UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software.  Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique.  Linus Torvalds argued:

 "Do we actually need this?

  I'd rather let it bitrot, and just let it return random versions. It
  will just start again at 2.4.60, won't it?

  Anybody who uses UNAME26 for a 5.x kernel might as well think it's
  still 4.x. The user space is so old that it can't possibly care about
  differences between 4.x and 5.x, can it?

  The only thing that matters is that it shows "2.4.<largeenough>",
  which it will do regardless"
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "A bigger batch than I anticipated this week, for two reasons:

   - Some fallout on Davinci from board file -> DTB conversion, that
     also includes a few longer-standing fixes (i.e. not recent
     regressions).

   - drivers/reset material that has been in linux-next for a while, but
     didn't get sent to us until now for a variety of reasons
     (maintainer out sick, holidays, etc). There's a functional
     dependency in there such that one platform (Altera's SoCFPGA) won't
     boot without one of the patches; instead of reverting the patch
     that got merged, I looked at this set and decided it was small
     enough that I'll pick it up anyway. If you disagree I can revisit
     with a smaller set.

  That being said, there's also a handful of the usual stuff:

   - Fix for a crash on Armada 7K/8K when the kernel touches
     PSCI-reserved memory

   - Fix for PCIe reset on Macchiatobin (Armada 8K development board,
     what this email is sent from in fact :)

   - Enable a few new-merged modules for Amlogic in arm64 defconfig

   - Error path fixes on Integrator

   - Build fix for Renesas and Qualcomm

   - Initialization fix for Renesas RZ/G2E

  .. plus a few more fixlets"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  ARM: integrator: impd1: use struct_size() in devm_kzalloc()
  qcom-scm: Include <linux/err.h> header
  gpio: pl061: handle failed allocations
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries
  arm64: defconfig: enable modules for amlogic s400 sound card
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ...

Pull btrfs fixes from David Sterba:

 - two regression fixes in clone/dedupe ioctls, the generic check
   callback needs to lock extents properly and wait for io to avoid
   problems with writeback and relocation

 - fix deadlock when using free space tree due to block group creation

 - a recently added check refuses a valid fileystem with seeding device,
   make that work again with a quickfix, proper solution needs more
   intrusive changes

* tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Use real device structure to verify dev extent
  Btrfs: fix deadlock when using free space tree due to block group creation
  Btrfs: fix race between reflink/dedupe and relocation
  Btrfs: fix race between cloning range ending at eof and writeback

Pull driver core fixes from Greg KH:
 "Here is one small sysfs change, and a documentation update for 5.0-rc2

  The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
  an email thread on lkml while trying to track down another driver bug.
  sysfs should not be crashing and preventing people from seeing where
  they went wrong. Now it properly recovers and warns the developer.

  The documentation update removes the use of BUS_ATTR() as the kernel
  is moving away from this to use the specific BUS_ATTR_RW() and friends
  instead. There are pending patches in all of the different subsystems
  to remove the last users of this macro, but for now, don't advertise
  it should be used anymore to keep new ones from being introduced.

  Both have been in linux-next with no reported issues"

* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: driver core: remove use of BUS_ATTR
  sysfs: convert BUG_ON to WARN_ON

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for some reported issues.

  One reverts a patch that was made to the rtl8723bs driver that turned
  out to not be needed at all as it was a bug in clang. The others fix
  up some reported issues in the rtl8188eu driver and update the
  MAINTAINERS file to point to Larry for this driver so he can get the
  bug reports easier.

  All have been in linux-next with no reported issues"

* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
  staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
  staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
  MAINTAINERS: Add entry for staging driver r8188eu

Pull tty/serial fixes from Greg KH:
 "Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
  issues.

  The first is a simple serial driver fix for a regression that showed
  up in 5.0-rc1. The second one resolves a number of reported issues
  with the recent tty locking fixes that went into 5.0-rc1. Lots of
  people have tested the second one and say it resolves their issues.

  Both have been in linux-next with no reported issues"

* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Don't hold ldisc lock in tty_reopen() if ldisc present
  serial: lantiq: Do not swap register read/writes

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and quirk updates for 5.0-rc2.

  The majority here are some quirks for some storage devices to get them
  to work properly. There's also a fix here to resolve the reported
  issues with some audio devices that say they are UAC3 compliant, but
  really are not.

  And a fix up for the MAINTAINERS file to remove a dead url.

  All have been in linux-next with no reported issues"

* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: storage: Remove outdated URL from MAINTAINERS
  USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
  usbcore: Select only first configuration for non-UAC3 compliant devices
  USB: storage: add quirk for SMI SM3350
  USB: storage: don't insert sane sense for SPC3+ when bad sense specified
  usb: cdc-acm: send ZLP for Telit 3G Intel based modems

Pull cifs fixes from Steve French:
 "A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
  fix an important set of crediting (flow control) problems, and also
  two problems in cifs_writepages, ddressing some large i/o and also
  compounding issues"

* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  CIFS: Fix error paths in writeback code
  CIFS: Move credit processing to mid callbacks for SMB3
  CIFS: Fix credits calculation for cancelled requests
  cifs: Fix potential OOB access of lock element array
  cifs: Limit memory used by lock request calls to a page
  cifs: move large array from stack to heap
  CIFS: Do not hide EINTR after sending network packets
  CIFS: Fix credit computation for compounded requests
  CIFS: Do not set credits to 1 if the server didn't grant anything
  CIFS: Fix adjustment of credits for MTU requests
  cifs: Fix a tiny potential memory leak
  cifs: Fix a debug message

Late reset controller changes for v5.0

This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.

* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
  reset: socfpga: add an early reset driver for SoCFPGA
  reset: fix null pointer dereference on dev by dev_name
  reset: Add reset_control_get_count()
  reset: Improve reset controller kernel docs
  ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu fixes for 5.0

They are all device tree fixes which also worth being in stable:

 - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
   this area and crashing while doing it.

 - Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)

 - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes

Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.

* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: impd1: use struct_size() in devm_kzalloc()
  gpio: pl061: handle failed allocations
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes

Amlogic DT fixes for v5.0-rc
- arm64: defconfig: enable modules for amlogic s400 sound card

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: defconfig: enable modules for amlogic s400 sound card
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes

Qualcomm Driver Fixes for 5.0-rc1

* Add required includes into qcom_scm.h

* tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  qcom-scm: Include <linux/err.h> header
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

This pull request fixes some more regressions on legacy
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.

Also has fixes for some long standing Audio issues on DA850
boards.

* tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Renesas ARM Based SoC Fixes for v5.0

Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols

RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver

* tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
  ARM: shmobile: fix build regressions
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit 49e54187 ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.

Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.

Fix the build by:

    1) Renaming Marvell's defined value to a more scoped name,
       in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.

    2) Adding the missing enum, which was going to be added anyway as part
       of [1].

[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com

Fixes: 49e54187 ("ata: libahci_platform: comply to PHY framework")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph, with little fixes all over the map

 - Loop caching fix for offset/bs change (Jaegeuk Kim)

 - Block documentation tweaks (Jeff, Jon, Weiping, John)

 - null_blk zoned tweak (John)

 - ahch mvebu suspend/resume support. Should have gone into the merge
   window, but there was some confusion on which tree had it. (Miquel)

* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
  ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
  ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
  ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
  ata: ahci: mvebu: remove stale comment
  ata: libahci_platform: comply to PHY framework
  loop: drop caches if offset or block_size are changed
  block: fix kerneldoc comment for blk_attempt_plug_merge()
  nvme: don't initlialize ctrl->cntlid twice
  nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
  nvme: pad fake subsys NQN vid and ssvid with zeros
  nvme-multipath: zero out ANA log buffer
  nvme-fabrics: unset write/poll queues for discovery controllers
  nvme-tcp: don't ask if controller is fabrics
  nvme-tcp: remove dead code
  nvme-pci: fix out of bounds access in nvme_cqe_pending
  nvme-pci: rerun irq setup on IO queue init errors
  nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
  nvme-pci: fix the wrong setting of nr_maps
  block: doc: add slice_idle_us to bfq documentation
  block: clarify documentation for blk_{start|finish}_plug
  ...

Pull dma_zalloc_coherent() removal from Christoph Hellwig:
 "We've always had a weird situation around dma_zalloc_coherent. To
  safely support mapping the allocations to userspace major
  architectures like x86 and arm have always zeroed allocations from
  dma_alloc_coherent, but a couple other architectures were missing that
  zeroing either always or in corner cases.

  Then later we grew anothe dma_zalloc_coherent interface to explicitly
  request zeroing, but that just added __GFP_ZERO to the allocation
  flags, which for some allocators that didn't end up using the page
  allocator ended up being a no-op and still not zeroing the
  allocations.

  So for this merge window I fixed up all remaining architectures to
  zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
  no-op wrapper around dma_alloc_coherent, which fixes all of the above
  issues.

  dma_zalloc_coherent is now pointless and can go away, and Luis helped
  me writing a cocchinelle script and patch series to kill it, which I
  think we should apply now just after -rc1 to finally settle these
  issue"

* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: remove dma_zalloc_coherent()
  cross-tree: phase out dma_zalloc_coherent() on headers
  cross-tree: phase out dma_zalloc_coherent()

Pull KVM fixes from Radim Krčmář:
 "Minor fixes for new code, corner cases, and documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
  Documentation/virtual/kvm: Update URL for AMD SEV API specification
  KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
  kvm: sev: Fail KVM_SEV_INIT if already initialized
  KVM: validate userspace input in kvm_clear_dirty_log_protect()
  KVM: x86: Fix bit shifting in update_intel_pt_cfg

Pull more drm fixes from Daniel Vetter:
 "Dave sends out his pull, everybody remembers holidays are over :-)

  Since Dave's already in weekend mode and it was quite a few patches I
  figured better to apply all the pulls and forward them to you. Hence
  here 2nd part of bugfixes for -rc2.

  nouveau:
   - backlight fix
   - falcon register access fix
   - fan fix.

  i915:
   - Disable PSR for Apple panels
   - Broxton ERR_PTR error state fix
   - Kabylake VECS workaround fix
   - Unwind failure on pinning the gen7 ppgtt
   - GVT workload request allocation fix

  core:
   - Fix fb-helper to work correctly with SDL 1.2 bugs
   - Fix lockdep warning in the atomic ioctl and setproperty"

* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/falcon: avoid touching registers if engine is off
  drm/nouveau: Don't disable polling in fallback mode
  drm/nouveau: register backlight on pascal and newer
  drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
  drm/i915: init per-engine WAs for all engines
  drm/i915: Unwind failure on pinning the gen7 ppgtt
  drm/i915: Skip the ERR_PTR error state
  drm/i915: Disable PSR in Apple panels
  gpu/drm: Fix lock held when returning to user space.
  drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
  drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
  drm/i915/gvt: Fix workload request allocation before request add

A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.

While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.

Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.

The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.

Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.

Fixes: 15d3ce7b ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c ("ARM: mvebu: prepare pm-board.c for the
                      introduction of Armada 38x support")
commit 3cbd6a6c ("ARM: mvebu: Add standby support")

For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.

There are even suspend/resume hooks in this driver since:
commit d6ecf158 ("ata: ahci_mvebu: add suspend/resume support")

Remove the stale comment at the end of this driver stating that all
the above does not exist yet.

Fixes: d6ecf158 ("ata: ahci_mvebu: add suspend/resume support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().

PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull i2c fixes from Wolfram Sang:
 "I2C has one core and one driver bugfix for you"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Fix Maximum transfer size
  i2c: dev: prevent adapter retries and timeout being set as minus value

Pull arm64 fixes from Will Deacon:
 "Another handful of arm64 fixes here. Most of the complication comes
  from improving our kpti code to avoid lengthy pauses (30+ seconds)
  during boot when we rewrite the page tables. There are also a couple
  of IORT fixes that came in via Lorenzo.

  Summary:

   - Don't error in kexec_file_load if kaslr-seed is missing in
     device-tree

   - Fix incorrect argument type passed to iort_match_node_callback()

   - Fix IORT build failure when CONFIG_IOMMU_API=n

   - Fix kpti performance regression with new rodata default option

   - Typo fix"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
  ACPI/IORT: Fix rc_dma_get_range()
  arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
  arm64: asm-prototypes: Fix fat-fingered typo in comment
  ACPI/IORT: Fix build when CONFIG_IOMMU_API=n

Pull ceph updates from Ilya Dryomov:
 "A patch to allow setting abort_on_full and a fix for an old "rbd
  unmap" edge case, marked for stable"

* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
  rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
  ceph: use vmf_error() in ceph_filemap_fault()
  libceph: allow setting abort_on_full for rbd

Pull perf tooling updates from Ingo Molnar:
 "Tooling changes only: fixes and a few stray improvements.

  Most of the diffstat is dominated by a PowerPC related fix of system
  call trace output beautification that allows us to (again) use the
  UAPI header version and sync up with the kernel's version of PowerPC
  system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
  header"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  tools headers powerpc: Remove unistd.h
  perf powerpc: Rework syscall table generation
  perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
  tools include uapi: Sync linux/if_link.h copy with the kernel sources
  tools include uapi: Sync linux/vhost.h with the kernel sources
  tools include uapi: Sync linux/fs.h copy with the kernel sources
  perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
  tools include uapi: Grab a copy of linux/mount.h
  perf top: Lift restriction on using callchains without "sym" in --sort
  tools lib traceevent: Remove tep_data_event_from_type() API
  tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
  tools lib traceevent: Changed return logic of tep_register_event_handler() API
  tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
  tools lib traceevent: Rename struct cmdline to struct tep_cmdline
  tools lib traceevent: Initialize host_bigendian at tep_handle allocation
  tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
  perf tests: Add a test for the ARM 32-bit [vectors] page
  perf tools: Make find_vdso_map() more modular
  perf trace: Fix alignment for [continued] lines
  perf trace: Fix ')' placement in "interrupted" syscall lines
  ...

Since commit 09abb5e3 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.

Fixes: fca91f6d ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst
is no longer valid, replaced space with underscore.
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.

Fixes: a5c214da ("KVM/VMX: Change hv flush logic when ept tables are mismatched.")
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.

Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.

This code is serialized by kvm->lock.

Fixes: 1654efcb ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.

Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.

Fix this by adding suffix ULL to integer 0xf.

Addresses-Coverity-ID: 1476095 ("Bad bit shift operation")
Fixes: 6c0f0bba ("KVM: x86: Introduce a function to initialize the PT configuration")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Pull x86 fixes from Ingo Molnar:
 "A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
  to CONFIG_X86_RESCTRL"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
  x86/cache: Rename config option to CONFIG_X86_RESCTRL
  samples/seccomp: Fix 32-bit build

Pull ACPI fixes from Rafael Wysocki:
 "Fix a build failure introduced recently, fix the xpower PMIC ACPI
  driver, clean up the handling of duplicate entries in _PRx power
  resource lists and fix addresses in NUMA-related messages on 32-bit
  with PAE.

  Specifics:

   - Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
     can occur since ACPI can be built without PCI now (Sinan Kaya).

   - Clean up the handling of duplicate entries in power resource lists
     returned by _PRx evaluation to avoid triggering WARN_ON() on
     attempts to add duplicate symlinks in sysfs (Hans de Goede).

   - Fix issues with the TS current-source switching on systems using
     the xpower PMIC by avoiding to update unrelated bits in the TS
     pin-ctrl register and avoiding to unconditionally enable TS
     current-source on systems where it is not used (Hans de Goede).

   - Fix addresses in NUMA-related messages on 32-bit with PAE which can
     be truncated due to integer type conversions (Chao Fan)"

* tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: xpower: Fix TS-pin current-source handling
  ACPI: NUMA: Use correct type for printing addresses on i386-PAE
  ACPI: power: Skip duplicate power resource references in _PRx
  ACPI: Fix build failure when CONFIG_NLS is set to 'n'

Pull power management updates from Rafael Wysocki:
 "These fix fallout after starting to use hrtimers in the runtime PM
  framework, fix a few cpufreq issues, fix a recently broken reference
  to cpuidle documentation, update MAINTAINERS entries for cpufreq and
  cpuidle and make the recently added system suspend and resume support
  in devfreq actually work.

  Specifics:

   - Prevent integer overflows from occurring on 32-bit when converting
     milliseconds to nanoseconds in the runtime PM framework and update
     comments that still refer to jiffies in it (Vincent Guittot,
     Ladislav Michl).

   - Fix the SCMI cpufreq driver to always use the same frequency units
     for arch_set_freq_scale() and make the scale-invariant load
     tracking acutally work with this driver (Quentin Perret).

   - Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
     broken during the 4.20 defelopment cycle (Viresh Kumar).

   - Prevent the cpufreq core from attempting to return the current
     frequency of offline CPUs (Sudeep Holla).

   - Add devfreq suspend and resume hooks (missed previously) to the PM
     core to make the recently added system suspend and resume support
     in devfreq actually work (Lukasz Luba).

   - Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
     references to new/current documentation to them (Rafael Wysocki).

   - Fix a recently broken reference to cpuidle documentation (Otto
     Sabart)"

* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM-runtime: Fix autosuspend_delay on 32bits arch
  PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
  cpufreq: scmi: Fix frequency invariance in slow path
  doc: trace: fix reference to cpuidle documentation file
  cpufreq: check if policy is inactive early in __cpufreq_get()
  cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
  cpuidle / Documentation: Update cpuidle MAINTAINERS entry
  cpufreq / Documentation: Update cpufreq MAINTAINERS entry
  PM: sleep: call devfreq suspend/resume

Pull drm fixes from Dave Airlie:
 "Not a huge amount for rc2, assume the usual quiet period, and rc3 will
  be most of it.

  amdgpu:
   - Powerplay fixes
   - Virtual display pinning fixes
   - Golden register updates for Vega
   - Pitch and gem size validation fixes
   - SR-IOV init error fix
   - Pagetables in system RAM disable for some Raven system
   - DP-MST resume fixes

  tc358767 bridge:
   - fix to work with displayport connector"

* tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits)
  drm/amdgpu: disable system memory page tables for now
  drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang
  drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20
  drm/bridge: tc358767: use DP connector if no panel set
  drm/bridge: tc358767: fix output H/V syncs
  drm/bridge: tc358767: reject modes which require too much BW
  drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
  drm/bridge: tc358767: fix single lane configuration
  drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
  drm/bridge: tc358767: add bus flags
  drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume()
  drm/amdgpu: Don't fail resume process if resuming atomic state fails
  drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()
  drm/amdgpu: validate user GEM object size
  drm/amdgpu: validate user pitch alignment
  drm/amd/powerplay: drop the unnecessary uclk hard min setting
  drm/amd/powerplay: avoid possible buffer overflow
  drm/amd/powerplay: create pp_od_clk_voltage device file under OD support
  drm/amd/powerplay: update OD support flag for SKU with no OD capabilities
  drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG
  ...