- 25 Feb, 2019 40 commits
-
-
Anand Jain authored
Support for a new command that can be used eg. as a command $ btrfs device scan --forget [dev]' (the final name may change though) to undo the effects of 'btrfs device scan [dev]'. For this purpose this patch proposes to use ioctl #5 as it was empty and is next to the SCAN ioctl. The new ioctl BTRFS_IOC_FORGET_DEV works only on the control device (/dev/btrfs-control) to unregister one or all devices, devices that are not mounted. The argument is struct btrfs_ioctl_vol_args, ::name specifies the device path. To unregister all device, the path is an empty string. Again, the devices are removed only if they aren't part of a mounte filesystem. This new ioctl provides: - release of unwanted btrfs_fs_devices and btrfs_devices structures from memory if the device is not going to be mounted - ability to mount filesystem in degraded mode, when one devices is corrupted like in split brain raid1 - running test cases which would require reloading the kernel module but this is not possible eg. due to mounted filesystem or built-in Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by:
-
Josef Bacik authored
The throttle path doesn't take cleaner_delayed_iput_mutex, which means we could think we're done flushing iputs in the data space reservation path when we could have a throttler doing an iput. There's no real reason to serialize the delayed iput flushing, so instead of taking the cleaner_delayed_iput_mutex whenever we flush the delayed iputs just replace it with an atomic counter and a waitqueue. This removes the short (or long depending on how big the inode is) window where we think there are no more pending iputs when there really are some. The waiting is killable as it could be indirectly called from user operations like fallocate or zero-range. Such call sites should handle the error but otherwise it's not necessary. Eg. flush_space just needs to attempt to make space by waiting on iputs. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> [ add killable comment and changelog parts ] Signed-off-by:
-
Qu Wenruo authored
Since inc_block_group_ro() would return -ENOSPC, outputting debug info for enospc_debug mount option would be helpful to debug some balance false ENOSPC report. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
Inside qgroup_rsv_add/release(), we have trace events trace_qgroup_update_reserve() to catch reserved space update. However we still have two manual trace_qgroup_update_reserve() calls just outside these functions. Remove these duplicated calls. Fixes: 64ee4e75 ("btrfs: qgroup: Update trace events to use new separate rsv types") Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Anders Roxell authored
A compiler warning (in a patch in development) pointed to a variable that was used only inside and ASSERT: u64 root_objectid = root->root_key.objectid; ASSERT(root_objectid == ...); fs/btrfs/relocation.c: In function ‘insert_dirty_subv’: fs/btrfs/relocation.c:2138:6: warning: unused variable ‘root_objectid’ [-Wunused-variable] u64 root_objectid = root->root_key.objectid; ^~~~~~~~~~~~~ When CONFIG_BRTFS_ASSERT isn't enabled, variable root_objectid isn't used. Rework the assertion helper by adding a runtime check instead of the '#ifdef CONFIG_BTRFS_ASSERT #else ...", so the compiler sees the condition being passed into an inline function after preprocessing. Signed-off-by:Anders Roxell <anders.roxell@linaro.org> Reviewed-by:
-
David Sterba authored
The last caller that does not have a fixed value of lock is btrfs_set_path_blocking, that actually does the same conditional swtich by the lock type so we can merge the branches together and remove the helper. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
David Sterba authored
Currently, the number of readers and writers is checked and in case there are any, wait and redo the locks. There's some duplication before the branches go back to again label, eg. calling wait_event on blocking_readers twice. The sequence is transformed loop: * wait for readers * wait for writers * write_lock * check readers, unlock and wait for readers, loop * check writers, unlock and wait for writers, loop The new sequence is not exactly the same due to the simplification, for readers it's slightly faster. For the writers, original code does * wait for writers * (loop) wait for readers * wait for writers -- again while the new goes directly to the reader check. This should behave the same on a contended lock with multiple writers and readers, but can reduce number of times we're waiting on something. Reviewed-by:
-
David Sterba authored
btrfs_set_lock_blocking is now only a simple wrapper around btrfs_set_lock_blocking_write. The name does not bring any semantic value that could not be inferred from the new function so there's no point keeping it. Reviewed-by:
-
David Sterba authored
We can use the right helper where the lock type is a fixed parameter. Reviewed-by:
-
David Sterba authored
There are many callers that hardcode the desired lock type so we can avoid the switch and call them directly. Split the current function to two. There are no remaining users of btrfs_clear_lock_blocking_rw so it's removed. The call sites will be converted in followup patches. Reviewed-by:
-
David Sterba authored
There are many callers that hardcode the desired lock type so we can avoid the switch and call them directly. Split the current function to two but leave a helper that still takes the variable lock type to make current code compile. The call sites will be converted in followup patches. Reviewed-by:
-
Qu Wenruo authored
Since it's replaced by new delayed subtree swap code, remove the original code. The cleanup is small since most of its core function is still used by delayed subtree swap trace. Signed-off-by:
-
Qu Wenruo authored
Before this patch, qgroup code traces the whole subtree of subvolume and reloc trees unconditionally. This makes qgroup numbers consistent, but it could cause tons of unnecessary extent tracing, which causes a lot of overhead. However for subtree swap of balance, just swap both subtrees because they contain the same contents and tree structure, so qgroup numbers won't change. It's the race window between subtree swap and transaction commit could cause qgroup number change. This patch will delay the qgroup subtree scan until COW happens for the subtree root. So if there is no other operations for the fs, balance won't cause extra qgroup overhead. (best case scenario) Depending on the workload, most of the subtree scan can still be avoided. Only for worst case scenario, it will fall back to old subtree swap overhead. (scan all swapped subtrees) [[Benchmark]] Hardware: VM 4G vRAM, 8 vCPUs, disk is using 'unsafe' cache mode, backing device is SAMSUNG 850 evo SSD. Host has 16G ram. Mkfs parameter: --nodesize 4K (To bump up tree size) Initial subvolume contents: 4G data copied from /usr and /lib. (With enough regular small files) Snapshots: 16 snapshots of the original subvolume. each snapshot has 3 random files modified. balance parameter: -m So the content should be pretty similar to a real world root fs layout. And after file system population, there is no other activity, so it should be the best case scenario. | v4.20-rc1 | w/ patchset | diff ----------------------------------------------------------------------- relocated extents | 22615 | 22457 | -0.1% qgroup dirty extents | 163457 | 121606 | -25.6% time (sys) | 22.884s | 18.842s | -17.6% time (real) | 27.724s | 22.884s | -17.5% Signed-off-by: -
Qu Wenruo authored
To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: -
Qu Wenruo authored
Refactor btrfs_qgroup_trace_subtree_swap() into qgroup_trace_subtree_swap(), which only needs two extent buffer and some other bool to control the behavior. This provides the basis for later delayed subtree scan work. Signed-off-by:
-
Qu Wenruo authored
Relocation code will drop btrfs_root::reloc_root as soon as merge_reloc_root() finishes. However later qgroup code will need to access btrfs_root::reloc_root after merge_reloc_root() for delayed subtree rescan. So alter the timming of resetting btrfs_root:::reloc_root, make it happens after transaction commit. With this patch, we will introduce a new btrfs_root::state, BTRFS_ROOT_DEAD_RELOC_TREE, to info part of btrfs_root::reloc_tree user that although btrfs_root::reloc_tree is still non-NULL, but still it's not used any more. The lifespan of btrfs_root::reloc tree will become: Old behavior | New ------------------------------------------------------------------------ btrfs_init_reloc_root() --- | btrfs_init_reloc_root() --- set reloc_root | | set reloc_root | | | | | | | merge_reloc_root() | | merge_reloc_root() | |- btrfs_update_reloc_root() --- | |- btrfs_update_reloc_root() -+- clear btrfs_root::reloc_root | set ROOT_DEAD_RELOC_TREE | | record root into dirty | | roots rbtree | | | | reloc_block_group() Or | | btrfs_recover_relocation() | | | After transaction commit | | |- clean_dirty_subvols() --- | clear btrfs_root::reloc_root During ROOT_DEAD_RELOC_TREE set lifespan, the only user of btrfs_root::reloc_tree should be qgroup. Since reloc root needs a longer life-span, this patch will also delay btrfs_drop_snapshot() call. Now btrfs_drop_snapshot() is called in clean_dirty_subvols(). This patch will increase the size of btrfs_root by 16 bytes. Signed-off-by: -
Josef Bacik authored
The first thing we do is loop through the list, this if (!list_empty()) btrfs_create_pending_block_groups(); thing is just wasted space. Reviewed-by:
-
Josef Bacik authored
Instead of open coding this stuff use the helper instead. Reviewed-by:
-
Josef Bacik authored
We have this open coded in btrfs_destroy_delayed_refs, use the helper instead. Reviewed-by:
-
Anand Jain authored
The kernel log messages help debugging and audit, add them for scrub Signed-off-by:
-
David Sterba authored
The workqueue name is constructed from a format string but the prefix does not need to be set by %s. Reviewed-by:
-
Anand Jain authored
Both btrfs_find_device() and find_device() does the same thing except that the latter does not take the seed device onto account in the device scanning context. We can merge them. Signed-off-by:
-
Anand Jain authored
Preparatory patch to add ioctl that allows to forget a device (ie. reverse of scan). Refactors btrfs_free_stale_devices() to obtain return status. As this function can fail if it can't find the given path (returns -ENOENT) or trying to delete a mounted device (returns -EBUSY). Signed-off-by:
-
Anand Jain authored
btrfs_find_device() accepts fs_info as an argument and retrieves fs_devices from fs_info. Instead use fs_devices, so that this function can be used in non-mount (during device scanning) context as well. Signed-off-by:
-
Anand Jain authored
btrfs_find_device_by_devspec() finds the device by @devid or by @device_path. This patch makes code flow easy to read by open coding the else part and renames devpath to device_path. Signed-off-by:
-
Anand Jain authored
btrfs_find_device_missing_or_by_path() is relatively small function, and its only parent btrfs_find_device_by_devspec() is small as well. Besides there are a number of find_device functions. Merge btrfs_find_device_missing_or_by_path() into its parent. Signed-off-by:
-
Nikolay Borisov authored
In order to avoid duplicating init code for em there is an additional label, not_found_em, which is used to only set ->block_start. The only case when it will be used is if the extent we are adding overlaps with an existing extent. Make that case more obvious by: 1. Adding a comment hinting at what's going on 2. Assigning EXTENT_MAP_HOLE and directly going to insert. No functional changes. Reviewed-by:
-
Nikolay Borisov authored
Core btree functions in btrfs generally return 0 when an item is found, 1 in case the sought item cannot be found and <0 when an error happens. Consolidate the checks for those conditions in one 'if () {} else if () {}' construct rather than 2 separate 'if () {}' statements. This emphasizes that the handling code pertains to a single function. No functional changes. Reviewed-by: -
Nikolay Borisov authored
found_type really holds the type of extent and is guaranteed to to have a value between [0, 2]. The only time it can contain anything different is if btrfs_lookup_file_extent returned a positive value and the previous item is different than an extent. Avoid this situation by simply checking found_key.type rather than assigning the item type to found_type intermittently. Also make the variable an u8 to reduce stack usage. No functional changes. Reviewed-by:
-
Filipe Manana authored
Move the check that verifies if both inodes have checksums disabled or both have them enabled, from the clone and deduplication functions into the new common helper btrfs_remap_file_range_prep(). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Nikolay Borisov authored
We can never have extents marked as EXTENT_MAP_DELALLOC since this value is only ever used by btrfs_get_extent_fiemap. In this case the extent map is created by btrfs_get_extent_fiemap and is never really published, this flag is used to return the corresponding userspace one. Considering this, it's pointless having a check for EXTENT_MAP_DELALLOC in mergable_maps. Just remove it. Signed-off-by:
-
Filipe Manana authored
If the call to btrfs_balance() failed we would overwrite the error returned to user space with -EFAULT if the call to copy_to_user() failed as well. Fix that by calling copy_to_user() only if btrfs_balance() returned success or was canceled. Signed-off-by:
-
Filipe Manana authored
If the call to btrfs_dev_replace_by_ioctl() failed we would overwrite the error returned to user space with -EFAULT if the call to copy_to_user() failed as well. Fix that by calling copy_to_user() only if no error happened before or a device replace operation was canceled. Signed-off-by:
-
Filipe Manana authored
Checking if either of the inodes corresponds to a swapfile is already performed by generic_remap_file_range_prep(), so we do not need to do it in the btrfs clone and deduplication functions. Signed-off-by:
-
Nikolay Borisov authored
Add a couple of comments regarding the logic flow in shrink_delalloc. Then, cease using max_reclaim as a temporary variable when calculating nr_pages. Finally give max_reclaim a more becoming name, which uneqivocally shows at what this variable really holds. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
Add a comment explaining when ->inode could be NULL and why we always perform the ->async_delalloc_pages modification. Signed-off-by:
-
Nikolay Borisov authored
It can never trigger since before calling alloc_delalloc_work we have called igrab in start_delalloc_inodes. Reviewed-by:
-
Nikolay Borisov authored
ihold is supposed to be used when the caller already has a reference to the inode. In the case of cow_file_range_async this invariants holds, since the 3 call chains leading to this function all take a reference: btrfs_writepage <--- does igrab extent_write_full_page __extent_writepage writepage_delalloc btrfs_run_delalloc_range cow_file_range_async extent_write_cache_pages <--- does igrab __extent_writepage (same callchain as above) and submit_compressed_extents <-- already called from async CoW submit path, which would have done ihold. extent_write_locked_range __extent_writepage Signed-off-by: -
Nikolay Borisov authored
It's used only once so just inline the call to i_size_read. The semantics regarding the inode size are not changed, the pages in the range are locked and i_size cannot change between the time it was set and used. Reviewed-by:
-
Nikolay Borisov authored
We already pass the async_cow struct that holds a reference to the inode. Exploit this fact and remove the extra inode argument. No functional changes. Reviewed-by:
-
