- 02 Jan, 2018 2 commits
-
-
Steven Rostedt (VMware) authored
commit 4397f045 upstream. Jing Xia and Chunyan Zhang reported that on failing to allocate part of the tracing buffer, memory is freed, but the pointers that point to them are not initialized back to NULL, and later paths may try to free the freed memory again. Jing and Chunyan fixed one of the locations that does this, but missed a spot. Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Reported-by:
Jing Xia <jing.xia@spreadtrum.com> Reported-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 6b7e633f upstream. The ring_buffer_read_page() takes care of zeroing out any extra data in the page that it returns. There's no need to zero it out again from the consumer. It was removed from one consumer of this function, but read_buffers_splice_read() did not remove it, and worse, it contained a nasty bug because of it. Fixes: 2711ca23 ("ring-buffer: Move zeroing out excess in page to ring buffer code") Signed-off-by:
-
- 29 Dec, 2017 38 commits
-
-
Greg Kroah-Hartman authored
-
John Einar Reitan authored
This reverts commit c97e4107, which incorrectly was taken from upstream c0a32fe1. The referenced memory leak doesn't exist on the 4.14 stable branch as the new logic of doing the kzalloc hasn't moved to this function. By adding this kfree we actually end up doing double kfree as all callers of smi_add does a kfree on error. Sample with SLAB_FREELIST_HARDENED=y: ipmi_si: Adding ACPI-specified kcs state machine IPMI System Interface driver. ipmi_si: probing via SPMI ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 (NULL device *): SPMI-specified kcs state machine: duplicate ------------[ cut here ]------------ kernel BUG at mm/slub.c:295! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.8-gentoo-r1 #5 Hardware name: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2 02/20/2015 task: ffff88080c208000 task.stack: ffffc90000020000 RIP: 0010:kfree+0xf5/0x157 RSP: 0000:ffffc90000023e58 EFLAGS: 00010246 RAX: ffff88080b2e6200 RBX: ffff88080b2e6200 RCX: ffff88080b2e6200 RDX: 000000000000008e RSI: ffff88082fc1cd60 RDI: ffff88080c003080 RBP: ffffc90000002808 R08: 000000000001cd60 R09: ffffffff814da10e R10: ffffea00202cb980 R11: 000000000000005c R12: ffffffff814da10e R13: 00000000ffffffed R14: ffffffff82317bd0 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff88082fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000002e09001 CR4: 00000000001606f0 Call Trace: init_ipmi_si+0x493/0x5c7 ? cleanup_ipmi_si+0x84/0x84 ? set_debug_rodata+0xc/0xc ? kthread+0x4c/0x11c do_one_initcall+0x94/0x13d ? set_debug_rodata+0xc/0xc kernel_init_freeable+0x112/0x18e ? rest_init+0xa0/0xa0 kernel_init+0x5/0xe1 ret_from_fork+0x22/0x30 Code: 24 18 49 8b 7a 30 48 8b 37 65 48 8b 56 08 65 48 03 35 3a 29 e2 7e 4c 3b 56 10 75 39 48 8b 0e 48 63 47 20 48 01 d8 48 39 cb 75 02 <0f> 0b 49 89 c0 4c 33 87 40 01 00 00 4c 31 c1 48 89 08 48 8d 4a ---[ end trace 4ac2e2c100842676 ]--- Signed-off-by:
John Einar Reitan <john.einar@gmail.com> Signed-off-by:
-
Yelena Krivosheev authored
commit 2eecb2e0 upstream. There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by:
Yelena Krivosheev <yelena@marvell.com> Tested-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yelena Krivosheev authored
commit ca5902a6 upstream. When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Fixes: 2dcf75e2 ("net: mvneta: Associate RX queues with each CPU") Signed-off-by:
-
Yelena Krivosheev authored
commit 4423c18e upstream. When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
-
Dan Williams authored
commit 19deaa21 upstream. The alignment checks at pfn driver startup fail to properly account for the 'start_pad' in the case where the namespace is misaligned relative to its internal alignment. This is typically triggered in 1G aligned namespace, but could theoretically trigger with small namespace alignments. When this triggers the kernel reports messages of the form: dax2.1: bad offset: 0x3c000000 dax disabled align: 0x40000000 Fixes: 1ee6667c ("libnvdimm, pfn, dax: fix initialization vs autodetect...") Reported-by:
Jane Chu <jane.chu@oracle.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Vishal Verma authored
commit 24e3a7fb upstream. Due to a spec misinterpretation, the Linux implementation of the BTT log area had different padding scheme from other implementations, such as UEFI and NVML. This fixes the padding scheme, and defaults to it for new BTT layouts. We attempt to detect the padding scheme in use when probing for an existing BTT. If we detect the older/incompatible scheme, we continue using it. Reported-by:
Juston Li <juston.li@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Fixes: 5212e11f ("nd_btt: atomic sector updates") Signed-off-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
-
Dan Williams authored
commit 41fce90f upstream. The following namespace configuration attempt: # ndctl create-namespace -e namespace0.0 -m devdax -a 1G -f libndctl: ndctl_dax_enable: dax0.1: failed to enable Error: namespace0.0: failed to enable failed to reconfigure namespace: No such device or address ...fails when the backing memory range is not physically aligned to 1G: # cat /proc/iomem | grep Persistent 210000000-30fffffff : Persistent Memory (legacy) In the above example the 4G persistent memory range starts and ends on a 256MB boundary. We handle this case correctly when needing to handle cases that violate section alignment (128MB) collisions against "System RAM", and we simply need to extend that padding/truncation for the 1GB alignment use case. Fixes: 315c5625 ("libnvdimm, pfn: add 'align' attribute...") Reported-and-tested-by:
-
Maxime Ripard authored
commit 92411f6d upstream. The commit 4c7f16d1 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") moved a bunch of logic around, but forgot to update the gotos after the introduction of the err_free_dotclock label. It means that if we fail later that the one introduced in that commit, we'll just to the old label which isn't free the clock we created. This will result in a breakage as soon as someone tries to do something with that clock, since its resources will have been long reclaimed. Fixes: 4c7f16d1 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/f83c1cebc731f0b4251f5ddd7b38c718cd79bb0b.1512662253.git-series.maxime.ripard@free-electrons.comSigned-off-by:
-
Chris Wilson authored
commit 2797c4a1 upstream. From the shrinker paths, we want to relinquish the GPU and GGTT access to the object, releasing the backing storage back to the system for swapout. As a part of that process we would unpin the pages, marking them for access by the CPU (for the swapout/swapin). However, if that process was interrupted after unbind the vma, we missed a flush of the inflight GGTT writes before we made that GTT space available again for reuse, with the prospect that we would redirect them to another page. The bug dates back to the introduction of multiple GGTT vma, but the code itself dates to commit 02bef8f9 ("drm/i915: Unbind closed vma for i915_gem_object_unbind()"). Fixes: 02bef8f9 ("drm/i915: Unbind closed vma for i915_gem_object_unbind()") Fixes: c5ad54cf ("drm/i915: Use partial view in mmap fault handler") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171204132513.7303-1-chris@chris-wilson.co.uk (cherry picked from commit 5888fc9e) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ravi Bangoria authored
commit f41d84dd upstream. It's theoretically possible that branch instructions recorded in BHRB (Branch History Rolling Buffer) entries have already been unmapped before they are processed by the kernel. Hence, trying to dereference such memory location will result in a crash. eg: Unable to handle kernel paging request for data at address 0xd000000019c41764 Faulting instruction address: 0xc000000000084a14 NIP [c000000000084a14] branch_target+0x4/0x70 LR [c0000000000eb828] record_and_restart+0x568/0x5c0 Call Trace: [c0000000000eb3b4] record_and_restart+0xf4/0x5c0 (unreliable) [c0000000000ec378] perf_event_interrupt+0x298/0x460 [c000000000027964] performance_monitor_exception+0x54/0x70 [c000000000009ba4] performance_monitor_common+0x114/0x120 Fix it by deferefencing the addresses safely. Fixes: 69123184 ("powerpc/perf: Fix setting of "to" addresses for BHRB") Suggested-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Chen-Yu Tsai authored
commit 61d2f2a0 upstream. Our MMC host driver now issues a reset, instead of just deasserting the reset control, since commit c34eda69 ("mmc: sunxi: Reset the device at probe time"). The sun9i-mmc clock driver does not support this, and will fail, which results in MMC not probing. This patch implements the reset callback by asserting the reset control, then deasserting it after a small delay. Fixes: 7a6fca87 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20171218035751.20661-1-wens@csie.org Signed-off-by:
-
Paolo Bonzini authored
commit fae1a3e7 upstream. rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then CR4 & ~PCIDE, then CR0, then CR4. However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier in the long run to replace rsm_enter_protected_mode() with an emulator callback that sets all the special registers (like KVM_SET_SREGS would do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1. Reported-by:
Laszlo Ersek <lersek@redhat.com> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Wanpeng Li authored
commit d73235d1 upstream. *** Guest State *** CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 CR3 = 0x00000000fffbc000 RSP = 0x0000000000000000 RIP = 0x0000000000000000 RFLAGS=0x00000000 DR7 = 0x0000000000000400 ^^^^^^^^^^ The failed vmentry is triggered by the following testcase when ept=Y: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_regs regs = { .rflags = 0, }; ioctl(r[4], KVM_SET_REGS, ®s); ioctl(r[4], KVM_RUN, 0); } X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1 of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails. This patch fixes it by oring X86_EFLAGS_FIXED during ioctl. Suggested-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Quan Xu <quan.xu0@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Wanpeng Li authored
commit ed52870f upstream. The below test case can cause infinite loop in kvm when ept=0. #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); ioctl(r[4], KVM_RUN, 0); } It doesn't setup the memory regions, mmu_alloc_shadow/direct_roots() in kvm return 1 when kvm fails to allocate root page table which can result in beblow infinite loop: vcpu_run() { for (;;) { r = vcpu_enter_guest()::kvm_mmu_reload() returns 1 if (r <= 0) break; if (need_resched()) cond_resched(); } } This patch fixes it by returning -ENOSPC when there is no available kvm mmu page for root page table. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Fixes: 26eeb53c (KVM: MMU: Bail out immediately if there is no available mmu page) Signed-off-by:
-
Laurent Vivier authored
commit 7333b5ac upstream. When we migrate a VM from a POWER8 host (XICS) to a POWER9 host (XICS-on-XIVE), we have an error: qemu-kvm: Unable to restore KVM interrupt controller state \ (0xff000000) for CPU 0: Invalid argument This is because kvmppc_xics_set_icp() checks the new state is internaly consistent, and especially: ... 1129 if (xisr == 0) { 1130 if (pending_pri != 0xff) 1131 return -EINVAL; ... On the other side, kvmppc_xive_get_icp() doesn't set neither the pending_pri value, nor the xisr value (set to 0) (and kvmppc_xive_set_icp() ignores the pending_pri value) As xisr is 0, pending_pri must be set to 0xff. Fixes: 5af50993 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Cédric Le Goater authored
commit dc1c4165 upstream. When restoring a pending interrupt, we are setting the Q bit to force a retrigger in xive_finish_unmask(). But we also need to force an EOI in this case to reach the same initial state : P=1, Q=0. This can be done by not setting 'old_p' for pending interrupts which will inform xive_finish_unmask() that an EOI needs to be sent. Fixes: 5af50993 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Suggested-by:
Cédric Le Goater <clg@kaod.org> Reviewed-by:
-
Marc Zyngier authored
commit 7839c672 upstream. When we unmap the HYP memory, we try to be clever and unmap one PGD at a time. If we start with a non-PGD aligned address and try to unmap a whole PGD, things go horribly wrong in unmap_hyp_range (addr and end can never match, and it all goes really badly as we keep incrementing pgd and parse random memory as page tables...). The obvious fix is to let unmap_hyp_range do what it does best, which is to iterate over a range. The size of the linear mapping, which begins at PAGE_OFFSET, can be easily calculated by subtracting PAGE_OFFSET form high_memory, because high_memory is defined as the linear map address of the last byte of DRAM, plus one. The size of the vmalloc region is given trivially by VMALLOC_END - VMALLOC_START. Reported-by:
Andre Przywara <andre.przywara@arm.com> Tested-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Julien Thierry authored
commit bfe766cf upstream. When VHE is not present, KVM needs to save and restores PMSCR_EL1 when possible. If SPE is used by the host, value of PMSCR_EL1 cannot be saved for the guest. If the host starts using SPE between two save+restore on the same vcpu, restore will write the value of PMSCR_EL1 read during the first save. Make sure __debug_save_spe_nvhe clears the value of the saved PMSCR_EL1 when the guest cannot use SPE. Signed-off-by:
Julien Thierry <julien.thierry@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
-
Mika Westerberg authored
commit d2b3c353 upstream. Guenter Roeck reported an interrupt storm on a prototype system which is based on Cyan Chromebook. The root cause turned out to be a incorrectly configured pin that triggers spurious interrupts. This will be fixed in coreboot but currently we need to prevent the interrupt storm from happening by masking all interrupts (but not GPEs) on those systems. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Fixes: bcb48cca ("pinctrl: cherryview: Do not mask all interrupts in probe") Reported-and-tested-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Maxime Chevallier authored
commit 251c201b upstream. The Armada 3700 SPI controller has 2 ranges of prescaler coefficients. One ranging from 0 to 15 by steps of 1, and one ranging from 0 to 30 by steps of 2. This commit fixes the prescaler coefficients that are over 15 so that it uses the correct range of values. The prescaling coefficient is rounded to the upper value if it is odd. This was tested on Espressobin with spidev and a locigal analyser. Signed-off-by:
Maxime Chevallier <maxime.chevallier@smile.fr> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 5a1314fa upstream. When the core is configured in C_SPI_MODE > 0, it integrates a lookup table that automatically configures the core in dual or quad mode based on the command (first byte on the tx fifo). Unfortunately, that list mode_?_memoy_*.mif does not contain all the supported commands by the flash. Since 4.14 spi-nor automatically tries to probe the flash using SFDP (command 0x5a), and that command is not part of the list_mode table. Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads into a stall that can only be recovered with a soft rest. This patch detects this kind of stall and returns -EIO to the caller on those commands. spi-nor can handle this error properly: m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404 m25p80 spi0.0: SPI transfer failed: -5 spi_master spi0: failed to transfer one message from queue m25p80 spi0.0: s25sl064p (8192 Kbytes) Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
John David Anglin authored
commit 9352aead upstream. This reverts commit 5c38602d. Interrupts can't be enabled early because the register saves are done on the thread stack prior to switching to the IRQ stack. This caused stack overflows and the thread stack needed increasing to 32k. Even then, stack overflows still occasionally occurred. Background: Even with a 32 kB thread stack, I have seen instances where the thread stack overflowed on the mx3210 buildd. Detection of stack overflow only occurs when we have an external interrupt. When an external interrupt occurs, we switch to the thread stack if we are not already on a kernel stack. Then, registers and specials are saved to the kernel stack. The bug occurs in intr_return where interrupts are reenabled prior to returning from the interrupt. This was done incase we need to schedule or deliver signals. However, it introduces the possibility that multiple external interrupts may occur on the thread stack and cause a stack overflow. These might not be detected and cause the kernel to misbehave in random ways. This patch changes the code back to only reenable interrupts when we are going to schedule or deliver signals. As a result, we generally return from an interrupt before reenabling interrupts. This minimizes the growth of the thread stack. Fixes: 5c38602d ("parisc: Re-enable interrupts early") Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit bcf3f175 upstream. Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by:
-
Helge Deller authored
commit 203c110b upstream. Static analysis tools complain that we intended to have curly braces around this indent block. In this case this assumption is wrong, so fix the indenting. Fixes: 2f3c7b81 ("parisc: Add core code for self-extracting kernel") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Helge Deller authored
commit 0ed9d3de upstream. The os_hpmc_size variable sometimes wasn't aligned at word boundary and thus triggered the unaligned fault handler at startup. Fix it by aligning it properly. Signed-off-by:
-
Shaohua Li authored
commit 111be883 upstream. If a bio is throttled and split after throttling, the bio could be resubmited and enters the throttling again. This will cause part of the bio to be charged multiple times. If the cgroup has an IO limit, the double charge will significantly harm the performance. The bio split becomes quite common after arbitrary bio size change. To fix this, we always set the BIO_THROTTLED flag if a bio is throttled. If the bio is cloned/split, we copy the flag to new bio too to avoid a double charge. However, cloned bio could be directed to a new disk, keeping the flag be a problem. The observation is we always set new disk for the bio in this case, so we can clear the flag in bio_set_dev(). This issue exists for a long time, arbitrary bio size change just makes it worse, so this should go into stable at least since v4.2. V1-> V2: Not add extra field in bio based on discussion with Tejun Cc: Vivek Goyal <vgoyal@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jens Axboe authored
commit 4ccafe03 upstream. A previous change blindly added massive alignment to the call_single_data structure in struct request. This ballooned it in size from 296 to 320 bytes on my setup, for no valid reason at all. Use the unaligned struct __call_single_data variant instead. Fixes: 966a9671 ("smp: Avoid using two cache lines for struct call_single_data") Signed-off-by:
-
Rafael J. Wysocki authored
commit 5839ee73 upstream. It is incorrect to call pci_restore_state() for devices in low-power states (D1-D3), as that involves the restoration of MSI setup which requires MMIO to be operational and that is only the case in D0. However, pci_pm_thaw_noirq() may do that if the driver's "freeze" callbacks put the device into a low-power state, so fix it by making it force devices into D0 via pci_set_power_state() instead of trying to "update" their power state which is pointless. Fixes: e60514bd (PCI/PM: Restore the status of PCI devices across hibernation) Reported-by:
Thomas Gleixner <tglx@linutronix.de> Reported-by:
Maarten Lankhorst <dev@mblankhorst.nl> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 5a15f289 upstream. The commit 89b89d12 ("ALSA: usb-audio: Add check return value for usb_string()") added the check of the return value from snd_usb_copy_string_desc(), which is correct per se, but it introduced a regression. In the original code, either the "Clock Source", "Playback Source" or "Capture Source" suffix is added after the terminal string, while the commit changed it to add the suffix only when get_term_name() is failing. It ended up with an incorrect ctl name like "PCM" instead of "PCM Capture Source". Also, even the original code has a similar bug: when the ctl name is generated from snd_usb_copy_string_desc() for the given iSelector, it also doesn't put the suffix. This patch addresses these issues: the suffix is added always when no static mapping is found. Also the patch tries to put more comments and cleans up the if/else block for better readability in order to avoid the same pitfall again. Fixes: 89b89d12 ("ALSA: usb-audio: Add check return value for usb_string()") Reported-and-tested-by:
Mauro Santos <registo.mailling@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jussi Laako authored
commit 866f7ed7 upstream. Adds VID:PID of Esoteric D-05X to the TEAC device id's. Renames the is_teac_50X_dac() function to is_teac_dsd_dac() to cover broader device family from the same corporation sharing the same USB audio implementation. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
-
Guneshwor Singh authored
commit 2b4584d0 upstream. Cannonlake HDMI codec has the same nid as Geminilake. This adds the codec entry for it. Signed-off-by:
Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by:
-
Kailang Yang authored
commit 92266651 upstream. Dell AIO had LineOut jack. Add LineOut verb into this patch. [ Additional notes: the ALC274 codec seems requiring the fixed pin / DAC connections for HP / line-out pins for enabling EQ for speakers; i.e. the HP / LO pins expect to be connected with NID 0x03 while keeping the speaker with NID 0x02. However, by adding a new line-out pin, the auto-parser assigns the NID 0x02 for HP/LO pins as primary outputs. As an easy workaround, we provide the preferred_pairs[] to map forcibly for these pins. -- tiwai ] Fixes: 75ee94b2 ("ALSA: hda - fix headset mic problem for Dell machines with alc274") Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Takashi Iwai authored
commit c1cfd902 upstream. The rawmidi also allows to obtaining the information via ioctl of ctl API. It means that user can issue an ioctl to the rawmidi device even when it's being removed as long as the control device is present. Although the code has some protection via the global register_mutex, its range is limited to the search of the corresponding rawmidi object, and the mutex is already unlocked at accessing the rawmidi object. This may lead to a use-after-free. For avoiding it, this patch widens the application of register_mutex to the whole snd_rawmidi_info_select() function. We have another mutex per rawmidi object, but this operation isn't very hot path, so it shouldn't matter from the performance POV. Signed-off-by:
-
Johan Hovold authored
commit 85e9b13c upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Fixes: 37e13cec ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6a ("mfd: Fix twl6040 build failure") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 0a423772 upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b ("mfd: twl4030-audio: Add DT support") Signed-off-by:
-
Jon Hunter authored
commit 15d83748 upstream. On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
-
Stephan Mueller authored
commit d53c5135 upstream. When invoking an asynchronous cipher operation, the invocation of the callback may be performed before the subsequent operations in the initial code path are invoked. The callback deletes the cipher request data structure which implies that after the invocation of the asynchronous cipher operation, this data structure must not be accessed any more. The setting of the return code size with the request data structure must therefore be moved before the invocation of the asynchronous cipher operation. Fixes: e870456d ("crypto: algif_skcipher - overhaul memory management") Fixes: d887c52d ("crypto: algif_aead - overhaul memory management") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
