- 19 Jul, 2012 21 commits
-
-
Thomas Gleixner authored
This is a backport of f6c06abf To finally fix the infamous leap second issue and other race windows caused by functions which change the offsets between the various time bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a function which atomically gets the current monotonic time and updates the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic overhead. The previous patch which provides ktime_t offsets allows us to make this function almost as cheap as ktime_get() which is going to be replaced in hrtimer_interrupt(). Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
This is a backport of 196951e9 We need to update the base offsets from this code and we need to do that under base->lock. Move the lock held region around the ktime_get() calls. The ktime_get() calls are going to be replaced with a function which gets the time and the offsets atomically. Signed-off-by:
-
Thomas Gleixner authored
This is a backport of 5b9fe759 We need to update the hrtimer clock offsets from the hrtimer interrupt context. To avoid conversions from timespec to ktime_t maintain a ktime_t based representation of those offsets in the timekeeper. This puts the conversion overhead into the code which updates the underlying offsets and provides fast accessible values in the hrtimer interrupt. Signed-off-by:
-
John Stultz authored
This is a backport of 4873fa07 The timekeeping code misses an update of the hrtimer subsystem after a leap second happened. Due to that timers based on CLOCK_REALTIME are either expiring a second early or late depending on whether a leap second has been inserted or deleted until an operation is initiated which causes that update. Unless the update happens by some other means this discrepancy between the timekeeping and the hrtimer data stays forever and timers are expired either early or late. The reported immediate workaround - $ data -s "`date`" - is causing a call to clock_was_set() which updates the hrtimer data structures. See: http://www.sheeri.com/content/mysql-and-leap-second-high-cpu-and-fix Add the missing clock_was_set() call to update_wall_time() in case of a leap second event. The actual update is deferred to softirq context as the necessary smp function call cannot be invoked from hard interrupt context. Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Reviewed-by:
-
John Stultz authored
This is a backport of f55a6faa clock_was_set() cannot be called from hard interrupt context because it calls on_each_cpu(). For fixing the widely reported leap seconds issue it is necessary to call it from hard interrupt context, i.e. the timer tick code, which does the timekeeping updates. Provide a new function which denotes it in the hrtimer cpu base structure of the cpu on which it is called and raise the hrtimer softirq. We then execute the clock_was_set() notificiation from softirq context in run_hrtimer_softirq(). The hrtimer softirq is rarely used, so polling the flag there is not a performance issue. [ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get rid of all this ifdeffery ASAP ] Signed-off-by:
-
Thomas Gleixner authored
This is a backport of cc06268c While not a bugfix itself, it allows following fixes to backport in a more straightforward manner. CC: Thomas Gleixner <tglx@linutronix.de> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
John Stultz authored
This is a backport of fad0c66c which resolves a bug the previous commit. Commit 6b43ae8a (ntp: Fix leap-second hrtimer livelock) broke the leapsecond update of CLOCK_MONOTONIC. The missing leapsecond update to wall_to_monotonic causes discontinuities in CLOCK_MONOTONIC. Adjust wall_to_monotonic when NTP inserted a leapsecond. Reported-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
This is a backport of dd48d708 When repeating a UTC time value during a leap second (when the UTC time should be 23:59:60), the TAI timescale should not stop. The kernel NTP code increments the TAI offset one second too late. This patch fixes the issue by incrementing the offset during the leap second itself. Signed-off-by:
-
John Stultz authored
This is a backport of 6b43ae8a This should have been backported when it was commited, but I mistook the problem as requiring the ntp_lock changes that landed in 3.4 in order for it to occur. Unfortunately the same issue can happen (with only one cpu) as follows: do_adjtimex() write_seqlock_irq(&xtime_lock); process_adjtimex_modes() process_adj_status() ntp_start_leap_timer() hrtimer_start() hrtimer_reprogram() tick_program_event() clockevents_program_event() ktime_get() seq = req_seqbegin(xtime_lock); [DEADLOCK] This deadlock will no always occur, as it requires the leap_timer to force a hrtimer_reprogram which only happens if its set and there's no sooner timer to expire. NOTE: This patch, being faithful to the original commit, introduces a bug (we don't update wall_to_monotonic), which will be resovled by backporting a following fix. Original commit message below: Since commit 7dffa3c6 the ntp subsystem has used an hrtimer for triggering the leapsecond adjustment. However, this can cause a potential livelock. Thomas diagnosed this as the following pattern: CPU 0 CPU 1 do_adjtimex() spin_lock_irq(&ntp_lock); process_adjtimex_modes(); timer_interrupt() process_adj_status(); do_timer() ntp_start_leap_timer(); write_lock(&xtime_lock); hrtimer_start(); update_wall_time(); hrtimer_reprogram(); ntp_tick_length() tick_program_event() spin_lock(&ntp_lock); clockevents_program_event() ktime_get() seq = req_seqbegin(xtime_lock); This patch tries to avoid the problem by reverting back to not using an hrtimer to inject leapseconds, and instead we handle the leapsecond processing in the second_overflow() function. The downside to this change is that on systems that support highres timers, the leap second processing will occur on a HZ tick boundary, (ie: ~1-10ms, depending on HZ) after the leap second instead of possibly sooner (~34us in my tests w/ x86_64 lapic). This patch applies on top of tip/timers/core. CC: Sasha Levin <levinsasha928@gmail.com> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by:
Sasha Levin <levinsasha928@gmail.com> Diagnoised-by:
-
Michal Kazior authored
commit f8cdddb8 upstream. Don't validate interface combinations on a stopped interface. Otherwise we might end up being able to create a new interface with a certain type, but won't be able to change an existing interface into that type. This also skips some other functions when interface is stopped and changing interface type. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [Fixes regression introduced by cherry pick of 463454b5] Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Eric Dumazet authored
commit fdf5af0d upstream. Denys Fedoryshchenko reported that SYN+FIN attacks were bringing his linux machines to their limits. Dont call conn_request() if the TCP flags includes SYN flag Reported-by:
Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Yuri Khan authored
commit e76b8ee2 upstream. I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by:
Yuri Khan <yurivkhan@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tushar Dave authored
commit d0efa8f2 upstream. SYNCH bit and IV bit of RXCW register are sticky. Before examining these bits, RXCW should be read twice to filter out one-time false events and have correct values for these bits. Incorrect values of these bits in link check logic can cause weird link stability issues if auto-negotiation fails. Reported-by:
Dean Nelson <dnelson@redhat.com> Signed-off-by:
Tushar Dave <tushar.n.dave@intel.com> Reviewed-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit efd82118 upstream. On rt2x00_dmastart() we increase index specified by Q_INDEX and on rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries between Q_INDEX_DONE and Q_INDEX are those we currently process in the hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can submit to the hardware. According to that fix rt2x00usb_kick_queue(), as we need to submit RX entries that are not processed by the hardware. It worked before only for empty queue, otherwise was broken. Note that for TX queues indexes ordering are ok. We need to kick entries that have filled skb, but was not submitted to the hardware, i.e. started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set. From practical standpoint this fixes RX queue stall, usually reproducible in AP mode, like for example reported here: https://bugzilla.redhat.com/show_bug.cgi?id=828824Reported-and-tested-by:
Franco Miceli <fmiceli@plan.ceibal.edu.uy> Reported-and-tested-by:
Tom Horsley <horsley1953@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Anders Kaseorg authored
commit 05d290d6 upstream. If a parent and child process open the two ends of a fifo, and the child immediately exits, the parent may receive a SIGCHLD before its open() returns. In that case, we need to make sure that open() will return successfully after the SIGCHLD handler returns, instead of throwing EINTR or being restarted. Otherwise, the restarted open() would incorrectly wait for a second partner on the other end. The following test demonstrates the EINTR that was wrongly thrown from the parent’s open(). Change .sa_flags = 0 to .sa_flags = SA_RESTART to see a deadlock instead, in which the restarted open() waits for a second reader that will never come. (On my systems, this happens pretty reliably within about 5 to 500 iterations. Others report that it manages to loop ~forever sometimes; YMMV.) #include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define CHECK(x) do if ((x) == -1) {perror(#x); abort();} while(0) void handler(int signum) {} int main() { struct sigaction act = {.sa_handler = handler, .sa_flags = 0}; CHECK(sigaction(SIGCHLD, &act, NULL)); CHECK(mknod("fifo", S_IFIFO | S_IRWXU, 0)); for (;;) { int fd; pid_t pid; putc('.', stderr); CHECK(pid = fork()); if (pid == 0) { CHECK(fd = open("fifo", O_RDONLY)); _exit(0); } CHECK(fd = open("fifo", O_WRONLY)); CHECK(close(fd)); CHECK(waitpid(pid, NULL, 0)); } } This is what I suspect was causing the Git test suite to fail in t9010-svn-fe.sh: http://bugs.debian.org/678852Signed-off-by:
Anders Kaseorg <andersk@mit.edu> Reviewed-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 88ca518b upstream. intel_ips driver spews the warning message "ME failed to update for more than 1s, likely hung" at each second endlessly on HP ProBook laptops with IronLake. As this has never worked, better to blacklist the driver for now. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Todd Poynor authored
commit 8265981b upstream. Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by:
Todd Poynor <toddpoynor@google.com> Acked-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
commit 596fd462 upstream. We don't need to open code the divide function, just use div_u64 that already exists and do the same job. While this is a straightforward clean up, there is more to that, the real motivation for this. While building on a cross compiling environment in armel, using gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5), I was getting the following build error: ERROR: "__aeabi_uldivmod" [drivers/mtd/nand/nandsim.ko] undefined! After investigating with objdump and hand built assembly version generated with the compiler, I narrowed __aeabi_uldivmod as being generated from the divide function. When nandsim.c is built with -fno-inline-functions-called-once, that happens when CONFIG_DEBUG_SECTION_MISMATCH is enabled, the do_div optimization in arch/arm/include/asm/div64.h doesn't work as expected with the open coded divide function: even if the do_div we are using doesn't have a constant divisor, the compiler still includes the else parts of the optimized do_div macro, and translates the divisions there to use __aeabi_uldivmod, instead of only calling __do_div_asm -> __do_div64 and optimizing/removing everything else out. So to reproduce, gcc 4.6 plus CONFIG_DEBUG_SECTION_MISMATCH=y and CONFIG_MTD_NAND_NANDSIM=m should do it, building on armel. After this change, the compiler does the intended thing even with -fno-inline-functions-called-once, and optimizes out as expected the constant handling in the optimized do_div on arm. As this also avoids a build issue, I'm marking for Stable, as I think is applicable for this case. Signed-off-by:
Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Santosh Nayak authored
commit 82163edc upstream. There is a missing "up_write()" here. Semaphore should be released before returning error value. Signed-off-by:
Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Jeff Moyer authored
commit 91f68c89 upstream. Commit 080399aa ("block: don't mark buffers beyond end of disk as mapped") exposed a bug in __getblk_slow that causes mount to hang as it loops infinitely waiting for a buffer that lies beyond the end of the disk to become uptodate. The problem was initially reported by Torsten Hilbrich here: https://lkml.org/lkml/2012/6/18/54 and also reported independently here: http://www.sysresccd.org/forums/viewtopic.php?f=13&t=4511 and then Richard W.M. Jones and Marcos Mello noted a few separate bugzillas also associated with the same issue. This patch has been confirmed to fix: https://bugzilla.redhat.com/show_bug.cgi?id=835019 The main problem is here, in __getblk_slow: for (;;) { struct buffer_head * bh; int ret; bh = __find_get_block(bdev, block, size); if (bh) return bh; ret = grow_buffers(bdev, block, size); if (ret < 0) return NULL; if (ret == 0) free_more_memory(); } __find_get_block does not find the block, since it will not be marked as mapped, and so grow_buffers is called to fill in the buffers for the associated page. I believe the for (;;) loop is there primarily to retry in the case of memory pressure keeping grow_buffers from succeeding. However, we also continue to loop for other cases, like the block lying beond the end of the disk. So, the fix I came up with is to only loop when grow_buffers fails due to memory allocation issues (return value of 0). The attached patch was tested by myself, Torsten, and Rich, and was found to resolve the problem in call cases. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Reported-and-Tested-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by:
Richard W.M. Jones <rjones@redhat.com> Reviewed-by:
Josh Boyer <jwboyer@redhat.com> [ Jens is on vacation, taking this directly - Linus ] Signed-off-by:
-
Jean Delvare authored
commit 41002f8d upstream. We were accidentally losing one bit in the configuration register on device initialization. It was reported to freeze one specific system right away. Properly preserve all bits we don't explicitly want to change in order to prevent that. Reported-by:
Stevie Trujillo <stevie.trujillo@gmail.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 16 Jul, 2012 19 commits
-
-
Greg Kroah-Hartman authored
-
Feng Tang authored
commit 7f68b4c2 upstream. Current WARN msg is only for the ati_ixp4x0 board, while this function is used by mulitple platforms. So this one board specific warning is not appropriate any more. Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Feng Tang authored
commit ae10ccdc upstream. Currently when acpi_skip_timer_override is set, it only cover the (source_irq == 0 && global_irq == 2) cases. While there is also platform which need use this option and its global_irq is not 2. This patch will extend acpi_skip_timer_override to cover all timer overriding cases as long as the source irq is 0. This is the first part of a fix to kernel bug bugzilla 40002: "IRQ 0 assigned to VGA" https://bugzilla.kernel.org/show_bug.cgi?id=40002Reported-and-tested-by:
Szymon Kowalczyk <fazerxlo@o2.pl> Signed-off-by:
-
Andy Lutomirski authored
commit 9ab4233d upstream. Otherwise the code races with munmap (causing a use-after-free of the vma) or with close (causing a use-after-free of the struct file). The bug was introduced by commit 90ed52eb ("[PATCH] holepunch: fix mmap_sem i_mutex deadlock") [bwh: Backported to 3.2: - Adjust context - madvise_remove() calls vmtruncate_range(), not do_fallocate()] [luto: Backported to 3.0: Adjust context] Cc: Hugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Bob Liu authored
commit fea9f718 upstream. There is a bug in the below scenario for !CONFIG_MMU: 1. create a new file 2. mmap the file and write to it 3. read the file can't get the correct value Because sys_read() -> generic_file_aio_read() -> simple_readpage() -> clear_page() which causes the page to be zeroed. Add SetPageUptodate() to ramfs_nommu_expand_for_mapping() so that generic_file_aio_read() do not call simple_readpage(). Signed-off-by:
Bob Liu <lliubbo@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Rientjes authored
commit 4bf2bba3 upstream. If page migration cannot charge the temporary page to the memcg, migrate_pages() will return -ENOMEM. This isn't considered in memory compaction however, and the loop continues to iterate over all pageblocks trying to isolate and migrate pages. If a small number of very large memcgs happen to be oom, however, these attempts will mostly be futile leading to an enormous amout of cpu consumption due to the page migration failures. This patch will short circuit and fail memory compaction if migrate_pages() returns -ENOMEM. COMPACT_PARTIAL is returned in case some migrations were successful so that the page allocator will retry. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Benoît Thébaudeau authored
commit b59f6d1f upstream. Fixes WARNING: at irq/handle.c:146 handle_irq_event_percpu+0x19c/0x1b8() irq 25 handler mxc_rtc_interrupt+0x0/0xac enabled interrupts Modules linked in: (unwind_backtrace+0x0/0xf0) from (warn_slowpath_common+0x4c/0x64) (warn_slowpath_common+0x4c/0x64) from (warn_slowpath_fmt+0x30/0x40) (warn_slowpath_fmt+0x30/0x40) from (handle_irq_event_percpu+0x19c/0x1b8) (handle_irq_event_percpu+0x19c/0x1b8) from (handle_irq_event+0x28/0x38) (handle_irq_event+0x28/0x38) from (handle_level_irq+0x80/0xc4) (handle_level_irq+0x80/0xc4) from (generic_handle_irq+0x24/0x38) (generic_handle_irq+0x24/0x38) from (handle_IRQ+0x30/0x84) (handle_IRQ+0x30/0x84) from (avic_handle_irq+0x2c/0x4c) (avic_handle_irq+0x2c/0x4c) from (__irq_svc+0x40/0x60) Exception stack(0xc050bf60 to 0xc050bfa8) bf60: 00000001 00000000 003c4208 c0018e20 c050a000 c050a000 c054a4c8 c050a000 bf80: c05157a8 4117b363 80503bb4 00000000 01000000 c050bfa8 c0018e2c c000e808 bfa0: 60000013 ffffffff (__irq_svc+0x40/0x60) from (default_idle+0x1c/0x30) (default_idle+0x1c/0x30) from (cpu_idle+0x68/0xa8) (cpu_idle+0x68/0xa8) from (start_kernel+0x22c/0x26c) Signed-off-by:
Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Jiang Liu authored
commit d8adde17 upstream. kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81051a94>] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP <ffff8806044f1d78> CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by:
Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
NeilBrown authored
commit fc448a18 upstream. If a RAID10 has an odd number of chunks - as might happen when there are an odd number of devices - the last chunk has no pair and so is not mirrored. We don't store data there, but when recovering the last device in an array we retry to recover that last chunk from a non-existent location. This results in an error, and the recovery aborts. When we get to that last chunk we should just stop - there is nothing more to do anyway. This bug has been present since the introduction of RAID10, so the patch is appropriate for any -stable kernel. Reported-by:
Christian Balzer <chibi@gol.com> Tested-by:
NeilBrown <neilb@suse.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
majianpeng authored
commit 6c0544e2 upstream. In chunk_aligned_read() we are adding data_offset before calling is_badblock. But is_badblock also adds data_offset, so that is bad. So move the addition of data_offset to after the call to is_badblock. This bug was introduced by commit 31c176ec md/raid5: avoid reading from known bad blocks. which first appeared in 3.0. So that patch is suitable for any -stable kernel from 3.0.y onwards. However it will need minor revision for most of those (as the comment didn't appear until recently). Signed-off-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
-
H. Peter Anvin authored
commit 4ad33411 upstream. It makes sense to label "Digital Thermal Sensor" as "DTS", but unfortunately the string "dts" was already used for "Debug Store", and /proc/cpuinfo is a user space ABI. Therefore, rename this to "dtherm". This conflict went into mainline via the hwmon tree without any x86 maintainer ack, and without any kind of hint in the subject. a4659053 x86/hwmon: fix initialization of coretemp Reported-by:
H. Peter Anvin <hpa@linux.intel.com> [bwh: Backported to 3.2: drop the coretemp device table change] Signed-off-by:
-
Tao Guo authored
commit 32587371 upstream. Fix a regression introduced by 7eaceacc ("block: remove per-queue plugging"). In that patch, Jens removed the whole mm_unplug_device() function, which used to be the trigger to make umem start to work. We need to implement unplugging to make umem start to work, or I/O will never be triggered. Signed-off-by:
Tao Guo <Tao.Guo@emc.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Shaohua Li <shli@kernel.org> Cc: <stable@vger.kernel.org> Acked-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Stanislaw Gruszka authored
commit 0fde0a8c upstream. Fix: BUG: sleeping function called from invalid context at kernel/workqueue.c:2547 in_atomic(): 1, irqs_disabled(): 0, pid: 629, name: wpa_supplicant 2 locks held by wpa_supplicant/629: #0: (rtnl_mutex){+.+.+.}, at: [<c08b2b84>] rtnl_lock+0x14/0x20 #1: (&trigger->leddev_list_lock){.+.?..}, at: [<c0867f41>] led_trigger_event+0x21/0x80 Pid: 629, comm: wpa_supplicant Not tainted 3.3.0-0.rc3.git5.1.fc17.i686 Call Trace: [<c046a9f6>] __might_sleep+0x126/0x1d0 [<c0457d6c>] wait_on_work+0x2c/0x1d0 [<c045a09a>] __cancel_work_timer+0x6a/0x120 [<c045a160>] cancel_delayed_work_sync+0x10/0x20 [<f7dd3c22>] rtl8187_led_brightness_set+0x82/0xf0 [rtl8187] [<c0867f7c>] led_trigger_event+0x5c/0x80 [<f7ff5e6d>] ieee80211_led_radio+0x1d/0x40 [mac80211] [<f7ff3583>] ieee80211_stop_device+0x13/0x230 [mac80211] Removing _sync is ok, because if led_on work is currently running it will be finished before led_off work start to perform, since they are always queued on the same mac80211 local->workqueue. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=795176Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
-
Shaohua Li authored
commit fab363b5 upstream. There isn't locking setting STRIPE_DELAYED and STRIPE_PREREAD_ACTIVE bits, but the two bits have relationship. A delayed stripe can be moved to hold list only when preread active stripe count is below IO_THRESHOLD. If a stripe has both the bits set, such stripe will be in delayed list and preread count not 0, which will make such stripe never leave delayed list. Signed-off-by:
Shaohua Li <shli@fusionio.com> Signed-off-by:
-
Nadav Har'El authored
commit d550dda1 upstream. This is a tiny, but important, patch to vhost. Vhost's worker thread only called schedule() when it had no work to do, and it wanted to go to sleep. But if there's always work to do, e.g., the guest is running a network-intensive program like netperf with small message sizes, schedule() was *never* called. This had several negative implications (on non-preemptive kernels): 1. Passing time was not properly accounted to the "vhost" process (ps and top would wrongly show it using zero CPU time). 2. Sometimes error messages about RCU timeouts would be printed, if the core running the vhost thread didn't schedule() for a very long time. 3. Worst of all, a vhost thread would "hog" the core. If several vhost threads need to share the same core, typically one would get most of the CPU time (and its associated guest most of the performance), while the others hardly get any work done. The trivial solution is to add if (need_resched()) schedule(); After doing every piece of work. This will not do the heavy schedule() all the time, just when the timer interrupt decided a reschedule is warranted (so need_resched returns true). Thanks to Abel Gordon for this patch. Signed-off-by:
Nadav Har'El <nyh@il.ibm.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Vaibhav Nagarnaik authored
commit 71babb27 upstream. According to Documentation/trace/ftrace.txt: tracing_cpumask: This is a mask that lets the user only trace on specified CPUS. The format is a hex string representing the CPUS. The tracing_cpumask currently doesn't affect the tracing state of per-CPU ring buffers. This patch enables/disables CPU recording as its corresponding bit in tracing_cpumask is set/unset. Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by:
Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Davide Gerhard authored
commit 6de0298e upstream. This adds support for the iPad to the ipheth driver. (product id = 0x129a) Signed-off-by:
Davide Gerhard <rainbow@irh.it> Signed-off-by:
-
Sarah Sharp authored
Commit 51c9e6c7 upstream, but modified to get this to apply on 3.0. If the user chooses to say "no" to CONFIG_USB_XHCI_HCD on a system with an Intel Panther Point chipset, the PCI quirks code or the EHCI driver will switch the ports over to the xHCI host, but the xHCI driver will never load. The ports will be powered off and seem "dead" to the user. Fix this by only switching the ports over if CONFIG_USB_XHCI_HCD is either compiled in, or compiled as a module. This patch should be backported to the 3.0 stable kernel, since it contains the commit 69e848c2 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by:
Eric Anholt <eric.anholt@intel.com> Reported-by:
David Bein <d.bein@f5.com> Signed-off-by:
-
Alan Stern authored
commit dbf0e4c7 upstream. Quite a few ASUS computers experience a nasty problem, related to the EHCI controllers, when going into system suspend. It was observed that the problem didn't occur if the controllers were not put into the D3 power state before starting the suspend, and commit 151b6128 (USB: EHCI: fix crash during suspend on ASUS computers) was created to do this. It turned out this approach messed up other computers that didn't have the problem -- it prevented USB wakeup from working. Consequently commit c2fb8a3f (USB: add NO_D3_DURING_SLEEP flag and revert 151b6128) was merged; it reverted the earlier commit and added a whitelist of known good board names. Now we know the actual cause of the problem. Thanks to AceLan Kao for tracking it down. According to him, an engineer at ASUS explained that some of their BIOSes contain a bug that was added in an attempt to work around a problem in early versions of Windows. When the computer goes into S3 suspend, the BIOS tries to verify that the EHCI controllers were first quiesced by the OS. Nothing's wrong with this, but the BIOS does it by checking that the PCI COMMAND registers contain 0 without checking the controllers' power state. If the register isn't 0, the BIOS assumes the controller needs to be quiesced and tries to do so. This involves making various MMIO accesses to the controller, which don't work very well if the controller is already in D3. The end result is a system hang or memory corruption. Since the value in the PCI COMMAND register doesn't matter once the controller has been suspended, and since the value will be restored anyway when the controller is resumed, we can work around the BIOS bug simply by setting the register to 0 during system suspend. This patch (as1590) does so and also reverts the second commit mentioned above, which is now unnecessary. In theory we could do this for every PCI device. However to avoid introducing new problems, the patch restricts itself to EHCI host controllers. Finally the affected systems can suspend with USB wakeup working properly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728Based-on-patch-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Dâniel Fraga <fragabr@gmail.com> Tested-by:
Javier Marcet <jmarcet@gmail.com> Tested-by:
Andrey Rahmatullin <wrar@wrar.name> Tested-by:
Oleksij Rempel <bug-track@fisher-privat.net> Tested-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
