- 07 Feb, 2021 2 commits
-
-
Christian Hewitt authored
This patch adapts the panfrost pre-defined thresholds change [0] to the lima driver to improve real-world performance. The upthreshold value has been set to ramp GPU frequency to max freq faster (compared to panfrost) to compensate for the lower overall performance of utgard devices. [0] https://patchwork.kernel.org/project/dri-devel/patch/20210121170445.19761-1-lukasz.luba@arm.com/Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Reviewed-by:
Lukasz Luba <lukasz.luba@arm.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127194047.21462-1-christianshewitt@gmail.com
-
Lukasz Luba authored
Devfreq framework supports 2 modes for monitoring devices. Use delayed timer as default instead of deferrable timer in order to monitor the GPU status regardless of CPU idle. Signed-off-by:
-
- 05 Feb, 2021 11 commits
-
-
Colin Ian King authored
Don't populate the const array m_div_val on the stack but instead make it static. Makes the object code smaller by 29 bytes: Before: text data bss dec hex filename 34736 4552 0 39288 9978 drivers/gpu/drm/mgag200/mgag200_mode.o After: text data bss dec hex filename 34625 4616 0 39241 9949 drivers/gpu/drm/mgag200/mgag200_mode.o (gcc version 10.2.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Christian König authored
Allow multiple schedulers to share the load balancing score. This is useful when one engine has different hw rings. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by:
Leo Liu <leo.liu@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204144405.2737-1-christian.koenig@amd.com
-
Gerd Hoffmann authored
dumb buffers are shadowed anyway, so there is no need to store them in device memory. Use QXL_GEM_DOMAIN_CPU (TTM_PL_SYSTEM) instead. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
-
Gerd Hoffmann authored
Now that we have the new release_event wait queue we can just use that in qxl_fence_wait() and simplify the code a lot. Signed-off-by:
-
Gerd Hoffmann authored
Reorganize qxl_device_fini() a bit. Add missing unpin() calls. Count releases. Add wait queue for releases. That way qxl_device_fini() can easily wait until everything is ready for proper shutdown. Signed-off-by:
-
Gerd Hoffmann authored
qxl_primary_atomic_disable must check whenever the framebuffer bo has a shadow surface and in case it has check the shadow primary status. Signed-off-by:
-
Gerd Hoffmann authored
Suggested-by:
-
Gerd Hoffmann authored
In case we have a shadow surface on shutdown release it so it doesn't leak. Signed-off-by:
-
Gerd Hoffmann authored
Balances the qxl_create_bo(..., pinned=true, ...); call in qxl_release_bo_alloc(). Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
Gerd Hoffmann authored
This reverts commit b91907a6. Patch is broken, it effectively makes qxl_drm_release() a nop because on normal driver shutdown qxl_drm_release() is called *after* drm_dev_unregister(). Fixes: b91907a6 ("drm/qxl: do not run release if qxl failed to init") Cc: Tong Zhang <ztong0001@gmail.com> Signed-off-by:
-
- 04 Feb, 2021 3 commits
-
-
Imre Deak authored
Use the macro defined for the first logical port instead of the corresponding magic number. Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-4-imre.deak@intel.com
-
Imre Deak authored
drm_get_edid() already updates the tile property since commit 2de3a078 ("drm/dp: Set the connector's TILE property even for DP SST connectors") so no need to update it after calling this function. Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Imre Deak authored
Caching EDIDs for physical ports prevents updating the EDID if a port gets reconnected via a Connection Status Notification message, fix this. Fixes: db1a0795 ("drm/dp_mst: Handle SST-only branch device case") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
-
- 03 Feb, 2021 4 commits
-
-
Tong Zhang authored
if qxl_device_init() fail, drm device will not be registered, in this case, do not run qxl_drm_release() [ 5.258534] ================================================================== [ 5.258931] BUG: KASAN: user-memory-access in qxl_destroy_monitors_object+0x42/0xa0 [qxl] [ 5.259388] Write of size 8 at addr 00000000000014dc by task modprobe/95 [ 5.259754] [ 5.259842] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc6-00007-g88bb507a #62 [ 5.260309] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda54 [ 5.260917] Call Trace: [ 5.261056] dump_stack+0x7d/0xa3 [ 5.261245] kasan_report.cold+0x10c/0x10e [ 5.261475] ? qxl_destroy_monitors_object+0x42/0xa0 [qxl] [ 5.261789] check_memory_region+0x17c/0x1e0 [ 5.262029] qxl_destroy_monitors_object+0x42/0xa0 [qxl] [ 5.262332] qxl_modeset_fini+0x9/0x20 [qxl] [ 5.262595] qxl_drm_release+0x22/0x30 [qxl] [ 5.262841] drm_dev_release+0x32/0x50 [ 5.263047] release_nodes+0x39e/0x410 [ 5.263253] ? devres_release+0x40/0x40 [ 5.263462] really_probe+0x2ea/0x420 [ 5.263664] driver_probe_device+0x6d/0xd0 [ 5.263888] device_driver_attach+0x82/0x90 [ 5.264116] ? device_driver_attach+0x90/0x90 [ 5.264353] __driver_attach+0x60/0x100 [ 5.264563] ? device_driver_attach+0x90/0x90 [ 5.264801] bus_for_each_dev+0xe1/0x140 [ 5.265014] ? subsys_dev_iter_exit+0x10/0x10 [ 5.265251] ? klist_node_init+0x61/0x80 [ 5.265464] bus_add_driver+0x254/0x2a0 [ 5.265673] driver_register+0xd3/0x150 [ 5.265882] ? 0xffffffffc0048000 [ 5.266064] do_one_initcall+0x84/0x250 [ 5.266274] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 5.266596] ? unpoison_range+0xf/0x30 [ 5.266801] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 5.267082] ? unpoison_range+0xf/0x30 [ 5.267287] ? unpoison_range+0xf/0x30 [ 5.267491] do_init_module+0xf8/0x350 [ 5.267697] load_module+0x3fe6/0x4340 [ 5.267902] ? vm_unmap_ram+0x1d0/0x1d0 [ 5.268115] ? module_frob_arch_sections+0x20/0x20 [ 5.268375] ? __do_sys_finit_module+0x108/0x170 [ 5.268624] __do_sys_finit_module+0x108/0x170 [ 5.268865] ? __ia32_sys_init_module+0x40/0x40 [ 5.269111] ? file_open_root+0x200/0x200 [ 5.269330] ? do_sys_open+0x85/0xe0 [ 5.269527] ? filp_open+0x50/0x50 [ 5.269714] ? exit_to_user_mode_prepare+0xfc/0x130 [ 5.269978] do_syscall_64+0x33/0x40 [ 5.270176] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 5.270450] RIP: 0033:0x7fa3f685bcf7 [ 5.270646] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d1 [ 5.271634] RSP: 002b:00007ffca83048d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 5.272037] RAX: ffffffffffffffda RBX: 0000000001e94a70 RCX: 00007fa3f685bcf7 [ 5.272416] RDX: 0000000000000000 RSI: 0000000001e939e0 RDI: 0000000000000003 [ 5.272794] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 5.273171] R10: 00007fa3f68bf300 R11: 0000000000000246 R12: 0000000001e939e0 [ 5.273550] R13: 0000000000000000 R14: 0000000001e93bd0 R15: 0000000000000001 [ 5.273928] ================================================================== Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210203040727.868921-1-ztong0001@gmail.comSigned-off-by:
-
Dan Carpenter authored
If devm_request_mem_region() fails this code currently returns success but it should return -EBUSY. Fixes: 6076a971 ("drm/virtio: implement blob resources: probe for host visible region") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/YBpy0GS7GfmafMfe@mwandaSigned-off-by:
-
Daniel Vetter authored
Requested by Thomas. I think it justifies a new level, since I tried to make some forward progress on this last summer, and gave up (for now). This is very tricky. Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210122133624.1751802-1-daniel.vetter@ffwll.ch
-
Ye Bin authored
Fix follow warning: drivers/gpu/drm/nouveau/nouveau_bios.c:2086:18: warning: variable ‘pdev’ set but not used [-Wunused-but-set-variable] struct pci_dev *pdev; ^~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
- 02 Feb, 2021 4 commits
-
-
Zack Rusin authored
Dan noticed some issues with pci_release_region, this builds upon that and fixes some other lingering issues. As part of this we also can stop trying to manually free our managed device; there's no need for it, it will be cleaned up automatically for us. Fixes: 8772c0bb ("drm/vmwgfx: Cleanup pci resource allocation") Signed-off-by:
Zack Rusin <zackr@vmware.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
-
Bernard Zhao authored
remove unneeded variable: "ret". Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com
-
Joseph Schulte authored
This patch helps complete Use DRM_MODESET_LOCK_ALL* helpers instead of boilerplate todo in Documentation/gpu/todo.rst Signed-off-by:
Joseph Schulte <joeschulte.js@gmail.com> Signed-off-by:
-
Christian König authored
Looks like this was not correctly adjusted. Signed-off-by:
-
- 01 Feb, 2021 4 commits
-
-
Thomas Zimmermann authored
The gma500 driver does not use TTM. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Remove the CONFIG_X86 conditionals from the source code. The driver already depends on X86 in the Kconfig file. Also, no one has been trying to build it on a non-x86 platform recently, or they would have noticed that drm_ttm_cache_flush() doesn't exist. Signed-off-by:
-
Thomas Zimmermann authored
With support for the MID-related chips removed, only support for desktop chips is left in the driver. So just build the complete driver if DRM_GMA500 has been selected. Anyone who wants to enable the Poulsbo code would probably also want the Cedarview code. [Patrik: Fixed conflict due to Oaktrail not being dropped] Signed-off-by:
-
Thomas Zimmermann authored
Medfield is an outdated mobile platform with apparently no users left. Remove it from gma500. Signed-off-by:
-
- 03 Feb, 2021 1 commit
-
-
Joe Perches authored
Use semicolons and braces. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
-
- 30 Jan, 2021 1 commit
-
-
Qinglang Miao authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in a reference leak here. A new function pm_runtime_resume_and_get is introduced in [0] to keep usage counter balanced. So We fix the reference leak by replacing it with new function. [0] commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Fixes: 50de2e9e ("drm/lima: enable runtime pm") Reported-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
- 29 Jan, 2021 1 commit
-
-
Luben Tuikov authored
This patch does not change current behaviour. The driver's job timeout handler now returns status indicating back to the DRM layer whether the device (GPU) is no longer available, such as after it's been unplugged, or whether all is normal, i.e. current behaviour. All drivers which make use of the drm_sched_backend_ops' .timedout_job() callback have been accordingly renamed and return the would've-been default value of DRM_GPU_SCHED_STAT_NOMINAL to restart the task's timeout timer--this is the old behaviour, and is preserved by this patch. v2: Use enum as the status of a driver's job timeout callback method. v3: Return scheduler/device information, rather than task information. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Eric Anholt <eric@anholt.net> Reported-by:Luben Tuikov <luben.tuikov@amd.com> Acked-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Acked-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
- 28 Jan, 2021 9 commits
-
-
Dan Carpenter authored
The devm_memremap() function never returns NULL, it returns error pointers so the test needs to be fixed. Also we need to call pci_release_regions() to avoid a memory leak. Fixes: be4f77ac ("drm/vmwgfx: Cleanup fifo mmio handling") Signed-off-by:
-
Maxime Ripard authored
The CEC and hotplug interrupts were missing when that binding was introduced, let's add them in now that we've figured out how it works. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by:
-
Maxime Ripard authored
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10, but this was lacking any of the interrupts of the CEC controller so we have to deal with the backward compatibility. Do so by simply ignoring the CEC setup if the DT doesn't have the interrupts property. Reviewed-by:
-
Dom Cobley authored
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by:
Dom Cobley <popcornmix@gmail.com> Signed-off-by:
-
Maxime Ripard authored
The HDMI controller found in the BCM2711 has an external interrupt controller for the CEC and hotplug interrupt shared between the two instances. Let's add a variant flag to register a single interrupt handler and deals with the interrupt handler setup, or two interrupt handlers relying on an external irqchip. Signed-off-by:
-
Maxime Ripard authored
The BCM2711 has two different interrupt sources to transmit and receive CEC messages, provided through an external interrupt chip shared between the two HDMI interrupt controllers. The rest of the CEC controller is identical though so we need to change a bit the code organisation to share the code as much as possible, yet still allowing to register independent handlers. Signed-off-by:
-
Maxime Ripard authored
While the BCM2835 had the CEC clock derived from the HSM clock, the BCM2711 has a dedicated parent clock for it. Let's introduce a separate clock for it so that we can handle both cases. Reviewed-by:
-
Maxime Ripard authored
As part of the enable sequence we might change the HSM clock rate if the pixel rate is different than the one we were already dealing with. On the BCM2835 however, the CEC clock derives from the HSM clock so any rate change will need to be reflected in the CEC clock divider to output 40kHz. Fixes: cd4cb49d ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by:
-
Maxime Ripard authored
The CEC clock divider needs to output a frequency of 40kHz from the HSM rate on the BCM2835. The driver used to have a fixed frequency for it, but that changed for the BCM2711 and we now need to compute it dynamically to maintain the proper rate. Fixes: cd4cb49d ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by:
-
