- 18 Feb, 2014 40 commits
-
-
Phoebe Buckheister authored
phy_set_csma_params has a redundant (and impossible) check for "retries", found by smatch. The check was supposed to be for frame_retries, but wasn't moved during development when phy_set_frame_retries was introduced. Also, maxBE >= 3 as required by the standard is not enforced. Remove the redundant check, assure max_be >= 3 and check -1 <= frame_retries <= 7 in the correct function. Signed-off-by:
Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
This patch fixes a typo in the Device Tree binding for the leading '#'. Reported-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ying Xue authored
Rename the following functions, which are shorter and more in line with common naming practice in the network subsystem. tipc_bclink_send_msg->tipc_bclink_xmit tipc_bclink_recv_pkt->tipc_bclink_rcv tipc_disc_recv_msg->tipc_disc_rcv tipc_link_send_proto_msg->tipc_link_proto_xmit link_recv_proto_msg->tipc_link_proto_rcv link_send_sections_long->tipc_link_iovec_long_xmit tipc_link_send_sections_fast->tipc_link_iovec_xmit_fast tipc_link_send_sync->tipc_link_sync_xmit tipc_link_recv_sync->tipc_link_sync_rcv tipc_link_send_buf->__tipc_link_xmit tipc_link_send->tipc_link_xmit tipc_link_send_names->tipc_link_names_xmit tipc_named_recv->tipc_named_rcv tipc_link_recv_bundle->tipc_link_bundle_rcv tipc_link_dup_send_queue->tipc_link_dup_queue_xmit link_send_long_buf->tipc_link_frag_xmit tipc_multicast->tipc_port_mcast_xmit tipc_port_recv_mcast->tipc_port_mcast_rcv tipc_port_reject_sections->tipc_port_iovec_reject tipc_port_recv_proto_msg->tipc_port_proto_rcv tipc_connect->tipc_port_connect __tipc_connect->__tipc_port_connect __tipc_disconnect->__tipc_port_disconnect tipc_disconnect->tipc_port_disconnect tipc_shutdown->tipc_port_shutdown tipc_port_recv_msg->tipc_port_rcv tipc_port_recv_sections->tipc_port_iovec_rcv release->tipc_release accept->tipc_accept bind->tipc_bind get_name->tipc_getname poll->tipc_poll send_msg->tipc_sendmsg send_packet->tipc_send_packet send_stream->tipc_send_stream recv_msg->tipc_recvmsg recv_stream->tipc_recv_stream connect->tipc_connect listen->tipc_listen shutdown->tipc_shutdown setsockopt->tipc_setsockopt getsockopt->tipc_getsockopt Above changes have no impact on current users of the functions. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
Add support of the device tree probing for the Renesas SH-Mobile SoCs documenting the device tree binding as necessary. This work is loosely based on the original patch by Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
This patch is an attempt to gather the Ethernet related bindings in one file, like it's done in the MMC and some other subsystems. It should save some of the trouble of documenting several properties over and over in each binding document, instead only making reference to the main file. I have used the Embedded Power Architecture(TM) Platform Requirements (ePAPR) standard as a base for the properties description, also documenting some ad-hoc properties that have been introduced over time despite having direct analogs in ePAPR. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Justin van Wijngaarden authored
checkpatch.pl clean-up, from 14 error/ 277 warnings, to 0 errors, 7 warnings Signed-off-by:
Justin van Wijngaarden <justinvanwijngaarden@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Veaceslav Falico says: ==================== bonding: add an option to rely on unvalidated arp packets v4 -> v5: Again per Nik's advise correct the bond_opts restrictions for arp_validate - set it the same as arp_interval. v3 -> v4: Per Nikolay's advise, remove the new bond_opts restriction on modes setting for arp_validate. v2 -> v3: Per Jay's advise, use the 'filter' keyword instead of 'arp' one, and use his text for documentation. Also, rebase on the latest net-next. Sorry for the delay, didn't manage to send it before net-next was closed. v1 -> v2: Don't remove the 'all traffic' functionality - rather, add new arp_validate options to specify that we want *only* unvalidated arps. Currently, if arp_validate is off (0), slave_last_rx() returns the slave->dev->last_rx, which is always updated on *any* packet received by slave, and not only arps. This means that, if the validation of arps is off, we're treating *any* incoming packet as a proof of slave being up, and not only arps. This might seem logical at the first glance, however it can cause a lot of troubles and false-positives, one example would be: The arp_ip_target is NOT accessible, however someone in the broadcast domain spams with any broadcast traffic. This way bonding will be tricked that the slave is still up (as in - can access arp_ip_target), while it's not. The net_device->last_rx is already used in a lot of drivers (even though the comment states to NOT do it :)), and it's also ugly to modify it from bonding. However, some loadbalance setups might rely on the fact that even non-arp traffic is a sign of slave being up - and we definitely can't break anyones config - so an extension to arp_validate is needed. So, to fix this, add an option for the user to specify if he wants to filter out non-arp traffic on unvalidated slaves, remove the last_rx from bonding, *always* call bond_arp_rcv() in slave's rx_handler (which is bond_handle_frame), and if we spot an arp there with this option on - update the slave->last_arp_rx - and use it instead of net_device->last_rx. Finally, rename last_arp_rx to last_rx to reflect the changes. Also rename slave->jiffies to ->last_link_up, to reflect better its meaning, add the new option's documentation and update the arp_validate one to be a bit more descriptive. ==================== Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
To reflect the new meaning. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Now that all the logic is handled via last_arp_rx, we don't need to use last_rx. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Now that last_arp_rx correctly show the last time we've received an ARP, we can use it safely instead of slave->dev->last_rx. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Now that last_arp_rx really has the last time we've received any (validated or not) ARP, we can use it in slave_last_rx() instead of slave->dev->last_rx. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Now that the options are in place - arp_validate can be set to receive all the traffic or only arp packets to verify if the slave is up, when the slave isn't validated. CC: Rob Landley <rob@landley.net> CC: "David S. Miller" <davem@davemloft.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Currently we can either receive any traffic as a proff of slave being up, or only *validated* arp traffic (i.e. with src/dst ip checked). Add an option to be able to specify if we want to receive non-validated arp traffic only. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Currently we only set bond_arp_rcv() if we're using arp_validate, however this makes us skip updating last_arp_rx if we're not validating incoming ARPs - thus, if arp_validate is off, last_arp_rx will never be updated. Fix this by always setting up recv_probe = bond_arp_rcv, even if we're not using arp_validate. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Currently we're updating the last_arp_rx only when we've validate the packet, however afterwards we use it as 'ANY last packet received', but not only validated ARPs. Fix this by updating it in case of any packet received. It won't break the arp_validation=0 because we, anyway, return the correct slave->dev->last_rx in slave_last_rx(). CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Currently it's disabled because it's sometimes hard, in typical configs, to make it work - because of the nature how the loadbalance modes work - as it's hard to deliver valid arp replies to correct slaves by the switch. However we still can use arp_validation in loadbalance with several other configs, per example with arp_validate == 2 for backup with one broadcast domain, without the switch(es) doing any balancing - this way we'd be (a bit more) sure that the slave is up. So, enable it to let users decide which one works/suits them best. Also correct the mode limitation from BOND_OPT_ARP_VALIDATE. CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Acked-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
We're always called with rcu_read_lock() held (bond_arp_rcv() is only called from bond_handle_frame(), which is rx_handler and always called under rcu from __netif_receive_skb_core() ). The slave active/passive and/or bonding params can change in-flight, however we don't really care about that - we only modify the last time packet was received, which is harmless. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Acked-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hayes Wang says: ==================== r8152: improvement and new features Change some flows or behavior to improve the efficiency or make the code readable. Besides, support WOL and runtime suspend. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Support get_msglevel and set_msglevel. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Set disable_hub_initiated_lpm = 1. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Replace netif_rx with netif_receive_skb to avoid disabling irq frequently for increasing the efficiency. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Disable teredo for RTL8152 by default. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Support runtime suspend for RTL8152 and RTL8153. Move tx_bottom() from tasklet to delayed_work. That avoids to transmit tx packets after calling autosuspend. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Support WOL for RTL8152 and RTL8153. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Add up method for rtl_ops and asign relative functions. Move clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops. Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop(). Replace allocating the memory in probe() with in ndo_open(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
PHY reset is necessary after some hw settings. However, it would cause the linking down, and so does the set_speed function. Combine the PHY reset with set_speed function. That could reduce the frequency of linking down and accessing the PHY register. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Modify the method of enabling the PHY to clear BMCR_PDOWN only. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Replace getting one item from a list with getting the whole list one time. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Except for RTL_VER_01, replace loading the MAC address from PLA_IDR with from PLA_BACKUP. The default MAC address may be modified by the other OS, so the PLA_IDR may be not the default MAC address. The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed, so load MAC address from PLA_IDR for RTL_VER_01. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Modify the following functions. - r8153_u1u2en - r8153_u2p3en - r8153_power_cut_en Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Replace some codes with the following three functions. - rtl_drop_queued_tx - rxdy_gated_en - r8152_power_cut_en Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Move the following functions which is for the further coding. - rtl_clear_bp - r8153_clear_bp - r8153_teredo_off - r8152b_disable_aldps - r8152b_enable_aldps - r8152b_hw_phy_cfg Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== Adds support for Chelsio T5 40G adapter and Misc. fixes This patch series adds support for Chelsio T5 40G adapters and provides miscelleneous fixes for cxgb4 driver. It also adds device ids of two new T5 adapters. We would like to request this patch series to get merged via David Miller's 'net-next' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Also, modify is_eth_imm() to return header length so it doesn't have to be recomputed in calc_tx_flits(). Based on original work by Mike Werner <werner@chelsio.com> Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Remove unused registers for registers list, and add missing ones Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
Query firmware to see whether we're allowed to use T5 ULPTX MEMWRITE DSGL capabilities. Also pass that information to Upper Layer Drivers via the new (struct cxgb4_lld_info).ulptx_memwrite_dsgl boolean. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kumar Sanghvi authored
The LE workaround in firmware is not atomic and fw_ofld_connection_wrs must not interleave. Therefore, when the workaround is enabled, we need to send all ctrlq WRs on a single ctrl queue. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-