- 23 Aug, 2022 16 commits
-
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes This series includes 2 fixes for regressions introduced by the XDP multi-buffer feature, 1 devlink reload bug fix, and 1 SRIOV resource accounting bug fix. ==================== Link: https://lore.kernel.org/r/1661180814-19350-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vikas Gupta authored
LRO/GRO_HW should be disabled if there is an attached XDP program. BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW. Using BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be permanently disabled once they are disabled. Fixes: 1dc4c557 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
There are 2 issues: 1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs with the number of NQs assigned to the VFs. The IRQs are fixed on each function and cannot be re-assigned. Only the NQs are being assigned to the VFs. 2. vf_msix is the total number of NQs to be assigned to the VFs. So we should decrement vf_msix from hw_resc->max_nqs. Fixes: b16b6891 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by:
-
Vikas Gupta authored
Add missing devlink_set_features() API for callbacks reload_down and reload_up to function. Fixes: 228ea8c1 ("bnxt_en: implement devlink dev reload driver_reinit") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Pavan Chebbi authored
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not sufficient when running single buffer XDP programs doing redirect operations. The stack will complain on missing skb tail room. Fix it by using PAGE_SIZE when calling xdp_init_buff() for single buffer programs. Fixes: b231c3f3 ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Vladimir Oltean authored
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Leaving address learning enabled while ports are standalone breaks any kind of communication which involves port B receiving what port A has sent. Notably it breaks the ksz9477 driver used with a (non offloaded, ports act as if standalone) bonding interface in active-backup mode, when the ports are connected together through external switches, for redundancy purposes. This fixes a major design flaw in the ksz9477 and ksz8795 drivers, which unconditionally leave address learning enabled even while ports operate as standalone. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Link: https://lore.kernel.org/netdev/CAFZh4h-JVWt80CrQWkFji7tZJahMfOToUJQgKS5s0_=9zzpvYQ@mail.gmail.com/Reported-by:
Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220818164809.3198039-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
When a driver returns -EOPNOTSUPP in dsa_port_bridge_join() but failed to provide a reason for it, DSA attempts to set the extack to say that software fallback will kick in. The problem is, when we use brctl and the legacy bridge ioctls, the extack will be NULL, and DSA dereferences it in the process of setting it. Sergei Antonov proves this using the following stack trace: Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at dsa_slave_changeupper+0x5c/0x158 dsa_slave_changeupper from raw_notifier_call_chain+0x38/0x6c raw_notifier_call_chain from __netdev_upper_dev_link+0x198/0x3b4 __netdev_upper_dev_link from netdev_master_upper_dev_link+0x50/0x78 netdev_master_upper_dev_link from br_add_if+0x430/0x7f4 br_add_if from br_ioctl_stub+0x170/0x530 br_ioctl_stub from br_ioctl_call+0x54/0x7c br_ioctl_call from dev_ifsioc+0x4e0/0x6bc dev_ifsioc from dev_ioctl+0x2f8/0x758 dev_ioctl from sock_ioctl+0x5f0/0x674 sock_ioctl from sys_ioctl+0x518/0xe40 sys_ioctl from ret_fast_syscall+0x0/0x1c Fix the problem by only overriding the extack if non-NULL. Fixes: 1c6e8088 ("net: dsa: allow port_bridge_join() to override extack message") Link: https://lore.kernel.org/netdev/CABikg9wx7vB5eRDAYtvAm7fprJ09Ta27a4ZazC=NX5K4wn6pWA@mail.gmail.com/Reported-by:
Sergei Antonov <saproj@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
-
Maciej Żenczykowski authored
Looks to have been left out in an oversight. Cc: Mahesh Bandewar <maheshb@google.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Fixes: 235a9d89 ('ipvtap: IP-VLAN based tap driver') Signed-off-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Jonathan Toppins says: ==================== bonding: 802.3ad: fix no transmission of LACPDUs Configuring a bond in a specific order can leave the bond in a state where it never transmits LACPDUs. The first patch adds some kselftest infrastructure and the reproducer that demonstrates the problem. The second patch fixes the issue. The new third patch makes ad_ticks_per_sec a static const and removes the passing of this variable via the stack. ==================== Link: https://lore.kernel.org/r/cover.1660919940.git.jtoppins@redhat.comSigned-off-by:
-
Jonathan Toppins authored
The value is only ever set once in bond_3ad_initialize and only ever read otherwise. There seems to be no reason to set the variable via bond_3ad_initialize when setting the global variable will do. Change ad_ticks_per_sec to a const to enforce its read-only usage. Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Jonathan Toppins authored
This is caused by the global variable ad_ticks_per_sec being zero as demonstrated by the reproducer script discussed below. This causes all timer values in __ad_timer_to_ticks to be zero, resulting in the periodic timer to never fire. To reproduce: Run the script in `tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which puts bonding into a state where it never transmits LACPDUs. line 44: ip link add fbond type bond mode 4 miimon 200 \ xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 48: ip link set fbond address 52:54:00:3B:7C:A6 setting bond MAC addr call stack: bond->dev->dev_addr = new_mac line 52: ip link set fbond type bond ad_actor_sys_prio 65535 setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 60: ip link set veth1-bond down master fbond given: params.ad_actor_system = 0 params.mode = BOND_MODE_8023AD ad.system.sys_mac_addr == bond->dev->dev_addr call stack: bond_enslave -> bond_3ad_initialize(); because first slave -> if ad.system.sys_mac_addr != bond->dev->dev_addr return results: Nothing is run in bond_3ad_initialize() because dev_addr equals sys_mac_addr leaving the global ad_ticks_per_sec zero as it is never initialized anywhere else. The if check around the contents of bond_3ad_initialize() is no longer needed due to commit 5ee14e6d ("bonding: 3ad: apply ad_actor settings changes immediately") which sets ad.system.sys_mac_addr if any one of the bonding parameters whos set function calls bond_3ad_update_ad_actor_settings(). This is because if ad.system.sys_mac_addr is zero it will be set to the current bond mac address, this causes the if check to never be true. Fixes: 5ee14e6d ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: -
Jonathan Toppins authored
This creates a test collection in drivers/net/bonding for bonding specific kernel selftests. The first test is a reproducer that provisions a bond and given the specific order in how the ip-link(8) commands are issued the bond never transmits an LACPDU frame on any of its slaves. Signed-off-by:
-
Sergei Antonov authored
Since priv->rx_mapping[i] is maped in moxart_mac_open(), we should unmap it from moxart_mac_stop(). Fixes 2 warnings. 1. During error unwinding in moxart_mac_probe(): "goto init_fail;", then moxart_mac_free_memory() calls dma_unmap_single() with priv->rx_mapping[i] pointers zeroed. WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980 DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes] CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from check_unmap+0x704/0x980 check_unmap from debug_dma_unmap_page+0x8c/0x9c debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218 moxart_mac_probe from platform_probe+0x48/0x88 platform_probe from really_probe+0xc0/0x2e4 2. After commands: ip link set dev eth0 down ip link set dev eth0 up WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec add_dma_entry from dma_map_page_attrs+0x110/0x328 dma_map_page_attrs from moxart_mac_open+0x134/0x320 moxart_mac_open from __dev_open+0x11c/0x1ec __dev_open from __dev_change_flags+0x194/0x22c __dev_change_flags from dev_change_flags+0x14/0x44 dev_change_flags from devinet_ioctl+0x6d4/0x93c devinet_ioctl from inet_ioctl+0x1ac/0x25c v1 -> v2: Extraneous change removed. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.comSigned-off-by:
-
Xiaolei Wang authored
For some MAC drivers, they set the mac_managed_pm to true in its ->ndo_open() callback. So before the mac_managed_pm is set to true, we still want to leverage the mdio_bus_phy_suspend()/resume() for the phy device suspend and resume. In this case, the phy device is in PHY_READY, and we shouldn't warn about this. It also seems that the check of mac_managed_pm in WARN_ON is redundant since we already check this in the entry of mdio_bus_phy_resume(), so drop it. Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by:
-
Alex Elder authored
In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed) and then its virtual address is fetched using qcom_smem_get(). The physical address associated with that region is also fetched. The physical address is adjusted so that it is page-aligned, and an attempt is made to update the size of the region to compensate for any non-zero adjustment. But that adjustment isn't done properly. The physical address is aligned twice, and as a result the size is never actually adjusted. Fix this by *not* aligning the "addr" local variable, and instead making the "phys" local variable be the adjusted "addr" value. Fixes: a0036bb4 ("net: ipa: define SMEM memory region for IPA") Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220818134206.567618-1-elder@linaro.orgSigned-off-by:
-
Vladimir Oltean authored
DSA has multiple ways of specifying a MAC connection to an internal PHY. One requires a DT description like this: port@0 { reg = <0>; phy-handle = <&internal_phy>; phy-mode = "internal"; }; (which is IMO the recommended approach, as it is the clearest description) but it is also possible to leave the specification as just: port@0 { reg = <0>; } and if the driver implements ds->ops->phy_read and ds->ops->phy_write, the DSA framework "knows" it should create a ds->slave_mii_bus, and it should connect to a non-OF-based internal PHY on this MDIO bus, at an MDIO address equal to the port address. There is also an intermediary way of describing things: port@0 { reg = <0>; phy-handle = <&internal_phy>; }; In case 2, DSA calls phylink_connect_phy() and in case 3, it calls phylink_of_phy_connect(). In both cases, phylink_create() has been called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both cases, PHY_INTERFACE_MODE_NA is translated into phy->interface. It is important to note that phy_device_create() initializes dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the PHY. All this means that in order to maintain compatibility with device tree blobs where the phy-mode property is missing, we need to allow the "gmii" phy-mode and treat it as "internal". Fixes: 2c709e0b ("net: dsa: microchip: ksz8795: add phylink support") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216320Reported-by:Craig McQueen <craig@mcqueen.id.au> Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Tested-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20220818143250.2797111-1-vladimir.oltean@nxp.comSigned-off-by:
-
- 22 Aug, 2022 5 commits
-
-
Duoming Zhou authored
When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer. Fixes: c656aa4c ("nfc: pn533: add UART phy driver") Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hayes Wang says: ==================== r8152: fix flow control settings These patches fix the settings of RX FIFO about flow control. ==================== Signed-off-by: -
Hayes Wang authored
The RX FIFO would be changed when suspending, so the related settings have to be modified, too. Otherwise, the flow control would work abnormally. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333Reported-by:
Mark Blakeney <mark.blakeney@bullet-systems.net> Fixes: cdf0b86b ("r8152: fix a WOL issue") Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Hayes Wang authored
The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes. Fixes: 195aae32 ("r8152: support new chips") Signed-off-by:
-
Bernard Pidoux authored
Commit 3b3fd068 added NULL check for `rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to check rose_loopback_neigh->loopback. It thus prevents *all* rose connect. The reason is that a special rose_neigh loopback has a NULL device. /proc/net/rose_neigh illustrates it via rose_neigh_show() function : [...] seq_printf(seq, "%05d %-9s %-4s %3d %3d %3s %3s %3lu %3lu", rose_neigh->number, (rose_neigh->loopback) ? "RSLOOP-0" : ax2asc(buf, &rose_neigh->callsign), rose_neigh->dev ? rose_neigh->dev->name : "???", rose_neigh->count, /proc/net/rose_neigh displays special rose_loopback_neigh->loopback as callsign RSLOOP-0: addr callsign dev count use mode restart t0 tf digipeaters 00001 RSLOOP-0 ??? 1 2 DCE yes 0 0 By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called even in case rose_loopback_neigh->dev is NULL. This repairs rose connections. Verification with rose client application FPAC: FPAC-Node v 4.1.3 (built Aug 5 2022) for LINUX (help = h) F6BVP-4 (Commands = ?) : u Users - AX.25 Level 2 sessions : Port Callsign Callsign AX.25 state ROSE state NetRom status axudp F6BVP-5 -> F6BVP-9 Connected Connected --------- Fixes: 3b3fd068 ("rose: Fix Null pointer dereference in rose_send_frame()") Signed-off-by:
Bernard Pidoux <f6bvp@free.fr> Suggested-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Thomas DL9SAU Osterried <thomas@osterried.de> Signed-off-by:
-
- 19 Aug, 2022 5 commits
-
-
Sabrina Dubroca authored
This reverts commit 6fc498bc. Commit 6fc498bc states: SCI should be updated, because it contains MAC in its first 6 octets. That's not entirely correct. The SCI can be based on the MAC address, but doesn't have to be. We can also use any 64-bit number as the SCI. When the SCI based on the MAC address, it uses a 16-bit "port number" provided by userspace, which commit 6fc498bc overwrites with 1. In addition, changing the SCI after macsec has been setup can just confuse the receiver. If we configure the RXSC on the peer based on the original SCI, we should keep the same SCI on TX. When the macsec device is being managed by a userspace key negotiation daemon such as wpa_supplicant, commit 6fc498bc would also overwrite the SCI defined by userspace. Fixes: 6fc498bc ("net: macsec: update SCI upon MAC address change.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.netSigned-off-by:
-
Sean Anderson authored
As discussed in commit 73a21fa8 ("dpaa_eth: support all modes with rate adapting PHYs"), we must add a workaround for Aquantia phys with in-tree support in order to keep 1G support working. Update this workaround for the AQR113C phy found on revision C LS1046ARDB boards. Fixes: 12cf1b89 ("net: phy: Add support for AQR113C EPHY") Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Acked-by:
Camelia Groza <camelia.groza@nxp.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF socket maps get data out of the TCP stack) - tls: rx: react to strparser initialization errors - netfilter: nf_tables: fix scheduling-while-atomic splat - net: fix suspicious RCU usage in bpf_sk_reuseport_detach() Current release - new code bugs: - mlxsw: ptp: fix a couple of races, static checker warnings and error handling Previous releases - regressions: - netfilter: - nf_tables: fix possible module reference underflow in error path - make conntrack helpers deal with BIG TCP (skbs > 64kB) - nfnetlink: re-enable conntrack expectation events - net: fix potential refcount leak in ndisc_router_discovery() Previous releases - always broken: - sched: cls_route: disallow handle of 0 - neigh: fix possible local DoS due to net iface start/stop loop - rtnetlink: fix module refcount leak in rtnetlink_rcv_msg - sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu - virtio_net: fix endian-ness for RSS - dsa: mv88e6060: prevent crash on an unused port - fec: fix timer capture timing in `fec_ptp_enable_pps()` - ocelot: stats: fix races, integer wrapping and reading incorrect registers (the change of register definitions here accounts for bulk of the changed LoC in this PR)" * tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) net: moxa: MAC address reading, generating, validity checking tcp: handle pure FIN case correctly tcp: refactor tcp_read_skb() a bit tcp: fix tcp_cleanup_rbuf() for tcp_read_skb() tcp: fix sock skb accounting in tcp_read_skb() igb: Add lock to avoid data race dt-bindings: Fix incorrect "the the" corrections net: genl: fix error path memory leak in policy dumping stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove() net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run net/mlx5e: Allocate flow steering storage during uplink initialization net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset net: mscc: ocelot: make struct ocelot_stat_layout array indexable net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work net: mscc: ocelot: turn stats_lock into a spinlock net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it ... -
Linus Torvalds authored
Merge tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: - fix landlock test build regression * tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/landlock: fix broken include of linux/landlock.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull rtla tool fixes from Steven Rostedt: "Fixes for the Real-Time Linux Analysis tooling: - Fix tracer name in comments and prints - Fix setting up symlinks - Allow extra flags to be set in build - Consolidate and show all necessary libraries not found in build error" * tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rtla: Consolidate and show all necessary libraries that failed for building tools/rtla: Build with EXTRA_{C,LD}FLAGS tools/rtla: Fix command symlinks rtla: Fix tracer name
-
- 18 Aug, 2022 14 commits
-
-
Sergei Antonov authored
This device does not remember its MAC address, so add a possibility to get it from the platform. If it fails, generate a random address. This will provide a MAC address early during boot without user space being involved. Also remove extra calls to is_valid_ether_addr(). Made after suggestions by Andrew Lunn: 1) Use eth_hw_addr_random() to assign a random MAC address during probe. 2) Remove is_valid_ether_addr() from moxart_mac_open() 3) Add a call to platform_get_ethdev_address() during probe 4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this v1 -> v2: Handle EPROBE_DEFER returned from platform_get_ethdev_address(). Move MAC reading code to the beginning of the probe function. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Cong Wang says: ==================== tcp: some bug fixes for tcp_read_skb() This patchset contains 3 bug fixes and 1 minor refactor patch for tcp_read_skb(). V1 only had the first patch, as Eric prefers to fix all of them together, I have to group them together. ==================== Link: https://lore.kernel.org/r/20220817195445.151609-1-xiyou.wangcong@gmail.comSigned-off-by:
-
Cong Wang authored
When skb->len==0, the recv_actor() returns 0 too, but we also use 0 for error conditions. This patch amends this by propagating the errors to tcp_read_skb() so that we can distinguish skb->len==0 case from error cases. Fixes: 04919bed ("tcp: Introduce tcp_read_skb()") Reported-by:
Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Cong Wang authored
As tcp_read_skb() only reads one skb at a time, the while loop is unnecessary, we can turn it into an if. This also simplifies the code logic. Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Cong Wang authored
tcp_cleanup_rbuf() retrieves the skb from sk_receive_queue, it assumes the skb is not yet dequeued. This is no longer true for tcp_read_skb() case where we dequeue the skb first. Fix this by introducing a helper __tcp_cleanup_rbuf() which does not require any skb and calling it in tcp_read_skb(). Fixes: 04919bed ("tcp: Introduce tcp_read_skb()") Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Cong Wang authored
Before commit 965b57b4 ("net: Introduce a new proto_ops ->read_skb()"), skb was not dequeued from receive queue hence when we close TCP socket skb can be just flushed synchronously. After this commit, we have to uncharge skb immediately after being dequeued, otherwise it is still charged in the original sock. And we still need to retain skb->sk, as eBPF programs may extract sock information from skb->sk. Therefore, we have to call skb_set_owner_sk_safe() here. Fixes: 965b57b4 ("net: Introduce a new proto_ops ->read_skb()") Reported-and-tested-by: syzbot+a0e6f8738b58f7654417@syzkaller.appspotmail.com Tested-by:
Stanislav Fomichev <sdf@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Lin Ma authored
The commit c23d92b8 ("igb: Teardown SR-IOV before unregister_netdev()") places the unregister_netdev() call after the igb_disable_sriov() call to avoid functionality issue. However, it introduces several race conditions when detaching a device. For example, when .remove() is called, the below interleaving leads to use-after-free. (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] Moreover, the igb_disable_sriov() also suffers from data race with the requests from VF driver. (FREE from device detaching) | (USE from requests) igb_remove | igb_msix_other igb_disable_sriov | igb_msg_task kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count adapter->vfs_allocated_count = 0 | To this end, this commit first eliminates the data races from netdev core by using rtnl_lock (similar to commit 71947923 ("dpaa2-eth: add MAC/PHY support through phylink")). And then adds a spinlock to eliminate races from driver requests. (similar to commit 1e53834c ("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero") Fixes: c23d92b8 ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-17 (ice) This series contains updates to ice driver only. Grzegorz prevents modifications to VLAN 0 when setting VLAN promiscuous as it will already be set. He also ignores -EEXIST error when attempting to set promiscuous and ensures promiscuous mode is properly cleared from the hardware when being removed. Benjamin ignores additional -EEXIST errors when setting promiscuous mode since the existing mode is the desired mode. Sylwester fixes VFs to allow sending of tagged traffic when no VLAN filters exist. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix VF not able to send tagged traffic with no VLAN filters ice: Ignore error message when setting same promiscuous mode ice: Fix clearing of promisc mode with bridge over bond ice: Ignore EEXIST when setting promisc mode ice: Fix double VLAN error when entering promisc mode ==================== Link: https://lore.kernel.org/r/20220817171329.65285-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Geert Uytterhoeven authored
Lots of double occurrences of "the" were replaced by single occurrences, but some of them should become "to the" instead. Fixes: 12e5bde1 ("dt-bindings: Fix typo in comment") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/c5743c0a1a24b3a8893797b52fed88b99e56b04b.1660755148.git.geert+renesas@glider.beSigned-off-by:
-
Jakub Kicinski authored
If construction of the array of policies fails when recording non-first policy we need to unwind. netlink_policy_dump_add_policy() itself also needs fixing as it currently gives up on error without recording the allocated pointer in the pstate pointer. Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com Fixes: 50a896cf ("genetlink: properly support per-op policy dumping") Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.orgSigned-off-by:
-
Christophe JAILLET authored
Commit 09f012e6 ("stmmac: intel: Fix clock handling on error and remove paths") removed this clk_disable_unprepare() This was partly revert by commit ac322f86 ("net: stmmac: Fix clock handling on remove path") which removed this clk_disable_unprepare() because: " While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. " However later on, commit 5ec55823 ("net: stmmac: add clocks management for gmac driver") has updated stmmac_dvr_remove() which do not call clk_disable_unprepare() anymore. So this call should now be called from intel_eth_pci_remove(). Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Jens Wiklander authored
With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early. Fixes: 033ddf12 ("tee: add register user memory") Cc: stable@vger.kernel.org Reported-by:
Nimish Mishra <neelam.nimish@gmail.com> Reported-by:
Anirban Chakraborty <ch.anirban00727@gmail.com> Reported-by:
Debdeep Mukhopadhyay <debdeep.mukhopadhyay@gmail.com> Suggested-by:
Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lorenzo Bianconi authored
Fix possible NULL pointer dereference in mtk_xdp_run() if the ebpf program returns XDP_TX and xdp_convert_buff_to_frame routine fails returning NULL. Fixes: 5886d26f ("net: ethernet: mtk_eth_soc: add xmit XDP support") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/627a07d759020356b64473e09f0855960e02db28.1660659112.git.lorenzo@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
IPsec code relies on valid priv->fs pointer that is the case in NIC flow, but not correct in uplink. Before commit that mentioned in the Fixes line, that pointer was valid in all flows as it was allocated together with priv struct. In addition, the cleanup representors routine called to that not-initialized priv->fs pointer and its internals which caused NULL deference. So, move FS allocation to be as early as possible. Fixes: af8bbf73 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ae46fa5bed3c67f937bfdfc0370101278f5422f1.1660639564.git.leonro@nvidia.comSigned-off-by:
-
