- 05 May, 2017 6 commits
-
-
Monk Liu authored
otherwise we'll lost the high 32 bit for pte, which lead to incorrect MTYPE for vega10. Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
this value is used by avfs to adjust inversion voltage. Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
-
Rex Zhu authored
This is a valid configuration. Signed-off-by:
-
Rex Zhu authored
SMU not support FanTargetTemperature in pptable, so send msg instand. Signed-off-by:
-
Rex Zhu authored
Send the VBIOS bootup VDDC as a SOC floor voltage to SMU before populating the PPTABLE. After DPM is enabled, This floor voltage will be removed. This will prevent SMC from going to Vmin upon receiving PPTable causing a violation. Signed-off-by:
-
Rex Zhu authored
1. return error code instand of -1. 2. print msg info if send msg failed Signed-off-by:
-
- 02 May, 2017 5 commits
-
-
Shaoyun Liu authored
Firmware used reg set 2 for tlb invalidation. AMDGPU can start from reg set 3 to avoid the conflict. AMDKFD will use the reg set 0 or 1 when necesary. Signed-off-by:
Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewws-by:
-
Alex Deucher authored
Need to properly set the ROQ space setting. Reviewed-by:
-
Alex Deucher authored
Using the wrong macro for soc15 register access. Reviewed-by:
-
Alex Deucher authored
Rather than using a hardcoded value. Reviewed-by:
-
Alex Deucher authored
Add new RIDs. Acked-by:
Alex Xie <AlexBin.Xie@amd.com> Signed-off-by:
-
- 01 May, 2017 1 commit
-
-
Michel Dänzer authored
This reverts commit cb341a31. The purpose of the refactor was for amdgpu_crtc_prepare/submit_flip to be used by the DC code, but that's no longer the case. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
- 28 Apr, 2017 28 commits
-
-
Michel Dänzer authored
Some of these paths probably cannot be interrupted by a signal anyway. Those that can would fail to clean up things if they actually got interrupted. Reviewed-by:
-
Rex Zhu authored
Add functions to disable dpm for S3/S4. Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Rex Zhu authored
Disable ctf in eventmgr to fix S3/S4 support. Signed-off-by:
-
Rex Zhu authored
export disablesmcctf to eventmgr. need to disable temperature alert when s3/s4. otherwise, when resume back,enable temperature alert will fail. Signed-off-by:
-
Chunming Zhou authored
the case could happen when gpu reset: 1. when gpu reset, cs can be continue until sw queue is full, then push job will wait with holding pd reservation. 2. gpu_reset routine will also need pd reservation to restore page table from their shadow. 3. cs is waiting for gpu_reset complete, but gpu reset is waiting for cs releases reservation. v2: handle amdgpu_cs_submit error path. Signed-off-by:
Chunming Zhou <David1.Zhou@amd.com> Reviewed-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
-
Junwei Zhang authored
Signed-off-by:
-
Junwei Zhang authored
v2: 64-bit aligned for gpu info v3: squash in wave_front_fix Signed-off-by:
Ken Wang <Qingqing.Wang@amd.com> Signed-off-by:
Qiang Yu <Qiang.Yu@amd.com> Signed-off-by:
-
Christian König authored
Those functions are all unused and some not even implemented. v2: keep cgs_get_pci_resource, it is used by the ACP driver. Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Rex Zhu authored
run gpu test auto reboot when enable cks right now. Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Alex Xie authored
There is no good mechanism to handle the corresponding error. When signal interrupt happens, unpin is not called. As a result, inside AMDGPU, the statistic of pin size will be wrong. Signed-off-by:
-
Alex Xie authored
Either in cgs functions or for callers of cgs functions: 1. The signal interrupt can affect the expected behaviour 2. There is no good mechanism to handle the corresponding error 3. There is no chance of deadlock in these single BO waiting 4. There is no clear benefit for interruptible waiting 5. Future caller of these functions might have same issue. Signed-off-by:
-
Chunming Zhou authored
[ 141.420491] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 141.420532] IP: [<ffffffff81579ee1>] fence_remove_callback+0x11/0x60 [ 141.420563] PGD 20a030067 [ 141.420575] PUD 2088ca067 [ 141.420587] PMD 0 [ 141.420599] Oops: 0000 [#1] SMP [ 141.420612] Modules linked in: amdgpu(OE) ttm(OE) drm_kms_helper(E) drm(E) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) eeepc_wmi(E) asus_wmi(E) sparse_keymap(E) snd_hda_codec_realtek(E) video(E) snd_hda_codec_generic(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) joydev(E) snd_hda_codec(E) snd_seq_midi(E) snd_seq_midi_event(E) snd_hda_core(E) snd_hwdep(E) snd_rawmidi(E) snd_pcm(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) snd_seq(E) crc32_pclmul(E) ghash_clmulni_intel(E) snd_seq_device(E) snd_timer(E) aesni_intel(E) aes_x86_64(E) lrw(E) gf128mul(E) glue_helper(E) ablk_helper(E) cryptd(E) snd(E) soundcore(E) serio_raw(E) shpchp(E) i2c_piix4(E) i2c_designware_platform(E) 8250_dw(E) i2c_designware_core(E) mac_hid(E) binfmt_misc(E) [ 141.420948] nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) parport_pc(E) ppdev(E) lp(E) parport(E) autofs4(E) hid_generic(E) usbhid(E) hid(E) psmouse(E) r8169(E) ahci(E) mii(E) libahci(E) wmi(E) [ 141.421042] CPU: 14 PID: 223 Comm: kworker/14:2 Tainted: G OE 4.9.0-custom #4 [ 141.421074] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 0606 04/06/2017 [ 141.421146] Workqueue: events amd_sched_job_timedout [amdgpu] [ 141.421169] task: ffff88020b03ba80 task.stack: ffffc900016f4000 [ 141.421193] RIP: 0010:[<ffffffff81579ee1>] [<ffffffff81579ee1>] fence_remove_callback+0x11/0x60 [ 141.421229] RSP: 0018:ffffc900016f7d30 EFLAGS: 00010202 [ 141.421250] RAX: ffff8801c049fc00 RBX: ffff8801d4d8dc00 RCX: 0000000000000000 [ 141.421278] RDX: 0000000000000001 RSI: ffff8801c049fcc0 RDI: 0000000000000000 [ 141.421307] RBP: ffffc900016f7d48 R08: 0000000000000000 R09: 0000000000000000 [ 141.421334] R10: 00000020ed512a30 R11: 0000000000000001 R12: 0000000000000000 [ 141.421362] R13: ffff880209ba4ba0 R14: ffff880209ba4c58 R15: ffff8801c055cc60 [ 141.421390] FS: 0000000000000000(0000) GS:ffff88021ef80000(0000) knlGS:0000000000000000 [ 141.421421] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.421443] CR2: 0000000000000030 CR3: 000000020b554000 CR4: 00000000003406e0 [ 141.421471] Stack: [ 141.421480] ffff8801d4d8dc00 ffff880209ba4c48 ffff880209ba4ba0 ffffc900016f7d78 [ 141.421513] ffffffffa0697920 ffff880209ba0000 0000000000000000 ffff880209ba2770 [ 141.421549] ffff880209ba4b08 ffffc900016f7df0 ffffffffa05ce2ae ffffffffa0509eb7 [ 141.421583] Call Trace: [ 141.421628] [<ffffffffa0697920>] amd_sched_hw_job_reset+0x50/0xb0 [amdgpu] [ 141.421676] [<ffffffffa05ce2ae>] amdgpu_gpu_reset+0x8e/0x690 [amdgpu] [ 141.421712] [<ffffffffa0509eb7>] ? drm_printk+0x97/0xa0 [drm] [ 141.421770] [<ffffffffa0698156>] amdgpu_job_timedout+0x46/0x50 [amdgpu] [ 141.421829] [<ffffffffa0696a07>] amd_sched_job_timedout+0x17/0x20 [amdgpu] [ 141.421859] [<ffffffff81095493>] process_one_work+0x153/0x3f0 [ 141.421884] [<ffffffff81095c5b>] worker_thread+0x12b/0x4b0 [ 141.421907] [<ffffffff81095b30>] ? rescuer_thread+0x350/0x350 [ 141.421931] [<ffffffff8109b423>] kthread+0xd3/0xf0 [ 141.421951] [<ffffffff8109b350>] ? kthread_park+0x60/0x60 [ 141.421975] [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30 [ 141.421996] Code: ac 81 e8 a3 1f b0 ff 48 c7 c0 ea ff ff ff e9 48 ff ff ff 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc 53 <48> 8b 7f 30 48 89 f3 e8 73 7c 26 00 48 8b 13 48 39 d3 41 0f 95 [ 141.422156] RIP [<ffffffff81579ee1>] fence_remove_callback+0x11/0x60 [ 141.422183] RSP <ffffc900016f7d30> [ 141.422197] CR2: 0000000000000030 [ 141.433483] ---[ end trace bc0949bf7ddd6d4b ]--- if the job is reset twice, then the parent could be NULL. Signed-off-by:
-
Roger.He authored
Reviewed-by:
Roger.He <Hongbo.He@amd.com> Signed-off-by:
-
Alex Xie authored
1. The signal interrupt can affect the expected behaviour. 2. There is no good mechanism to handle the corresponding error. When signal interrupt happens, unpin is not called. As a result, inside AMDGPU, the statistic of pin size will be wrong. Signed-off-by:
-
Alex Xie authored
Signed-off-by:
-
Alex Xie authored
1. The signal interrupt can affect the expected behaviour. 2. There is no good mechanism to handle the corresponding error. Signed-off-by:
-
Alex Xie authored
1. The signal interrupt can affect the expected behaviour. 2. There is no good mechanism to handle the corresponding error. Signed-off-by:
-
Alex Xie authored
1. The signal interrupt can affect the expected behaviour. 2. There is no mechanism to handle the corresponding error. Signed-off-by:
-
Alex Xie authored
If amdgpu_bo_reserve function is interrupted by signal, amdgpu_bo_kunmap function is not called. Signed-off-by:
-
Mario Kleiner authored
Avoid big roundoff errors in scanline/hactive durations for high pixel clocks, especially for >= 500 Mhz, and thereby program more accurate display fifo watermarks. This is a port of the corresponding amdgpu patch. Implemented for DCE 4,6,8. Tested on Evergreen/DCE-4 with Radeon HD-5770. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mario Kleiner authored
At dot clocks > approx. 250 Mhz, some of these calcs will overflow and cause miscalculation of latency watermarks, and for some overflows also divide-by-zero driver crash. Make calcs more overflow resistant. This is a direct port of the corresponding patch from amdgpu-kms, copy-paste for cik from dce-8 and si from dce-6, with a slightly simpler variant for evergreen dce-4/5. Only tested on DCE-4 evergreen with a Radeon HD-5770. Signed-off-by:
-
Mario Kleiner authored
This apparently got lost when implementing the new DCE-6 support and would cause failures in pageflip scheduling and timestamping. Signed-off-by:
-
Pan Bian authored
Function radeon_fence_emit() returns -ENOMEM if there is no enough memory. And in this case, function radeon_ring_unlock_undo() rather than function radeon_ring_unlock_commit() should be called. However, in function radeon_test_create_and_emit_fence(), the return value of radeon_fence_emit() is ignored. This patch adds the check. Reviewed-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Pan Bian authored
Function radeon_ring_lock() returns an errno on failure, and its return value should be validated. However, in functions r420_cp_errata_init() and r420_cp_errata_fini(), its return value is not checked. This patch adds the checks. Reviewed-by:
-
Frank Min authored
Enable UVD block for SRIOV. Signed-off-by:
Frank Min <Frank.Min@amd.com> Signed-off-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by:
-
Frank Min authored
Add UVD hw init. Signed-off-by:
-
