- 19 May, 2016 40 commits
-
-
David Sterba authored
commit 11ea474f upstream. Let's remove the error message that appears when the tree_id is not present. This can happen with the quota tree and has been observed in practice. The applications are supposed to handle -ENOENT and we don't need to report that in the system log as it's not a fatal error. Reported-by:
Vlastimil Babka <vbabka@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit dc95f7bf upstream. truncate_space_check is using btrfs_csum_bytes_to_leaves() but forgetting to multiply by nodesize so we get an actual byte count. We need a tracepoint here so that we have the matching reserve for the release that will come later. Also add a comment to make clear what the intent of truncate_space_check is. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Zhao Lei authored
commit 50378530 upstream. reada_zone->end is end pos of segment: end = start + cache->key.offset - 1; So we need to use "<=" in condition to judge is a pos in the segment. The problem happened rearly, because logical pos rarely pointed to last 4k of a blockgroup, but we need to fix it to make code right in logic. Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by:
-
Alex Deucher authored
commit c47b9e09 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit ff0bd441 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by:
-
Arindam Nath authored
commit 1a738347 upstream. There is an issue observed when we hotplug a second DP 4K monitor to the system. Sometimes, the link training fails for the second monitor after HPD interrupt generation. The issue happens when some queued or deferred transactions are already present on the AUX channel when we initiate a new transcation to (say) get DPCD or during link training. We set AUX_IGNORE_HPD_DISCON bit in the AUX_CONTROL register so that we can ignore any such deferred transactions when a new AUX transaction is initiated. Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Reviewed-by:
-
Imre Deak authored
commit d6a862fe upstream. BSpec requires us to wait ~100 clocks before re-enabling clock gating, so make sure we do this. CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462280061-1457-2-git-send-email-imre.deak@intel.com (cherry picked from commit 48e5d68d) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Lyude authored
commit 26792526 upstream. Right now MST audio is causing too many kernel panics to really keep around in the kernel. On top of that, even after fixing said panics it's still basically non-functional (at least on all the setups I've tested it on). Revert until we have a proper solution for this. This reverts commit 3d52ccf5. Signed-off-by:
Lyude <cpaul@redhat.com> Fixes: 3d52ccf5 ("drm/i915: start adding dp mst audio") Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462287692-28570-1-git-send-email-cpaul@redhat.com (cherry picked from commit 5a8f97ea) Signed-off-by:
-
Daniel Vetter authored
commit 2700818a upstream. LPT is pch, so might run into the fdi bandwidth constraint (especially since it has only 2 lanes). But right now we just force pipe_bpp back to 24, resulting in a nice loop (which we bail out with a loud WARN_ON). Fix this. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=93477Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Lucas Stach authored
commit e3c00d87 upstream. On DCE6.1 PPLL2 is exclusively available to UNIPHYA, so it should not be taken into consideration when looking for an already enabled PLL to be shared with other outputs. This fixes the broken VGA port (TRAVIS DP->VGA bridge) on my Richland based laptop, where the internal display is connected to UNIPHYA through a TRAVIS DP->LVDS bridge. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=78987 v2: agd: add check in radeon_get_shared_nondp_ppll as well, drop extra parameter. Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
-
Ville Syrjälä authored
commit a04e23d4 upstream. Update CDCLK_FREQ on BDW after changing the cdclk frequency. Not sure if this is a late addition to the spec, or if I simply overlooked this step when writing the original code. This is what Bspec has to say about CDCLK_FREQ: "Program this field to the CD clock frequency minus one. This is used to generate a divided down clock for miscellaneous timers in display." And the "Broadwell Sequences for Changing CD Clock Frequency" section clarifies this further: "For CD clock 337.5 MHz, program 337 decimal. For CD clock 450 MHz, program 449 decimal. For CD clock 540 MHz, program 539 decimal. For CD clock 675 MHz, program 674 decimal." Cc: Mika Kahola <mika.kahola@intel.com> Fixes: b432e5cf ("drm/i915: BDW clock change support") Signed-off-by:
Mika Kahola <mika.kahola@intel.com> (cherry picked from commit 7f1052a8) Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 93f0750d upstream. This patch causes a Kernel panic when called on a DVB driver. This was also reported by David R <david@unsolicited.net>: May 7 14:47:35 server kernel: [ 501.247123] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 May 7 14:47:35 server kernel: [ 501.247239] IP: [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.247354] PGD cae6f067 PUD ca99c067 PMD 0 May 7 14:47:35 server kernel: [ 501.247426] Oops: 0000 [#1] SMP May 7 14:47:35 server kernel: [ 501.247482] Modules linked in: xfs tun xt_connmark xt_TCPMSS xt_tcpmss xt_owner xt_REDIRECT nf_nat_redirect xt_nat ipt_MASQUERADE nf_nat_masquerade_ipv4 ts_kmp ts_bm xt_string ipt_REJECT nf_reject_ipv4 xt_recent xt_conntrack xt_multiport xt_pkttype xt_tcpudp xt_mark nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables pppoe pppox dm_crypt ts2020 regmap_i2c ds3000 cx88_dvb dvb_pll cx88_vp3054_i2c mt352 videobuf2_dvb cx8800 cx8802 cx88xx pl2303 tveeprom videobuf2_dma_sg ppdev videobuf2_memops videobuf2_v4l2 videobuf2_core dvb_usb_digitv snd_hda_codec_via snd_hda_codec_hdmi snd_hda_codec_generic radeon dvb_usb snd_hda_intel amd64_edac_mod serio_raw snd_hda_codec edac_core fbcon k10temp bitblit softcursor snd_hda_core font snd_pcm_oss i2c_piix4 snd_mixer_oss tileblit drm_kms_helper syscopyarea snd_pcm snd_seq_dummy sysfillrect snd_seq_oss sysimgblt fb_sys_fops ttm snd_seq_midi r8169 snd_rawmidi drm snd_seq_midi_event e1000e snd_seq snd_seq_device snd_timer snd ptp pps_core i2c_algo_bit soundcore parport_pc ohci_pci shpchp tpm_tis tpm nfsd auth_rpcgss oid_registry hwmon_vid exportfs nfs_acl mii nfs bonding lockd grace lp sunrpc parport May 7 14:47:35 server kernel: [ 501.249564] CPU: 1 PID: 6889 Comm: vb2-cx88[0] Not tainted 4.5.3 #3 May 7 14:47:35 server kernel: [ 501.249644] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 0211 07/08/2009 May 7 14:47:35 server kernel: [ 501.249767] task: ffff8800aebf3600 ti: ffff8801e07a0000 task.ti: ffff8801e07a0000 May 7 14:47:35 server kernel: [ 501.249861] RIP: 0010:[<ffffffffa0222c71>] [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.250002] RSP: 0018:ffff8801e07a3de8 EFLAGS: 00010086 May 7 14:47:35 server kernel: [ 501.250071] RAX: 0000000000000283 RBX: ffff880210dc5000 RCX: 0000000000000283 May 7 14:47:35 server kernel: [ 501.250161] RDX: ffffffffa0222cf0 RSI: 0000000000000000 RDI: ffff880210dc5014 May 7 14:47:35 server kernel: [ 501.250251] RBP: ffff8801e07a3df8 R08: ffff8801e07a0000 R09: 0000000000000000 May 7 14:47:35 server kernel: [ 501.250348] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800cda2a9d8 May 7 14:47:35 server kernel: [ 501.250438] R13: ffff880210dc51b8 R14: 0000000000000000 R15: ffff8800cda2a828 May 7 14:47:35 server kernel: [ 501.250528] FS: 00007f5b77fff700(0000) GS:ffff88021fc40000(0000) knlGS:00000000adaffb40 May 7 14:47:35 server kernel: [ 501.250631] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b May 7 14:47:35 server kernel: [ 501.250704] CR2: 0000000000000004 CR3: 00000000ca19d000 CR4: 00000000000006e0 May 7 14:47:35 server kernel: [ 501.250794] Stack: May 7 14:47:35 server kernel: [ 501.250822] ffff8801e07a3df8 ffffffffa0222cfd ffff8801e07a3e70 ffffffffa0236beb May 7 14:47:35 server kernel: [ 501.250937] 0000000000000283 ffff8801e07a3e94 0000000000000000 0000000000000000 May 7 14:47:35 server kernel: [ 501.251051] ffff8800aebf3600 ffffffff8108d8e0 ffff8801e07a3e38 ffff8801e07a3e38 May 7 14:47:35 server kernel: [ 501.251165] Call Trace: May 7 14:47:35 server kernel: [ 501.251200] [<ffffffffa0222cfd>] ? __verify_planes_array_core+0xd/0x10 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.251306] [<ffffffffa0236beb>] vb2_core_dqbuf+0x2eb/0x4c0 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251398] [<ffffffff8108d8e0>] ? prepare_to_wait_event+0x100/0x100 May 7 14:47:35 server kernel: [ 501.251482] [<ffffffffa023855b>] vb2_thread+0x1cb/0x220 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251569] [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251662] [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.255982] [<ffffffff8106f984>] kthread+0xc4/0xe0 May 7 14:47:35 server kernel: [ 501.260292] [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50 May 7 14:47:35 server kernel: [ 501.264615] [<ffffffff81697a5f>] ret_from_fork+0x3f/0x70 May 7 14:47:35 server kernel: [ 501.268962] [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50 May 7 14:47:35 server kernel: [ 501.273216] Code: 0d 01 74 16 48 8b 46 28 48 8b 56 30 48 89 87 d0 01 00 00 48 89 97 d8 01 00 00 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 <8b> 46 04 48 89 e5 8d 50 f7 31 c0 83 fa 01 76 02 5d c3 48 83 7e May 7 14:47:35 server kernel: [ 501.282146] RIP [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.286391] RSP <ffff8801e07a3de8> May 7 14:47:35 server kernel: [ 501.290619] CR2: 0000000000000004 May 7 14:47:35 server kernel: [ 501.294786] ---[ end trace b2b354153ccad110 ]--- This reverts commit 2c1f6951. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Fixes: 2c1f6951 ("[media] videobuf2-v4l2: Verify planes array in buffer dequeueing") Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Marek Szyprowski authored
commit 6ae645d5 upstream. NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 104594b0 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Al Viro authored
commit 99d82582 upstream. Payloads of NM entries are not supposed to contain NUL. When we run into such, only the part prior to the first NUL goes into the concatenation (i.e. the directory entry name being encoded by a bunch of NM entries). We do stop when the amount collected so far + the claimed amount in the current NM entry exceed 254. So far, so good, but what we return as the total length is the sum of *claimed* sizes, not the actual amount collected. And that can grow pretty large - not unlimited, since you'd need to put CE entries in between to be able to get more than the maximum that could be contained in one isofs directory entry / continuation chunk and we are stop once we'd encountered 32 CEs, but you can get about 8Kb easily. And that's what will be passed to readdir callback as the name length. 8Kb __copy_to_user() from a buffer allocated by __get_free_page() Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Steven Rostedt authored
commit 106b816c upstream. At the end of process_filter(), collapse_tree() was changed to update the parg parameter, but the reassignment after the call wasn't removed. What happens is that the "current_op" gets modified and freed and parg is assigned to the new allocated argument. But after the call to collapse_tree(), parg is assigned again to the just freed "current_op", and this causes the tool to crash. The current_op variable must also be assigned to NULL in case of error, otherwise it will cause it to be free()ed twice. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Fixes: 42d6194d ("tools lib traceevent: Refactor process_filter()") Link: http://lkml.kernel.org/r/20160511150936.678c18a1@gandalf.local.homeSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Johannes Thumshirn authored
commit 2bcbc814 upstream. The qla1280 driver sets the scsi_host_template's can_queue field to 0xfffff which results in an allocation failure when allocating the block layer tags for the driver's queues. This was introduced with the change for host wide tags in commit 64d513ac - "scsi: use host wide tags by default". Reduce can_queue to MAX_OUTSTANDING_COMMANDS (512) to solve the allocation error. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Fixes: 64d513ac - "scsi: use host wide tags by default" Cc: Laura Abbott <labbott@redhat.com> Cc: Michael Reed <mdr@sgi.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by:
-
Al Viro authored
commit 10c64cea upstream. * if we have a hashed negative dentry and either CREAT|EXCL on r/o filesystem, or CREAT|TRUNC on r/o filesystem, or CREAT|EXCL with failing may_o_create(), we should fail with EROFS or the error may_o_create() has returned, but not ENOENT. Which is what the current code ends up returning. * if we have CREAT|TRUNC hitting a regular file on a read-only filesystem, we can't fail with EROFS here. At the very least, not until we'd done follow_managed() - we might have a writable file (or a device, for that matter) bound on top of that one. Moreover, the code downstream will see that O_TRUNC and attempt to grab the write access (*after* following possible mount), so if we really should fail with EROFS, it will happen. No need to do that inside atomic_open(). The real logics is much simpler than what the current code is trying to do - if we decided to go for simple lookup, ended up with a negative dentry *and* had create_error set, fail with create_error. No matter whether we'd got that negative dentry from lookup_real() or had found it in dcache. Acked-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit a2262e5a upstream. The minium voltage of 1800mV is a copy and paste error from the axp20x regulator info. The correct minimum voltage for the ldo_io regulators on the axp22x is 700mV. Fixes: 1b82b4e4 ("regulator: axp20x: Add support for AXP22X regulators") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 3b672623 upstream. The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff instead of 0x1f) thus reading entire register as buck9's voltage. This effectively caused regulator core to interpret values as higher voltages than they were and then to set real voltage much lower than intended. The buck9 provides power to other regulators, including LDO13 and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower voltage caused SD card detection errors on Odroid XU3/XU4: mmc1: card never left busy state mmc1: error -110 whilst initialising SD card During driver probe the regulator core was checking whether initial voltage matches the constraints. With incorrect vsel_mask of 0xff and default value of 0x50, the core interpreted this as 5 V which is outside of constraints (3-3.775 V). Then the regulator core was adjusting the voltage to match the constraints. With incorrect vsel_mask this new voltage mapped to a vere low voltage in the driver. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
-
Wanpeng Li authored
commit f7c17d26 upstream. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0 Modules linked in: CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ #31 Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046 Call Trace: dump_stack+0x89/0xd4 __warn+0xfd/0x120 warn_slowpath_null+0x1d/0x20 rebind_workers+0x1c0/0x1d0 workqueue_cpu_up_callback+0xf5/0x1d0 notifier_call_chain+0x64/0x90 ? trace_hardirqs_on_caller+0xf2/0x220 ? notify_prepare+0x80/0x80 __raw_notifier_call_chain+0xe/0x10 __cpu_notify+0x35/0x50 notify_down_prepare+0x5e/0x80 ? notify_prepare+0x80/0x80 cpuhp_invoke_callback+0x73/0x330 ? __schedule+0x33e/0x8a0 cpuhp_down_callbacks+0x51/0xc0 cpuhp_thread_fun+0xc1/0xf0 smpboot_thread_fn+0x159/0x2a0 ? smpboot_create_threads+0x80/0x80 kthread+0xef/0x110 ? wait_for_completion+0xf0/0x120 ? schedule_tail+0x35/0xf0 ret_from_fork+0x22/0x50 ? __init_kthread_worker+0x70/0x70 ---[ end trace eb12ae47d2382d8f ]--- notify_down_prepare: attempt to take down CPU 0 failed This bug can be reproduced by below config w/ nohz_full= all cpus: CONFIG_BOOTPARAM_HOTPLUG_CPU0=y CONFIG_DEBUG_HOTPLUG_CPU0=y CONFIG_NO_HZ_FULL=y As Thomas pointed out: | If a down prepare callback fails, then DOWN_FAILED is invoked for all | callbacks which have successfully executed DOWN_PREPARE. | | But, workqueue has actually two notifiers. One which handles | UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE. | | Now look at the priorities of those callbacks: | | CPU_PRI_WORKQUEUE_UP = 5 | CPU_PRI_WORKQUEUE_DOWN = -5 | | So the call order on DOWN_PREPARE is: | | CB 1 | CB ... | CB workqueue_up() -> Ignores DOWN_PREPARE | CB ... | CB X ---> Fails | | So we call up to CB X with DOWN_FAILED | | CB 1 | CB ... | CB workqueue_up() -> Handles DOWN_FAILED | CB ... | CB X-1 | | So the problem is that the workqueue stuff handles DOWN_FAILED in the up | callback, while it should do it in the down callback. Which is not a good idea | either because it wants to be called early on rollback... | | Brilliant stuff, isn't it? The hotplug rework will solve this problem because | the callbacks become symetric, but for the existing mess, we need some | workaround in the workqueue code. The boot CPU handles housekeeping duty(unbound timers, workqueues, timekeeping, ...) on behalf of full dynticks CPUs. It must remain online when nohz full is enabled. There is a priority set to every notifier_blocks: workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down So tick_nohz_cpu_down callback failed when down prepare cpu 0, and notifier_blocks behind tick_nohz_cpu_down will not be called any more, which leads to workers are actually not unbound. Then hotplug state machine will fallback to undo and online cpu 0 again. Workers will be rebound unconditionally even if they are not unbound and trigger the warning in this progress. This patch fix it by catching !DISASSOCIATED to avoid rebind bound workers. Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Suggested-by:
Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Boris Brezillon authored
commit aab0a4c8 upstream. The memory range assigned to the PMC (Power Management Controller) was not including the PMC_PCR register which are used to control peripheral clocks. This was working fine thanks to the page granularity of ioremap(), but started to fail when we switched to syscon/regmap, because regmap is making sure that all accesses are falling into the reserved range. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by:
Richard Genoud <richard.genoud@gmail.com> Tested-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Miklos Szeredi authored
commit 9409e22a upstream. If a file is renamed to a hardlink of itself POSIX specifies that rename(2) should do nothing and return success. This condition is checked in vfs_rename(). However it won't detect hard links on overlayfs where these are given separate inodes on the overlayfs layer. Overlayfs itself detects this condition and returns success without doing anything, but then vfs_rename() will proceed as if this was a successful rename (detach_mounts(), d_move()). The correct thing to do is to detect this condition before even calling into overlayfs. This patch does this by calling vfs_select_inode() to get the underlying inodes. Signed-off-by:
-
Miklos Szeredi authored
commit 54d5ca87 upstream. Signed-off-by:
-
Alexander Shishkin authored
commit 9f448cd3 upstream. When the PMU driver reports a truncated AUX record, it effectively means that there is no more usable room in the event's AUX buffer (even though there may still be some room, so that perf_aux_output_begin() doesn't take action). At this point the consumer still has to be woken up and the event has to be disabled, otherwise the event will just keep spinning between perf_aux_output_begin() and perf_aux_output_end() until its context gets unscheduled. Again, for cpu-wide events this means never, so once in this condition, they will be forever losing data. Fix this by disabling the event and waking up the consumer in case of a truncated AUX record. Reported-by:
Markus Metzger <markus.t.metzger@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1462886313-13660-3-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Namhyung Kim authored
commit e9d848cb upstream. The commit b97511c5 ("perf tools: Add overhead/overhead_children keys defaults via string") moved initialization of column headers but it missed to check the sort__mode. As 'perf diff' doesn't call perf_hpp__init(), the setup_overhead() also should not be called. Before: # Baseline Delta Children Overhead Shared Object Symbol # ........ ....... ........ ........ ................... ....................... # 28.48% -28.47% 28.48% 28.48% [kernel.vmlinux ] [k] intel_idle 11.51% -11.47% 11.51% 11.51% libxul.so [.] 0x0000000001a360f7 3.49% -3.49% 3.49% 3.49% [kernel.vmlinux] [k] generic_exec_single 2.91% -2.89% 2.91% 2.91% libdbus-1.so.3.8.11 [.] 0x000000000000cdc2 2.86% -2.85% 2.86% 2.86% libxcb.so.1.1.0 [.] 0x000000000000c890 2.44% -2.39% 2.44% 2.44% [kernel.vmlinux] [k] perf_event_aux_ctx After: # Baseline Delta Shared Object Symbol # ........ ....... ................... ....................... # 28.48% -28.47% [kernel.vmlinux] [k] intel_idle 11.51% -11.47% libxul.so [.] 0x0000000001a360f7 3.49% -3.49% [kernel.vmlinux] [k] generic_exec_single 2.91% -2.89% libdbus-1.so.3.8.11 [.] 0x000000000000cdc2 2.86% -2.85% libxcb.so.1.1.0 [.] 0x000000000000c890 2.44% -2.39% [kernel.vmlinux] [k] perf_event_aux_ctx Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b97511c5 ("perf tools: Add overhead/overhead_children keys defaults via string") Link: http://lkml.kernel.org/r/1462890384-12486-2-git-send-email-acme@kernel.orgSigned-off-by:
-
Jack Pham authored
commit dec8e8f6 upstream. Specifically for the case of reads that use the Extended Register Read Long command, a multi-byte read operation is broken up into 8-byte chunks. However the call to spmi_ext_register_readl() is incorrectly passing 'val_size', which if greater than 8 will always fail. The argument should instead be 'len'. Fixes: c9afbb05 ("regmap: spmi: support base and extended register spaces") Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Ludovic Desroches authored
commit 5305a7b7 upstream. The default configuration of a pin is often with a value in the pull-up/down field at chip reset. So, even if the internal logic of the controller prevents writing a configuration with pull-up and pull-down at the same time, we must ensure explicitly this condition before writing the register. This was leading to a pull-down condition not taken into account for instance. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 77618084 ("pinctrl: introduce driver for Atmel PIO4 controller") Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ben Hutchings authored
commit 1ff7760f upstream. We clamp frame_len_words to a maximum of 4096, but do not actually limit the number of words written or read through the DATA registers or the length added to spi_message::actual_length. This results in silent data corruption for commands longer than this maximum. Recalculate the length of each transfer, taking frame_len_words into account. Use this length in qspi_{read,write}_msg(), and to increment spi_message::actual_length. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Ben Hutchings authored
commit ea1b60fb upstream. Each transfer can specify 8, 16 or 32 bits per word independently of the default for the device being addressed. However, currently we calculate the number of words in the frame assuming that the word size is the device default. If multiple transfers in the same message have differing bits_per_word, we bitwise-or the different values in the WLEN register field. Fix both of these. Also rename 'frame_length' to 'frame_len_words' to make clear that it's not a byte count like spi_message::frame_length. Signed-off-by:
-
Jarkko Nikula authored
commit 66ec246e upstream. Certain Intel Sunrisepoint PCH variants report zero chip selects in SPI capabilities register even they have one per port. Detection in pxa2xx_spi_probe() sets master->num_chipselect to 0 leading to -EINVAL from spi_register_master() where chip select count is validated. Fix this by not using SPI capabilities register on Sunrisepoint. They don't have more than one chip select so use the default value 1 instead of detection. Fixes: 8b136baa ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals") Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
commit addacd80 upstream. The HD-audio reconfig function got broken in the recent kernels, typically resulting in a failure like: snd_hda_intel 0000:00:1b.0: control 3:0:0:Playback Channel Map:0 is already present This is because of the code restructuring to move the PCM and control instantiation into the codec drive probe, by the commit [bcd96557: ALSA: hda - Build PCMs and controls at codec driver probe]. Although the commit above removed the calls of snd_hda_codec_build_pcms() and *_build_controls() at the controller driver probe, the similar calls in the reconfig were still left forgotten. This caused the conflicting and duplicated PCMs and controls. The fix is trivial: just remove these superfluous calls from reconfig_codec(). Fixes: bcd96557 ('ALSA: hda - Build PCMs and controls at codec driver probe') Reported-by:
Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kaho Ng authored
commit 2da2dc9e upstream. For reducing the noise from the headset output on ASUS UX501VW, call the existing fixup, alc_fixup_headset_mode_alc668(), additionally. Thread: https://bbs.archlinux.org/viewtopic.php?id=209554Signed-off-by:
Kaho Ng <ngkaho1234@gmail.com> Signed-off-by:
-
Yura Pakhuchiy authored
commit 3231e205 upstream. Subwoofer does not work out of the box on ASUS N751/N551 laptops. This patch fixes it. Patch tested on N751 laptop. N551 part is not tested, but according to [1] and [2] this laptop requires similar changes, so I included them in the patch. 1. https://github.com/honsiorovskyi/asus-n551-hda-fix 2. https://bugs.launchpad.net/ubuntu/+source/alsa-tools/+bug/1405691 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117781Signed-off-by:
Yura Pakhuchiy <pakhuchiy@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 84add303 upstream. Phoenix Audio has yet another device with another id (even a different vendor id, 0556:0014) that requires the same quirk for the sample rate. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221Signed-off-by:
-
Takashi Iwai authored
commit 2d2c038a upstream. Phoenix Audio MT202pcs (1de7:0114) and MT202exe (1de7:0013) need the same workaround as TMX320 for avoiding the firmware bug. It fixes the frequent error about the sample rate inquiries and the slow device probe as consequence. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117321Signed-off-by:
-
Herbert Xu authored
commit df27b26f upstream. As akcipher uses an SG interface, you must not use vmalloc memory as input for it. This patch fixes testmgr to copy the vmalloc test vectors to kmalloc memory before running the test. This patch also removes a superfluous sg_virt call in do_test_rsa. Reported-by:
Anatoly Pugachev <matorola@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
commit 13f4bb78 upstream. The crypto hash walk code is broken when supplied with an offset greater than or equal to PAGE_SIZE. This patch fixes it by adjusting walk->pg and walk->offset when this happens. Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Tadeusz Struk authored
commit 6dc5df71 upstream. Fix undefined reference issue reported by kbuild test robot. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Tadeusz Struk authored
commit 9e209fcf upstream. The pf2vf_resp_wq is a global so it has to be created at init and destroyed at exit, instead of per device. Tested-by:
Suresh Marikkannu <sureshx.marikkannu@intel.com> Signed-off-by:
-
Andrea Arcangeli authored
commit 6d0a07ed upstream. This will provide fully accuracy to the mapcount calculation in the write protect faults, so page pinning will not get broken by false positive copy-on-writes. total_mapcount() isn't the right calculation needed in reuse_swap_page(), so this introduces a page_trans_huge_mapcount() that is effectively the full accurate return value for page_mapcount() if dealing with Transparent Hugepages, however we only use the page_trans_huge_mapcount() during COW faults where it strictly needed, due to its higher runtime cost. This also provide at practical zero cost the total_mapcount information which is needed to know if we can still relocate the page anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we can reuse the page no matter if it's a pte or a pmd_trans_huge triggering the fault, but we can only relocate the page anon_vma to the local vma->anon_vma if we're sure it's only this "vma" mapping the whole THP physical range. Kirill A. Shutemov discovered the problem with moving the page anon_vma to the local vma->anon_vma in a previous version of this patch and another problem in the way page_move_anon_rmap() was called. Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a previous version, because reuse_swap_page must be a macro to call page_trans_huge_mapcount from swap.h, so this uses a macro again instead of an inline function. With this change at least it's a less dangerous usage than it was before, because "page" is used only once now, while with the previous code reuse_swap_page(page++) would have called page_mapcount on page+1 and it would have increased page twice instead of just once. Dean Luick noticed an uninitialized variable that could result in a rmap inefficiency for the non-THP case in a previous version. Mike Marciniszyn said: : Our RDMA tests are seeing an issue with memory locking that bisects to : commit 61f5d698 ("mm: re-enable THP") : : The test program registers two rather large MRs (512M) and RDMA : writes data to a passive peer using the first and RDMA reads it back : into the second MR and compares that data. The sizes are chosen randomly : between 0 and 1024 bytes. : : The test will get through a few (<= 4 iterations) and then gets a : compare error. : : Tracing indicates the kernel logical addresses associated with the individual : pages at registration ARE correct , the data in the "RDMA read response only" : packets ARE correct. : : The "corruption" occurs when the packet crosse two pages that are not physically : contiguous. The second page reads back as zero in the program. : : It looks like the user VA at the point of the compare error no longer points to : the same physical address as was registered. : : This patch totally resolves the issue! Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
"Kirill A. Shutemov" <kirill@shutemov.name> Reviewed-by:
Dean Luick <dean.luick@intel.com> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Tested-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by:
Josh Collier <josh.d.collier@intel.com> Cc: Marc Haber <mh+linux-kernel@zugschlus.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
