- 04 Jan, 2020 38 commits
-
-
Tyrel Datwyler authored
[ Upstream commit 07376867 ] The device tree is in big endian format and any properties directly retrieved using OF helpers that don't explicitly byte swap should be annotated. In particular there are several places where we grab the opaque property value for the old ibm,drc-* properties and the ibm,my-drc-index property. Fix this for better static checking by annotating values we know to explicitly big endian, and byte swap where appropriate. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-9-git-send-email-tyreld@linux.ibm.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Tyrel Datwyler authored
[ Upstream commit 52e2b0f1 ] In the event that the partition is migrated to a platform with older firmware that doesn't support the ibm,drc-info property the device tree is modified to remove the ibm,drc-info property and replace it with the older style ibm,drc-* properties for types, names, indexes, and power-domains. One of the requirements of the drc-info firmware feature is that the client is able to handle both the new property, and old style properties at runtime. Therefore we can't rely on the firmware feature alone to dictate which property is currently present in the device tree. Fix this short coming by checking explicitly for the ibm,drc-info property, and falling back to the older ibm,drc-* properties if it doesn't exist. Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit 7d821274 ] When unloading the module, one gets ------------[ cut here ]------------ Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt. WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0 ... We only have one static fake device. There is nothing to do when releasing the device (via cmm_exit()). Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Bean Huo authored
[ Upstream commit cfcbae38 ] In function __ufshcd_query_descriptor(), in the event of an error happening, we directly goto out_unlock and forget to invaliate hba->dev_cmd.query.descriptor pointer. This results in this pointer still valid in ufshcd_copy_query_response() for other query requests which go through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and system hangs. Log as shown below: Unable to handle kernel paging request at virtual address ffff000012233c40 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c [ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003, pmd=00000000ba8b8003, pte=0000000000000000 Internal error: Oops: 96000047 [#2] PREEMPT SMP ... Call trace: __memcpy+0x74/0x180 ufshcd_issue_devman_upiu_cmd+0x250/0x3c0 ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8 ufs_bsg_request+0x178/0x3b0 bsg_queue_rq+0xc0/0x118 blk_mq_dispatch_rq_list+0xb0/0x538 blk_mq_sched_dispatch_requests+0x18c/0x1d8 __blk_mq_run_hw_queue+0xb4/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x1ec/0x470 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7) ---[ end trace 793e1eb5dff69f2d ]--- note: kworker/0:2H[2054] exited with preempt_count 1 This patch is to move "descriptor = NULL" down to below the label "out_unlock". Fixes: d44a5f98(ufs: query descriptor API) Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.comReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tyrel Datwyler authored
[ Upstream commit 9723c25f ] The first entry of the ibm,drc-info property is an int encoded count of the number of drc-info entries that follow. The "value" pointer returned by of_prop_next_u32() is still pointing at the this value when we call of_read_drc_info_cell(), but the helper function expects that value to be pointing at the first element of an entry. Fix up by incrementing the "value" pointer to point at the first element of the first drc-info entry prior. Signed-off-by:
-
James Smart authored
[ Upstream commit 6c6d59e0 ] Coverity reported the following: *** CID 101747: Null pointer dereferences (FORWARD_NULL) /drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp() 4433 kfree(mp); 4434 } 4435 mempool_free(mbox, phba->mbox_mem_pool); 4436 } 4437 out: 4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { vvv CID 101747: Null pointer dereferences (FORWARD_NULL) vvv Dereferencing null pointer "shost". 4439 spin_lock_irq(shost->host_lock); 4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI); 4441 spin_unlock_irq(shost->host_lock); 4442 4443 /* If the node is not being used by another discovery thread, 4444 * and we are sending a reject, we are done with it. Fix by adding a check for non-null shost in line 4438. The scenario when shost is set to null is when ndlp is null. As such, the ndlp check present was sufficient. But better safe than sorry so add the shost check. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 101747 ("Null pointer dereferences") Fixes: 2e0fef85 ("[SCSI] lpfc: NPIV: split ports") CC: James Bottomley <James.Bottomley@SteelEye.com> CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com> CC: linux-next@vger.kernel.org Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 6fcbcec9 ] Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu fractions as signed 64-bit int, filters negative values and then reports lower half as signed 32-bit int. Result may looks like: fs.quota.allocated_dquots = 22327 fs.quota.cache_hits = -489852115 fs.quota.drops = -487288718 fs.quota.free_dquots = 22083 fs.quota.lookups = -486883485 fs.quota.reads = 22327 fs.quota.syncs = 335064 fs.quota.writes = 3088689 Values bigger than 2^31-1 reported as negative. All counters except "allocated_dquots" and "free_dquots" are monotonic, thus they should be reported as is without filtering negative values. Kernel doesn't have generic helper for 64-bit sysctl yet, let's use at least unsigned long. Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit 52ecc876 ] If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.comSigned-off-by:
-
Florian Fainelli authored
[ Upstream commit 27eebb60 ] If the 'brcm,irq-can-wake' property is specified, make sure we also enable the corresponding parent interrupt we are attached to. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Michael Hennerich authored
[ Upstream commit fc59462c ] For an external clock source, which is gated via a GPIO, the rate change should typically be propagated to the parent clock. The situation where we are requiring this propagation, is when an external clock is connected to override an internal clock (which typically has a fixed rate). The external clock can have a different rate than the internal one, and may also be variable, thus requiring the rate propagation. This rate change wasn't propagated until now, and it's unclear about cases where this shouldn't be propagated. Thus, it's unclear whether this is fixing a bug, or extending the current driver behavior. Also, it's unsure about whether this may break any existing setups; in the case that it does, a device-tree property may be added to disable this flag. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lkml.kernel.org/r/20191108071718.17985-1-alexandru.ardelean@analog.comSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Jeffrey Hugo authored
[ Upstream commit efd164b5 ] Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just some constant ratio from the input across the entire frequency range. It would be great if we could specify the frequency table as a single entry constant ratio instead of a long list, ie: { .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 }, { } So, lets support that. We need to fix a corner case in qcom_find_freq() where if the freq table is non-null, but has no frequencies, we end up returning an "entry" before the table array, which is bad. Then, we need ignore the freq from the table, and instead base everything on the requested freq. Suggested-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
Chao Yu authored
[ Upstream commit 2a60637f ] As Eric reported: RENAME_EXCHANGE support was just added to fsstress in xfstests: commit 65dfd40a97b6bbbd2a22538977bab355c5bc0f06 Author: kaixuxia <xiakaixu1987@gmail.com> Date: Thu Oct 31 14:41:48 2019 +0800 fsstress: add EXCHANGE renameat2 support This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors. I'm not sure what the problem is, but it still happens even with all the fs-verity stuff in the test commented out, so that the test just runs fsstress. generic/579 23s ... [10:02:25] [ 7.745370] run fstests generic/579 at 2019-11-04 10:02:25 _check_generic_filesystem: filesystem on /dev/vdc is inconsistent (see /results/f2fs/results-default/generic/579.full for details) [10:02:47] Ran: generic/579 Failures: generic/579 Failed 1 of 1 tests Xunit report: /results/f2fs/results-default/result.xml Here's the contents of 579.full: _check_generic_filesystem: filesystem on /dev/vdc is inconsistent *** fsck.f2fs output *** [ASSERT] (__chk_dots_dentries:1378) --> Bad inode number[0x24] for '..', parent parent ino is [0xd10] The root cause is that we forgot to update directory's i_pino during cross_rename, fix it. Fixes: 32f9bc25 ("f2fs: support ->rename2()") Signed-off-by:
Chao Yu <yuchao0@huawei.com> Tested-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
James Smart authored
[ Upstream commit 7cfd5639 ] If the driver receives a login that is later then LOGO'd by the remote port (aka ndlp), the driver, upon the completion of the LOGO ACC transmission, will logout the node and unregister the rpi that is being used for the node. As part of the unreg, the node's rpi value is replaced by the LPFC_RPI_ALLOC_ERROR value. If the port is subsequently offlined, the offline walks the nodes and ensures they are logged out, which possibly entails unreg'ing their rpi values. This path does not validate the node's rpi value, thus doesn't detect that it has been unreg'd already. The replaced rpi value is then used when accessing the rpi bitmask array which tracks active rpi values. As the LPFC_RPI_ALLOC_ERROR value is not a valid index for the bitmask, it may fault the system. Revise the rpi release code to detect when the rpi value is the replaced RPI_ALLOC_ERROR value and ignore further release steps. Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.comSigned-off-by:
-
Bart Van Assche authored
[ Upstream commit f6b8540f ] According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical blocks must be transferred. Make the SCSI tracing code follow SBC-2. Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.orgSigned-off-by:
-
Jan Kara authored
[ Upstream commit 015c6033 ] jbd2 statistics counting number of blocks logged in a transaction was wrong. It didn't count the commit block and more importantly it didn't count revoke descriptor blocks. Make sure these get properly counted. Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Matthew Bobrowski authored
[ Upstream commit 2e9b51d7 ] This patch addresses what Dave Chinner had discovered and fixed within commit: 7684e2c4. This changes does not have any user visible impact for ext4 as none of the current users of ext4_iomap_begin() that extend files depend on IOMAP_F_DIRTY. When doing a direct IO that spans the current EOF, and there are written blocks beyond EOF that extend beyond the current write, the only metadata update that needs to be done is a file size extension. However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that there is IO completion metadata updates required, and hence we may fail to correctly sync file size extensions made in IO completion when O_DSYNC writes are being used and the hardware supports FUA. Hence when setting IOMAP_F_DIRTY, we need to also take into account whether the iomap spans the current EOF. If it does, then we need to mark it dirty so that IO completion will call generic_write_sync() to flush the inode size update to stable storage correctly. Signed-off-by:
Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/8b43ee9ee94bee5328da56ba0909b7d2229ef150.1572949325.git.mbobrowski@mbobrowski.orgSigned-off-by:
-
Matthew Bobrowski authored
[ Upstream commit 548feebe ] This patch updates the lock pattern in ext4_direct_IO_read() to not block on inode lock in cases of IOCB_NOWAIT direct I/O reads. The locking condition implemented here is similar to that of 942491c9 ("xfs: fix AIM7 regression"). Fixes: 16c54688 ("ext4: Allow parallel DIO reads") Signed-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 16f6b67c ] With large memory (8TB and more) hotplug, we can get soft lockup warnings as below. These were caused by a long loop without any explicit cond_resched which is a problem for !PREEMPT kernels. Avoid this using cond_resched() while inserting hash page table entries. We already do similar cond_resched() in __add_pages(), see commit f64ac5e6 ("mm, memory_hotplug: add scheduling point to __add_pages"). rcu: 3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001 (t=24003 jiffies g=4285 q=2002) NMI backtrace for cpu 3 CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2 Call Trace: dump_stack+0xb0/0xf4 (unreliable) nmi_cpu_backtrace+0x124/0x130 nmi_trigger_cpumask_backtrace+0x1ac/0x1f0 arch_trigger_cpumask_backtrace+0x28/0x3c rcu_dump_cpu_stacks+0xf8/0x154 rcu_sched_clock_irq+0x878/0xb40 update_process_times+0x48/0x90 tick_sched_handle.isra.16+0x4c/0x80 tick_sched_timer+0x68/0xe0 __hrtimer_run_queues+0x180/0x430 hrtimer_interrupt+0x110/0x300 timer_interrupt+0x108/0x2f0 decrementer_common+0x114/0x120 --- interrupt: 901 at arch_add_memory+0xc0/0x130 LR = arch_add_memory+0x74/0x130 memremap_pages+0x494/0x650 devm_memremap_pages+0x3c/0xa0 pmem_attach_disk+0x188/0x750 nvdimm_bus_probe+0xac/0x2c0 really_probe+0x148/0x570 driver_probe_device+0x19c/0x1d0 device_driver_attach+0xcc/0x100 bind_store+0x134/0x1c0 drv_attr_store+0x44/0x60 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1a0/0x270 __vfs_write+0x3c/0x70 vfs_write+0xd0/0x260 ksys_write+0xdc/0x130 system_call+0x5c/0x68 Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Anthony Steinhauser authored
[ Upstream commit 8e6b6da9 ] Some PowerPC CPUs are vulnerable to L1TF to the same extent as to Meltdown. It is also mitigated by flushing the L1D on privilege transition. Currently the sysfs gives a false negative on L1TF on CPUs that I verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV T2P9D01. Signed-off-by:
Anthony Steinhauser <asteinhauser@google.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 4411464d ] If a hardware-specific driver does not provide a name, the timer-of core falls back to device_node.name. Due to generic DT node naming policies, that name is almost always "timer", and thus doesn't identify the actual timer used. Fix this by using device_node.full_name instead, which includes the unit addrees. Example impact on /proc/timer_list: -Clock Event Device: timer +Clock Event Device: timer@fcfec400 Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016144747.29538-3-geert+renesas@glider.beSigned-off-by:
-
Chuhong Yuan authored
[ Upstream commit 6e001f6a ] asm9260_timer_init misses a check for of_clk_get. Add a check for it and print errors like other clocksource drivers. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Guido Günther authored
[ Upstream commit 396128d2 ] Instead use devm_regulator_get_optional since the regulator is optional and check for errors. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Acked-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9ff6aa02 ] debug_dma_dump_mappings() can take a lot of cpu cycles : lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump 163435 /sys/kernel/debug/dma-api/dump real 0m0.463s user 0m0.003s sys 0m0.459s Let's add a cond_resched() to avoid holding cpu for too long. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Corentin Labbe <clabbe@baylibre.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit e44ff9ea ] Some of our scripts are passed $objdump and then call it as "$objdump". This doesn't work if it contains spaces because we're using ccache, for example you get errors such as: ./arch/powerpc/tools/relocs_check.sh: line 48: ccache ppc64le-objdump: No such file or directory ./arch/powerpc/tools/unrel_branch_check.sh: line 26: ccache ppc64le-objdump: No such file or directory Fix it by not quoting the string when we expand it, allowing the shell to do the right thing for us. Fixes: a71aa05e ("powerpc: Convert relocs_check to a shell script using grep") Fixes: 4ea80652 ("powerpc/64s: Tool to flag direct branches from unrelocated interrupt vectors") Signed-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 75838a32 ] If the hypervisor returned H_PTEG_FULL for H_ENTER hcall, retry a hash page table insert by removing a random entry from the group. After some runtime, it is very well possible to find all the 8 hash page table entry slot in the hpte group used for mapping. Don't fail a bolted entry insert in that case. With Storage class memory a user can find this error easily since a namespace enable/disable is equivalent to memory add/remove. This results in failures as reported below: $ ndctl create-namespace -r region1 -t pmem -m devdax -a 65536 -s 100M libndctl: ndctl_dax_enable: dax1.3: failed to enable Error: namespace1.2: failed to enable failed to create namespace: No such device or address In kernel log we find the details as below: Unable to create mapping for hot added memory 0xc000042006000000..0xc00004200d000000: -1 dax_pmem: probe of dax1.3 failed with error -14 This indicates that we failed to create a bolted hash table entry for direct-map address backing the namespace. We also observe failures such that not all namespaces will be enabled with ndctl enable-namespace all command. Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit eb8e20f8 ] accumulate_stolen_time() is called prior to interrupt state being reconciled, which can trip the warning in arch_local_irq_restore(): WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130 ... NIP .arch_local_irq_restore+0x9c/0x130 LR .rb_start_commit+0x38/0x80 Call Trace: .ring_buffer_lock_reserve+0xe4/0x620 .trace_function+0x44/0x210 .function_trace_call+0x148/0x170 .ftrace_ops_no_ops+0x180/0x1d0 ftrace_call+0x4/0x8 .accumulate_stolen_time+0x1c/0xb0 decrementer_common+0x124/0x160 For now just mark it as notrace. We may change the ordering to call it after interrupt state has been reconciled, but that is a larger change. Signed-off-by:
-
Xiang Chen authored
[ Upstream commit 550c0d89 ] For IOs from upper layer, preemption may be disabled as it may be called by function __blk_mq_delay_run_hw_queue which will call get_cpu() (it disables preemption). So if flags HISI_SAS_REJECT_CMD_BIT is set in function hisi_sas_task_exec(), it may disable preempt twice after down() and up() which will cause following call trace: BUG: scheduling while atomic: fio/60373/0x00000002 Call trace: dump_backtrace+0x0/0x150 show_stack+0x24/0x30 dump_stack+0xa0/0xc4 __schedule_bug+0x68/0x88 __schedule+0x4b8/0x548 schedule+0x40/0xd0 schedule_timeout+0x200/0x378 __down+0x78/0xc8 down+0x54/0x70 hisi_sas_task_exec.isra.10+0x598/0x8d8 [hisi_sas_main] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main] sas_queuecommand+0x168/0x1b0 [libsas] scsi_queue_rq+0x2ac/0x980 blk_mq_dispatch_rq_list+0xb0/0x550 blk_mq_do_dispatch_sched+0x6c/0x110 blk_mq_sched_dispatch_requests+0x114/0x1d8 __blk_mq_run_hw_queue+0xb8/0x130 __blk_mq_delay_run_hw_queue+0x1c0/0x220 blk_mq_run_hw_queue+0xb0/0x128 blk_mq_sched_insert_requests+0xdc/0x208 blk_mq_flush_plug_list+0x1b4/0x3a0 blk_flush_plug_list+0xdc/0x110 blk_finish_plug+0x3c/0x50 blkdev_direct_IO+0x404/0x550 generic_file_read_iter+0x9c/0x848 blkdev_read_iter+0x50/0x78 aio_read+0xc8/0x170 io_submit_one+0x1fc/0x8d8 __arm64_sys_io_submit+0xdc/0x280 el0_svc_common.constprop.0+0xe0/0x1e0 el0_svc_handler+0x34/0x90 el0_svc+0x10/0x14 ... To solve the issue, check preemptible() to avoid disabling preempt multiple when flag HISI_SAS_REJECT_CMD_BIT is set. Link: https://lore.kernel.org/r/1571926105-74636-5-git-send-email-john.garry@huawei.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d6c9b31a ] These are called with IRQs disabled from csio_mgmt_tmo_handler() so we can't call spin_unlock_irq() or it will enable IRQs prematurely. Fixes: a3667aae ("[SCSI] csiostor: Chelsio FCoE offload driver") Link: https://lore.kernel.org/r/20191019085913.GA14245@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
James Smart authored
[ Upstream commit feff8b3d ] When operating in private loop mode, PLOGI exchanges are racing and the driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating the login with the other end causing the other end to abort its PLOGI as well. Discovery never fully completes. Fix by disabling the PLOGI abort when private loop and letting the state machine play out. Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.comSigned-off-by:
-
David Disseldorp authored
[ Upstream commit 9cef2a79 ] RFC 2307 states: For CHAP [RFC1994], in the first step, the initiator MUST send: CHAP_A=<A1,A2...> Where A1,A2... are proposed algorithms, in order of preference. ... For the Algorithm, as stated in [RFC1994], one value is required to be implemented: 5 (CHAP with MD5) LIO currently checks for this value by only comparing a single byte in the tokenized Algorithm string, which means that any value starting with a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by comparing the entire tokenized string. Reviewed-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
David Disseldorp <ddiss@suse.de> Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.deSigned-off-by:
-
Nicholas Graumann authored
[ Upstream commit 8a631a5a ] Whenever we reset the channel, we need to clear desc_pendingcount along with desc_submitcount. Otherwise when a new transaction is submitted, the irq coalesce level could be programmed to an incorrect value in the axidma case. This behavior can be observed when terminating pending transactions with xilinx_dma_terminate_all() and then submitting new transactions without releasing and requesting the channel. Signed-off-by:
Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 96d3ab80 ] Page tables that reside in physical memory beyond the 4 GiB boundary are currently not working properly. The reason is that when the physical address for page directory entries is read, it gets truncated at 32 bits and can cause crashes when passing that address to the DMA API. Fix this by first casting the PDE value to a dma_addr_t and then using the page frame number mask for the SMMU instance to mask out the invalid bits, which are typically used for mapping attributes, etc. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Ezequiel Garcia authored
[ Upstream commit 42bb97b8 ] IOMMU domain resource life is well-defined, managed by .domain_alloc and .domain_free. Therefore, domain-specific resources shouldn't be tied to the device life, but instead to its domain. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Chao Yu authored
[ Upstream commit fe1897ea ] generic/018 reports an inconsistent status of atime, the testcase is as below: - open file with O_SYNC - write file to construct fraged space - calc md5 of file - record {a,c,m}time - defrag file --- do nothing - umount & mount - check {a,c,m}time The root cause is, as f2fs enables lazytime by default, atime update will dirty vfs inode, rather than dirtying f2fs inode (by set with FI_DIRTY_INODE), so later f2fs_write_inode() called from VFS will fail to update inode page due to our skip: f2fs_write_inode() if (is_inode_flag_set(inode, FI_DIRTY_INODE)) return 0; So eventually, after evict(), we lose last atime for ever. To fix this issue, we need to check whether {a,c,m,cr}time is consistent in between inode cache and inode page, and only skip f2fs_update_inode() if f2fs inode is not dirty and time is consistent as well. Signed-off-by:
-
Evan Green authored
[ Upstream commit 463fa44e ] Across suspend and resume, we are seeing error messages like the following: atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121) This occurs because the driver leaves its IRQ enabled. Upon resume, there is an IRQ pending, but the interrupt is serviced before both the driver and the underlying I2C bus have been resumed. This causes EREMOTEIO errors. Disable the IRQ in suspend, and re-enable it on resume. If there are cases where the driver enters suspend with interrupts disabled, that's a bug we should fix separately. Signed-off-by:
Evan Green <evgreen@chromium.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 07b85824 ] Symptoms were seen of the driver not having valid data for mailbox commands. After debugging, the following sequence was found: The driver maintains a port-wide pointer of the mailbox command that is currently in execution. Once finished, the port-wide pointer is cleared (done in lpfc_sli4_mq_release()). The next mailbox command issued will set the next pointer and so on. The mailbox response data is only copied if there is a valid port-wide pointer. In the failing case, it was seen that a new mailbox command was being attempted in parallel with the completion. The parallel path was seeing the mailbox no long in use (flag check under lock) and thus set the port pointer. The completion path had cleared the active flag under lock, but had not touched the port pointer. The port pointer is cleared after the lock is released. In this case, the completion path cleared the just-set value by the parallel path. Fix by making the calls that clear mbox state/port pointer while under lock. Also slightly cleaned up the error path. Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.comSigned-off-by:
-
Sreekanth Reddy authored
[ Upstream commit 782b2818 ] When user issues diag register command from application with required size, and if driver unable to allocate the memory, then it will fail the register command. While failing the register command, driver is not currently clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set before trying to allocate the memory. As this bit is set, subsequent register command will be failed with BUSY status even when user wants to register the trace buffer will less memory. Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag register command with no memory status. Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 3f97aed6 ] An issue was seen discovering all SCSI Luns when a target device undergoes link bounce. The driver currently does not qualify the FC4 support on the target. Therefore it will send a SCSI PRLI and an NVMe PRLI. The expectation is that the target will reject the PRLI if it is not supported. If a PRLI times out, the driver will retry. The driver will not proceed with the device until both SCSI and NVMe PRLIs are resolved. In the failure case, the device is FCP only and does not respond to the NVMe PRLI, thus initiating the wait/retry loop in the driver. During that time, a RSCN is received (device bounced) causing the driver to issue a GID_FT. The GID_FT response comes back before the PRLI mess is resolved and it prematurely cancels the PRLI retry logic and leaves the device in a STE_PRLI_ISSUE state. Discovery with the target never completes or resets. Fix by resetting the node state back to STE_NPR_NODE when GID_FT completes, thereby restarting the discovery process for the node. Link: https://lore.kernel.org/r/20190922035906.10977-10-jsmart2021@gmail.comSigned-off-by:
-
- 31 Dec, 2019 2 commits
-
-
Greg Kroah-Hartman authored
-
Masami Hiramatsu authored
commit 91e2f539 upstream. Fix die_walk_lines() to list the function entry line correctly. Since the dwarf_entrypc() does not return the entry pc if the DIE has only range attribute, __die_walk_funclines() fails to list the declaration line (entry line) in that case. To solve this issue, this introduces die_entrypc() which correctly returns the entry PC (the first address range) even if the DIE has only range attribute. With this fix die_walk_lines() shows the function entry line is able to probe correctly. Fixes: 4cc9cec6 ("perf probe: Introduce lines walker interface") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
