Merge tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull move_mount updates from Christian Brauner:
 "This contains an extension to the move_mount() syscall making it
  possible to add a single private mount into an existing propagation
  tree.

  The use-case comes from the criu folks which have been struggling with
  restoring complex mount trees for a long time. Variations of this work
  have been discussed at Plumbers before, e.g.

      https://www.linuxplumbersconf.org/event/7/contributions/640/

  The extension to move_mount() enables criu to restore any set of mount
  namespaces, mount trees and sharing group trees without introducing
  yet more complexity into mount propagation itself.

  The changes required to criu to make use of this and restore complex
  propagation trees are available at

      https://github.com/Snorch/criu/commits/mount-v2-poc

  A cleaned-up version of this will go up for merging into the main criu
  repo after this lands"

* tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: add move_mount(MOVE_MOUNT_SET_GROUP) selftest
  move_mount: allow to add a mount into an existing group

Pull iomap updates from Darrick Wong:
 "The most notable externally visible change for this cycle is the
  addition of support for reads to inline tail fragments of files, which
  was requested by the erofs developers; and a correction for a kernel
  memory corruption bug if the sysadmin tries to activate a swapfile
  with more pages than the swapfile header suggests.

  We also now report writeback completion errors to the file mapping
  correctly, instead of munging all errors into EIO.

  Internally, the bulk of the changes are Christoph's patchset to reduce
  the indirect function call count by a third to a half by converting
  iomap iteration from a loop pattern to a generator/consumer pattern.
  As an added bonus, fsdax no longer open-codes iomap apply loops.

  Summary:

   - Simplify the bio_end_page usage in the buffered IO code.

   - Support reading inline data at nonzero offsets for erofs.

   - Fix some typos and bad grammar.

   - Convert kmap_atomic usage in the inline data read path.

   - Add some extra inline data input checking.

   - Fix a memory corruption bug stemming from iomap_swapfile_activate
     trying to activate more pages than mm was expecting.

   - Pass errnos through the page writeback code so that writeback
     errors are reported correctly instead of being munged to EIO.

   - Replace iomap_apply with a open-coded iterator loops to reduce the
     number of indirect calls by a third to a half.

   - Refactor the fsdax code to use iomap iterators instead of the
     open-coded iomap_apply code that it had before.

   - Format file range iomap tracepoint data in hexadecimal and
     standardize the names used in the pretty-print string"

* tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (41 commits)
  iomap: standardize tracepoint formatting and storage
  mm/swap: consider max pages in iomap_swapfile_add_extent
  iomap: move loop control code to iter.c
  iomap: constify iomap_iter_srcmap
  fsdax: switch the fault handlers to use iomap_iter
  fsdax: factor out a dax_fault_actor() helper
  fsdax: factor out helpers to simplify the dax fault code
  iomap: rework unshare flag
  iomap: pass an iomap_iter to various buffered I/O helpers
  iomap: remove iomap_apply
  fsdax: switch dax_iomap_rw to use iomap_iter
  iomap: switch iomap_swapfile_activate to use iomap_iter
  iomap: switch iomap_seek_data to use iomap_iter
  iomap: switch iomap_seek_hole to use iomap_iter
  iomap: switch iomap_bmap to use iomap_iter
  iomap: switch iomap_fiemap to use iomap_iter
  iomap: switch __iomap_dio_rw to use iomap_iter
  iomap: switch iomap_page_mkwrite to use iomap_iter
  iomap: switch iomap_zero_range to use iomap_iter
  iomap: switch iomap_file_unshare to use iomap_iter
  ...

Pull project quota update from Darrick Wong:
 "A single VFS patch that prevents userspace from setting project quota
  ids on files that the VFS considers invalid"

* tag 'vfs-5.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs: forbid invalid project ID

Pull nfsd updates from Chuck Lever:
 "New features:

   - Support for server-side disconnect injection via debugfs

   - Protocol definitions for new RPC_AUTH_TLS authentication flavor

  Performance improvements:

   - Reduce page allocator traffic in the NFSD splice read actor

   - Reduce CPU utilization in svcrdma's Send completion handler

  Notable bug fixes:

   - Stabilize lockd operation when re-exporting NFS mounts

   - Fix the use of %.*s in NFSD tracepoints

   - Fix /proc/sys/fs/nfs/nsm_use_hostnames"

* tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
  nfsd: fix crash on LOCKT on reexported NFSv3
  nfs: don't allow reexport reclaims
  lockd: don't attempt blocking locks on nfs reexports
  nfs: don't atempt blocking locks on nfs reexports
  Keep read and write fds with each nlm_file
  lockd: update nlm_lookup_file reexport comment
  nlm: minor refactoring
  nlm: minor nlm_lookup_file argument change
  lockd: lockd server-side shouldn't set fl_ops
  SUNRPC: Add documentation for the fail_sunrpc/ directory
  SUNRPC: Server-side disconnect injection
  SUNRPC: Move client-side disconnect injection
  SUNRPC: Add a /sys/kernel/debug/fail_sunrpc/ directory
  svcrdma: xpt_bc_xprt is already clear in __svc_rdma_free()
  nfsd4: Fix forced-expiry locking
  rpc: fix gss_svc_init cleanup on failure
  SUNRPC: Add RPC_AUTH_TLS protocol numbers
  lockd: change the proc_handler for nsm_use_hostnames
  sysctl: introduce new proc handler proc_dobool
  SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency()
  ...

Pull gfs2 updates from Andreas Gruenbacher:

 - Various withdraw related fixes (freeze glock recursion, thread
   initialization / destruction order, journal recovery, glock cleanup,
   withdraw under journal lock).

 - Some error message improvements.

 - Various minor cleanups.

* tag 'gfs2-v5.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Remove redundant check from gfs2_glock_dq
  gfs2: Delay withdraw from atomic context
  gfs2: Don't call dlm after protocol is unmounted
  gfs2: don't stop reads while withdraw in progress
  gfs2: Mark journal inodes as "don't cache"
  gfs2: nit: gfs2_drop_inode shouldn't return bool
  gfs2: Eliminate vestigial HIF_FIRST
  gfs2: Make recovery error more readable
  gfs2: Don't release and reacquire local statfs bh
  gfs2: init system threads before freeze lock
  gfs2: tiny cleanup in gfs2_log_reserve
  gfs2: trivial clean up of gfs2_ail_error
  gfs2: be more verbose replaying invalid rgrp blocks
  gfs2: Fix glock recursion in freeze_go_xmote_bh
  gfs2: Fix memory leak of object lsi on error return path

Pull fscrypt updates from Eric Biggers:
 "Some small fixes and cleanups for fs/crypto/:

   - Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
     st_size for encrypted symlinks

   - Use base64url instead of a custom Base64 variant

   - Document struct fscrypt_operations"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: document struct fscrypt_operations
  fscrypt: align Base64 encoding with RFC 4648 base64url
  fscrypt: remove mention of symlink st_size quirk from documentation
  ubifs: report correct st_size for encrypted symlinks
  f2fs: report correct st_size for encrypted symlinks
  ext4: report correct st_size for encrypted symlinks
  fscrypt: add fscrypt_symlink_getattr() for computing st_size

Pull btrfs updates from David Sterba:
 "The highlights of this round are integrations with fs-verity and
  idmapped mounts, the rest is usual mix of minor improvements, speedups
  and cleanups.

  There are some patches outside of btrfs, namely updating some VFS
  interfaces, all straightforward and acked.

  Features:

   - fs-verity support, using standard ioctls, backward compatible with
     read-only limitation on inodes with previously enabled fs-verity

   - idmapped mount support

   - make mount with rescue=ibadroots more tolerant to partially damaged
     trees

   - allow raid0 on a single device and raid10 on two devices,
     degenerate cases but might be useful as an intermediate step during
     conversion to other profiles

   - zoned mode block group auto reclaim can be disabled via sysfs knob

  Performance improvements:

   - continue readahead of node siblings even if target node is in
     memory, could speed up full send (on sample test +11%)

   - batching of delayed items can speed up creating many files

   - fsync/tree-log speedups
       - avoid unnecessary work (gains +2% throughput, -2% run time on
         sample load)
       - reduced lock contention on renames (on dbench +4% throughput,
         up to -30% latency)

  Fixes:

   - various zoned mode fixes

   - preemptive flushing threshold tuning, avoid excessive work on
     almost full filesystems

  Core:

   - continued subpage support, preparation for implementing remaining
     features like compression and defragmentation; with some
     limitations, write is now enabled on 64K page systems with 4K
     sectors, still considered experimental
       - no readahead on compressed reads
       - inline extents disabled
       - disabled raid56 profile conversion and mount

   - improved flushing logic, fixing early ENOSPC on some workloads

   - inode flags have been internally split to read-only and read-write
     incompat bit parts, used by fs-verity

   - new tree items for fs-verity
       - descriptor item
       - Merkle tree item

   - inode operations extended to be namespace-aware

   - cleanups and refactoring

  Generic code changes:

   - fs: new export filemap_fdatawrite_wbc

   - fs: removed sync_inode

   - block: bio_trim argument type fixups

   - vfs: add namespace-aware lookup"

* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
  btrfs: reset replace target device to allocation state on close
  btrfs: zoned: fix ordered extent boundary calculation
  btrfs: do not do preemptive flushing if the majority is global rsv
  btrfs: reduce the preemptive flushing threshold to 90%
  btrfs: tree-log: check btrfs_lookup_data_extent return value
  btrfs: avoid unnecessarily logging directories that had no changes
  btrfs: allow idmapped mount
  btrfs: handle ACLs on idmapped mounts
  btrfs: allow idmapped INO_LOOKUP_USER ioctl
  btrfs: allow idmapped SUBVOL_SETFLAGS ioctl
  btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls
  btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids
  btrfs: allow idmapped SNAP_DESTROY ioctls
  btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls
  btrfs: check whether fsgid/fsuid are mapped during subvolume creation
  btrfs: allow idmapped permission inode op
  btrfs: allow idmapped setattr inode op
  btrfs: allow idmapped tmpfile inode op
  btrfs: allow idmapped symlink inode op
  btrfs: allow idmapped mkdir inode op
  ...

Pull cifs client updates from Steve French:
 "Eleven cifs/smb3 client fixes:

   - mostly restructuring to allow disabling less secure algorithms
     (this will allow eventual removing rc4 and md4 from general use in
     the kernel)

   - four fixes, including two for stable

   - enable r/w support with fscache and cifs.ko

  I am working on a larger set of changes (the usual ... multichannel,
  auth and signing improvements), but wanted to get these in earlier to
  reduce chance of merge conflicts later in the merge window"

* tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Do not leak EDEADLK to dgetents64 for STATUS_USER_SESSION_DELETED
  cifs: add cifs_common directory to MAINTAINERS file
  cifs: cifs_md4 convert to SPDX identifier
  cifs: create a MD4 module and switch cifs.ko to use it
  cifs: fork arc4 and create a separate module for it for cifs and other users
  cifs: remove support for NTLM and weaker authentication algorithms
  cifs: enable fscache usage even for files opened as rw
  oid_registry: Add OIDs for missing Spnego auth mechanisms to Macs
  smb3: fix posix extensions mount option
  cifs: fix wrong release in sess_alloc_buffer() failed path
  CIFS: Fix a potencially linear read overflow

Pull initial ksmbd implementation from Steve French:
 "Initial merge of kernel smb3 file server, ksmbd.

  The SMB family of protocols is the most widely deployed network
  filesystem protocol, the default on Windows and Macs (and even on many
  phones and tablets), with clients and servers on all major operating
  systems, but lacked a kernel server for Linux. For many cases the
  current userspace server choices were suboptimal either due to memory
  footprint, performance or difficulty integrating well with advanced
  Linux features.

  ksmbd is a new kernel module which implements the server-side of the
  SMB3 protocol. The target is to provide optimized performance, GPLv2
  SMB server, and better lease handling (distributed caching). The
  bigger goal is to add new features more rapidly (e.g. RDMA aka
  "smbdirect", and recent encryption and signing improvements to the
  protocol) which are easier to develop on a smaller, more tightly
  optimized kernel server than for example in Samba.

  The Samba project is much broader in scope (tools, security services,
  LDAP, Active Directory Domain Controller, and a cross platform file
  server for a wider variety of purposes) but the user space file server
  portion of Samba has proved hard to optimize for some Linux workloads,
  including for smaller devices.

  This is not meant to replace Samba, but rather be an extension to
  allow better optimizing for Linux, and will continue to integrate well
  with Samba user space tools and libraries where appropriate. Working
  with the Samba team we have already made sure that the configuration
  files and xattrs are in a compatible format between the kernel and
  user space server.

  Various types of functional and regression tests are regularly run
  against it. One example is the automated 'buildbot' regression tests
  which use the Linux client to test against ksmbd, e.g.

     http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com/#/builders/8/builds/56

  but other test suites, including Samba's smbtorture functional test
  suite are also used regularly"

* tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd: (219 commits)
  ksmbd: fix __write_overflow warning in ndr_read_string
  MAINTAINERS: ksmbd: add cifs_common directory to ksmbd entry
  MAINTAINERS: ksmbd: update my email address
  ksmbd: fix permission check issue on chown and chmod
  ksmbd: don't set FILE DELETE and FILE_DELETE_CHILD in access mask by default
  MAINTAINERS: add git adddress of ksmbd
  ksmbd: update SMB3 multi-channel support in ksmbd.rst
  ksmbd: smbd: fix kernel oops during server shutdown
  ksmbd: remove select FS_POSIX_ACL in Kconfig
  ksmbd: use proper errno instead of -1 in smb2_get_ksmbd_tcon()
  ksmbd: update the comment for smb2_get_ksmbd_tcon()
  ksmbd: change int data type to boolean
  ksmbd: Fix multi-protocol negotiation
  ksmbd: fix an oops in error handling in smb2_open()
  ksmbd: add ipv6_addr_v4mapped check to know if connection from client is ipv4
  ksmbd: fix missing error code in smb2_lock
  ksmbd: use channel signingkey for binding SMB2 session setup
  ksmbd: don't set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
  ksmbd: Return STATUS_OBJECT_PATH_NOT_FOUND if smb2_creat() returns ENOENT
  ksmbd: fix -Wstringop-truncation warnings
  ...

Pull io_uring mkdirat/symlinkat/linkat support from Jens Axboe:
 "This adds io_uring support for mkdirat, symlinkat, and linkat"

* tag 'for-5.15/io_uring-vfs-2021-08-30' of git://git.kernel.dk/linux-block:
  io_uring: add support for IORING_OP_LINKAT
  io_uring: add support for IORING_OP_SYMLINKAT
  io_uring: add support for IORING_OP_MKDIRAT
  namei: update do_*() helpers to return ints
  namei: make do_linkat() take struct filename
  namei: add getname_uflags()
  namei: make do_symlinkat() take struct filename
  namei: make do_mknodat() take struct filename
  namei: make do_mkdirat() take struct filename
  namei: change filename_parentat() calling conventions
  namei: ignore ERR/NULL names in putname()

Pull support for struct bio recycling from Jens Axboe:
 "This adds bio recycling support for polled IO, allowing quick reuse of
  a bio for high IOPS scenarios via a percpu bio_set list.

  It's good for almost a 10% improvement in performance, bumping our
  per-core IO limit from ~3.2M IOPS to ~3.5M IOPS"

* tag 'io_uring-bio-cache.5-2021-08-30' of git://git.kernel.dk/linux-block:
  bio: improve kerneldoc documentation for bio_alloc_kiocb()
  block: provide bio_clear_hipri() helper
  block: use the percpu bio cache in __blkdev_direct_IO
  io_uring: enable use of bio alloc cache
  block: clear BIO_PERCPU_CACHE flag if polling isn't supported
  bio: add allocation cache abstraction
  fs: add kiocb alloc cache flag
  bio: optimize initialization of a bio

Pull io_uring updates from Jens Axboe:

 - cancellation cleanups (Hao, Pavel)

 - io-wq accounting cleanup (Hao)

 - io_uring submit locking fix (Hao)

 - io_uring link handling fixes (Hao)

 - fixed file improvements (wangyangbo, Pavel)

 - allow updates of linked timeouts like regular timeouts (Pavel)

 - IOPOLL fix (Pavel)

 - remove batched file get optimization (Pavel)

 - improve reference handling (Pavel)

 - IRQ task_work batching (Pavel)

 - allow pure fixed file, and add support for open/accept (Pavel)

 - GFP_ATOMIC RT kernel fix

 - multiple CQ ring waiter improvement

 - funnel IRQ completions through task_work

 - add support for limiting async workers explicitly

 - add different clocksource support for timeouts

 - io-wq wakeup race fix

 - lots of cleanups and improvement (Pavel et al)

* tag 'for-5.15/io_uring-2021-08-30' of git://git.kernel.dk/linux-block: (87 commits)
  io-wq: fix wakeup race when adding new work
  io-wq: wqe and worker locks no longer need to be IRQ safe
  io-wq: check max_worker limits if a worker transitions bound state
  io_uring: allow updating linked timeouts
  io_uring: keep ltimeouts in a list
  io_uring: support CLOCK_BOOTTIME/REALTIME for timeouts
  io-wq: provide a way to limit max number of workers
  io_uring: add build check for buf_index overflows
  io_uring: clarify io_req_task_cancel() locking
  io_uring: add task-refs-get helper
  io_uring: fix failed linkchain code logic
  io_uring: remove redundant req_set_fail()
  io_uring: don't free request to slab
  io_uring: accept directly into fixed file table
  io_uring: hand code io_accept() fd installing
  io_uring: openat directly into fixed fd table
  net: add accept helper not installing fd
  io_uring: fix io_try_cancel_userdata race for iowq
  io_uring: IRQ rw completion batching
  io_uring: batch task work locking
  ...

Pull libata updates from Jens Axboe:
 "libata changes for the 5.15 release:

   - NCQ priority improvements (Damien, Niklas)

   - coccinelle warning fix (Jing)

   - dwc_460ex phy fix (Andy)"

* tag 'for-5.15/libata-2021-08-30' of git://git.kernel.dk/linux-block:
  include:libata: fix boolreturn.cocci warnings
  docs: sysfs-block-device: document ncq_prio_supported
  docs: sysfs-block-device: improve ncq_prio_enable documentation
  libata: Introduce ncq_prio_supported sysfs sttribute
  libata: print feature list on device scan
  libata: fix ata_read_log_page() warning
  libata: cleanup NCQ priority handling
  libata: cleanup ata_dev_configure()
  libata: cleanup device sleep capability detection
  libata: simplify ata_scsi_rbuf_fill()
  libata: fix ata_host_start()
  ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()

Pull block driver updates from Jens Axboe:
 "Sitting on top of the core block changes, here are the driver changes
  for the 5.15 merge window:

   - NVMe updates via Christoph:
       - suspend improvements for devices with an HMB (Keith Busch)
       - handle double completions more gacefull (Sagi Grimberg)
       - cleanup the selects for the nvme core code a bit (Sagi Grimberg)
       - don't update queue count when failing to set io queues (Ruozhu Li)
       - various nvmet connect fixes (Amit Engel)
       - cleanup lightnvm leftovers (Keith Busch, me)
       - small cleanups (Colin Ian King, Hou Pu)
       - add tracing for the Set Features command (Hou Pu)
       - CMB sysfs cleanups (Keith Busch)
       - add a mutex_destroy call (Keith Busch)

   - remove lightnvm subsystem. It's served its purpose and ultimately
     led to zoned nvme support, we no longer need it (Christoph)

   - revert floppy O_NDELAY fix (Denis)

   - nbd fixes (Hou, Pavel, Baokun)

   - nbd locking fixes (Tetsuo)

   - nbd device removal fixes (Christoph)

   - raid10 rcu warning fix (Xiao)

   - raid1 write behind fix (Guoqing)

   - rnbd fixes (Gioh, Md Haris)

   - misc fixes (Colin)"

* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
  Revert "floppy: reintroduce O_NDELAY fix"
  raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
  md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
  nbd: remove nbd->destroy_complete
  nbd: only return usable devices from nbd_find_unused
  nbd: set nbd->index before releasing nbd_index_mutex
  nbd: prevent IDR lookups from finding partially initialized devices
  nbd: reset NBD to NULL when restarting in nbd_genl_connect
  nbd: add missing locking to the nbd_dev_add error path
  nvme: remove the unused NVME_NS_* enum
  nvme: remove nvm_ndev from ns
  nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
  block: nbd: add sanity check for first_minor
  nvmet: check that host sqsize does not exceed ctrl MQES
  nvmet: avoid duplicate qid in connect cmd
  nvmet: pass back cntlid on successful completion
  nvme-rdma: don't update queue count when failing to set io queues
  nvme-tcp: don't update queue count when failing to set io queues
  nvme-tcp: pair send_mutex init with destroy
  nvme: allow user toggling hmb usage
  ...

Pull block updates from Jens Axboe:
 "Nothing major in here - lots of good cleanups and tech debt handling,
  which is also evident in the diffstats. In particular:

   - Add disk sequence numbers (Matteo)

   - Discard merge fix (Ming)

   - Relax disk zoned reporting restrictions (Niklas)

   - Bio error handling zoned leak fix (Pavel)

   - Start of proper add_disk() error handling (Luis, Christoph)

   - blk crypto fix (Eric)

   - Non-standard GPT location support (Dmitry)

   - IO priority improvements and cleanups (Damien)o

   - blk-throtl improvements (Chunguang)

   - diskstats_show() stack reduction (Abd-Alrhman)

   - Loop scheduler selection (Bart)

   - Switch block layer to use kmap_local_page() (Christoph)

   - Remove obsolete disk_name helper (Christoph)

   - block_device refcounting improvements (Christoph)

   - Ensure gendisk always has a request queue reference (Christoph)

   - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"

* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
  sg: pass the device name to blk_trace_setup
  block, bfq: cleanup the repeated declaration
  blk-crypto: fix check for too-large dun_bytes
  blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
  blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
  block: mark blkdev_fsync static
  block: refine the disk_live check in del_gendisk
  mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
  mmc: block: Support alternative_gpt_sector() operation
  partitions/efi: Support non-standard GPT location
  block: Add alternative_gpt_sector() operation
  bio: fix page leak bio_add_hw_page failure
  block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
  block: remove a pointless call to MINOR() in device_add_disk
  null_blk: add error handling support for add_disk()
  virtio_blk: add error handling support for add_disk()
  block: add error handling for device_add_disk / add_disk
  block: return errors from disk_alloc_events
  block: return errors from blk_integrity_add
  block: call blk_register_queue earlier in device_add_disk
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for timekeeping, timers and related drivers:

  Core code:

   - Cure a couple of correctness issues in the posix CPU timer code to
     prevent that the tick dependency for NOHZ full is kept alive for no
     reason.

   - Avoid expensive double reprogramming of the clockevent device in
     hrtimer_start_range_ns().

   - Avoid pointless SMP function calls when the clock was set to avoid
     disturbing CPUs which do not have any affected timers queued.

   - Make the clocksource watchdog test work correctly when CONFIG_HZ is
     less than 100.

  Drivers:

   - Prefer the ARM architected timer over the Exynos timer which is way
     more expensive to access.

   - Add device tree bindings for new Ingenic SoCs

   - The usual improvements and cleanups all over the place"

* tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  clocksource: Make clocksource watchdog test safe for slow-HZ systems
  dt-bindings: timer: Add ABIs for new Ingenic SoCs
  clocksource/drivers/fttmr010: Pass around less pointers
  clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdown
  clocksource/drivers/ingenic: Use bitfield macro helpers
  clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
  dt-bindings: timer: convert rockchip,rk-timer.txt to YAML
  clocksource/drivers/exynos_mct: Mark MCT device as CLOCK_EVT_FEAT_PERCPU
  clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64
  hrtimer: Unbreak hrtimer_force_reprogram()
  hrtimer: Use raw_cpu_ptr() in clock_was_set()
  hrtimer: Avoid more SMP function calls in clock_was_set()
  hrtimer: Avoid unnecessary SMP function calls in clock_was_set()
  hrtimer: Add bases argument to clock_was_set()
  time/timekeeping: Avoid invoking clock_was_set() twice
  timekeeping: Distangle resume and clock-was-set events
  timerfd: Provide timerfd_resume()
  hrtimer: Force clock_was_set() handling for the HIGHRES=n, NOHZ=y case
  hrtimer: Ensure timerfd notification for HIGHRES=n
  hrtimer: Consolidate reprogramming code
  ...

Pull misc x86 updates from Thomas Gleixner:
 "A set of updates for the x86 reboot code:

   - Limit the Dell Optiplex 990 quirk to early BIOS versions to avoid
     the full 'power cycle' alike reboot which is required for the buggy
     BIOSes.

   - Update documentation for the reboot=pci command line option and
     document how DMI platform quirks can be overridden"

* tag 'x86-misc-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions
  x86/reboot: Document how to override DMI platform quirks
  x86/reboot: Document the "reboot=pci" option

Pull x86 PIRQ updates from Thomas Gleixner:
 "A set of updates to support port 0x22/0x23 based PCI configuration
  space which can be found on various ALi chipsets and is also available
  on older Intel systems which expose a PIRQ router.

  While the Intel support is more or less nostalgia, the ALi chips are
  still in use on popular embedded boards used for routers"

* tag 'x86-irq-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix typo s/ECLR/ELCR/ for the PIC register
  x86: Avoid magic number with ELCR register accesses
  x86/PCI: Add support for the Intel 82426EX PIRQ router
  x86/PCI: Add support for the Intel 82374EB/82374SB (ESC) PIRQ router
  x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router
  x86: Add support for 0x22/0x23 port I/O configuration space

Pull x86 cache flush updates from Thomas Gleixner:
 "A reworked version of the opt-in L1D flush mechanism.

  This is a stop gap for potential future speculation related hardware
  vulnerabilities and a mechanism for truly security paranoid
  applications.

  It allows a task to request that the L1D cache is flushed when the
  kernel switches to a different mm. This can be requested via prctl().

  Changes vs the previous versions:

   - Get rid of the software flush fallback

   - Make the handling consistent with other mitigations

   - Kill the task when it ends up on a SMT enabled core which defeats
     the purpose of L1D flushing obviously"

* tag 'x86-cpu-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: Add L1D flushing Documentation
  x86, prctl: Hook L1D flushing in via prctl
  x86/mm: Prepare for opt-in based L1D flush in switch_mm()
  x86/process: Make room for TIF_SPEC_L1D_FLUSH
  sched: Add task_work callback for paranoid L1D flush
  x86/mm: Refactor cond_ibpb() to support other use cases
  x86/smp: Add a per-cpu view of SMT state

Pull irq updates from Thomas Gleixner:
 "Updates to the interrupt core and driver subsystems:

  Core changes:

   - The usual set of small fixes and improvements all over the place,
     but nothing stands out

  MSI changes:

   - Further consolidation of the PCI/MSI interrupt chip code

   - Make MSI sysfs code independent of PCI/MSI and expose the MSI
     interrupts of platform devices in the same way as PCI exposes them.

  Driver changes:

   - Support for ARM GICv3 EPPI partitions

   - Treewide conversion to generic_handle_domain_irq() for all chained
     interrupt controllers

   - Conversion to bitmap_zalloc() throughout the irq chip drivers

   - The usual set of small fixes and improvements"

* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  platform-msi: Add ABI to show msi_irqs of platform devices
  genirq/msi: Move MSI sysfs handling from PCI to MSI core
  genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
  irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
  irqdomain: Export irq_domain_disconnect_hierarchy()
  irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
  irqchip/apple-aic: Fix irq_disable from within irq handlers
  pinctrl/rockchip: drop the gpio related codes
  gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
  gpio/rockchip: support next version gpio controller
  gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
  gpio/rockchip: add driver for rockchip gpio
  dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  pinctrl/rockchip: add pinctrl device to gpio bank struct
  pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
  pinctrl/rockchip: always enable clock for gpio controller
  genirq: Fix kernel doc indentation
  EDAC/altera: Convert to generic_handle_domain_irq()
  powerpc: Bulk conversion to generic_handle_domain_irq()
  nios2: Bulk conversion to generic_handle_domain_irq()
  ...

Pull locking and atomics updates from Thomas Gleixner:
 "The regular pile:

   - A few improvements to the mutex code

   - Documentation updates for atomics to clarify the difference between
     cmpxchg() and try_cmpxchg() and to explain the forward progress
     expectations.

   - Simplification of the atomics fallback generator

   - The addition of arch_atomic_long*() variants and generic arch_*()
     bitops based on them.

   - Add the missing might_sleep() invocations to the down*() operations
     of semaphores.

  The PREEMPT_RT locking core:

   - Scheduler updates to support the state preserving mechanism for
     'sleeping' spin- and rwlocks on RT.

     This mechanism is carefully preserving the state of the task when
     blocking on a 'sleeping' spin- or rwlock and takes regular wake-ups
     targeted at the same task into account. The preserved or updated
     (via a regular wakeup) state is restored when the lock has been
     acquired.

   - Restructuring of the rtmutex code so it can be utilized and
     extended for the RT specific lock variants.

   - Restructuring of the ww_mutex code to allow sharing of the ww_mutex
     specific functionality for rtmutex based ww_mutexes.

   - Header file disentangling to allow substitution of the regular lock
     implementations with the PREEMPT_RT variants without creating an
     unmaintainable #ifdef mess.

   - Shared base code for the PREEMPT_RT specific rw_semaphore and
     rwlock implementations.

     Contrary to the regular rw_semaphores and rwlocks the PREEMPT_RT
     implementation is writer unfair because it is infeasible to do
     priority inheritance on multiple readers. Experience over the years
     has shown that real-time workloads are not the typical workloads
     which are sensitive to writer starvation.

     The alternative solution would be to allow only a single reader
     which has been tried and discarded as it is a major bottleneck
     especially for mmap_sem. Aside of that many of the writer
     starvation critical usage sites have been converted to a writer
     side mutex/spinlock and RCU read side protections in the past
     decade so that the issue is less prominent than it used to be.

   - The actual rtmutex based lock substitutions for PREEMPT_RT enabled
     kernels which affect mutex, ww_mutex, rw_semaphore, spinlock_t and
     rwlock_t. The spin/rw_lock*() functions disable migration across
     the critical section to preserve the existing semantics vs per-CPU
     variables.

   - Rework of the futex REQUEUE_PI mechanism to handle the case of
     early wake-ups which interleave with a re-queue operation to
     prevent the situation that a task would be blocked on both the
     rtmutex associated to the outer futex and the rtmutex based hash
     bucket spinlock.

     While this situation cannot happen on !RT enabled kernels the
     changes make the underlying concurrency problems easier to
     understand in general. As a result the difference between !RT and
     RT kernels is reduced to the handling of waiting for the critical
     section. !RT kernels simply spin-wait as before and RT kernels
     utilize rcu_wait().

   - The substitution of local_lock for PREEMPT_RT with a spinlock which
     protects the critical section while staying preemptible. The CPU
     locality is established by disabling migration.

  The underlying concepts of this code have been in use in PREEMPT_RT for
  way more than a decade. The code has been refactored several times over
  the years and this final incarnation has been optimized once again to be
  as non-intrusive as possible, i.e. the RT specific parts are mostly
  isolated.

  It has been extensively tested in the 5.14-rt patch series and it has
  been verified that !RT kernels are not affected by these changes"

* tag 'locking-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (92 commits)
  locking/rtmutex: Return success on deadlock for ww_mutex waiters
  locking/rtmutex: Prevent spurious EDEADLK return caused by ww_mutexes
  locking/rtmutex: Dequeue waiter on ww_mutex deadlock
  locking/rtmutex: Dont dereference waiter lockless
  locking/semaphore: Add might_sleep() to down_*() family
  locking/ww_mutex: Initialize waiter.ww_ctx properly
  static_call: Update API documentation
  locking/local_lock: Add PREEMPT_RT support
  locking/spinlock/rt: Prepare for RT local_lock
  locking/rtmutex: Add adaptive spinwait mechanism
  locking/rtmutex: Implement equal priority lock stealing
  preempt: Adjust PREEMPT_LOCK_OFFSET for RT
  locking/rtmutex: Prevent lockdep false positive with PI futexes
  futex: Prevent requeue_pi() lock nesting issue on RT
  futex: Simplify handle_early_requeue_pi_wakeup()
  futex: Reorder sanity checks in futex_requeue()
  futex: Clarify comment in futex_requeue()
  futex: Restructure futex_requeue()
  futex: Correct the number of requeued waiters for PI
  futex: Remove bogus condition for requeue PI
  ...

Pull SMP core updates from Thomas Gleixner:

 - Replace get/put_online_cpus() in various places. The final removal
   will happen shortly before v5.15-rc1 when the rest of the patches
   have been merged.

 - Add debug code to help the analysis of CPU hotplug failures

 - A set of kernel doc updates

* tag 'smp-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm: Replace deprecated CPU-hotplug functions.
  md/raid5: Replace deprecated CPU-hotplug functions.
  Documentation: Replace deprecated CPU-hotplug functions.
  smp: Fix all kernel-doc warnings
  cpu/hotplug: Add debug printks for hotplug callback failures
  cpu/hotplug: Use DEVICE_ATTR_*() macro
  cpu/hotplug: Eliminate all kernel-doc warnings
  cpu/hotplug: Fix kernel doc warnings for __cpuhp_setup_state_cpuslocked()
  cpu/hotplug: Fix comment typo
  smpboot: Replace deprecated CPU-hotplug functions.

Pull debugobjects update from Thomas Gleixner:
 "A single commit for debugobjects to make them work on PREEMPT_RT by
  preventing object pool refill in atomic contexts"

* tag 'core-debugobjects-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Make them PREEMPT_RT aware

Pull EFI updates from Ingo Molnar:
 "A handful of EFI changes for this cycle:

   - EFI CPER parsing improvements

   - Don't take the address of efi_guid_t internal fields"

* tag 'efi-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: cper: check section header more appropriately
  efi: Don't use knowledge about efi_guid_t internals
  efi: cper: fix scnprintf() use in cper_mem_err_location()

Pull x86 perf event updates from Ingo Molnar:

 - Add support for Intel Sapphire Rapids server CPU uncore events

 - Allow the AMD uncore driver to be built as a module

 - Misc cleanups and fixes

* tag 'perf-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  perf/x86/amd/ibs: Add bitfield definitions in new <asm/amd-ibs.h> header
  perf/amd/uncore: Allow the driver to be built as a module
  x86/cpu: Add get_llc_id() helper function
  perf/amd/uncore: Clean up header use, use <linux/ include paths instead of <asm/
  perf/amd/uncore: Simplify code, use free_percpu()'s built-in check for NULL
  perf/hw_breakpoint: Replace deprecated CPU-hotplug functions
  perf/x86/intel: Replace deprecated CPU-hotplug functions
  perf/x86: Remove unused assignment to pointer 'e'
  perf/x86/intel/uncore: Fix IIO cleanup mapping procedure for SNR/ICX
  perf/x86/intel/uncore: Support IMC free-running counters on Sapphire Rapids server
  perf/x86/intel/uncore: Support IIO free-running counters on Sapphire Rapids server
  perf/x86/intel/uncore: Factor out snr_uncore_mmio_map()
  perf/x86/intel/uncore: Add alias PMU name
  perf/x86/intel/uncore: Add Sapphire Rapids server MDF support
  perf/x86/intel/uncore: Add Sapphire Rapids server M3UPI support
  perf/x86/intel/uncore: Add Sapphire Rapids server UPI support
  perf/x86/intel/uncore: Add Sapphire Rapids server M2M support
  perf/x86/intel/uncore: Add Sapphire Rapids server IMC support
  perf/x86/intel/uncore: Add Sapphire Rapids server PCU support
  perf/x86/intel/uncore: Add Sapphire Rapids server M2PCIe support
  ...

Pull scheduler updates from Ingo Molnar:

 - The biggest change in this cycle is scheduler support for asymmetric
   scheduling affinity, to support the execution of legacy 32-bit tasks
   on AArch32 systems that also have 64-bit-only CPUs.

   Architectures can fill in this functionality by defining their own
   task_cpu_possible_mask(p). When this is done, the scheduler will make
   sure the task will only be scheduled on CPUs that support it.

   (The actual arm64 specific changes are not part of this tree.)

   For other architectures there will be no change in functionality.

 - Add cgroup SCHED_IDLE support

 - Increase node-distance flexibility & delay determining it until a CPU
   is brought online. (This enables platforms where node distance isn't
   final until the CPU is only.)

 - Deadline scheduler enhancements & fixes

 - Misc fixes & cleanups.

* tag 'sched-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  eventfd: Make signal recursion protection a task bit
  sched/fair: Mark tg_is_idle() an inline in the !CONFIG_FAIR_GROUP_SCHED case
  sched: Introduce dl_task_check_affinity() to check proposed affinity
  sched: Allow task CPU affinity to be restricted on asymmetric systems
  sched: Split the guts of sched_setaffinity() into a helper function
  sched: Introduce task_struct::user_cpus_ptr to track requested affinity
  sched: Reject CPU affinity changes based on task_cpu_possible_mask()
  cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
  cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
  cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
  sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
  sched: Cgroup SCHED_IDLE support
  sched/topology: Skip updating masks for non-online nodes
  sched: Replace deprecated CPU-hotplug functions.
  sched: Skip priority checks with SCHED_FLAG_KEEP_PARAMS
  sched: Fix UCLAMP_FLAG_IDLE setting
  sched/deadline: Fix missing clock update in migrate_task_rq_dl()
  sched/fair: Avoid a second scan of target in select_idle_cpu
  sched/fair: Use prev instead of new target as recent_used_cpu
  sched: Don't report SCHED_FLAG_SUGOV in sched_getattr()
  ...

Pull x86 cleanups from Borislav Petkov:
 "The usual round of minor cleanups and fixes"

* tag 'x86_cleanups_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kaslr: Have process_mem_region() return a boolean
  x86/power: Fix kernel-doc warnings in cpu.c
  x86/mce/inject: Replace deprecated CPU-hotplug functions.
  x86/microcode: Replace deprecated CPU-hotplug functions.
  x86/mtrr: Replace deprecated CPU-hotplug functions.
  x86/mmiotrace: Replace deprecated CPU-hotplug functions.

Pull x86 resource control updates from Borislav Petkov:
 "A first round of changes towards splitting the arch-specific bits from
  the filesystem bits of resctrl, the ultimate goal being to support
  ARM's equivalent technology MPAM, with the same fs interface (James
  Morse)"

* tag 'x86_cache_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  x86/resctrl: Make resctrl_arch_get_config() return its value
  x86/resctrl: Merge the CDP resources
  x86/resctrl: Expand resctrl_arch_update_domains()'s msr_param range
  x86/resctrl: Remove rdt_cdp_peer_get()
  x86/resctrl: Merge the ctrl_val arrays
  x86/resctrl: Calculate the index from the configuration type
  x86/resctrl: Apply offset correction when config is staged
  x86/resctrl: Make ctrlval arrays the same size
  x86/resctrl: Pass configuration type to resctrl_arch_get_config()
  x86/resctrl: Add a helper to read a closid's configuration
  x86/resctrl: Rename update_domains() to resctrl_arch_update_domains()
  x86/resctrl: Allow different CODE/DATA configurations to be staged
  x86/resctrl: Group staged configuration into a separate struct
  x86/resctrl: Move the schemata names into struct resctrl_schema
  x86/resctrl: Add a helper to read/set the CDP configuration
  x86/resctrl: Swizzle rdt_resource and resctrl_schema in pseudo_lock_region
  x86/resctrl: Pass the schema to resctrl filesystem functions
  x86/resctrl: Add resctrl_arch_get_num_closid()
  x86/resctrl: Store the effective num_closid in the schema
  x86/resctrl: Walk the resctrl schema list instead of an arch list
  ...

Pull x86 build updates from Borislav Petkov:

 - Remove cc-option checks which are old and already supported by the
   minimal compiler version the kernel uses and thus avoid the need to
   invoke the compiler unnecessarily.

 - Cleanups

* tag 'x86_build_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Move the install rule to arch/x86/Makefile
  x86/build: Remove the left-over bzlilo target
  x86/tools/relocs: Mark die() with the printf function attr format
  x86/build: Remove stale cc-option checks

Pull RAS update from Borislav Petkov:
 "A single RAS change for 5.15:

   - Do not start processing MCEs logged early because the decoding
     chain is not up yet - delay that processing until everything is
     ready"

* tag 'ras_core_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Defer processing of early errors

Pull EDAC updates from Borislav Petkov:
 "The usual EDAC stuff which managed to trickle in for 5.15:

   - Add new HBM2 (High Bandwidth Memory Gen 2) type and add support for
     it to the Intel SKx drivers

   - Print additional useful per-channel error information on i10nm,
     like on SKL

   - Don't load the AMD EDAC decoder in virtual images

   - The usual round of fixes and cleanups"

* tag 'edac_updates_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/i10nm: Retrieve and print retry_rd_err_log registers
  EDAC/i10nm: Fix NVDIMM detection
  EDAC/skx_common: Set the memory type correctly for HBM memory
  EDAC/altera: Skip defining unused structures for specific configs
  EDAC/mce_amd: Do not load edac_mce_amd module on guests
  EDAC/mc: Add new HBM2 memory type
  EDAC/amd64: Use DEVICE_ATTR helper macros

Pull s390 updates from Heiko Carstens:

 - Improve ftrace code patching so that stop_machine is not required
   anymore. This requires a small common code patch acked by Steven
   Rostedt:

     https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/

 - Enable KCSAN for s390. This comes with a small common code change to
   fix a compile warning. Acked by Marco Elver:

     https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com

 - Add KFENCE support for s390. This also comes with a minimal x86 patch
   from Marco Elver who said also this can be carried via the s390 tree:

     https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/

 - More changes to prepare the decompressor for relocation.

 - Enable DAT also for CPU restart path.

 - Final set of register asm removal patches; leaving only three
   locations where needed and sane.

 - Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO
   support to hwcaps flags.

 - Cleanup hwcaps implementation.

 - Add new instructions to in-kernel disassembler.

 - Various QDIO cleanups.

 - Add SCLP debug feature.

 - Various other cleanups and improvements all over the place.

* tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (105 commits)
  s390: remove SCHED_CORE from defconfigs
  s390/smp: do not use nodat_stack for secondary CPU start
  s390/smp: enable DAT before CPU restart callback is called
  s390: update defconfigs
  s390/ap: fix state machine hang after failure to enable irq
  KVM: s390: generate kvm hypercall functions
  s390/sclp: add tracing of SCLP interactions
  s390/debug: add early tracing support
  s390/debug: fix debug area life cycle
  s390/debug: keep debug data on resize
  s390/diag: make restart_part2 a local label
  s390/mm,pageattr: fix walk_pte_level() early exit
  s390: fix typo in linker script
  s390: remove do_signal() prototype and do_notify_resume() function
  s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.c
  s390/pci: improve DMA translation init and exit
  s390/pci: simplify CLP List PCI handling
  s390/pci: handle FH state mismatch only on disable
  s390/pci: fix misleading rc in clp_set_pci_fn()
  s390/boot: factor out offset_vmlinux_info() function
  ...

Pull m68k updates from Geert Uytterhoeven:

 - miscellaneous fixes

 - defconfig updates

* tag 'm68k-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix asm register constraints for atomic ops
  m68k: Fix invalid RMW_INSNS on CPUs that lack CAS
  m68k: defconfig: Update defconfigs for v5.14-rc1
  m68k: emu: Fix invalid free in nfeth_cleanup()

Pull crypto updates from Herbert Xu:
 "Algorithms:

   - Add AES-NI/AVX/x86_64 implementation of SM4.

  Drivers:

   - Add Arm SMCCC TRNG based driver"

[ And obviously a lot of random fixes and updates  - Linus]

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (84 commits)
  crypto: sha512 - remove imaginary and mystifying clearing of variables
  crypto: aesni - xts_crypt() return if walk.nbytes is 0
  padata: Remove repeated verbose license text
  crypto: ccp - Add support for new CCP/PSP device ID
  crypto: x86/sm4 - add AES-NI/AVX2/x86_64 implementation
  crypto: x86/sm4 - export reusable AESNI/AVX functions
  crypto: rmd320 - remove rmd320 in Makefile
  crypto: skcipher - in_irq() cleanup
  crypto: hisilicon - check _PS0 and _PR0 method
  crypto: hisilicon - change parameter passing of debugfs function
  crypto: hisilicon - support runtime PM for accelerator device
  crypto: hisilicon - add runtime PM ops
  crypto: hisilicon - using 'debugfs_create_file' instead of 'debugfs_create_regset32'
  crypto: tcrypt - add GCM/CCM mode test for SM4 algorithm
  crypto: testmgr - Add GCM/CCM mode test of SM4 algorithm
  crypto: tcrypt - Fix missing return value check
  crypto: hisilicon/sec - modify the hardware endian configuration
  crypto: hisilicon/sec - fix the abnormal exiting process
  crypto: qat - store vf.compatible flag
  crypto: qat - do not export adf_iov_putmsg()
  ...

Merge branch 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:
 "RCU changes for this cycle were:

   - Documentation updates

   - Miscellaneous fixes

   - Offloaded-callbacks updates

   - Updates to the nolibc library

   - Tasks-RCU updates

   - In-kernel torture-test updates

   - Torture-test scripting, perhaps most notably the pinning of
     torture-test guest OSes so as to force differences in memory
     latency. For example, in a two-socket system, a four-CPU guest OS
     will have one pair of its CPUs pinned to threads in a single core
     on one socket and the other pair pinned to threads in a single core
     on the other socket. This approach proved able to force race
     conditions that earlier testing missed. Some of these race
     conditions are still being tracked down"

* 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
  torture: Replace deprecated CPU-hotplug functions.
  rcu: Replace deprecated CPU-hotplug functions
  rcu: Print human-readable message for schedule() in RCU reader
  rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU
  rcu: Use per_cpu_ptr to get the pointer of per_cpu variable
  rcu: Remove useless "ret" update in rcu_gp_fqs_loop()
  rcu: Mark accesses in tree_stall.h
  rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack
  rcu: Mark lockless ->qsmask read in rcu_check_boost_fail()
  srcutiny: Mark read-side data races
  rcu: Start timing stall repetitions after warning complete
  rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()
  rcu/tree: Handle VM stoppage in stall detection
  rculist: Unify documentation about missing list_empty_rcu()
  rcu: Mark accesses to ->rcu_read_lock_nesting
  rcu: Weaken ->dynticks accesses and updates
  rcu: Remove special bit at the bottom of the ->dynticks counter
  rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock
  rcu: Fix to include first blocked task in stall warning
  torture: Make kvm-test-1-run-qemu.sh check for reboot loops
  ...

Pull file locking updates from Jeff Layton:
 "This starts with a couple of fixes for potential deadlocks in the
  fowner/fasync handling.

  The next patch removes the old mandatory locking code from the kernel
  altogether.

  The last patch cleans up rw_verify_area a bit more after the mandatory
  locking removal"

* tag 'locks-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: clean up after mandatory file locking support removal
  fs: remove mandatory file locking support
  fcntl: fix potential deadlock for &fasync_struct.fa_lock
  fcntl: fix potential deadlocks for &fown_struct.lock

Pull tpm driver updates from Jarkko Sakkinen:
 "The highlights are:

   - Support for signing LKM's with ECDSA keys

   - An integer overflow bug fix in pkey"

* tag 'tpmdd-next-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  crypto: public_key: fix overflow during implicit conversion
  tpm: ibmvtpm: Avoid error message when process gets signal while waiting
  certs: Add support for using elliptic curve keys for signing modules
  certs: Trigger creation of RSA module signing key if it's not an RSA key
  char: tpm: cr50_i2c: convert to new probe interface
  char: tpm: Kconfig: remove bad i2c cr50 select

Pull power supply and reset updates from Sebastian Reichel:
 "Battery/charger related:
   - cros-peripheral-charger: new driver
   - mt6360-charger: new driver
   - simple-battery: support reading chemistry info
   - max17042-battery: add max77849 support
   - sbs-battery: add time_to_empty_now support
   - smb347-charger: prepare USB OTG support
   - rn5t618: add voltage_now support
   - axp288: cleanup & optimizations
   - max17042_battery: cleanups
   - ab8500: cleanups
   - misc minor cleanups and DT binding fixes

  reset related:
   - tps65086-restart: new driver
   - linkstation-poweroff: support NETGEAR ReadyNAS Duo v2"

* tag 'for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits)
  power: supply: core: Fix parsing of battery chemistry/technology
  power: supply: max17042_battery: log SOC threshold using debug log level
  power: supply: max17042_battery: more robust chip type checks
  power: supply: max17042_battery: fix typo in MAx17042_TOFF
  power: supply: max17042_battery: clean up MAX17055_V_empty
  power: supply: smb347-charger: Implement USB VBUS regulator
  power: supply: smb347-charger: Add missing pin control activation
  power: supply: smb347-charger: Utilize generic regmap caching
  power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe
  dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator
  power: reset: Add TPS65086 restart driver
  dt-bindings: power: supply: max17042: describe interrupt
  power: supply: max17042: remove duplicated STATUS bit defines
  power: supply: max17042: handle fails of reading status register
  power: supply: core: Parse battery chemistry/technology
  dt-bindings: power: Extend battery bindings with chemistry
  power: reset: linkstation-poweroff: add new device
  power: reset: linkstation-poweroff: prepare for new devices
  power: supply: bq24735: reorganize ChargeOption command macros
  power: supply: rn5t618: Add voltage_now property
  ...

Pull spi updates from Mark Brown:
 "A quiet release for SPI, some fixes and a couple of new drivers plus
  one small refactoring:

   - Move the chip select timing configuration from the controller to
     the device to allow a bit more flexibility

   - New drivers for Rockchip SFC and Spreadtrum ADI"

* tag 'spi-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
  spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible
  spi: add sprd ADI for sc9863 and ums512
  spi: Convert sprd ADI bindings to yaml
  spi: sprd: Add ADI r3 support
  spi: sprd: Fix the wrong WDG_LOAD_VAL
  spi: davinci: invoke chipselect callback
  spi: sprd: fill offset only to RD_CMD register for reading from slave device
  spi: sprd: Make sure offset not equal to slave address size
  spi: sprd: Pass offset instead of physical address to adi_read/_write()
  spi: rockchip-sfc: Fix assigned but never used return error codes
  spi: rockchip-sfc: Remove redundant IO operations
  spi: stm32: fix excluded_middle.cocci warnings
  spi: coldfire-qspi: Use clk_disable_unprepare in the remove function
  spi: tegra20-slink: remove spi_master_put() in tegra_slink_remove()
  spi: rockchip-sfc: add rockchip serial flash controller
  spi: rockchip-sfc: Bindings for Rockchip serial flash controller
  spi: orion: Prevent incorrect chip select behaviour
  spi: mxic: add missing braces
  spi: spi-pic32: Fix issue with uninitialized dma_slave_config
  spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config
  ...

Pull regulator updates from Mark Brown:
 "A very quiet releases, some fixes and cleanups but not really that
  many of them. There were a couple of new driver specific pieces:

   - Support for controlling the over/under voltage protection on
     BD718xx devices

   - New drivers for Richtek RTQ2134, and RTQ6752"

* tag 'regulator-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (37 commits)
  regulator: vctrl: Avoid lockdep warning in enable/disable ops
  regulator: vctrl: Use locked regulator_get_voltage in probe path
  regulator: Documentation fix for regulator error notification helper
  regulator: Minor regulator documentation fixes.
  regulator: sy7636a: Use the regmap directly
  regulator: sy7636a: Store the epd-pwr-good GPIO locally
  regulator: sy7636a: Use the parent driver data
  regulator: sy7636a: Remove the poll_enable_time
  regulator: sy8827n: Enable REGCACHE_FLAT
  regulator: sy8824x: Enable REGCACHE_FLAT
  regulator: rtq2134: Fix coding style
  regulator: hi6421v600: rename voltage range arrays
  regulator: hi6421v600: use lowercase for ldo
  regulator: fixed: use dev_err_probe for register
  regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC
  regulator: rtq2134: Add binding document for Richtek RTQ2134 SubPMIC
  regulator: Fix a couple of spelling mistakes in Kconfig
  regulator: rtq6752: fix reg reset behavior
  regulator: da9063: Add support for full-current mode.
  regulator: rt6245: make a const array func_base static, makes object smaller
  ...