checking cgr ops - Add CGR update function - Adjust queue depth on rate change ==================== Signed-off-by:
-
Sean Anderson authored
Instead of setting the queue depth once during probe, adjust it on the fly whenever we configure the link. This is a bit unusal, since usually the DPAA driver calls into the FMAN driver, but here we do the opposite. We need to add a netdev to struct mac_device for this, but it will soon live in the phylink config. I haven't tested this extensively, but it doesn't seem to break anything. We could possibly optimize this a bit by keeping track of the last rate, but for now we just update every time. 10GEC probably doesn't need to call into this at all, but I've added it for consistency. Signed-off-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
-
Sean Anderson authored
This adds a function to update a CGR with new parameters. qman_create_cgr can almost be used for this (with flags=0), but it's not suitable because it also registers the callback function. The _safe variant was modeled off of qman_cgr_delete_safe. However, we handle multiple arguments and a return value. Signed-off-by:
-
Sean Anderson authored
This breaks out/combines get_affine_portal and the cgr sanity check in preparation for the next commit. No functional change intended. Signed-off-by:
-
Sean Anderson authored
There are several references to mac_dev in dpaa_netdev_init. Make things a bit more concise by adding a local variable for it. Signed-off-by:
-
Sean Anderson authored
When disabling, there is nothing we can do about errors. In fact, the only error which can occur is misuse of the API. Just warn in the mac driver instead. Signed-off-by:
-
Sean Anderson authored
This removes the _return label, since something like err = -EFOO; goto _return; can be replaced by the briefer return -EFOO; Additionally, this skips going to _return_of_node_put when dev_node has already been put (preventing a double put). Signed-off-by:
-
Sean Anderson authored
Instead of using a void pointer for mac_dev, specify its type explicitly. Signed-off-by:
-
Sean Anderson authored
Some params are already present in mac_dev. Use them directly instead of passing them through params. Signed-off-by:
-
Sean Anderson authored
Instead of having the mac init functions call back into the fman core to get their params, just pass them directly to the init functions. Signed-off-by:
-
Sean Anderson authored
We don't need to remap the base address from the resource twice (once in mac_probe() and again in set_fman_mac_params()). We still need the resource to get the end address, but we can use a single function call to get both at once. While we're at it, use platform_get_mem_or_io and devm_request_resource to map the resource. I think this is the more "correct" way to do things here, since we use the pdev resource, instead of creating a new one. It's still a bit tricky, since we need to ensure that the resource is a child of the fman region when it gets requested. Signed-off-by:
-
Sean Anderson authored
This member was used to pass the phy node between mac_probe and the mac-specific initialization function. But now that the phy node is gotten in the initialization function, this parameter does not serve a purpose. Remove it, and do the grabbing of the node/grabbing of the phy in the same place. Signed-off-by:
-
Sean Anderson authored
There are several small functions which were only necessary because the initialization functions didn't have access to the mac private data. Now that they do, just do things directly. Signed-off-by:
-
Sean Anderson authored
These methods are no longer accessed outside of the driver file, so mark them as static. Signed-off-by:
-
Sean Anderson authored
This moves mac-specific initialization to mac-specific files. This will make it easier to work with individual macs. It will also make it easier to refactor the initialization to simplify the control flow. No functional change intended. Signed-off-by:
-
Heiner Kallweit authored
Let's trust the hardware here and remove this useless check. Signed-off-by:
-
David S. Miller authored
Arun Ramadoss says: ==================== net: dsa: microchip: lan937x: enable interrupt for internal phy link detection This patch series enables the internal phy link detection for lan937x using the interrupt method. lan937x acts as the interrupt controller for the internal ports and phy, the irq_domain is registered for the individual ports and in turn for the individual port interrupts. RFC v3 -> Patch v1 - Removed the RFC v3 1/3 from the series - changing exit from reset - Changed the variable name in ksz_port from irq to pirq - Added the check for return value of irq_find_mapping during phy irq registeration. - Moved the clearing of POR_READY_INT from girq_thread_fn to lan937x_reset_switch RFC v2 -> v3 - Used the interrupt controller implementation of phy link Changes in RFC v2 - fixed the compilation issue ==================== Signed-off-by: -
Arun Ramadoss authored
This patch enables the interrupts for internal phy link detection for LAN937x. The interrupt enable bits are active low. There is global interrupt mask for each port. And each port has the individual interrupt mask for TAS. QCI, SGMII, PTP, PHY and ACL. The first level of interrupt domain is registered for global port interrupt and second level of interrupt domain for the individual port interrupts. The phy interrupt is enabled in the lan937x_mdio_register function. Interrupt from which port is raised will be detected based on the interrupt host data. Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Arun Ramadoss authored
In the lan937x_reset_switch(), it masks all the switch and port registers. In the Global_Int_status register, POR ready bit is write 1 to clear bit and all other bits are read only. So, this patch clear the por_ready_int status bit by writing 1. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
