Pull first batch of s390 updates from Martin Schwidefsky:
 "The most interesting change is that Martin converted s390 to generic
  hardirqs.  Which means that all current architectures have been
  converted and that CONFIG_GENERIC_HARDIRQS can be removed.  Martin
  prepared a patch for that already (see genirq branch), but the best
  time to merge that is probably at the end of the merge window / begin
  of -rc1.

  Another patch converts s390 to software referenced bits instead of
  relying on the reference bit in the storage key.  Therefore s390
  doesn't use storage keys anymore, except for kvm.

  Besides that we have improvements, cleanups and fixes in PCI, DASD and
  all over the place."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (32 commits)
  s390/pci: use virtual memory for iommu bitmap
  s390/cio: fix unlocked access of global bitmap
  s390/pci: update function handle after resume from hibernate
  s390/pci: try harder to modify a function
  s390/pci: split lpf
  s390/hibernate: add early resume function
  s390/pci: add recover sysfs knob
  s390/pci: use claim_resource
  s390/pci/hotplug: convert to be builtin only
  s390/mm: implement software referenced bits
  s390/dasd: fix statistics for recovered requests
  s390/tx: allow program interruption filtering in user space
  s390/pgtable: fix mprotect for single-threaded KVM guests
  s390/time: return with irqs disabled from psw_idle
  s390/kprobes: add support for compare and branch instructions
  s390/switch_to: fix save_access_regs() / restore_access_regs()
  s390/bitops: fix inline assembly constraints
  s390/dasd: enable raw_track_access reads without direct I/O
  s390/mm: introduce ptep_flush_lazy helper
  s390/time: clock comparator revalidation
  ...

Pull m68k updates from Geert Uytterhoeven:
 "Summary:
   - Kill harmless warning messages when running a multi-platform kernel
     on Atari
   - Correct virt/phys mixups that didn't actually hurt due to identity
     mappings"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/atari: ARAnyM - Always use physical addresses in NatFeat calls
  m68k: Ignore disabled HSYNC interrupt on Atari for irqs_disabled()

Pull hwmon updates from Guenter Roeck:
 - new driver for HTU21D (humidity sensor)
 - add support for Fam16h (Kabini) to k10temp
 - add support for NCT6102D/6106D and NCT6791D to nct6775 driver
 - add support for ADS1115 to ads1015 driver
 - add support for hibernate to w83627ehf and nct6775 drivers
 - some minor cleanups

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (htu21) Add Measurement Specialties HTU21D support
  hwmon: Change my email address.
  hwmon: (k10temp) Add support for Fam16h (Kabini)
  hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0
  hwmon: (ads1015) Add support for ADS1115
  hwmon: (w83627ehf) Add support for hibernate
  hwmon: (nct6775) Add support for hibernate
  hwmon: use dev_get_platdata()
  hwmon: (nct6775) Fix size of data->temp array
  hwmon: (nct6775) Avoid using device platform data outside probe function
  hwmon: (nct6775) Add support for NCT6791D
  hwmon: (nct6775) Add support for beep attributes
  hwmon: (nct6775) Add support for critical low/high temperature limits on NCT6106
  hwmon: (nct6775) Add support for NCT6102D/6106D
  hwmon: (nct6775) Support two SuperIO chips in the same system
  hwmon: (nct6775) Allocate attributes dynamically from templates
  hwmon: (coretemp) Atom CPUs don't support TjMax; no warning needed

The check if the queue is full and adding current to the wait queue of
pending msgsnd() operations (ss_add()) must be atomic.

Otherwise:
 - the thread that performs msgsnd() finds a full queue and decides to
   sleep.
 - the thread that performs msgrcv() first reads all messages from the
   queue and then sleeps, because the queue is empty.
 - the msgrcv() calls do not perform any wakeups, because the msgsnd()
   task has not yet called ss_add().
 - then the msgsnd()-thread first calls ss_add() and then sleeps.

Net result: msgsnd() and msgrcv() both sleep forever.

Observed with msgctl08 from ltp with a preemptible kernel.

Fix: Call ipc_lock_object() before performing the check.

The patch also moves security_msg_queue_msgsnd() under ipc_lock_object:
 - msgctl(IPC_SET) explicitely mentions that it tries to expunge any
   pending operations that are not allowed anymore with the new
   permissions.  If security_msg_queue_msgsnd() is called without locks,
   then there might be races.
 - it makes the patch much simpler.
Reported-and-tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: stable@vger.kernel.org  # for 3.11
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull regulator updates from Mark Brown:
 "Not much exciting going on with the regulator API this time around,
  lots of driver fixes and enhancements - the main thing is the addition
  of a new API to help make the stubbing code do the right thing for
  missing regulator mappings.

  Highlights:

   - A new regulator_get_optional() API call for regulators that can be
     absent in normal operation.  This currently does nothing but will
     be used to improve the stubbing code for unspecified regulators,
     helping avoid some of the issues we've seen with adding new
     regulator support.
   - Helpers for devices with multiple linear ranges of voltages in the
     same regulator.
   - Moved the helpers into a separate file since core.c is getting
     rather large.
   - New drivers for Dialog DA9210 and DA9063, Freescale pfuze100 and
     Marvell 88pm800"

* tag 'regulator-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
  regulator: da9063: Statize da9063_ldo_lim_event
  regulator: lp872x: Make REGULATOR_LP872X depend on I2C rather than I2C=y
  regulator: tps65217: Convert to use linear ranges
  regulator: da9063: Use IS_ERR to check return value of regulator_register()
  regulator: da9063: Optimize da9063_set_current_limit implementation
  regulator: build: Allow most regulators to be built as modules
  regulator: Add devm_regulator_get_exclusive()
  regulator: da9063: Add Dialog DA9063 voltage regulators support.
  regulator: ti-abb: simplify platform_get_resource_byname/devm_ioremap_resource
  hwmon: (sht15) Use devm_regulator_get_optional()
  regulator: core: Use bool for exclusivitity flag
  regulator: 88pm800: forever loop in pm800_regulator_probe()
  cpufreq: cpufreq-cpu0: Use devm_regulator_get_optional()
  regulator: da9210: Remove redundant MODULE_ALIAS
  regulator: 88pm800: Fix checking whether num_regulator is valid
  regulator: s2mps11: Fix setting ramp_delay
  regulator: s2mps11: Fix wrong arguments for regmap_update_bits() call
  regulator: palmas: Update the DT binding doc for smps10 out1 and out2
  regulator: palmas: model SMPS10 as two regulators
  regulator: core: Move list_voltage_{linear,linear_range,table} to helpers.c
  ...

Pull spi updates from Mark Brown:
 "Business as usual for SPI - some new drivers, lots of fixes and
  updates to existing drivers plus some new framework features.  Notable
  changes are:

   - Support for dual and quad data lines, commonly used by flash chips
     to improve performance, from Wang Yuhang.
   - Factored out a common pattern for runtime PM implementation into
     the core saving a bunch of code.
   - A particularly nice set of updates to the ep93xx driver from
     H Hartley Sweeten, modernising it and reducing the code size a lot.
   - New drivers for Blackfin v3, EFM32, Freescale DSPI and TI QSPI"

* tag 'spi-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (133 commits)
  spi/qspi: fix missing unlock on error in ti_qspi_start_transfer_one()
  spi: quad: fix the name of DT property
  spi: core: Fix spi_register_master error handling
  spi: efm32: Fix build error
  spi: altera: Use DIV_ROUND_UP to calculate hw->bytes_per_word
  spi: rspi: Add spi_master_get() call to prevent use after free
  spi: quad: Make DT properties optional
  spi: quad: Fix missing return
  spi: Use dev_get_drvdata at appropriate places
  spi: use dev_get_platdata()
  spi: nuc900: Fix mode_bits setting
  spi: simplify devm_request_mem_region/devm_ioremap
  spi: altera: Simplify altera_spi_txrx implementation for noirq case
  spi: spi-rspi: fix inconsistent spin_lock_irqsave
  spi/qspi: Add compatible string for am4372.
  spi/qspi: Fix device table entry
  spi/sirf: fix the misunderstanding about len of spi_transfer
  spi/qspi: Add dual/quad spi read support
  spi: sirf: fix error return code in spi_sirfsoc_probe()
  spi: bcm2835: Add spi_master_get() call to prevent use after free
  ...

Pull regmap updates from Mark Brown:
 "A quiet release for regmap, some cleanups, fixes and:

   - Improved node coalescing for rbtree, reducing memory usage and
     improving performance during syncs.
   - Support for registering multiple register patches.
   - A quirk for handling interrupts that need to be clear when masked
     in regmap-irq"

* tag 'regmap-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: rbtree: Make cache_present bitmap per node
  regmap: rbtree: Reduce number of nodes, take 2
  regmap: rbtree: Simplify adjacent node look-up
  regmap: debugfs: Fix continued read from registers file
  regcache-rbtree: Fix reg_stride != 1
  regmap: Allow multiple patches to be registered
  regmap: regcache: allow read-only regs to be cached
  regmap: fix regcache_reg_present() for empty cache
  regmap: core: allow a virtual range to cover its own data window
  regmap: irq: document mask/wake_invert flags
  regmap: irq: make flags bool and put them in a bitfield
  regmap: irq: Allow to acknowledge masked interrupts during initialization
  regmap: Provide __acquires/__releases annotations

Merge lockref infrastructure code by me and Waiman Long.

I already merged some of the preparatory patches that didn't actually do
any semantic changes earlier, but this merges the actual _reason_ for
those preparatory patches.

The "lockref" structure is a combination "spinlock and reference count"
that allows optimized reference count accesses.  In particular, it
guarantees that the reference count will be updated AS IF the spinlock
was held, but using atomic accesses that cover both the reference count
and the spinlock words, we can often do the update without actually
having to take the lock.

This allows us to avoid the nastiest cases of spinlock contention on
large machines under heavy pathname lookup loads.  When updating the
dentry reference counts on a large system, we'll still end up with the
cache line bouncing around, but that's much less noticeable than
actually having to spin waiting for the lock.

* lockref:
  lockref: implement lockless reference count updates using cmpxchg()
  lockref: uninline lockref helper functions
  vfs: reimplement d_rcu_to_refcount() using lockref_get_or_lock()
  vfs: use lockref_get_not_zero() for optimistic lockless dget_parent()
  lockref: add 'lockref_get_or_lock() helper

Instead of taking the spinlock, the lockless versions atomically check
that the lock is not taken, and do the reference count update using a
cmpxchg() loop.  This is semantically identical to doing the reference
count update protected by the lock, but avoids the "wait for lock"
contention that you get when accesses to the reference count are
contended.

Note that a "lockref" is absolutely _not_ equivalent to an atomic_t.
Even when the lockref reference counts are updated atomically with
cmpxchg, the fact that they also verify the state of the spinlock means
that the lockless updates can never happen while somebody else holds the
spinlock.

So while "lockref_put_or_lock()" looks a lot like just another name for
"atomic_dec_and_lock()", and both optimize to lockless updates, they are
fundamentally different: the decrement done by atomic_dec_and_lock() is
truly independent of any lock (as long as it doesn't decrement to zero),
so a locked region can still see the count change.

The lockref structure, in contrast, really is a *locked* reference
count.  If you hold the spinlock, the reference count will be stable and
you can modify the reference count without using atomics, because even
the lockless updates will see and respect the state of the lock.

In order to enable the cmpxchg lockless code, the architecture needs to
do three things:

 (1) Make sure that the "arch_spinlock_t" and an "unsigned int" can fit
     in an aligned u64, and have a "cmpxchg()" implementation that works
     on such a u64 data type.

 (2) define a helper function to test for a spinlock being unlocked
     ("arch_spin_value_unlocked()")

 (3) select the "ARCH_USE_CMPXCHG_LOCKREF" config variable in its
     Kconfig file.

This enables it for x86-64 (but not 32-bit, we'd need to make sure
cmpxchg() turns into the proper cmpxchg8b in order to enable it for
32-bit mode).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

They aren't very good to inline, since they already call external
functions (the spinlock code), and we're going to create rather more
complicated versions of them that can do the reference count updates
locklessly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This moves __d_rcu_to_refcount() from <linux/dcache.h> into fs/namei.c
and re-implements it using the lockref infrastructure instead.  It also
adds a lot of comments about what is actually going on, because turning
a dentry that was looked up using RCU into a long-lived reference
counted entry is one of the more subtle parts of the rcu walk.

We also used to be _particularly_ subtle in unlazy_walk() where we
re-validate both the dentry and its parent using the same sequence
count.  We used to do it by nesting the locks and then verifying the
sequence count just once.

That was silly, because nested locking is expensive, but the sequence
count check is not.  So this just re-validates the dentry and the parent
separately, avoiding the nested locking, and making the lockref lookup
possible.
Acked-by: Waiman Long <waiman.long@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A valid parent pointer is always going to have a non-zero reference
count, but if we look up the parent optimistically without locking, we
have to protect against the (very unlikely) race against renaming
changing the parent from under us.

We do that by using lockref_get_not_zero(), and then re-checking the
parent pointer after getting a valid reference.

[ This is a re-implementation of a chunk from the original patch by
  Waiman Long: "dcache: Enable lockless update of dentry's refcount".
  I've completely rewritten the patch-series and split it up, but I'm
  attributing this part to Waiman as it's close enough to his earlier
  patch  - Linus ]
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This behaves like "lockref_get_not_zero()", but instead of doing nothing
if the count was zero, it returns with the lock held.

This allows callers to revalidate the lockref-protected data structure
if required even if the count was zero to begin with, and possibly
increment the count if it passes muster.

In particular, the dentry code wants this when it wants to turn an
RCU-protected dentry into a stable refcounted one: if the dentry count
it zero, but the sequence number still validates the dentry, we can take
a reference to it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fix from James Bottomley:
 "This is a bug fix for the pm80xx driver.  It turns out that when the
  new hardware support was added in 3.10 the IO command size was kept at
  the old hard coded value.  This means that the driver attaches to some
  new cards and then simply hangs the system"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] pm80xx: fix Adaptec 71605H hang

Pull x86 boot fix from Peter Anvin:
 "A single very small boot fix for very large memory systems (> 0.5T)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM

Pull slave-dma fix from Vinod Koul:
 "A fix for resolving TI_EDMA driver's build error in allmodconfig to
  have filter function built in""

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma/Kconfig: TI_EDMA needs to be boolean