- 20 Mar, 2013 35 commits
-
-
Eric Dumazet authored
[ Upstream commit f8af75f3 ] Dave reported following crash : general protection fault: 0000 [#1] SMP CPU 2 Pid: 25407, comm: qemu-kvm Not tainted 3.7.9-205.fc18.x86_64 #1 Hewlett-Packard HP Z400 Workstation/0B4Ch RIP: 0010:[<ffffffffa0399bd5>] [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP: 0018:ffff880276913d78 EFLAGS: 00010206 RAX: 50626b6b7876376c RBX: ffff88026e530d68 RCX: ffff88028d158e00 RDX: ffff88026d0d5470 RSI: 0000000000000011 RDI: 0000000000000002 RBP: ffff880276913d88 R08: 0000000000000000 R09: ffff880295002900 R10: 0000000000000000 R11: 0000000000000003 R12: ffffffff81ca3b40 R13: ffffffff8151a8e0 R14: ffff880270875000 R15: 0000000000000002 FS: 00007ff3bce38a00(0000) GS:ffff88029fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fd1430bd000 CR3: 000000027042b000 CR4: 00000000000027e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-kvm (pid: 25407, threadinfo ffff880276912000, task ffff88028c369720) Stack: ffff880156f59100 ffff880156f59100 ffff880276913d98 ffffffff815534f7 ffff880276913db8 ffffffff8151a74b ffff880270875000 ffff880156f59100 ffff880276913dd8 ffffffff8151a5a6 ffff880276913dd8 ffff88026d0d5470 Call Trace: [<ffffffff815534f7>] nf_conntrack_destroy+0x17/0x20 [<ffffffff8151a74b>] skb_release_head_state+0x7b/0x100 [<ffffffff8151a5a6>] __kfree_skb+0x16/0xa0 [<ffffffff8151a666>] kfree_skb+0x36/0xa0 [<ffffffff8151a8e0>] skb_queue_purge+0x20/0x40 [<ffffffffa02205f7>] __tun_detach+0x117/0x140 [tun] [<ffffffffa022184c>] tun_chr_close+0x3c/0xd0 [tun] [<ffffffff8119669c>] __fput+0xec/0x240 [<ffffffff811967fe>] ____fput+0xe/0x10 [<ffffffff8107eb27>] task_work_run+0xa7/0xe0 [<ffffffff810149e1>] do_notify_resume+0x71/0xb0 [<ffffffff81640152>] int_signal+0x12/0x17 Code: 00 00 04 48 89 e5 41 54 53 48 89 fb 4c 8b a7 e8 00 00 00 0f 85 de 00 00 00 0f b6 73 3e 0f b7 7b 2a e8 10 40 00 00 48 85 c0 74 0e <48> 8b 40 28 48 85 c0 74 05 48 89 df ff d0 48 c7 c7 08 6a 3a a0 RIP [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP <ffff880276913d78> This is because tun_net_xmit() needs to call nf_reset() before queuing skb into receive_queue Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Neal Cardwell authored
[ Upstream commit aab2b4bf ] We should not update ts_recent and call tcp_rcv_rtt_measure_ts() both before and after going to step5. That wastes CPU and double-counts the receiver-side RTT sample. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
-
Lorenzo Colitti authored
[ Upstream commit 3e8b0ac3 ] Setting net.ipv6.conf.<interface>.accept_ra=2 causes the kernel to accept RAs even when forwarding is enabled. However, enabling forwarding purges all default routes on the system, breaking connectivity until the next RA is received. Fix this by not purging default routes on interfaces that have accept_ra=2. Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
-
Cong Wang authored
[ Upstream commit ece6b0a2 ] Dave Jones reported the following bug: "When fed mangled socket data, rds will trust what userspace gives it, and tries to allocate enormous amounts of memory larger than what kmalloc can satisfy." WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0() Hardware name: GA-MA78GM-S2H Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ #65 Call Trace: [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds] [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds] [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40 [<ffffffff81567f30>] sys_sendto+0x130/0x180 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b ---[ end trace eed6ae990d018c8b ]--- Reported-by:
Cong Wang <amwang@redhat.com> Acked-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 8b82547e ] The sendmsg() syscall handler for PPPoL2TP doesn't decrease the socket reference counter after successful transmissions. Any successful sendmsg() call from userspace will then increase the reference counter forever, thus preventing the kernel's session and tunnel data from being freed later on. The problem only happens when writing directly on L2TP sockets. PPP sockets attached to L2TP are unaffected as the PPP subsystem uses pppol2tp_xmit() which symmetrically increase/decrease reference counters. This patch adds the missing call to sock_put() before returning from pppol2tp_sendmsg(). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guo Chao authored
commit 5370019d upstream. bd_mutex and lo_ctl_mutex can be held in different order. Path #1: blkdev_open blkdev_get __blkdev_get (hold bd_mutex) lo_open (hold lo_ctl_mutex) Path #2: blkdev_ioctl lo_ioctl (hold lo_ctl_mutex) lo_set_capacity (hold bd_mutex) Lockdep does not report it, because path #2 actually holds a subclass of lo_ctl_mutex. This subclass seems creep into the code by mistake. The patch author actually just mentioned it in the changelog, see commit f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see: http://marc.info/?l=linux-kernel&m=123806169129727&w=2 Path #2 hold bd_mutex to call bd_set_size(), I've protected it with i_mutex in a previous patch, so drop bd_mutex at this site. Signed-off-by:
Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Acked-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Guo Chao authored
commit d646a02a upstream. blkdev_ioctl(GETBLKSIZE) uses i_size_read() to read size of block device. If we update block size directly, reader may see intermediate result in some machines and configurations. Use i_size_write() instead. Signed-off-by:
-
Ben Hutchings authored
Commit 3e78080f ('hwmon: (sht15) Check return value of regulator_enable()') depends on the use of devm_kmalloc() for automatic resource cleanup in the failure cases, which was introduced in 3.7. In older stable branches, explicit cleanup is needed. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Dmitry Rogozhkin authored
commit e79e0fe3 upstream. Subsequent threads returning EBUSY from vm_insert_pfn() was not handled correctly. As a result concurrent access from new threads to mmapped data caused SIGBUS. Note that this fixes i-g-t/tests/gem_threaded_tiled_access. Tested-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Eric Sandeen authored
commit bc178622 upstream. Doing this would reliably fail with -EBUSY for me: # mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2 ... unable to open /dev/sdb2: Device or resource busy because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it. Using systemtap to track bdev gets & puts shows a kworker thread doing a blkdev put after mkfs attempts a get; this is left over from the unmount path: btrfs_close_devices __btrfs_close_devices call_rcu(&device->rcu, free_device); free_device INIT_WORK(&device->rcu_work, __free_device); schedule_work(&device->rcu_work); so unmount might complete before __free_device fires & does its blkdev_put. Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait until all blkdev_put()s are done, and the device is truly free once unmount completes. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Heiko Carstens authored
commit f6a70a07 upstream. Our flush_tlb_kernel_range() implementation calls __tlb_flush_mm() with &init_mm as argument. __tlb_flush_mm() however will only flush tlbs for the passed in mm if its mm_cpumask is not empty. For the init_mm however its mm_cpumask has never any bits set. Which in turn means that our flush_tlb_kernel_range() implementation doesn't work at all. This can be easily verified with a vmalloc/vfree loop which allocates a page, writes to it and then frees the page again. A crash will follow almost instantly. To fix this remove the cpumask_empty() check in __tlb_flush_mm() since there shouldn't be too many mms with a zero mm_cpumask, besides the init_mm of course. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
David Rientjes authored
commit 6c4d3bc9 upstream. Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 2a6e06b2 upstream. Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by:
Parag Warudkar <parag.lkml@gmail.com> Signed-off-by:
-
Stephane Eranian authored
commit 1d9d8639 upstream. This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Shuah Khan <shuah.khan@hp.com> Signed-off-by:
-
Dan Carpenter authored
commit 4502403d upstream. The call tree here is: sk_clone_lock() <- takes bh_lock_sock(newsk); xfrm_sk_clone_policy() __xfrm_sk_clone_policy() clone_policy() <- uses GFP_ATOMIC for allocations security_xfrm_policy_clone() security_ops->xfrm_policy_clone_security() selinux_xfrm_policy_clone() Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit d63ac5f6 upstream. Commit 44ae3ab3 forgot to update the entry for the 970MP rev 1.0 processor when moving some CPU features bits to the MMU feature bit mask. This breaks booting on some rare G5 models using that chip revision. Reported-by:
Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Marcin Jurkowski authored
commit 9d1817ca upstream. On Sat, Mar 02, 2013 at 10:45:10AM +0100, Sven Geggus wrote: > This is the bad commit I found doing git bisect: > 04f482fa is the first bad commit > commit 04f482fa > Author: Patrick McHardy <kaber@trash.net> > Date: Mon Mar 28 08:39:36 2011 +0000 Good job. I was too lazy to bisect for bad commit;) Reading the code I found problematic kthread_should_stop call from netlink connector which causes the oops. After applying a patch, I've been testing owfs+w1 setup for nearly two days and it seems to work very reliable (no hangs, no memleaks etc). More detailed description and possible fix is given below: Function w1_search can be called from either kthread or netlink callback. While the former works fine, the latter causes oops due to kthread_should_stop invocation. This patch adds a check if w1_search is serving netlink command, skipping kthread_should_stop invocation if so. Signed-off-by:
Marcin Jurkowski <marcin1j@gmail.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: Josh Boyer <jwboyer@gmail.com> Tested-by:
Sven Geggus <lists@fuchsschwanzdomain.de> Signed-off-by:
-
Axel Lin authored
commit df069079 upstream. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Takashi Iwai authored
commit 66efdc71 upstream. snd_seq_timer_open() didn't catch the whole error path but let through if the timer id is a slave. This may lead to Oops by accessing the uninitialized pointer. BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 PGD 785cd067 PUD 76964067 PMD 0 Oops: 0002 [#4] SMP CPU 0 Pid: 4288, comm: trinity-child7 Tainted: G D W 3.9.0-rc1+ #100 Bochs Bochs RIP: 0010:[<ffffffff819b3477>] [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 RSP: 0018:ffff88006ece7d38 EFLAGS: 00010246 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007 FS: 00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290) Stack: 0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d 65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000 ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520 Call Trace: [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70 [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120 [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0 [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20 [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570 [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0 [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0 [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b Reported-and-tested-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 2431496f as it was applied incorrectly twice. Thanks to Jiri for pointing this out. Cc: Jiri Slaby <jslaby@suse.cz> Cc: Andrew Vagin <avagin@openvz.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastian Riemer authored
commit bbfa57c0 upstream. If an fsync occurs on a read-only array, we need to send a completion for the IO and may not increment the active IO count. Otherwise, we hit a bug trace and can't stop the MD array anymore. By advice of Christoph Hellwig we return success upon a flush request but we return -EROFS for other writes. We detect flush requests by checking if the bio has zero sectors. Signed-off-by:
Sebastian Riemer <sebastian.riemer@profitbricks.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: NeilBrown <neilb@suse.de> Reported-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Jiri Slaby authored
commit b81273a1 upstream. Now that login from util-linux is forced to drop all references to a TTY which it wants to hangup (to reach reference count 1) we are seeing issues with telnet. When login closes its last reference to the slave PTY, it also resets packet mode on the *master* side. And we have a race here. What telnet does is fork+exec of `login'. Then there are two scenarios: * `login' closes the slave TTY and resets thus master's packet mode, but even now telnet properly sets the mode, or * `telnetd' sets packet mode on the master, `login' closes the slave TTY and resets master's packet mode. The former case is OK. However the latter happens in much more cases, by the order of magnitude to be precise. So when one tries to login to such a messed telnet setup, they see the following: inux login: ogin incorrect Note the missing first letters -- telnet thinks it is still in the packet mode, so when it receives "linux login" from `login', it considers "l" as the type of the packet and strips it. SuS does not mention how the implementation should behave. Both BSDs I checked (Free and Net) do not reset the flag upon the last close. By this I am resurrecting an old bug, see References. We are hitting it regularly now, i.e. with updated util-linux, ergo login. Here, I am changing a behavior introduced back in 2.1 times. It would better have a long time testing before goes upstream. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Bryan Mason <bmason@redhat.com> References: https://lkml.org/lkml/2009/11/11/223 References: https://bugzilla.redhat.com/show_bug.cgi?id=504703 References: https://bugzilla.novell.com/show_bug.cgi?id=797042Signed-off-by:
-
Paul Bolle authored
commit 827aa0d3 upstream. This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at commit 2555e663 ("ARM: S5P64X0: Add UART serial support for S5P6450") - which added this typo - makes clear this should be CPU_S5P6450. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit 8d0c2d10 upstream. ext3_msg() takes the printk prefix as the second parameter and the format string as the third parameter. Two callers of ext3_msg omit the prefix and pass the format string as the second parameter and the first parameter to the format string as the third parameter. In both cases this string comes from an arbitrary source. Which means the string may contain format string characters, which will lead to undefined and potentially harmful behavior. The issue was introduced in commit 4cf46b67("ext3: Unify log messages in ext3") and is fixed by this patch. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Kees Cook authored
commit 2ca39528 upstream. When the new signal handlers are set up, the location of sa_restorer is not cleared, leaking a parent process's address space location to children. This allows for a potential bypass of the parent's ASLR by examining the sa_restorer value returned when calling sigaction(). Based on what should be considered "secret" about addresses, it only matters across the exec not the fork (since the VMAs haven't changed until the exec). But since exec sets SIG_DFL and keeps sa_restorer, this is where it should be fixed. Given the few uses of sa_restorer, a "set" function was not written since this would be the only use. Instead, we use __ARCH_HAS_SA_RESTORER, as already done in other places. Example of the leak before applying this patch: $ cat /proc/$$/maps ... 7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... $ ./leak ... 7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... 1 0 (nil) 0x7fb9f30b94a0 2 4000000 (nil) 0x7f278bcaa4a0 3 4000000 (nil) 0x7f278bcaa4a0 4 0 (nil) 0x7fb9f30b94a0 ... [akpm@linux-foundation.org: use SA_RESTORER for backportability] Signed-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by:
-
Malcolm Priestley authored
commit 6987a6da upstream. Remove usb_put_dev from vt6656_suspend and usb_get_dev from vt6566_resume. These are not normally in suspend/resume functions. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Alan Stern authored
commit feca7746 upstream. This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Reported-and-tested-by:
Stephen Thirlwall <sdt@dr.com> Signed-off-by:
-
Bjørn Mork authored
commit ab4b7164 upstream. This reverts commit 200e0d99 ("USB: storage: optimize to match the Huawei USB storage devices and support new switch command" and the followup bugfix commit cd060956 ("USB: storage: properly handle the endian issues of idProduct"). The commit effectively added a large number of Huawei devices to the deprecated usb-storage mode switching logic. Many of these devices have been in use and supported by the userspace usb_modeswitch utility for years. Forcing the switching inside the kernel causes a number of regressions as a result of ignoring existing onfigurations, and also completely takes away the ability to configure mode switching per device/system/user. Known regressions caused by this: - Some of the devices support multiple modes, using different switching commands. There are existing configurations taking advantage of this. - There is a real use case for disabling mode switching and instead mounting the exposed storage device. This becomes impossible with switching logic inside the usb-storage driver. - At least on device fail as a result of the usb-storage switching command, becoming completely unswitchable. This is possibly a firmware bug, but still a regression because the device work as expected using usb_modeswitch defaults. In-kernel mode switching was deprecated years ago with the development of the more user friendly userspace alternatives. The existing list of devices in usb-storage was only kept to prevent breaking already working systems. The long term plan is to remove the list, not to add to it. Ref: http://permalink.gmane.org/gmane.linux.usb.general/28543Signed-off-by:
Bjørn Mork <bjorn@mork.no> Cc: <fangxiaozhi@huawei.com> Signed-off-by:
-
Steve Conklin authored
commit a57e82a1 upstream. The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by:
Steve Conklin <sconklin@canonical.com> Signed-off-by:
-
Christian Schmiedl authored
commit 1941138e upstream. add support for Cinterion's products AH6 and PLS8 by adding Product IDs and USB_DEVICE tuples. Signed-off-by:
Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by:
-
Matwey V. Kornilov authored
commit be3101c2 upstream. This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by:
Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by:
-
Oliver Neukum authored
commit c0f5ecee upstream. The buffer for responses must not overflow. If this would happen, set a flag, drop the data and return an error after user space has read all remaining data. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Bjørn Mork authored
commit daec90e7 upstream. Another device using CDC ACM with vendor specific protocol to mark serial functions. Signed-off-by:
-
Amit Shah authored
commit e84e7a56 upstream. The code currently only supports one virtio-rng device at a time. Invoking guests with multiple devices causes the guest to blow up. Check if we've already registered and initialised the driver. Also cleanup in case of registration errors or hot-unplug so that a new device can be used. Reported-by:
Peter Krempa <pkrempa@redhat.com> Reported-by: <yunzheng@redhat.com> Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Dan Williams authored
commit 2d90e636 upstream. 4 ports; AT/PPP is standard CDC-ACM. The other three (added by this patch) are QCDM/DIAG, possibly GPS, and unknown. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
- 14 Mar, 2013 5 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
commit a40e7cf8 upstream. Commit 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") hoisted the check for "_DMI_" into dmi_scan_machine(), which means that we don't bother to check for "_DMI_" at offset 16 in an SMBIOS entry. smbios_present() may also call dmi_present() for an address where we found "_SM_", if it failed further validation. Check for "_DMI_" in smbios_present() before calling dmi_present(). [akpm@linux-foundation.org: fix build] Signed-off-by:
Tim McGrath <tmhikaru@gmail.com> Tested-by:
-
Eric W. Biederman authored
When decnet is built as a module a simple: echo 0.0 >/proc/sys/net/decnet/node_address results in most of the sysctl entries under /proc/sys/net/decnet and /proc/sys/net/decnet/conf disappearing. For more details see http://www.spinics.net/lists/netdev/msg226123.html. This change applies the same workaround used in net/core/sysctl_net_core.c and net/ipv6/sysctl_net_ipv6.c of creating a skeleton of decnet sysctl entries before doing anything else. The problem first appeared in kernel 2.6.27. The later rewrite of sysctl in kernel 3.4 restored the previous behavior and eliminated the need for this workaround. This patch was heavily inspired by a similar but more complex patch by Larry Baker. Reported-by:
Larry Baker <baker@usgs.gov> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
David Miller <davem@redhat.com> Signed-off-by:
-
Steven Rostedt authored
commit db05021d upstream. The prompt to enable DYNAMIC_FTRACE (the ability to nop and enable function tracing at run time) had a confusing statement: "enable/disable ftrace tracepoints dynamically" This was written before tracepoints were added to the kernel, but now that tracepoints have been added, this is very confusing and has confused people enough to give wrong information during presentations. Not only that, I looked at the help text, and it still references that dreaded daemon that use to wake up once a second to update the nop locations and brick NICs, that hasn't been around for over five years. Time to bring the text up to the current decade. Reported-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Tu, Xiaobing authored
commit e3773677 upstream. When system enters sleep, non-boot CPUs will be disabled. Cpufreq stats sysfs is created when the CPU is up, but it is not freed when the CPU is going down. This will cause memory leak. Signed-off-by:
xiaobing tu <xiaobing.tu@intel.com> Signed-off-by:
guifang tang <guifang.tang@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Colin Cross <ccross@google.com> Signed-off-by:
-
