- 26 Jul, 2019 40 commits
-
-
Daniel Jordan authored
commit cf144f81 upstream. Testing padata with the tcrypt module on a 5.2 kernel... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # modprobe tcrypt mode=211 sec=1 ...produces this splat: INFO: task modprobe:10075 blocked for more than 120 seconds. Not tainted 5.2.0-base+ #16 modprobe D 0 10075 10064 0x80004080 Call Trace: ? __schedule+0x4dd/0x610 ? ring_buffer_unlock_commit+0x23/0x100 schedule+0x6c/0x90 schedule_timeout+0x3b/0x320 ? trace_buffer_unlock_commit_regs+0x4f/0x1f0 wait_for_common+0x160/0x1a0 ? wake_up_q+0x80/0x80 { crypto_wait_req } # entries in braces added by hand { do_one_aead_op } { test_aead_jiffies } test_aead_speed.constprop.17+0x681/0xf30 [tcrypt] do_test+0x4053/0x6a2b [tcrypt] ? 0xffffffffa00f4000 tcrypt_mod_init+0x50/0x1000 [tcrypt] ... The second modprobe command never finishes because in padata_reorder, CPU0's load of reorder_objects is executed before the unlocking store in spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment: CPU0 CPU1 padata_reorder padata_do_serial LOAD reorder_objects // 0 INC reorder_objects // 1 padata_reorder TRYLOCK pd->lock // failed UNLOCK pd->lock CPU0 deletes the timer before returning from padata_reorder and since no other job is submitted to padata, modprobe waits indefinitely. Add a pair of full barriers to guarantee proper ordering: CPU0 CPU1 padata_reorder padata_do_serial UNLOCK pd->lock smp_mb() LOAD reorder_objects INC reorder_objects smp_mb__after_atomic() padata_reorder TRYLOCK pd->lock smp_mb__after_atomic is needed so the read part of the trylock operation comes after the INC, as Andrea points out. Thanks also to Andrea for help with writing a litmus test. Fixes: 16295bec ("padata: Generic parallelization/serialization interface") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: <stable@vger.kernel.org> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lyude Paul authored
commit 7cb95eee upstream. It turns out that while disabling i2c bus access from software when the GPU is suspended was a step in the right direction with: commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") We also ended up accidentally breaking the vbios init scripts on some older Tesla GPUs, as apparently said scripts can actually use the i2c bus. Since these scripts are executed before initializing any subdevices, we end up failing to acquire access to the i2c bus which has left a number of cards with their fan controllers uninitialized. Luckily this doesn't break hardware - it just means the fan gets stuck at 100%. This also means that we've always been using our i2c busses before initializing them during the init scripts for older GPUs, we just didn't notice it until we started preventing them from being used until init. It's pretty impressive this never caused us any issues before! So, fix this by initializing our i2c pad and busses during subdev pre-init. We skip initializing aux busses during pre-init, as those are guaranteed to only ever be used by nouveau for DP aux transactions. Signed-off-by:
Lyude Paul <lyude@redhat.com> Tested-by:
Marc Meledandri <m.meledandri@gmail.com> Fixes: 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
commit 8e2442a5 upstream. Since commit 00c864f8 ("kconfig: allow all config targets to write auto.conf if missing"), Kconfig creates include/config/auto.conf in the defconfig stage when it is missing. Joonas Kylmälä reported incorrect auto.conf generation under some circumstances. To reproduce it, apply the following diff: | --- a/arch/arm/configs/imx_v6_v7_defconfig | +++ b/arch/arm/configs/imx_v6_v7_defconfig | @@ -345,14 +345,7 @@ CONFIG_USB_CONFIGFS_F_MIDI=y | CONFIG_USB_CONFIGFS_F_HID=y | CONFIG_USB_CONFIGFS_F_UVC=y | CONFIG_USB_CONFIGFS_F_PRINTER=y | -CONFIG_USB_ZERO=m | -CONFIG_USB_AUDIO=m | -CONFIG_USB_ETH=m | -CONFIG_USB_G_NCM=m | -CONFIG_USB_GADGETFS=m | -CONFIG_USB_FUNCTIONFS=m | -CONFIG_USB_MASS_STORAGE=m | -CONFIG_USB_G_SERIAL=m | +CONFIG_USB_FUNCTIONFS=y | CONFIG_MMC=y | CONFIG_MMC_SDHCI=y | CONFIG_MMC_SDHCI_PLTFM=y And then, run: $ make ARCH=arm mrproper imx_v6_v7_defconfig You will see CONFIG_USB_FUNCTIONFS=y is correctly contained in the .config, but not in the auto.conf. Please note drivers/usb/gadget/legacy/Kconfig is included from a choice block in drivers/usb/gadget/Kconfig. So USB_FUNCTIONFS is a choice value. This is probably a similar situation described in commit beaaddb6 ("kconfig: tests: test defconfig when two choices interact"). When sym_calc_choice() is called, the choice symbol forgets the SYMBOL_DEF_USER unless all of its choice values are explicitly set by the user. The choice symbol is given just one chance to recall it because set_all_choice_values() is called if SYMBOL_NEED_SET_CHOICE_VALUES is set. When sym_calc_choice() is called again, the choice symbol forgets it forever, since SYMBOL_NEED_SET_CHOICE_VALUES is a one-time aid. Hence, we cannot call sym_clear_all_valid() again and again. It is crazy to repeat set and unset of internal flags. However, we cannot simply get rid of "sym->flags &= flags | ~SYMBOL_DEF_USER;" Doing so would re-introduce the problem solved by commit 5d09598d ("kconfig: fix new choices being skipped upon config update"). To work around the issue, conf_write_autoconf() stopped calling sym_clear_all_valid(). conf_write() must be changed accordingly. Currently, it clears SYMBOL_WRITE after the symbol is written into the .config file. This is needed to prevent it from writing the same symbol multiple times in case the symbol is declared in two or more locations. I added the new flag SYMBOL_WRITTEN, to track the symbols that have been written. Anyway, this is a cheesy workaround in order to suppress the issue as far as defconfig is concerned. Handling of choices is totally broken. sym_clear_all_valid() is called every time a user touches a symbol from the GUI interface. To reproduce it, just add a new symbol drivers/usb/gadget/legacy/Kconfig, then touch around unrelated symbols from menuconfig. USB_FUNCTIONFS will disappear from the .config file. I added the Fixes tag since it is more fatal than before. But, this has been broken since long long time before, and still it is. We should take a closer look to fix this correctly somehow. Fixes: 00c864f8 ("kconfig: allow all config targets to write auto.conf if missing") Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Reported-by:
Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by:
-
Radoslaw Burny authored
commit 5ec27ec7 upstream. Normally, the inode's i_uid/i_gid are translated relative to s_user_ns, but this is not a correct behavior for proc. Since sysctl permission check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more sense to use these values in u_[ug]id of proc inodes. In other words: although uid/gid in the inode is not read during test_perm, the inode logically belongs to the root of the namespace. I have confirmed this with Eric Biederman at LPC and in this thread: https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com Consequences ============ Since the i_[ug]id values of proc nodes are not used for permissions checks, this change usually makes no functional difference. However, it causes an issue in a setup where: * a namespace container is created without root user in container - hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID * container creator tries to configure it by writing /proc/sys files, e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit Kernel does not allow to open an inode for writing if its i_[ug]id are invalid, making it impossible to write shmmax and thus - configure the container. Using a container with no root mapping is apparently rare, but we do use this configuration at Google. Also, we use a generic tool to configure the container limits, and the inability to write any of them causes a failure. History ======= The invalid uids/gids in inodes first appeared due to 81754357 (fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns). However, AFAIK, this did not immediately cause any issues. The inability to write to these "invalid" inodes was only caused by a later commit 0bd23d09 (vfs: Don't modify inodes with a uid or gid unknown to the vfs). Tested: Used a repro program that creates a user namespace without any mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside. Before the change, it shows the overflow uid, with the change it's 0. The overflow uid indicates that the uid in the inode is not correct and thus it is not possible to open the file for writing. Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com Fixes: 0bd23d09 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs") Signed-off-by:
Radoslaw Burny <rburny@google.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jon Hunter authored
commit ba24eee6 upstream. The Tegra AGIC interrupt controller is an ARM GIC400 interrupt controller. Per the ARM GIC device-tree binding, the first address region is for the GIC distributor registers and the second address region is for the GIC CPU interface registers. The address space for the distributor registers is 4kB, but currently this is incorrectly defined as 8kB for the Tegra AGIC and overlaps with the CPU interface registers. Correct the address space for the distributor to be 4kB. Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Fixes: bcdbde43 ("arm64: tegra: Add AGIC node for Tegra210") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Like Xu authored
commit 6fc3977c upstream. If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sakari Ailus authored
commit 14f28f5c upstream. buf->size is an unsigned long; casting that to int will lead to an overflow if buf->size exceeds INT_MAX. Fix this by changing the type to unsigned long instead. This is possible as the buf->size is always aligned to PAGE_SIZE, and therefore the size will never have values lesser than 0. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Sakari Ailus authored
commit defcdc5d upstream. PAGE_ALIGN() may wrap the buffer size around to 0. Prevent this by checking that the aligned value is not smaller than the unaligned one. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
-
Ezequiel Garcia authored
commit 766b9b16 upstream. The mutex unlock in the threaded interrupt handler is not paired with any mutex lock. Remove it. This bug has been here for a really long time, so it applies to any stable repo. Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Boris Brezillon authored
commit 07d89227 upstream. cfg->type can be overridden by v4l2_ctrl_fill() and the new value is stored in the local type var. Fix the tests to use this local var. Fixes: 0996517c ("V4L/DVB: v4l2: Add new control handling framework") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> [hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)] Signed-off-by:
-
Hui Wang authored
commit 4b4e0e32 upstream. Without this patch, the headset-mic and headphone-mic don't work. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit fbc57129 upstream. It assigned to wrong model. So, The headphone Mic can't work. Fixes: 3f640970 ("ALSA: hda - Fix headset mic detection problem for several Dell laptops") Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit ede34f39 upstream. The fix for the racy writes and ioctls to sequencer widened the application of client->ioctl_mutex to the whole write loop. Although it does unlock/relock for the lengthy operation like the event dup, the loop keeps the ioctl_mutex for the whole time in other situations. This may take quite long time if the user-space would give a huge buffer, and this is a likely cause of some weird behavior spotted by syzcaller fuzzer. This patch puts a simple workaround, just adding a mutex break in the loop when a large number of events have been processed. This shouldn't hit any performance drop because the threshold is set high enough for usual operations. Fixes: 7bd80091 ("ALSA: seq: More protection for concurrent write and ioctl races") Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Xiao Ni authored
commit d9771f5e upstream. commit d5d885fd ("md: introduce new personality funciton start()") splits the init job to two parts. The first part run() does the jobs that do not require the md threads. The second part start() does the jobs that require the md threads. Now it just does run() in adding new journal device. It needs to do the second part start() too. Fixes: d5d885fd ("md: introduce new personality funciton start()") Cc: stable@vger.kernel.org #v4.9+ Reported-by:
Michal Soltys <soltys@ziu.info> Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Mark Brown authored
commit ceaea851 upstream. Back in ff9fb72b (debugfs: return error values, not NULL) the debugfs APIs were changed to return error pointers rather than NULL pointers on error, breaking the error checking in ASoC. Update the code to use IS_ERR() and log the codes that are returned as part of the error messages. Fixes: ff9fb72b (debugfs: return error values, not NULL) Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
commit aeb87246 upstream. All mapping iterator logic is based on the assumption that sg->offset is always lower than PAGE_SIZE. But there are situations where sg->offset is such that the SG item is on the second page. In that case sg_copy_to_buffer() fails properly copying the data into the buffer. One of the reason is that the data will be outside the kmapped area used to access that data. This patch fixes the issue by adjusting the mapping iterator offset and pgoffset fields such that offset is always lower than PAGE_SIZE. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 4225fc85 ("lib/scatterlist: use page iterator in the mapping iterator") Cc: stable@vger.kernel.org Signed-off-by:
-
Trond Myklebust authored
commit 58bbeab4 upstream. If the client has to stop in pnfs_update_layout() to wait for another layoutget to complete, it currently exits and defaults to I/O through the MDS if the layoutget was successful. Fixes: d03360aa ("pNFS: Ensure we return the error if someone kills...") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:
-
Trond Myklebust authored
commit 400417b0 upstream. We're supposed to wait for the outstanding layout count to go to zero, but that got lost somehow. Fixes: d03360aa ("pNFS: Ensure we return the error if someone...") Reported-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit 8e04fdfa upstream. mirror->mirror_ds can be NULL if uninitialised, but can contain a PTR_ERR() if call to GETDEVICEINFO failed. Fixes: 65990d1a ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET") Signed-off-by:
-
Trond Myklebust authored
commit 44942b4e upstream. According to the open() manpage, Linux reserves the access mode 3 to mean "check for read and write permission on the file and return a file descriptor that can't be used for reading or writing." Currently, the NFSv4 code will ask the server to open the file, and will use an incorrect share access mode of 0. Since it has an incorrect share access mode, the client later forgets to send a corresponding close, meaning it can leak stateids on the server. Fixes: ce4ef7c0 ("NFS: Split out NFS v4 file operations") Cc: stable@vger.kernel.org # 3.6+ Signed-off-by:
-
Emmanuel Grumbach authored
commit ed3e4c6d upstream. Newest devices have a new firmware load mechanism. This mechanism is called the context info. It means that the driver doesn't need to load the sections of the firmware. The driver rather prepares a place in DRAM, with pointers to the relevant sections of the firmware, and the firmware loads itself. At the end of the process, the firmware sends the ALIVE interrupt. This is different from the previous scheme in which the driver expected the FH_TX interrupt after each section being transferred over the DMA. In order to support this new flow, we enabled all the interrupts. This broke the assumption that we have in the code that the RF-Kill interrupt can't interrupt the firmware load flow. Change the context info flow to enable only the ALIVE interrupt, and re-enable all the other interrupts only after the firmware is alive. Then, we won't see the RF-Kill interrupt until then. Getting the RF-Kill interrupt while loading the firmware made us kill the firmware while it is loading and we ended up dumping garbage instead of the firmware state. Re-enable the ALIVE | RX interrupts from the ISR when we get the ALIVE interrupt to be able to get the RX interrupt that comes immediately afterwards for the ALIVE notification. This is needed for non MSI-X only. Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 0d53cfd0 upstream. iwl_mvm_send_cmd returns 0 when the command won't be sent because RF-Kill is asserted. Do the same when we call iwl_get_shared_mem_conf since it is not sent through iwl_mvm_send_cmd but directly calls the transport layer. Cc: stable@vger.kernel.org Signed-off-by:
-
Emmanuel Grumbach authored
commit ec46ae30 upstream. We added code to restock the buffer upon ALIVE interrupt when MSI-X is disabled. This was added as part of the context info code. This code was added only if the ISR debug level is set which is very unlikely to be related. Move this code to run even when the ISR debug level is not set. Note that gen2 devices work with MSI-X in most cases so that this path is seldom used. Cc: stable@vger.kernel.org Signed-off-by:
-
Emmanuel Grumbach authored
commit 3b57a10c upstream. Sometimes the register status can include interrupts that were masked. We can, for example, get the RF-Kill bit set in the interrupt status register although this interrupt was masked. Then if we get the ALIVE interrupt (for example) that was not masked, we need to *not* service the RF-Kill interrupt. Fix this in the MSI-X interrupt handler. Cc: stable@vger.kernel.org Signed-off-by:
-
Jon Hunter authored
commit ece6031e upstream. The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which not sufficient because the enable ramp delay has been measured to be greater than 1ms. Furthermore, the downstream kernels released by NVIDIA for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of 160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be 2ms and add a settling delay of 160us. Cc: stable@vger.kernel.org Signed-off-by:
-
Krzysztof Kozlowski authored
commit 16da0eb5 upstream. On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750 mV, not 600 mV. Using wrong minimal value caused shifting of these regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was reported as 1.2 V). On most of the boards these regulators are left in default state so this was only affecting reported voltage. However if any driver wanted to change them, then effectively it would set voltage 150 mV higher than intended. Cc: <stable@vger.kernel.org> Fixes: cb74685e ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Hui Wang authored
commit 771a081e upstream. In the function alps_is_cs19_trackpoint(), we check if the param[1] is in the 0x20~0x2f range, but the code we wrote for this checking is not correct: (param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f, it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f... Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20). Fixes: 7e4935cc ("Input: alps - don't handle ALPS cs19 trackpoint-only device") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Nick Black authored
commit 1976d7d2 upstream. Adds the Lenovo T580 to the SMBus intertouch list for Synaptics touchpads. I've tested with this for a week now, and it seems a great improvement. It's also nice to have the complaint gone from dmesg. Signed-off-by:
Nick Black <dankamongmen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Hui Wang authored
commit 7e4935cc upstream. On a latest Lenovo laptop, the trackpoint and 3 buttons below it don't work at all, when we move the trackpoint or press those 3 buttons, the kernel will print out: "Rejected trackstick packet from non DualPoint device" This device is identified as an alps touchpad but the packet has trackpoint format, so the alps.c drops the packet and prints out the message above. According to XiaoXiao's explanation, this device is named cs19 and is trackpoint-only device, its firmware is only for trackpoint, it is independent of touchpad and is a device completely different from DualPoint ones. To drive this device with mininal changes to the existing driver, we just let the alps driver not handle this device, then the trackpoint.c will be the driver of this device if the trackpoint driver is enabled. (if not, this device will fallback to a bare PS/2 device) With the trackpoint.c, this trackpoint and 3 buttons all work well, they have all features that the trackpoint should have, like scrolling-screen, drag-and-drop and frame-selection. Signed-off-by:
XiaoXiao Liu <sliuuxiaonxiao@gmail.com> Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Grant Hernandez authored
commit 2a017fd8 upstream. The GTCO tablet input driver configures itself from an HID report sent via USB during the initial enumeration process. Some debugging messages are generated during the parsing. A debugging message indentation counter is not bounds checked, leading to the ability for a specially crafted HID report to cause '-' and null bytes be written past the end of the indentation array. As long as the kernel has CONFIG_DYNAMIC_DEBUG enabled, this code will not be optimized out. This was discovered during code review after a previous syzkaller bug was found in this driver. Signed-off-by:
Grant Hernandez <granthernandez@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Coly Li authored
commit f54d801d upstream. Commit 9baf3097 ("bcache: fix for gc and write-back race") added a new work queue dc->writeback_write_wq, but forgot to destroy it in the error condition when creating dc->writeback_thread failed. This patch destroys dc->writeback_write_wq if kthread_create() returns error pointer to dc->writeback_thread, then a memory leak is avoided. Fixes: 9baf3097 ("bcache: fix for gc and write-back race") Signed-off-by:
Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Coly Li authored
commit 54619998 upstream. In bch_cached_dev_files[] from driver/md/bcache/sysfs.c, sysfs_errors is incorrectly inserted in. The correct entry should be sysfs_io_errors. This patch fixes the problem and now I/O errors of cached device can be read from /sys/block/bcache<N>/bcache/io_errors. Fixes: c7b7bd07 ("bcache: add io_disable to struct cached_dev") Signed-off-by:
-
Coly Li authored
commit 578df99b upstream. When md raid device (e.g. raid456) is used as backing device, read-ahead requests on a degrading and recovering md raid device might be failured immediately by md raid code, but indeed this md raid array can still be read or write for normal I/O requests. Therefore such failed read-ahead request are not real hardware failure. Further more, after degrading and recovering accomplished, read-ahead requests will be handled by md raid array again. For such condition, I/O failures of read-ahead requests don't indicate real health status (because normal I/O still be served), they should not be counted into I/O error counter dc->io_errors. Since there is no simple way to detect whether the backing divice is a md raid device, this patch simply ignores I/O failures for read-ahead bios on backing device, to avoid bogus backing device failure on a degrading md raid array. Suggested-and-tested-by:
Thorsten Knabe <linux@thorsten-knabe.de> Signed-off-by:
-
Coly Li authored
commit ba82c1ac upstream. This reverts commit 6268dc2c. This patch depends on commit c4dc2497 ("bcache: fix high CPU occupancy during journal") which is reverted in previous patch. So revert this one too. Fixes: 6268dc2c ("bcache: free heap cache_set->flush_btree in bch_journal_free") Signed-off-by:
-
Coly Li authored
commit 249a5f6d upstream. This reverts commit c4dc2497. This patch enlarges a race between normal btree flush code path and flush_btree_write(), which causes deadlock when journal space is exhausted. Reverts this patch makes the race window from 128 btree nodes to only 1 btree nodes. Fixes: c4dc2497 ("bcache: fix high CPU occupancy during journal") Signed-off-by:
-
Coly Li authored
commit 695277f1 upstream. This reverts commit 6147305c. Although this patch helps the failed bcache device to stop faster when too many I/O errors detected on corresponding cached device, setting CACHE_SET_IO_DISABLE bit to cache set c->flags was not a good idea. This operation will disable all I/Os on cache set, which means other attached bcache devices won't work neither. Without this patch, the failed bcache device can also be stopped eventually if internal I/O accomplished (e.g. writeback). Therefore here I revert it. Fixes: 6147305c ("bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error()") Reported-by:
Yong Li <mr.liyong@qq.com> Signed-off-by:
-
Wen Yang authored
commit 95566aa7 upstream. There is a possible double free issue in ppc4xx_trng_probe(): 85: dev->trng_base = of_iomap(trng, 0); 86: of_node_put(trng); ---> released here 87: if (!dev->trng_base) 88: goto err_out; ... 110: ierr_out: 111: of_node_put(trng); ---> double released here ... This issue was detected by using the Coccinelle software. We fix it by removing the unnecessary of_node_put(). Fixes: 5343e674 ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: <stable@vger.kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Allison Randal <allison@lohutok.net> Cc: Armijn Hemel <armijn@tjaldur.nl> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Cfir Cohen authored
commit 538a5a07 upstream. Avoid leaking GCM tag through timing side channel. Fixes: 36cf515b ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Cfir Cohen <cfir@google.com> Acked-by:
Gary R Hook <ghook@amd.com> Signed-off-by:
-
Hook, Gary authored
commit 20e833dc upstream. The AES GCM function reuses an 'op' data structure, which members contain values that must be cleared for each (re)use. This fix resolves a crypto self-test failure: alg: aead: gcm-aes-ccp encryption test failed (wrong result) on test vector 2, cfg="two even aligned splits" Fixes: 36cf515b ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Christian Lamparter authored
commit 0f7a8137 upstream. The hardware automatically zero pads incomplete block ciphers blocks without raising any errors. This is a screw-up. This was noticed by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS tests that sent a incomplete blocks and expect them to fail. This fixes: cbc-aes-ppc4xx encryption unexpectedly succeeded on test vector "random: len=2409 klen=32"; expected_error=-22, cfg="random: may_sleep use_digest src_divs=[96.90%@+2295, 2.34%@+4066, 0.32%@alignmask+12, 0.34%@+4087, 0.9%@alignmask+1787, 0.1%@+3767] iv_offset=6" ecb-aes-ppc4xx encryption unexpectedly succeeded on test vector "random: len=1011 klen=32"; expected_error=-22, cfg="random: may_sleep use_digest src_divs=[100.0%@alignmask+20] dst_divs=[3.12%@+3001, 96.88%@+4070]" Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org [4.19, 5.0 and 5.1] Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
