1. 06 May, 2016 5 commits
    • David Ahern's avatar
      net: ipv6: tcp reset, icmp need to consider L3 domain · 1d2f7b2d
      David Ahern authored
      Responses for packets to unused ports are getting lost with L3 domains.
      
      IPv4 has ip_send_unicast_reply for sending TCP responses which accounts
      for L3 domains; update the IPv6 counterpart tcp_v6_send_response.
      For icmp the L3 master check needs to be moved up in icmp6_send
      to properly respond to UDP packets to a port with no listener.
      
      Fixes: ca254490 ("net: Add VRF support to IPv6 stack")
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d2f7b2d
    • Linus Lüssing's avatar
      bridge: fix igmp / mld query parsing · 856ce5d0
      Linus Lüssing authored
      With the newly introduced helper functions the skb pulling is hidden
      in the checksumming function - and undone before returning to the
      caller.
      
      The IGMP and MLD query parsing functions in the bridge still
      assumed that the skb is pointing to the beginning of the IGMP/MLD
      message while it is now kept at the beginning of the IPv4/6 header.
      
      If there is a querier somewhere else, then this either causes
      the multicast snooping to stay disabled even though it could be
      enabled. Or, if we have the querier enabled too, then this can
      create unnecessary IGMP / MLD query messages on the link.
      
      Fixing this by taking the offset between IP and IGMP/MLD header into
      account, too.
      
      Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code")
      Reported-by: default avatarSimon Wunderlich <sw@simonwunderlich.de>
      Signed-off-by: default avatarLinus Lüssing <linus.luessing@c0d3.blue>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      856ce5d0
    • Nikolay Aleksandrov's avatar
      net: bridge: fix old ioctl unlocked net device walk · 31ca0458
      Nikolay Aleksandrov authored
      get_bridge_ifindices() is used from the old "deviceless" bridge ioctl
      calls which aren't called with rtnl held. The comment above says that it is
      called with rtnl but that is not really the case.
      Here's a sample output from a test ASSERT_RTNL() which I put in
      get_bridge_ifindices and executed "brctl show":
      [  957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30)
      [  957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G        W  O
      4.6.0-rc4+ #157
      [  957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
      BIOS 1.8.1-20150318_183358- 04/01/2014
      [  957.423009]  0000000000000000 ffff880058adfdf0 ffffffff8138dec5
      0000000000000400
      [  957.423009]  ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32
      0000000000000001
      [  957.423009]  00007ffec1a444b0 0000000000000400 ffff880053c19130
      0000000000008940
      [  957.423009] Call Trace:
      [  957.423009]  [<ffffffff8138dec5>] dump_stack+0x85/0xc0
      [  957.423009]  [<ffffffffa05ead32>]
      br_ioctl_deviceless_stub+0x212/0x2e0 [bridge]
      [  957.423009]  [<ffffffff81515beb>] sock_ioctl+0x22b/0x290
      [  957.423009]  [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700
      [  957.423009]  [<ffffffff8126c159>] SyS_ioctl+0x79/0x90
      [  957.423009]  [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1
      
      Since it only reads bridge ifindices, we can use rcu to safely walk the net
      device list. Also remove the wrong rtnl comment above.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      31ca0458
    • Ian Campbell's avatar
      VSOCK: do not disconnect socket when peer has shutdown SEND only · dedc58e0
      Ian Campbell authored
      The peer may be expecting a reply having sent a request and then done a
      shutdown(SHUT_WR), so tearing down the whole socket at this point seems
      wrong and breaks for me with a client which does a SHUT_WR.
      
      Looking at other socket family's stream_recvmsg callbacks doing a shutdown
      here does not seem to be the norm and removing it does not seem to have
      had any adverse effects that I can see.
      
      I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact
      on the vmci transport.
      Signed-off-by: default avatarIan Campbell <ian.campbell@docker.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Stefan Hajnoczi <stefanha@redhat.com>
      Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
      Cc: Andy King <acking@vmware.com>
      Cc: Dmitry Torokhov <dtor@vmware.com>
      Cc: Jorgen Hansen <jhansen@vmware.com>
      Cc: Adit Ranadive <aditr@vmware.com>
      Cc: netdev@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dedc58e0
    • Daniel Jurgens's avatar
      net/mlx4_en: Fix endianness bug in IPV6 csum calculation · 82d69203
      Daniel Jurgens authored
      Use htons instead of unconditionally byte swapping nexthdr.  On a little
      endian systems shifting the byte is correct behavior, but it results in
      incorrect csums on big endian architectures.
      
      Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE')
      Signed-off-by: default avatarDaniel Jurgens <danielj@mellanox.com>
      Reviewed-by: default avatarCarol Soto <clsoto@us.ibm.com>
      Tested-by: default avatarCarol Soto <clsoto@us.ibm.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      82d69203
  2. 04 May, 2016 8 commits
  3. 03 May, 2016 24 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 7391daf2
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Some straggler bug fixes:
      
         1) Batman-adv DAT must consider VLAN IDs when choosing candidate
            nodes, from Antonio Quartulli.
      
         2) Fix botched reference counting of vlan objects and neigh nodes in
            batman-adv, from Sven Eckelmann.
      
         3) netem can crash when it sees GSO packets, the fix is to segment
            then upon ->enqueue.  Fix from Neil Horman with help from Eric
            Dumazet.
      
         4) Fix VXLAN dependencies in mlx5 driver Kconfig, from Matthew
            Finlay.
      
         5) Handle VXLAN ops outside of rcu lock, via a workqueue, in mlx5,
            since it can sleep.  Fix also from Matthew Finlay.
      
         6) Check mdiobus_scan() return values properly in pxa168_eth and macb
            drivers.  From Sergei Shtylyov.
      
         7) If the netdevice doesn't support checksumming, disable
            segmentation.  From Alexandery Duyck.
      
         8) Fix races between RDS tcp accept and sending, from Sowmini
            Varadhan.
      
         9) In macb driver, probe MDIO bus before we register the netdev,
            otherwise we can try to open the device before it is really ready
            for that.  Fix from Florian Fainelli.
      
        10) Netlink attribute size for ILA "tunnels" not calculated properly,
            fix from Nicolas Dichtel"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        ipv6/ila: fix nlsize calculation for lwtunnel
        net: macb: Probe MDIO bus before registering netdev
        RDS: TCP: Synchronize accept() and connect() paths on t_conn_lock.
        RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock
        vxlan: Add checksum check to the features check function
        net: Disable segmentation if checksumming is not supported
        net: mvneta: Remove superfluous SMP function call
        macb: fix mdiobus_scan() error check
        pxa168_eth: fix mdiobus_scan() error check
        net/mlx5e: Use workqueue for vxlan ops
        net/mlx5e: Implement a mlx5e workqueue
        net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue
        net/mlx5: Unmap only the relevant IO memory mapping
        netem: Segment GSO packets on enqueue
        batman-adv: Fix reference counting of hardif_neigh_node object for neigh_node
        batman-adv: Fix reference counting of vlan object for tt_local_entry
        batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP event
        batman-adv: fix DAT candidate selection (must use vid)
      7391daf2
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse · 610603a5
      Linus Torvalds authored
      Pull fuse fixes from Miklos Szeredi:
       "Fix a regression and update the MAINTAINERS entry for fuse"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
        fuse: update mailing list in MAINTAINERS
        fuse: Fix return value from fuse_get_user_pages()
      610603a5
    • Nicolas Dichtel's avatar
      ipv6/ila: fix nlsize calculation for lwtunnel · 79e8dc8b
      Nicolas Dichtel authored
      The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR.
      
      Fixes: 65d7ab8d ("net: Identifier Locator Addressing module")
      CC: Tom Herbert <tom@herbertland.com>
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      79e8dc8b
    • Florian Fainelli's avatar
      net: macb: Probe MDIO bus before registering netdev · cf669660
      Florian Fainelli authored
      The current sequence makes us register for a network device prior to
      registering and probing the MDIO bus which could lead to some unwanted
      consequences, like a thread of execution calling into ndo_open before
      register_netdev() returns, while the MDIO bus is not ready yet.
      
      Rework the sequence to register for the MDIO bus, and therefore attach
      to a PHY prior to calling register_netdev(), which implies reworking the
      error path a bit.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf669660
    • David S. Miller's avatar
      Merge branch 'rds-fixes' · b365d955
      David S. Miller authored
      Sowmini Varadhan says:
      
      ====================
      RDS: TCP: sychronization during connection startup
      
      This patch series ensures that the passive (accept) side of the
      TCP connection used for RDS-TCP is correctly synchronized with
      any concurrent active (connect) attempts for a given pair of peers.
      
      Patch 1 in the series makes sure that the t_sock in struct
      rds_tcp_connection is only reset after any threads in rds_tcp_xmit
      have completed (otherwise a null-ptr deref may be encountered).
      Patch 2 synchronizes rds_tcp_accept_one() with the rds_tcp*connect()
      path.
      
      v2: review comments from Santosh Shilimkar, other spelling corrections
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b365d955
    • Sowmini Varadhan's avatar
      RDS: TCP: Synchronize accept() and connect() paths on t_conn_lock. · bd7c5f98
      Sowmini Varadhan authored
      An arbitration scheme for duelling SYNs is implemented as part of
      commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an
      outgoing socket in rds_tcp_accept_one()") which ensures that both nodes
      involved will arrive at the same arbitration decision. However, this
      needs to be synchronized with an outgoing SYN to be generated by
      rds_tcp_conn_connect(). This commit achieves the synchronization
      through the t_conn_lock mutex in struct rds_tcp_connection.
      
      The rds_conn_state is checked in rds_tcp_conn_connect() after acquiring
      the t_conn_lock mutex.  A SYN is sent out only if the RDS connection is
      not already UP (an UP would indicate that rds_tcp_accept_one() has
      completed 3WH, so no SYN needs to be generated).
      
      Similarly, the rds_conn_state is checked in rds_tcp_accept_one() after
      acquiring the t_conn_lock mutex. The only acceptable states (to
      allow continuation of the arbitration logic) are UP (i.e., outgoing SYN
      was SYN-ACKed by peer after it sent us the SYN) or CONNECTING (we sent
      outgoing SYN before we saw incoming SYN).
      Signed-off-by: default avatarSowmini Varadhan <sowmini.varadhan@oracle.com>
      Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd7c5f98
    • Sowmini Varadhan's avatar
      RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock · eb192840
      Sowmini Varadhan authored
      There is a race condition between rds_send_xmit -> rds_tcp_xmit
      and the code that deals with resolution of duelling syns added
      by commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an
      outgoing socket in rds_tcp_accept_one()").
      
      Specifically, we may end up derefencing a null pointer in rds_send_xmit
      if we have the interleaving sequence:
                 rds_tcp_accept_one                  rds_send_xmit
      
                                                   conn is RDS_CONN_UP, so
          					 invoke rds_tcp_xmit
      
                                                   tc = conn->c_transport_data
              rds_tcp_restore_callbacks
                  /* reset t_sock */
          					 null ptr deref from tc->t_sock
      
      The race condition can be avoided without adding the overhead of
      additional locking in the xmit path: have rds_tcp_accept_one wait
      for rds_tcp_xmit threads to complete before resetting callbacks.
      The synchronization can be done in the same manner as rds_conn_shutdown().
      First set the rds_conn_state to something other than RDS_CONN_UP
      (so that new threads cannot get into rds_tcp_xmit()), then wait for
      RDS_IN_XMIT to be cleared in the conn->c_flags indicating that any
      threads in rds_tcp_xmit are done.
      
      Fixes: 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an
      outgoing socket in rds_tcp_accept_one()")
      Signed-off-by: default avatarSowmini Varadhan <sowmini.varadhan@oracle.com>
      Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb192840
    • David S. Miller's avatar
      Merge branch 'tunnel-csum-and-sg-offloads' · 42c8819b
      David S. Miller authored
      Alexander Duyck says:
      
      ====================
      Fixes for tunnel checksum and segmentation offloads
      
      This patch series is a subset of patches I had submitted for net-next.  I
      plan to drop these two patches from the v3 of "Fix Tunnel features and
      enable GSO partial for several drivers" and I am instead submitting them
      for net since these are truly fixes and likely will need to be backported
      to stable branches.
      
      This series addresses 2 specific issues.  The first is that we could
      request TSO on a v4 inner header while not supporting checksum offload of
      the outer IPv6 header.  The second is that we could request an IPv6 inner
      checksum offload without validating that we could actually support an inner
      IPv6 checksum offload.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42c8819b
    • Alexander Duyck's avatar
      vxlan: Add checksum check to the features check function · af67eb9e
      Alexander Duyck authored
      We need to perform an additional check on the inner headers to determine if
      we can offload the checksum for them.  Previously this check didn't occur
      so we would generate an invalid frame in the case of an IPv6 header
      encapsulated inside of an IPv4 tunnel.  To fix this I added a secondary
      check to vxlan_features_check so that we can verify that we can offload the
      inner checksum.
      Signed-off-by: default avatarAlexander Duyck <aduyck@mirantis.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af67eb9e
    • Alexander Duyck's avatar
      net: Disable segmentation if checksumming is not supported · 996e8021
      Alexander Duyck authored
      In the case of the mlx4 and mlx5 driver they do not support IPv6 checksum
      offload for tunnels.  With this being the case we should disable GSO in
      addition to the checksum offload features when we find that a device cannot
      perform a checksum on a given packet type.
      Signed-off-by: default avatarAlexander Duyck <aduyck@mirantis.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      996e8021
    • Anna-Maria Gleixner's avatar
      net: mvneta: Remove superfluous SMP function call · 0e28bf93
      Anna-Maria Gleixner authored
      Since commit 3b9d6da6 ("cpu/hotplug: Fix rollback during error-out
      in __cpu_disable()") it is ensured that callbacks of CPU_ONLINE and
      CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP
      function calls are no longer required.
      
      Replace smp_call_function_single() with a direct call to
      mvneta_percpu_enable() or mvneta_percpu_disable(). The functions do
      not require to be called with interrupts disabled, therefore the
      smp_call_function_single() calling convention is not preserved.
      
      Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
      Cc: netdev@vger.kernel.org
      Signed-off-by: default avatarAnna-Maria Gleixner <anna-maria@linutronix.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e28bf93
    • Sergei Shtylyov's avatar
      macb: fix mdiobus_scan() error check · ce24c2b8
      Sergei Shtylyov authored
      Now mdiobus_scan() returns ERR_PTR(-ENODEV) instead of NULL if the PHY
      device ID was read as all ones. As this was not  an error before, this
      value  should be filtered out now in this driver.
      
      Fixes: b74766a0 ("phylib: don't return NULL from get_phy_device()")
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ce24c2b8
    • Sergei Shtylyov's avatar
      pxa168_eth: fix mdiobus_scan() error check · 6dd74542
      Sergei Shtylyov authored
      Since mdiobus_scan() returns either an error code or NULL on error, the
      driver should check  for both,  not only for NULL, otherwise a crash is
      imminent...
      Reported-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6dd74542
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 1248ded6
      Linus Torvalds authored
      Pull HID fixes from Jiri Kosina:
       "Fixes for the HID subsystem:
      
         - regression fix for Wacom driver; commit introduced in 4.6-rc1
           mistakenly removed line that should be kept.  Fix by Ping Cheng
      
         - two device-specific quirks, by Ping Cheng and Nazar Mokrynskyi"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: wacom: add missed stylus_in_proximity line back
        HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirk
        HID: wacom: Add support for DTK-1651
      1248ded6
    • Linus Torvalds's avatar
      Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux · 1f6211a4
      Linus Torvalds authored
      Pull clk fix from Stephen Boyd:
       "One small bug fix for the imx6qp CAN clk definition that was causing
        failures and division by zeros in the kernel on those devices"
      
      * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
        clk: imx6q: fix typo in CAN clock definition
      1f6211a4
    • David S. Miller's avatar
      Merge branch 'mlx5-fixes' · 3df8f4c6
      David S. Miller authored
      Saeed Mahameed says:
      
      ====================
      Mellanox 100G mlx5 fixes for 4.6-rc
      
      This small series provides some bug fixes for mlx5 driver.
      
      A small bug fix for iounmap of a null pointer, which dumps a warning on some archs.
      
      One patch to fix the VXLAN/MLX5_EN dependency issue reported by Arnd.
      
      Two patches to fix the scheduling while atomic issue for ndo_add/del_vxlan_port
      NDOs.  The first will add an internal mlx5e workqueue and the second will
      delegate vxlan ports add/del requests to that workqueue.
      
      Note: ('net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue') is only needed for net
      and not net-next as the issue was globally fixed for all device drivers by:
      b7aade15 ('vxlan: break dependency with netdev drivers') in net-next.
      
      Applied on top: f27337e1 ('ip_tunnel: fix preempt warning in ip tunnel creation/updating')
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3df8f4c6
    • Matthew Finlay's avatar
      net/mlx5e: Use workqueue for vxlan ops · d8cf2dda
      Matthew Finlay authored
      The vxlan add/delete port NDOs are called under rcu lock.
      The current mlx5e implementation can potentially block in these
      calls, which is not allowed.  Move to using the mlx5e workqueue
      to handle these NDOs.
      
      Fixes: b3f63c3d ('net/mlx5e: Add netdev support for VXLAN tunneling')
      Signed-off-by: default avatarMatthew Finlay <matt@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d8cf2dda
    • Matthew Finlay's avatar
      net/mlx5e: Implement a mlx5e workqueue · 7bb29755
      Matthew Finlay authored
      Implement a mlx5e workqueue to handle all mlx5e specific tasks.  Move
      all tasks currently using the system workqueue to the new workqueue.
      This is in preparation for vxlan using the mlx5e workqueue in order to
      schedule port add/remove operations.
      Signed-off-by: default avatarMatthew Finlay <matt@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7bb29755
    • Matthew Finlay's avatar
      net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue · 69976fb1
      Matthew Finlay authored
      When MLX5_EN=y MLX5_CORE=y and VXLAN=m there is a linker error for
      vxlan_get_rx_port() due to the fact that VXLAN is a module. Change Kconfig
      to select VXLAN when MLX5_CORE=y. When MLX5_CORE=m there is no dependency
      on the value of VXLAN.
      
      Fixes: b3f63c3d ('net/mlx5e: Add netdev support for VXLAN tunneling')
      Signed-off-by: default avatarMatthew Finlay <matt@mellanox.com>
      Reported-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      69976fb1
    • Gal Pressman's avatar
      net/mlx5: Unmap only the relevant IO memory mapping · 5f8a02a4
      Gal Pressman authored
      When freeing UAR the driver tries to unmap uar->map and uar->bf_map
      which are mutually exclusive thus always unmapping a NULL pointer.
      Make sure we only call iounmap() once, for the actual mapping.
      
      Fixes: 0ba42241 ('net/mlx5: Fix global UAR mapping')
      Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
      Reported-by: default avatarDoron Tsur <doront@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f8a02a4
    • Ping Cheng's avatar
      HID: wacom: add missed stylus_in_proximity line back · eff6ca97
      Ping Cheng authored
      Commit 7e129783 ("HID: wacom: break out wacom_intuos_get_tool_type") by accident
      removed stylus_in_proximity flag for Intuos series while shuffling the code
      around.
      
      Fix that by reintroducing that flag setting in wacom_intuos_inout(), where
      it originally was.
      
      Fixes: 7e129783 ("HID: wacom: break out wacom_intuos_get_tool_type")
      Signed-off-by: default avatarPing Cheng <pingc@wacom.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      eff6ca97
    • Miklos Szeredi's avatar
      fuse: update mailing list in MAINTAINERS · 4441f63a
      Miklos Szeredi authored
      The fuse mailing list seems not to be open anymore.  The discussion on
      fuse-devel@... is mostly userspace related anyway.
      
      Reported-by: Andreas Gruenbacher <agruenba@redhat.com> 
      Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
      4441f63a
    • Neil Horman's avatar
      netem: Segment GSO packets on enqueue · 6071bd1a
      Neil Horman authored
      This was recently reported to me, and reproduced on the latest net kernel,
      when attempting to run netperf from a host that had a netem qdisc attached
      to the egress interface:
      
      [  788.073771] ---------------------[ cut here ]---------------------------
      [  788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda()
      [  788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962
      data_len=0 gso_size=1448 gso_type=1 ip_summed=3
      [  788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif
      ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul
      glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si
      i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter
      pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c
      sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt
      i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci
      crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp
      serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log
      dm_mod
      [  788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G        W
      ------------   3.10.0-327.el7.x86_64 #1
      [  788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012
      [  788.542260]  ffff880437c036b8 f7afc56532a53db9 ffff880437c03670
      ffffffff816351f1
      [  788.576332]  ffff880437c036a8 ffffffff8107b200 ffff880633e74200
      ffff880231674000
      [  788.611943]  0000000000000001 0000000000000003 0000000000000000
      ffff880437c03710
      [  788.647241] Call Trace:
      [  788.658817]  <IRQ>  [<ffffffff816351f1>] dump_stack+0x19/0x1b
      [  788.686193]  [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0
      [  788.713803]  [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80
      [  788.741314]  [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100
      [  788.767018]  [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda
      [  788.796117]  [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190
      [  788.823392]  [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem]
      [  788.854487]  [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570
      [  788.880870]  [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0
      ...
      
      The problem occurs because netem is not prepared to handle GSO packets (as it
      uses skb_checksum_help in its enqueue path, which cannot manipulate these
      frames).
      
      The solution I think is to simply segment the skb in a simmilar fashion to the
      way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes.
      When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt
      the first segment, and enqueue the remaining ones.
      
      tested successfully by myself on the latest net kernel, to which this applies
      Signed-off-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      CC: Jamal Hadi Salim <jhs@mojatatu.com>
      CC: "David S. Miller" <davem@davemloft.net>
      CC: netem@lists.linux-foundation.org
      CC: eric.dumazet@gmail.com
      CC: stephen@networkplumber.org
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6071bd1a
    • David S. Miller's avatar
      Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge · 9b40d5aa
      David S. Miller authored
      Antonio Quartulli says:
      
      ====================
      In this small batch of patches you have:
      - a fix for our Distributed ARP Table that makes sure that the input
        provided to the hash function during a query is the same as the one
        provided during an insert (so to prevent false negatives), by Antonio
        Quartulli
      - a fix for our new protocol implementation B.A.T.M.A.N. V that ensures
        that a hard interface is properly re-activated when it is brought down
        and then up again, by Antonio Quartulli
      - two fixes respectively to the reference counting of the tt_local_entry
        and neigh_node objects, by Sven Eckelmann. Such bug is rather severe
        as it would prevent the netdev objects references by batman-adv from
        being released after shutdown.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b40d5aa
  4. 02 May, 2016 3 commits
    • Linus Torvalds's avatar
      Minimal fix-up of bad hashing behavior of hash_64() · 689de1d6
      Linus Torvalds authored
      This is a fairly minimal fixup to the horribly bad behavior of hash_64()
      with certain input patterns.
      
      In particular, because the multiplicative value used for the 64-bit hash
      was intentionally bit-sparse (so that the multiply could be done with
      shifts and adds on architectures without hardware multipliers), some
      bits did not get spread out very much.  In particular, certain fairly
      common bit ranges in the input (roughly bits 12-20: commonly with the
      most information in them when you hash things like byte offsets in files
      or memory that have block factors that mean that the low bits are often
      zero) would not necessarily show up much in the result.
      
      There's a bigger patch-series brewing to fix up things more completely,
      but this is the fairly minimal fix for the 64-bit hashing problem.  It
      simply picks a much better constant multiplier, spreading the bits out a
      lot better.
      
      NOTE! For 32-bit architectures, the bad old hash_64() remains the same
      for now, since 64-bit multiplies are expensive.  The bigger hashing
      cleanup will replace the 32-bit case with something better.
      
      The new constants were picked by George Spelvin who wrote that bigger
      cleanup series.  I just picked out the constants and part of the comment
      from that series.
      
      Cc: stable@vger.kernel.org
      Cc: George Spelvin <linux@horizon.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      689de1d6
    • Linus Torvalds's avatar
      Merge tag 'md/4.6-rc6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md · 98bcf286
      Linus Torvalds authored
      Pull MD fixes from Shaohua Li:
       "This update includes several trival fixes.  The only important one is
        to fix MD bio merge, which has big performance impact"
      
      * tag 'md/4.6-rc6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
        raid5: delete unnecessary warnning
        MD: make bio mergeable
        md/raid0: remove empty line printk from dump_zones
        md/raid0: fix uninitialized variable bug
      98bcf286
    • Linus Torvalds's avatar
      Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs · 33656a1f
      Linus Torvalds authored
      Pull UDF fix from Jan Kara:
       "A fix of a regression in UDF that got introduced in 4.6-rc1 by one of
        the charset encoding fixes"
      
      * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
        udf: Fix conversion of 'dstring' fields to UTF8
      33656a1f