Some implementations of the SBI time extension depend on hart-local
state (for example, CSRs) that are lost or hardware that is powered
down when a CPU is suspended. To be safe, the clockevents driver
cannot assume that timer IRQs will be received during CPU suspend.

Fixes: 62b01943 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220509012121.40031-1-samuel@sholland.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The boardfiles for IXP4xx have been deleted. Delete all the
quirks and code dealing with that boot path and rely solely on
device tree boot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220406205505.2332821-1-linus.walleij@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

This commit adds dt-binding documentation of timer for Mediatek MT8186 SoC
Platform.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220311130732.22706-2-allen-kh.cheng@mediatek.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

With debugobjects enabled the timer hint for freeing of active timers
embedded inside delayed works is always the same, i.e. the hint is
delayed_work_timer_fn, even though the function the delayed work is going
to run can be wildly different depending on what work was queued.  Enabling
workqueue debugobjects doesn't help either because the delayed work isn't
considered active until it is actually queued to run on a workqueue. If the
work is freed while the timer is pending the work isn't considered active
so there is no information from workqueue debugobjects.

Special case delayed works in the timer debugobjects hint logic so that the
delayed work function is returned instead of the delayed_work_timer_fn.
This will help to understand which delayed work was pending that got
freed.

Apply the same treatment for kthread_delayed_work because it follows the
same pattern.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220511201951.42408-1-swboyd@chromium.org

Use flat rather than nested indentation for chained else/if clauses as 
per coding-style.rst:

	if (x == y) {
		..
	} else if (x > y) {
		...
	} else {
		....
	}

This also improves readability.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204240148220.9383@angie.orcam.me.uk

The kernel uses kHz as the unit for clock rates reported between 1MHz
(inclusive) and 4MHz (exclusive), e.g.:

 sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns

This reduces the amount of data lost due to rounding, but hasn't been
replicated for the kHz range when support was added for proper reporting of
sub-kHz clock rates.  Take the same approach for rates between 1kHz
(inclusive) and 4kHz (exclusive), which makes it consistent.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204240106380.9383@angie.orcam.me.uk

The frequency reported for clock sources are rounded down, which gives
misleading figures, e.g.:

 I/O ASIC clock frequency 24999480Hz
 sched_clock: 32 bits at 24MHz, resolution 40ns, wraps every 85901132779ns
 MIPS counter frequency 59998512Hz
 sched_clock: 32 bits at 59MHz, resolution 16ns, wraps every 35792281591ns

Rounding to nearest is more adequate:

 I/O ASIC clock frequency 24999664Hz
 sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85900499947ns
 MIPS counter frequency 59999728Hz
 sched_clock: 32 bits at 60MHz, resolution 16ns, wraps every 35791556599ns
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204240055590.9383@angie.orcam.me.uk

Provide a inline function which replaces the copy & pasta.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220415091921.072296632@linutronix.de

Accessing timekeeper::offset_boot in ktime_get_boot_fast_ns() is an
intended data race as the reader side cannot synchronize with a writer and
there is no space in struct tk_read_base of the NMI safe timekeeper.

Mark it so.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220415091920.956045162@linutronix.de

When tick_nohz_stop_tick() stops the tick and high resolution timers are
disabled, then the clock event device is not put into ONESHOT_STOPPED
mode. This can lead to spurious timer interrupts with some clock event
device drivers that don't shut down entirely after firing.

Eliminate these by putting the device into ONESHOT_STOPPED mode at points
where it is not being reprogrammed. When there are no timers active, then
tick_program_event() with KTIME_MAX can be used to stop the device. When
there is a timer active, the device can be stopped at the next tick (any
new timer added by timers will reprogram the tick).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220422141446.915024-1-npiggin@gmail.com

Pull in the NMI safe TAI accessor which was provided for the tracing tree
to prepare for further changes in this area.

Introduce fast/NMI safe accessor to clock tai for tracing. The Linux kernel
tracing infrastructure has support for using different clocks to generate
timestamps for trace events. Especially in TSN networks it's useful to have TAI
as trace clock, because the application scheduling is done in accordance to the
network time, which is based on TAI. With a tai trace_clock in place, it becomes
very convenient to correlate network activity with Linux kernel application
traces.

Use the same implementation as ktime_get_boot_fast_ns() does by reading the
monotonic time and adding the TAI offset. The same limitations as for the fast
boot implementation apply. The TAI offset may change at run time e.g., by
setting the time or using adjtimex() with an offset. However, these kind of
offset changes are rare events. Nevertheless, the user has to be aware and deal
with it in post processing.

An alternative approach would be to use the same implementation as
ktime_get_real_fast_ns() does. However, this requires to add an additional u64
member to the tk_read_base struct. This struct together with a seqcount is
designed to fit into a single cache line on 64 bit architectures. Adding a new
member would violate this constraint.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220414091805.89667-2-kurt@linutronix.de

Documentation of trace points timer_start, timer_expire_entry and
hrtimer_start lack always the last argument. Add it to keep implementation
and documentation in sync.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220411140115.24185-1-anna-maria@linutronix.de

clocksource_verify_percpu() calls cpumask_weight() to check if any bit of a
given cpumask is set.

This can be done more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220210224933.379149-24-yury.norov@gmail.com

Pull serial driver fix from Greg KH:
 "This is a single serial driver fix for a build issue that showed up
  due to changes that came in through the tty tree in 5.18-rc1 that were
  missed previously. It resolves a build error with the mpc52xx_uart
  driver.

  It has been in linux-next this week with no reported problems"

* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 5.18-rc2 that resolves an
  endian issue for the r8188eu driver. It has been in linux-next all
  this week with no reported problems"

* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Fix PPPoE tag insertion on little endian systems

Merge tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here are two small driver core changes for 5.18-rc2.

  They are the final bits in the removal of the default_attrs field in
  struct kobj_type. I had to wait until after 5.18-rc1 for all of the
  changes to do this came in through different development trees, and
  then one new user snuck in. So this series has two changes:

   - removal of the default_attrs field in the powerpc/pseries/vas code.

     The change has been acked by the PPC maintainers to come through
     this tree

   - removal of default_attrs from struct kobj_type now that all
     in-kernel users are removed.

     This cleans up the kobject code a little bit and removes some
     duplicated functionality that confused people (now there is only
     one way to do default groups)

  Both of these have been in linux-next for all of this week with no
  reported problems"

* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: kobj_type: remove default_attrs
  powerpc/pseries/vas: use default_groups in kobj_type

Pull char/misc driver fix from Greg KH:
 "A single driver fix. It resolves the build warning issue on 32bit
  systems in the habannalabs driver that came in during the 5.18-rc1
  merge cycle.

  It has been in linux-next for all this week with no reported problems"

* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: Fix test build failures

Pull powerpc fixes from Michael Ellerman:

 - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
   guest could be lost (or delayed until the next guest exit).

 - Disable SCV (system call vectored) when PR KVM guests could be run.

 - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
   guests.

 - Add a new KVM CAP to indicate if AIL == 3 is supported.

 - Fix a regression when hotplugging a CPU to a memoryless/cpuless node.

 - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
   fixes crashes seen due to hardened usercopy.

 - Revert a change to max_mapnr which broke HIGHMEM.

Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.

* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc: Set max_mapnr correctly"
  powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
  KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
  powerpc/numa: Handle partially initialized numa nodes
  powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
  KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
  KVM: PPC: Book3S PR: Disallow AIL != 0
  KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
  KVM: PPC: Book3S HV P9: Fix "lost kick" race

Pull irq fixes from Thomas Gleixner:
 "A set of interrupt chip driver fixes:

   - A fix for a long standing bug in the ARM GICv3 redistributor
     polling which uses the wrong bit number to test.

   - Prevent translation of bogus ACPI table entries which map device
     interrupts into the IPI space on ARM GICs.

   - Don't write into the pending register of ARM GICV4 before the scan
     in hardware has completed.

   - A set of build and correctness fixes for the Qualcomm MPM driver"

* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic, gic-v3: Prevent GSI to SGI translations
  irqchip/gic-v3: Fix GICR_CTLR.RWP polling
  irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
  irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
  irq/qcom-mpm: Fix build error without MAILBOX

Pull x86 fixes from Borislav Petkov:

 - Fix the MSI message data struct definition

 - Use local labels in the exception table macros to avoid symbol
   conflicts with clang LTO builds

 - A couple of fixes to objtool checking of the relatively newly added
   SLS and IBT code

 - Rename a local var in the WARN* macro machinery to prevent shadowing

* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/msi: Fix msi message data shadow struct
  x86/extable: Prefer local labels in .set directives
  x86,bpf: Avoid IBT objtool warning
  objtool: Fix SLS validation for kcov tail-call replacement
  objtool: Fix IBT tail-call detection
  x86/bug: Prevent shadowing in __WARN_FLAGS
  x86/mm/tlb: Revert retpoline avoidance approach

Pull perf fixes from Borislav Petkov:

 - A couple of fixes to cgroup-related handling of perf events

 - A couple of fixes to event encoding on Sapphire Rapids

 - Pass event caps of inherited events so that perf doesn't fail wrongly
   at fork()

 - Add support for a new Raptor Lake CPU

* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Always set cpuctx cgrp when enable cgroup event
  perf/core: Fix perf_cgroup_switch()
  perf/core: Use perf_cgroup_info->active to check if cgroup is active
  perf/core: Don't pass task around when ctx sched in
  perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
  perf/x86/intel: Don't extend the pseudo-encoding to GP counters
  perf/core: Inherit event_caps
  perf/x86/uncore: Add Raptor Lake uncore support
  perf/x86/msr: Add Raptor Lake CPU support
  perf/x86/cstate: Add Raptor Lake support
  perf/x86: Add Intel Raptor Lake support

Pull locking fixes from Borislav Petkov:

 - Allow the compiler to optimize away unused percpu accesses and change
   the local_lock_* macros back to inline functions

 - A couple of fixes to static call insn patching

* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "mm/page_alloc: mark pagesets as __maybe_unused"
  Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
  x86/percpu: Remove volatile from arch_raw_cpu_ptr().
  static_call: Remove __DEFINE_STATIC_CALL macro
  static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
  static_call: Don't make __static_call_return0 static
  x86,static_call: Fix __static_call_return0 for i386

Pull scheduler fixes from Borislav Petkov:

 - Use the correct static key checking primitive on the IRQ exit path

 - Two fixes for the new forceidle balancer

* tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
  sched: Teach the forced-newidle balancer about CPU affinity limitation.
  sched/core: Fix forceidle balancing

This is part of the effort to reduce kernel/sysctl.c to only contain the
core logic.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220215065019.7520-1-tangmeng@uniontech.com

To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.

To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable.
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Link: https://lore.kernel.org/r/20220331215707.883957-1-jakobkoschel@gmail.com

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix the clang command line option probing and remove some options to
   filter out, fixing the build with the latest clang versions

 - Fix 'perf bench' futex and epoll benchmarks to deal with machines
   with more than 1K CPUs

 - Fix 'perf test tsc' error message when not supported

 - Remap perf ring buffer if there is no space for event, fixing perf
   usage in 32-bit ChromeOS

 - Drop objdump stderr to avoid getting stuck waiting for stdout output
   in 'perf annotate'

 - Fix up garbled output by now showing unwind error messages when
   augmenting frame in best effort mode

 - Fix perf's libperf_print callback, use the va_args eprintf() variant

 - Sync vhost and arm64 cputype headers with the kernel sources

 - Fix 'perf report --mem-mode' with ARM SPE

 - Add missing external commands ('iiostat', etc) to 'perf --list-cmds'

* tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output
  perf tools: Add external commands to list-cmds
  perf docs: Add perf-iostat link to manpages
  perf session: Remap buf if there is no space for event
  perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K
  perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K
  perf tools: Fix perf's libperf_print callback
  perf: arm-spe: Fix perf report --mem-mode
  perf unwind: Don't show unwind error messages when augmenting frame pointer stack
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  perf test tsc: Fix error message when not supported
  perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
  perf python: Fix probing for some clang command line options
  tools build: Filter out options and warnings not supported by clang
  tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
  tools include UAPI: Sync linux/vhost.h with the kernel sources

Pull cxl and nvdimm fixes from Dan Williams:

 - Fix a compile error in the nvdimm unit tests

 - Fix a shadowed variable warning in the CXL PCI driver

* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  cxl/pci: Drop shadowed variable
  tools/testing/nvdimm: Fix security_init() symbol collision

Pull gpio fix from Bartosz Golaszewski:

 - fix a race condition with consumers accessing the fields of GPIO IRQ
   chips before they're fully initialized

* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: Restrict usage of GPIO chip irq members before initialization

Merge tag 'irqchip-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

 - Fix GICv3 polling for RWP in redistributors

 - Reject ACPI attempts to use SGIs on GIC/GICv3

 - Fix unpredictible behaviour when making a VPE non-resident
   with GICv4

 - A couple of fixes for the newly merged qcom-mpm driver

Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org

The level granularity round up of calc_index() does:

   (x + (1 << n)) >> n

which is obviously equivalent to

   (x >> n) + 1

but compilers can't figure that out despite the fact that the input range
is known to not cause an overflow. It's neither intuitive to read.

Just write out the obvious.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87h778j46c.ffs@tglx

When base::next_expiry_recalc is not initialized to false during cpu
bringup in HOTPLUG_CPU and is accidently true and no timer is queued in the
meantime, the loop through the wheel to find __next_timer_interrupt() might
be done for nothing.

Therefore initialize base::next_expiry_recalc to false in
timers_prepare_cpu().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20220405191732.7438-2-anna-maria@linutronix.de

When the timer base is empty, base::next_expiry is set to base::clk +
NEXT_TIMER_MAX_DELTA and base::next_expiry_recalc is false. When no timer
is queued until jiffies reaches base::next_expiry value, the warning for
not finding any expired timer and base::next_expiry_recalc is false in
__run_timers() triggers.

To prevent triggering the warning in this valid scenario
base::timers_pending needs to be added to the warning condition.

Fixes: 31cd0e11 ("timers: Recalculate next timer interrupt only when necessary")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20220405191732.7438-3-anna-maria@linutronix.de

If objdump writes to stderr it can block waiting for it to be read. As
perf doesn't read stderr then progress stops with perf waiting for
stdout output.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lexi Shao <shaolexi@huawei.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The `perf --list-cmds` output prints only internal commands, although
there is no reason for that from users' perspective.

Adding the external commands to commands array with NULL function
pointer allows printing all perf commands while not changing the logic
of command handler selection.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If a perf event doesn't fit into remaining buffer space return NULL to
remap buf and fetch the event again.

Keep the logic to error out on inadequate input from fuzzing.

This fixes perf failing on ChromeOS (with 32b userspace):

  $ perf report -v -i perf.data
  ...
  prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data?
  Error:
  failed to process sample

Fixes: 57fc032a ("perf session: Avoid infinite loop when seeing invalid header.size")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Denis Nikitin <denik@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull SCSI fixes from James Bottomley:

 - add support for new devices (ufs, mvsas)

 - a major set of fixes in lpfc

 - get rid of a driver specific ioctl in pcmraid

 - a major rework of aha152x to get rid of the scsi_pointer.

 - minor fixes and obvious changes including several spelling updates.

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
  scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
  scsi: ufs: ufshpb: Fix a NULL check on list iterator
  scsi: sd: Clean up gendisk if device_add_disk() failed
  scsi: message: fusion: Remove redundant variable dmp
  scsi: mvsas: Add PCI ID of RocketRaid 2640
  scsi: sd: sd_read_cpr() requires VPD pages
  scsi: mpt3sas: Fail reset operation if config request timed out
  scsi: sym53c500_cs: Stop using struct scsi_pointer
  scsi: ufs: ufs-pci: Add support for Intel MTL
  scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment
  scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use
  scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch"
  scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch"
  scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
  scsi: aic7xxx: Use standard PCI subsystem, subdevice defines
  scsi: ufs: qcom: Drop custom Android boot parameters
  scsi: core: sysfs: Remove comments that conflict with the actual logic
  scsi: hisi_sas: Remove stray fallthrough annotation
  scsi: virtio-scsi: Eliminate anonymous module_init & module_exit
  scsi: isci: Fix spelling mistake "doesnt" -> "doesn't"
  ...

The 'perf bench epoll' testcase fails on systems with more than 1K CPUs.

Testcase: perf bench epoll all

Result snippet:
<<>>
Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs.

perf: pthread_create: No such file or directory
<<>>

In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads
from respective bench_epoll_*  function. Though the logs shows direct
failure from pthread_create, the actual failure is from
"sched_setaffinity" returning EINVAL (invalid argument).

This happens because the default mask size in glibc is 1024. To overcome
this 1024 CPUs mask size limitation of cpu_set_t, change the mask size
using the CPU_*_S macros.

Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC
to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the
mask.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>