- 08 Jul, 2016 39 commits
-
-
Bhaktipriya Shridhar authored
The workqueue "work_queues" enables hotplugging. It has a single work item(&state->delayed_work_enable_hotplug) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been sync cancelled in adv7842_remove() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Bhaktipriya Shridhar authored
The workqueue "work_thread" is involved in JPEG quality update. It has a single work item(&sd->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in sd_stop0() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antonio Ospite authored
v4l2-compliance fails with this message: fail: v4l2-test-buffers.cpp(250): \ timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && \ timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY ... test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL When setting the frame time, gspca uses v4l2_get_timestamp() which uses ktime_get_ts() which uses ktime_get_ts64() which returns a monotonic timestamp, so it's safe to initialize the buffer flags to V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC to fix the failure. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antonio Ospite authored
According to v4l2-compliance VIDIOC_ENUM_FRAMEINTERVALS should fail for unsupported frame sizes, but gspca is too tolerant and tries to find the frame intervals for the frame size nearest to the requested one. This makes v4l2-compliance fail with this message: fail: v4l2-test-formats.cpp(123): \ found frame intervals for invalid size 321x240 test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL Fix this by using an exact match for the frame size when enumerating frame intervals, and retuning an error if the frame size for which the frame intervals have been asked is not supported. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antonio Ospite authored
The name wxh_to_nearest_mode() reflects better what the function does. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antonio Ospite authored
Set the frame _interval_ type to V4L2_FRMIVAL_TYPE_DISCRETE instead of using V4L2_FRMSIZE_TYPE_DISCRETE which is meant for frame _size_. The old and new values happen to be the same so there is no functional change. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antonio Ospite authored
When writing the change in commit dcc7fdbe ("[media] gspca: ov534/topro: prevent a division by 0") I used magic numbers for the default framerate to minimize the code footprint to make it easier to backport the patch to the stable trees. However it's better if the default framerate has its own define to avoid risking using different values in different places, and for readability. While at it also remove some trivial comments about the framerates which don't add much to the code anymore. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Arnd Bergmann authored
The pwc driver causes a warning when CONFIG_USB_PWC_INPUT_EVDEV is unset: drivers/media/usb/pwc/pwc-if.c: In function 'usb_pwc_probe': drivers/media/usb/pwc/pwc-if.c:1115:1: warning: label 'err_video_unreg' defined but not used [-Wunused-label] This moves the unused label and code inside another #ifdef to get rid of the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Make this a proper typed array. Drop the old allocate context code since that is no longer used. Note that the memops functions now get a struct device pointer instead of the struct device ** that was there initially (actually a void pointer to a struct containing only a struct device pointer). This code is now a lot cleaner. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Florian Echtler <floe@butterbrot.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Stop using alloc_ctx as that is now no longer needed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
The allocation context is nothing more than a per-plane device pointer to use when allocating buffers. So just provide a dev pointer in vb2_queue for that purpose and drivers can skip allocating/releasing/filling in the allocation context unless they require different per-plane device pointers as used by some Samsung SoCs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Florian Echtler <floe@butterbrot.org> Cc: Federico Vaga <federico.vaga@gmail.com> Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Benoit Parrot <bparrot@ti.com> Cc: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Make the dma attributes struct part of vb2_queue. This greatly simplifies the remainder of the patch series since the dma_contig alloc context is now (as before) just a struct device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Sylwester Nawrocki authored
This fixes dropping ownership of buffers in the driver's stop_streaming callback, so buffers on the memory-to-memory video nodes are properly released, also in case when the driver has a buffer only on one of the queues (OUTPUT, CAPTURE) before the video node close. The issue was being reported by videobuf2 with a following warning while checking q->owned_by_drv_count: [ 2498.310766] WARNING: CPU: 0 PID: 9358 at drivers/media/v4l2-core/videobuf2-core.c:1818 __vb2_queue_cancel+0xe8/0x14c [ 2498.320258] Modules linked in: [ 2498.323212] CPU: 0 PID: 9358 Comm: v4l2_decode Not tainted 4.7.0-rc4-next-20160627 #1210 [ 2498.331284] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2498.331327] [<c010d738>] (unwind_backtrace) from [<c010a4b0>] (show_stack+0x10/0x14) [ 2498.331344] [<c010a4b0>] (show_stack) from [<c031a4ac>] (dump_stack+0x74/0x94) [ 2498.331358] [<c031a4ac>] (dump_stack) from [<c011a52c>] (__warn+0xd4/0x100) [ 2498.331369] [<c011a52c>] (__warn) from [<c011a578>] (warn_slowpath_null+0x20/0x28) [ 2498.331381] [<c011a578>] (warn_slowpath_null) from [<c04ed420>] (__vb2_queue_cancel+0xe8/0x14c) [ 2498.331395] [<c04ed420>] (__vb2_queue_cancel) from [<c04ee10c>] (vb2_core_queue_release+0x18/0x38) [ 2498.331406] [<c04ee10c>] (vb2_core_queue_release) from [<c04eab50>] (v4l2_m2m_ctx_release+0x1c/0x28) [ 2498.331420] [<c04eab50>] (v4l2_m2m_ctx_release) from [<c04fe184>] (fimc_m2m_release+0x24/0x78) [ 2498.331437] [<c04fe184>] (fimc_m2m_release) from [<c04d76c8>] (v4l2_release+0x34/0x74) [ 2498.331455] [<c04d76c8>] (v4l2_release) from [<c01dc8d4>] (__fput+0x80/0x1bc) [ 2498.331469] [<c01dc8d4>] (__fput) from [<c0132edc>] (task_work_run+0xc0/0xe4) [ 2498.331482] [<c0132edc>] (task_work_run) from [<c011d460>] (do_exit+0x304/0xa24) [ 2498.331493] [<c011d460>] (do_exit) from [<c011dccc>] (do_group_exit+0x3c/0xbc) [ 2498.331505] [<c011dccc>] (do_group_exit) from [<c0126cac>] (get_signal+0x200/0x65c) [ 2498.331517] [<c0126cac>] (get_signal) from [<c010e928>] (do_signal+0x84/0x3c4) [ 2498.331532] [<c010e928>] (do_signal) from [<c010a0ec>] (do_work_pending+0xa4/0xb4) [ 2498.331545] [<c010a0ec>] (do_work_pending) from [<c0107954>] (slow_work_pending+0xc/0x20) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Javier Martinez Canillas authored
According to the V4L2 documentation the driver and card fields should be used to identify the driver and the device but the s5p-mfc driver fills those field using the platform device name, which in turn is the name of the device DT node. So not only the filled information isn't correct but also the same values are used in all the fields for both the encoder and decoder video devices. Before this patch: Driver Info (not using libv4l2): Driver name : 11000000.codec Card type : 11000000.codec Bus info : platform:11000000.codec Driver version: 4.7.0 Driver Info (not using libv4l2): Driver name : 11000000.codec Card type : 11000000.codec Bus info : platform:11000000.codec Driver version: 4.7.0 After this patch: Driver Info (not using libv4l2): Driver name : s5p-mfc Card type : s5p-mfc-dec Bus info : platform:11000000.codec Driver version: 4.7.0 Driver Info (not using libv4l2): Driver name : s5p-mfc Card type : s5p-mfc-enc Bus info : platform:11000000.codec Driver version: 4.7.0 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Javier Martinez Canillas authored
The driver doesn't set the struct v4l2_capability bus_info field so the v4l2-compliance tool reports the following errors for VIDIOC_QUERYCAP: Required ioctls: VIDIOC_QUERYCAP returned 0 (Success) fail: v4l2-compliance.cpp(304): string empty fail: v4l2-compliance.cpp(528): check_ustring(vcap.bus_info, sizeof(vcap.bus_info)) test VIDIOC_QUERYCAP: FAIL This patch fixes by setting the field in VIDIOC_QUERYCAP ioctl handler: Required ioctls: VIDIOC_QUERYCAP returned 0 (Success) test VIDIOC_QUERYCAP: OK Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Javier Martinez Canillas authored
The streaming field in struct vb2_queue is meant to be private and should not be used by drivers directly, instead the vb2_is_streaming() function should be used to check the videobuf2 queue streaming status. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Javier Martinez Canillas authored
The V4L2 documentation says that applications must call the VIDIOC_REQBUFS ioctl to determine if a memory mapped, user pointer or DMABUF based I/O is supported by the driver. For example GStreamer does this by first calling VIDIOC_REQBUFS with count zero for all the possible streaming I/O methods and then finally doing the real VIDIOC_REQBUFS with count N using a known to be supported memory type. But the driver prints an error on VIDIOC_REQBUFS if the memory type is not supported which leads to the following errors that can confuse the users: [ 178.704390] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported [ 178.704666] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported [ 178.714956] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported [ 178.715229] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Javier Martinez Canillas authored
The function comment has an obvious typo error, so fix it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
This patch fixes the error path in the driver probe, so in case of any failure, the resources are not leaked. Reported-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Shuah Khan authored
Fix null pointer deference in clk_core_enable() when driver unbind is run when there is an application has an active pipeline playing. s5p_mfc_release() gets called after s5p_mfc_final_pm() disables and does clk_put() and s5p_mfc_release() attempts to enable clock and runs into null pointer deference accessing invalid pointer. [ 4869.434709] Unable to handle kernel NULL pointer dereference at virtual addr0 [ 4869.441312] pgd = e91ac000 [ 4869.443996] [00000010] *pgd=ba4f7835 [ 4869.447552] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 4869.452921] Modules linked in: cpufreq_userspace cpufreq_powersave cpufreq_ca [ 4869.471728] CPU: 4 PID: 2965 Comm: lt-gst-launch-1 Not tainted 4.7.0-rc2-nex0 [ 4869.481778] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4869.487844] task: e91f1e00 ti: ed650000 task.ti: ed650000 [ 4869.493227] PC is at clk_core_enable+0x4c/0x98 [ 4869.497637] LR is at clk_core_enable+0x40/0x98 [ 4869.502056] pc : [<c0559714>] lr : [<c0559708>] psr: 60060093 [ 4869.502056] sp : ed651f18 ip : 00000000 fp : 002641b4 [ 4869.513493] r10: e9088c08 r9 : 00000008 r8 : ed676d68 [ 4869.518692] r7 : ee3ac000 r6 : bf16b3c0 r5 : a0060013 r4 : ee37a8c0 [ 4869.525191] r3 : 00000000 r2 : 00000001 r1 : 00000004 r0 : 00000000 [ 4869.531692] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment noe [ 4869.538883] Control: 10c5387d Table: 691ac06a DAC: 00000051 [ 4869.544603] Process lt-gst-launch-1 (pid: 2965, stack limit = 0xed650210) [ 4869.551361] Stack: (0xed651f18 to 0xed652000) [ 4869.555694] 1f00: ee373 [ 4869.563841] 1f20: bf16b3c0 c055a0e0 ee3ac004 ed676c10 bf16b3c0 bf1558e0 e9080 [ 4869.571986] 1f40: 00000000 ee98a510 ee502e40 bf047344 e9088c00 ee986938 00004 [ 4869.580132] 1f60: 00000000 00000000 e91f2204 00000000 c0b4658c e91f1e00 c0100 [ 4869.588277] 1f80: 00000000 c0135c58 ed650000 c0107904 ed651fb0 00000006 c0104 [ 4869.596423] 1fa0: 00229500 b6581000 b6f7b544 c0107794 00000000 00000002 b6f90 [ 4869.604568] 1fc0: 00229500 b6581000 b6f7b544 00000006 0017b600 0002c038 00264 [ 4869.612714] 1fe0: 00000000 bee56ef0 00000000 b6d49612 00060030 00000006 00000 [ 4869.620865] [<c0559714>] (clk_core_enable) from [<c055a0e0>] (clk_enable+0x2) [ 4869.628509] [<c055a0e0>] (clk_enable) from [<bf1558e0>] (s5p_mfc_release+0x3) [ 4869.637111] [<bf1558e0>] (s5p_mfc_release [s5p_mfc]) from [<bf047344>] (v4l2) [ 4869.646706] [<bf047344>] (v4l2_release [videodev]) from [<c01e4274>] (__fput) [ 4869.654745] [<c01e4274>] (__fput) from [<c0135c58>] (task_work_run+0x94/0xc8) [ 4869.661852] [<c0135c58>] (task_work_run) from [<c010a9d4>] (do_work_pending+) [ 4869.669735] [<c010a9d4>] (do_work_pending) from [<c0107794>] (slow_work_pend) [ 4869.677878] Code: ebffffef e3500000 18bd8070 e5943004 (e5933010) Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Shuah Khan authored
s5p_mfc_remove() fails to release encoder and decoder video devices. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Shuah Khan authored
Fix Decoder and encoder video device double release in probe error path. video_device_release(dev->vfd_dec) get called twice if decoder register fails. Also, video_device_release(dev->vfd_enc) get called twice if encoder register fails. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Tiffany Lin authored
Add video encoder node for MT8173 Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Tiffany Lin authored
Add h264 encoder driver for MT8173 Signed-off-by: PoChun Lin <pochun.lin@mediatek.com> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Tiffany Lin authored
Add vp8 encoder driver for MT8173 Signed-off-by: PoChun Lin <pochun.lin@mediatek.com> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Tiffany Lin authored
Add v4l2 layer encoder driver for MT8173 Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> [hans.verkuil@cisco.com: drop unnecessary ARM || ARM64 dependency] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Tiffany Lin authored
Add a DT binding documentation of Video Encoder for the MT8173 SoC from Mediatek. Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Andrew-CT Chen authored
Add VPU drivers for MT8173 Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Andrew-CT Chen authored
The VPU driver for hw video codec embedded in Mediatek's MT8173 SOCs. It is able to handle video decoding/encoding of in a range of formats. The driver provides with VPU firmware download, memory management and the communication interface between CPU and VPU. For VPU initialization, it will create virtual memory for CPU access and IOMMU address for vcodec hw device access. When a decode/encode instance opens a device node, vpu driver will download vpu firmware to the device. A decode/encode instant will decode/encode a frame using VPU interface to interrupt vpu to handle decoding/encoding jobs. Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> [hans.verkuil@cisco.com: drop unnecessary ARM || ARM64 dependency] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 28 Jun, 2016 1 commit
-
-
Laurent Pinchart authored
YUV 4:1:1 uses 12 bits per pixel on average, not 16. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-