- 13 May, 2016 26 commits
-
-
Aaro Koskinen authored
Fill MAC addresses from bootinfo when using appended DTB. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12590/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Don't fill MAC address if it's already set. This allows DTB to override the bootinfo. Signed-off-by:
-
Aaro Koskinen authored
Use separate pass to fill MAC addresses. This is needed because we want to do this also for the appended DTB. Signed-off-by:
-
Aaro Koskinen authored
Use model string from DTB for board type if the board is unknown. This is more informative, e.g. with EdgeRouter Pro the /proc/cpuinfo will display "ubnt,e200 (CN6120p1.1-1000-NSP)" instead of misleading "Unsupported Board". Signed-off-by:
-
Aaro Koskinen authored
Initialize system type string after device tree init. Signed-off-by:
-
Aaro Koskinen authored
Return NULL for unsupported board. Signed-off-by:
-
David Daney authored
Use the trigger type passed in to the function instead of reading it back out of the irq_data. Signed-off-by:
-
David Daney authored
OCTEON chips with the CIU3 interrupt controller use a different IPI mechanism that previous models. Add plat_smp_ops for the cn78xx and probing code to choose between the two types of ops. Signed-off-by:
-
David Daney authored
Add irq_chip support for both IPI and "normal" interrupts of the CIU3 controller. Document the device tree binding for the CIU3. Some functions are non-static as they will be used by follow-on support for MSI-X. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12500/Signed-off-by:
-
David Daney authored
Attempts to read the nonexistent registers results in bus errors. Either use registers that exist, or don't do the access as appropriate. Signed-off-by:
-
David Daney authored
Follow on patchs need to be able to distinguish the new models. Signed-off-by:
-
David Daney authored
These new members of the OCTEON III family have some new registers, update some of the definitions for use in follow on patches. Signed-off-by:
-
David Daney authored
Per the subject, always select HANDLE_DOMAIN_IRQ, and implement set_irq_regs() so that it actually works. Signed-off-by:
-
David Daney authored
Follow-on patches for OCTEON III will increase the number of irqs to potentially more than 256. Increase the width of the octeon_irq_ciu_to_irq to int to be able to handle this case. Remove the hacky code that verified that u8 would not be overflowed. Signed-off-by:
-
David Daney authored
To support more than 48 CPUs, the bootinfo structure grows a new coremask structure. Add the definition of the structure and add it to struct cvmx_bootinfo. In prom_init(), copy the new coremask data into the sysinfo structure, and use it in smp_setup(). Signed-off-by:
-
David Daney authored
Get rid of the long unused code. Signed-off-by:
-
David Daney authored
Add new processor identifiers for Cavium CN73xx and CNF75xx processors, and probe for them in cpu-probe.c Signed-off-by:
-
Ralf Baechle authored
It was calling flush_cache_all() which is a no-op since a long time anyway and which was overkill in the old days when it was actually doing something because only the D-cache needs to be flushed, never the I-cache, never the S-cache. Since however highmem on MIPS is still only supported on processors that don't suffer from cache aliases, we could turn flush_cache_kmaps() into a no-op - but for paranoia's sake we rather make it BUG_ON(cpu_has_dc_aliases()). Signed-off-by: -
Ralf Baechle authored
flush_cache_all() is a nop and loongson 3 is fully coherent. Signed-off-by: -
Ralf Baechle authored
It's probably a good idea to flush caches before reset and by the time this code was written flush_cache_all did actually still do something. Signed-off-by: -
Ralf Baechle authored
Flushing caches is probably sensible on reset but flush_cache_all has been a no-op for a very long time. Signed-off-by: -
Ralf Baechle authored
flush_cache_all will go away. Signed-off-by: -
Alban Bedel authored
Don't set _machine_restart() on OF machines as the reset driver now provides a system restart handler. Signed-off-by:
Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12235/Signed-off-by:
-
Alban Bedel authored
Reuse the early printk code to support the serial in zboot. We copy early_printk.c instead of referencing it because we need to build a different object file for the normal kernel and zboot. Signed-off-by:
-
Alban Bedel authored
Now that appended DTB is usable we can drop the builtin DTB support. Signed-off-by:
-
Alban Bedel authored
This is needed for bootloader supporting UHI and to support appended DTB. Signed-off-by:
-
- 09 May, 2016 14 commits
-
-
James Hogan authored
A couple of netlogic assembly files define CP0_EBASE to $15, the same as CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and CP0_EBase registers. However commit 609cf6f2 ("MIPS: CPS: Early debug using an ns16550-compatible UART") added a different definition of CP0_EBASE to mipsregs.h, which included a register select of 1. This causes harmless build warnings like the following: arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined #define CP0_EBASE $15 ^ In file included from arch/mips/netlogic/common/reset.S:41:0: ./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition #define CP0_EBASE $15, 1 ^ Update the code to use the definitions from mipsregs.h for accessing both registers. Fixes: 609cf6f2 ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13183/Signed-off-by:
-
Joshua Kinard authored
Update the recent changes to set_pte() that were added in 46011e6e to handle R10000_LLSC_WAR, and format the assembly to match other areas of the MIPS tree using the same WAR. This also incorporates a patch recently sent in my Markos Chandras, "Remove local LL/SC preprocessor variants", so that patch doesn't need to be applied if this one is accepted. Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Fixes: 46011e6e ("MIPS: Make set_pte() SMP safe.) Cc: David Daney <david.daney@cavium.com> Cc: Linux/MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/11103/Signed-off-by:
-
Ralf Baechle authored
Inspired by Markos Chandras' patch. I just didn't want do pull bitsops.h into pgtable.h. Signed-off-by:
-
James Hogan authored
Building an MSA capable kernel with a toolchain that supports MSA produces warnings such as this: arch/mips/kernel/r4k_fpu.S:229: Warning: the `msa' extension requires 64-bit FPRs This is due to ".set msa" without ".set fp=64" in the non doubleword MSA load/store macros, since MSA requires the 64-bit FPU registers (FR=1). Add the missing fp=64 in these macros to silence the warnings. Signed-off-by:
-
James Hogan authored
When lockdep is enabled on a 64-bit kernel the FPR offset into the thread structure exceeds the maximum range of the MSA ld.d/st.d instructions. For example THREAD_FPR31 = 4644 (instead of 2448), while the signed immediate field is only 10 bits with an implicit multiply by 8, giving a maximum offset of 511*8 = 4088. This isn't a problem when the toolchain doesn't support MSA as the ld_*/st_* macros perform the addition separately into $1 with [d]addui which has a 16bit signed immediate field. Fix the case where the toolchain does support MSA by doing a single addition of THREAD_FPR0 into $1 with [d]addui, and doing the ld_*/st_* relative to that. Signed-off-by:
-
James Hogan authored
The MSA ld_*/st_* assembler macros for when the toolchain doesn't support MSA use addu to offset the base address. However it is a virtual memory pointer so fix it to use PTR_ADDU which expands to daddu for 64-bit kernels. Signed-off-by:
-
Paul Burton authored
In revision 1.12 of the MSA specification, the copy_u.w instruction has been removed for MIPS32 & the copy_u.d instruction has been removed for MIPS64. Newer toolchains (eg. Codescape SDK essentials 2015.10) will complain about this like so: arch/mips/kernel/r4k_fpu.S:290: Error: opcode not supported on this processor: mips32r2 (mips32r2) `copy_u.w $1,$w26[3]' Since we always copy to the width of a GPR, simply use copy_s instead of copy_u to fix this. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Maciej W. Rozycki authored
This complements commit 8c56208a ("MIPS: lib: memset: Add MIPS R6 support"). Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12452/Signed-off-by:
-
Leonid Yegoshin authored
Error recovery pointers for fixups was improperly set as ".word" which is unsuitable for MIPS64. Replaced by STR(PTR) [ralf@linux-mips.org: Apply changes as requested in the review process.] Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: b0a668fb ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Cc: macro@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/9911/Signed-off-by:
-
Matt Redfearn authored
This patch ensures that the dev parameter is checked for NULL before it is dereferenced in massage_gfp_flags. If dev is NULL, then fall back setting the GFP flag requested and available. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11919/Signed-off-by:
-
Yanjiang Jin authored
Use boot_cpu_type() instead of current_cpu_type() in oprofile_arch_init() to avoid the below warning, cpu_type is normally consistent in a MIPS SMP system. There are a few exceptions such as SGI servers where it is possible to mix R10000, R12000, R14000 and R16000 within certain constraints. Let's not worry about those now. BUG: using smp_processor_id() in preemptible [00000000] code: insmod/952 caller is oprofile_arch_init+0x30/0x194 [oprofile] CPU: 5 PID: 952 Comm: insmod Not tainted 4.1.13-WR8.0.0.0_standard #1 Stack : ffffffff80c10000 0000000000000001 8000000025bf0790 ffffffff80e10000 ffffffff80e50000 ffffffff80254e2c ffffffff80b64428 ffffffff80e10790 0000000000000000 ffffffff801caeb8 0000000000000045 0000000000000005 ffffffff80c10000 ffffffff801cb798 0000000000000000 ffffffff80e30000 0000000000000000 ffffffff801ff1c0 ffffffff80e2d2f8 000000000000000b ffffffff801cbba0 ffffffff80e107b0 ffffffff80a77828 0000000000000005 00000000000003b8 ffffffff80e2d2f8 800000040ad39960 ffffffff801f9950 0000000000000124 80000004093b7990 80000004093b7ab8 ffffffff80925108 ffffffff80b69a07 ffffffff80a6f0d0 8000000407240e00 ffffffff801cc934 000000000000005d ffffffff80159080 0000000000000005 00000000000003b8 ... Call Trace: [<ffffffff80159080>] show_stack+0xe8/0x108 [<ffffffff80925108>] dump_stack+0x8c/0xd8 [<ffffffff80606570>] check_preemption_disabled+0x110/0x118 [<ffffffffc0086104>] oprofile_arch_init+0x30/0x194 [oprofile] [<ffffffffc008602c>] oprofile_init+0x2c/0xc0 [oprofile] [<ffffffff80100550>] do_one_initcall+0xa0/0x1c0 [<ffffffff80921e04>] do_init_module+0x80/0x1d8 [<ffffffff801fd0d4>] load_module+0x1b74/0x2278 [<ffffffff801fdab4>] SyS_finit_module+0xcc/0xf0 [<ffffffff80165884>] handle_sysn32+0x44/0x70 [ralf@linux-mips.org: Correct commit message.] Signed-off-by:
Yanjiang Jin <yanjiang.jin@windriver.com> Cc: rric@kernel.org Cc: jinyanjiang@gmail.com Cc: linux-mips@linux-mips.org Cc: oprofile-list@lists.sf.net Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11769/Signed-off-by:
-
Huacai Chen authored
Commit d5ece1cb ("Fix ld-version.sh to handle large 3rd version part") modifies the ld version description. This causes a build error on Loongson-3, so fix it. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12890/Signed-off-by:
-
Huacai Chen authored
Due to datasheet, reserving 0xff800000~0xffffffff (8MB below 4GB) is not enough for RS780E integrated GPU's TOM (top of memory) registers and MSI/MSI-x memory region, so we reserve 0xfe000000~0xffffffff (32MB below 4GB). Signed-off-by:
-
Huacai Chen authored
After commit 92923ca3 ("mm: meminit: only set page reserved in the memblock region"), the MIPS hibernation is broken. Because pages in nosave data section should be "reserved", but currently they aren't set to "reserved" at initialization. This patch makes hibernation work again. Signed-off-by:
-
