- 21 Sep, 2020 6 commits
-
-
Xiaowei Bao authored
Fix some format issue of the code in EP driver. Link: https://lore.kernel.org/r/20200918080024.13639-7-Zhiqiang.Hou@nxp.comSigned-off-by:
Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by:
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Andrew Murray <andrew.murray@arm.com>
-
Xiaowei Bao authored
Add compatible strings for ls1088a and ls2088a. Link: https://lore.kernel.org/r/20200918080024.13639-6-Zhiqiang.Hou@nxp.comSigned-off-by:
Rob Herring <robh@kernel.org>
-
Xiaowei Bao authored
Each PF of EP device should have its own MSI or MSIX capabitily struct, so create a dw_pcie_ep_func struct and move the msi_cap and msix_cap to this struct from dw_pcie_ep, and manage the PFs via a list. Link: https://lore.kernel.org/r/20200918080024.13639-5-Zhiqiang.Hou@nxp.comSigned-off-by:
-
Xiaowei Bao authored
Move the function of getting MSI capability to the front of init function, because the init function of the EP platform driver will use the return value by the function of getting MSI capability. Link: https://lore.kernel.org/r/20200918080024.13639-4-Zhiqiang.Hou@nxp.comSigned-off-by:
-
Xiaowei Bao authored
Add the doorbell mode of MSI-X in DWC EP driver. Link: https://lore.kernel.org/r/20200918080024.13639-3-Zhiqiang.Hou@nxp.comSigned-off-by:
-
Xiaowei Bao authored
Add multiple PFs support for DWC, due to different PF have different config space, we use func_conf_select callback function to access the different PF's config space, the different chip company need to implement this callback function when use the DWC IP core and intend to support multiple PFs feature. Link: https://lore.kernel.org/r/20200918080024.13639-2-Zhiqiang.Hou@nxp.comSigned-off-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com>
-
- 10 Sep, 2020 7 commits
-
-
Rob Herring authored
Convert the remaining cases of register accesses using dbi_base rather than dw_pcie_(read|write)[bwl]_dbi accessors. Link: https://lore.kernel.org/r/20200821035420.380495-41-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The Designware controller has common registers to set number of fast training sequence ordered sets. The Artpec6, Intel, and Tegra driver initialize these register fields. Let's move the initialization to the common setup code and drivers just have to provide the value. There's a slight change in that the common clock mode N_FTS field is now initialized. Previously only the Intel driver set this. It's not clear from the code if common clock mode is used in the Artpec6 or Tegra driver. It depends on the DWC configuration. Given the field is not initialized while the others are, it seems unlikely common clock mode is used. Link: https://lore.kernel.org/r/20200821035420.380495-40-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
'max_width' is read, but never used, so let's remove it. Link: https://lore.kernel.org/r/20200821035420.380495-39-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The PCI_CAP_ID_EXP offset is only needed by intel_pcie_link_setup(), so let's retrieve it there and avoid storing the offset. Link: https://lore.kernel.org/r/20200821035420.380495-38-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
A driver doesn't need to check for DT 'device_type' property, so let's remove the check. Link: https://lore.kernel.org/r/20200821035420.380495-37-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The Intel driver is the only one to set PORT_LINK_DLL_LINK_EN. The default value is set and it seems pretty certain that enabling link initialization is always required. Maybe it could just be dropped from the Intel driver, but lets move setting it into the common code to be sure. Link: https://lore.kernel.org/r/20200821035420.380495-36-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
keystone would force gen2 if no DT property. Now it relies on the PCI_EXP_LNKCAP value. Link: https://lore.kernel.org/r/20200821035420.380495-35-robh@kernel.orgSigned-off-by:
-
- 08 Sep, 2020 27 commits
-
-
Rob Herring authored
The ATU registers are only accessed in pcie-designware.c and can be private to it. Link: https://lore.kernel.org/r/20200821035420.380495-34-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The DBI2 appears to be write-only and there's no read accesses in the code anyways, so let's remove all the read_dbi2 related code. Link: https://lore.kernel.org/r/20200821035420.380495-33-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The Tegra driver has its own defines for common Designware Port Logic registers. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-32-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
While the Designware controller appears to hard code the PCI_CAP_ID_EXP capability register at 0x70, there's no need to hard code this in the driver as it is discoverable. Link: https://lore.kernel.org/r/20200821035420.380495-31-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The QCom driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-30-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The i.MX6 driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-29-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The meson 'elbi' registers are just the Designware 'dbi' space and all the registers accessed are either standard PCI config space or DWC port logic registers. Convert the accesses to use the common defines and register accessors. Link: https://lore.kernel.org/r/20200821035420.380495-28-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The common Designware init already initializes the RC PCI_COMMAND, BAR0 and BAR1 registers. The only difference here is the common code sets SERR. If clearing SERR is what's desired, then the Meson driver should do that instead. Link: https://lore.kernel.org/r/20200821035420.380495-27-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The meson lanes initialization is the same DWC port logic registers as in dw_pcie_setup(). We just need to initialize 'num_lanes' to 1 to do the same init. dw_pcie_setup_rc() sets the PORT_LOGIC_SPEED_CHANGE bit, so setting it can be dropped. Link: https://lore.kernel.org/r/20200821035420.380495-26-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
"Fast Link Mode" is a simulation environment speed up setting which should never be set and the default is not set. However some Amlogic platforms have it set (by firmware presumably). See commit 87dccf09 ("PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link") for more information. Let's clear it in core DWC code so we can drop some vendor specific code. Link: https://lore.kernel.org/r/20200821035420.380495-25-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Add a 'num_lanes' field to allow drivers to provide a the number of lanes if not in DT or using a custom DT property. A driver can provide a non-zero value which is used if the DT doesn't have a 'num-lanes' property. Link: https://lore.kernel.org/r/20200821035420.380495-24-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
PCIE_LINK_WIDTH_SPEED_CONTROL is already defined in pcie-designware.h, so remove it from the i.MX6 driver. Link: https://lore.kernel.org/r/20200821035420.380495-23-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init() instead of duplicating it in all the drivers. Link: https://lore.kernel.org/r/20200821035420.380495-22-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The DWC core driver already parses and stores the 'num-viewport' DT property, so there is no need for the Keystone driver to store it. Link: https://lore.kernel.org/r/20200821035420.380495-21-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The config space is divided in half for type 0 and type 1 accesses, but this is pointless as there's only one iATU window which is reconfigured on each access. The only platform doing something custom is TI Keystone (surprise!). It does its own mapping of the config space to avoid spliting the config space and never actually uses va_cfg1_base as it has its own config space accessors. With the splitting removed, Keystone can use the default mapping of config space. Link: https://lore.kernel.org/r/20200821035420.380495-20-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The PCI bridge resources are stored in pci_host_bridge.windows, so there's no need to store them in a DWC specific struct. There's also no need to parse the resources and store them a 2nd time as they are mainly used for one time setup of iATU windows. Link: https://lore.kernel.org/r/20200821035420.380495-19-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The pci_host_bridge struct already has a pointer to its pci_bus, so let's convert the one user to use the bridge struct and remove the private 'root_bus' pointer. Link: https://lore.kernel.org/r/20200821035420.380495-18-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that there are no more .scan_bus() callbacks, we can remove it and just use pci_host_probe(). Link: https://lore.kernel.org/r/20200821035420.380495-17-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
TI keystone is the only Designware driver using .scan_bus(). This function pointer is the only thing preventing the Designware driver from using pci_host_probe(). Let's use the pci_ops.add_bus hook instead. Link: https://lore.kernel.org/r/20200821035420.380495-16-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Similar to pcibios_add_bus(), call pci_ops.add_bus() when the root bus is added. This allows host bridge drivers to do any setup requiring a bus pointer. There are currently no .add_bus() callbacks, so this is safe to do. Link: https://lore.kernel.org/r/20200821035420.380495-15-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that all the platforms with custom config access handling define their own pci_ops, let's split the default config accessors to use different pci_ops for root and child buses. With this, we can use the generic config accessors. The child bus accesses mainly require a .map_bus() hook to reconfigure the iATU on each config space access. Link: https://lore.kernel.org/r/20200821035420.380495-14-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that all the drivers needing custom config accessors have been converted to define their own pci_ops, we can remove the DWC specific function callbacks {rd,wr}_{own,other}_conf. Link: https://lore.kernel.org/r/20200821035420.380495-13-robh@kernel.orgSigned-off-by: -
Rob Herring authored
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the HiSilicon histb driver to use the standard pci_ops for root bus config accesses. Link: https://lore.kernel.org/r/20200821035420.380495-12-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the Samsung Exynos driver to use the standard pci_ops for root bus config accesses. Link: https://lore.kernel.org/r/20200821035420.380495-11-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the HiSilicon Kirin driver to use the standard pci_ops for root bus config accesses. Link: https://lore.kernel.org/r/20200821035420.380495-10-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the Amlogic meson driver to use the standard pci_ops for root bus config accesses. Link: https://lore.kernel.org/r/20200821035420.380495-9-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the Tegra driver to use the standard pci_ops for root bus config accesses. Link: https://lore.kernel.org/r/20200821035420.380495-8-robh@kernel.orgSigned-off-by:
-
