Tony Nguyen says:

====================
ice: add PTP auxiliary bus support

Michal Michalik says:

Auxiliary bus allows exchanging information between PFs, which allows
both fixing problems and simplifying new features implementation.
The auxiliary bus is enabled for all devices supported by ice driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, skbs generated by pktgen always have their reference count
incremented before transmission, causing their reference count to be
always greater than 1, leading to two issues:
  1. Only the code paths for shared skbs can be tested.
  2. In certain situations, skbs can only be released by pktgen.
To enhance testing comprehensiveness, we are introducing the "SHARED"
flag to indicate whether an SKB is shared. This flag is enabled by
default, aligning with the current behavior. However, disabling this
flag allows skbs with a reference count of 1 to be transmitted.
So we can test non-shared skbs and code paths where skbs are released
within the stack.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20230920125658.46978-2-liangchen.linux@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When specifying an unknown flag, it will print all available flags.
Currently, these flags are provided as fixed strings, which requires
manual updates when flags change. Replacing it with automated flag
enumeration.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20230920125658.46978-1-liangchen.linux@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

LL TEMAC IP is no longer supported. Hence add an entry marking the
driver as obsolete.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/20230920115047.31345-1-harini.katakam@amd.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Saeed Mahameed says:

====================
mlx5-updates-2023-09-19

Misc updates for mlx5 driver

1) From Erez, Add support for multicast forwarding to multi destination
   in bridge offloads with software steering mode (SMFS).

2) From Jianbo, Utilize the maximum aggregated link speed for police
   action rate.

3) From Moshe, Add a health error syndrome for pci data poisoned

4) From Shay, Enable 4 ports multiport E-switch

5) From Jiri, Trivial SF code cleanup

====================

Link: https://lore.kernel.org/r/20230920063552.296978-1-saeed@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Convert list_for_each() to list_for_each_entry() where applicable.

No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230919170409.1581074-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pedro Tammela says:

====================
selftests/tc-testing: parallel tdc

As the number of tdc tests is growing, so is our completion wall time.
One of the ideas to improve this is to run tests in parallel, as they
are self contained.

This series allows for tests to run in parallel, in batches of 32 tests.
Not all tests can run in parallel as they might conflict with each other.
The code will still honor this requirement even when trying to run the
tests over the worker pool.

In order to make this happen we had to localize the test resources
(patches 1 and 2), where instead of having all tests sharing one single
namespace and veths devices each test now gets it's own local namespace and devices.

Even though the tests serialize over rtnl_lock in the kernel, we
measured a speedup of about 3x in a test VM.
====================

Link: https://lore.kernel.org/r/20230919135404.1778595-1-pctammela@mojatatu.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Update the documentation to reflect the changes made to tdc with regards
to minimal requirements and test definitions expectations.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Use a Python process pool to run the tests in parallel.
Not all tests can run in parallel, for instance tests that are not
namespaced and tests that use netdevsim, as they can conflict with one
another.

The code logic will split the tests into serial and parallel.
For the parallel tests, we build batches of 32 tests and queue each
batch on the process pool. For the serial tests, they are queued as a
whole into the process pool, which in turn executes them concurrently
with the parallel tests.

Even though the tests serialize on rtnl_lock in the kernel, this feature
showed results with a ~3x speedup on the wall time for the entire test suite
running in a VM:
   Before - 4m32.502s
   After - 1m19.202s

Examples:
   In order to run tdc using 4 processes:
      ./tdc.py -J4 <...>
   In order to run tdc using 1 process:
      ./tdc.py -J1 <...> || ./tdc.py <...>

Note that the kernel configuration will affect the speed of the tests,
especially if such configuration slows down process creation and/or
fork().
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

With resources localized on a per test basis, some tests definitions
either contain redundant commands, were wrong or could be simplified.
Update all of them to match the new requirements.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

As of today, the current tdc architecture creates one netns and uses it
to run all tests. This assumption was embedded into the nsPlugin which
carried over as how the tests were written.

The tdc tests are by definition self contained and can,
theoretically, run in parallel. Even though in the kernel they will
serialize over the rtnl lock, we should expect a significant speedup of the
total wall time for the entire test suite, which is hitting close to
1100 tests at this point.

A first step to achieve this goal is to remove sharing of global resources like
veth/dummy interfaces and the netns. In this patch we 'localize' these
resources on a per test basis. Each test gets it's own netns, VETH/dummy interfaces.
The resources are spawned in the pre_suite phase, where tdc will prepare
all netns and interfaces for all tests. This is done in order to avoid
concurrency issues with netns / interfaces spawning and commands using
them. As tdc progresses, the resources are deleted after each test finishes
executing.

Tests that don't use the nsPlugin still run under the root namespace,
but are now required to manage any external resources like interfaces.
These cannot be parallelized as their definition doesn't allow it.
On the other hand, when using the nsPlugin, tests don't need to create
dummy/veth interfaces as these are handled already.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
NRZ in their EEPROM.

The module also require the ignore tx fault fixup similar to Huawei MA5671A
as it gets disabled on error messages with serial redirection enabled.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Petr Machata says:

====================
mlxsw: Improve blocks selection for IPv6 multicast forwarding

Amit Cohen writes:

The driver configures two ACL regions during initialization, these regions
are used for IPv4 and IPv6 multicast forwarding. Entries residing in these
two regions match on the {SIP, DIP, VRID} key elements.

Currently for IPv6 region, 9 key blocks are used. This can be improved by
reducing the amount key blocks needed for the IPv6 region to 8. It is
possible to use key blocks that mix subsets of the VRID element with
subsets of the DIP element.

To make this happen, we have to take in account the algorithm that chooses
which key blocks will be used. It is lazy and not the optimal one as it is
a complex task. It searches the block that contains the most elements that
are required, chooses it, removes the elements that appear in the chosen
block and starts again searching the block that contains the most elements.

To optimize the nubmber of the blocks for IPv6 multicast forwarding, handle
the following:

1. Add support for key blocks that mix subsets of the VRID element with
subsets of the DIP element.

2. Prevent the algorithm from chosing another blocks for VRID.
Currently, we have the block 'ipv4_4' which contains 2 sub-elements of
VRID. With the existing algorithm, this block might be chosen, then 8
blocks must be chosen for SIP and DIP and we will get 9 blocks to match on
{SIP, DIP, VRID}. Therefore, replace this block with a new block 'ipv4_5'
that contains 1 element for VRID, this will not be chosen for IPv6 as VRID
element will be broken to several sub-elements. In this way we can get 8
blocks for IPv6 multicast forwarding.

This improvement was tested and indeed 8 blocks are used instead of 9.

v2:
- Resending without changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Two ACL regions that are configured by the driver during initialization are
the ones used for IPv4 and IPv6 multicast forwarding. Entries residing
in these two regions match on the {SIP, DIP, VRID} key elements.

Currently for IPv6 region, 9 key blocks are used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 4 for DIP - 'ipv4_0', 'ipv6_{0,1,2/2b}'
* 1 for VRID - 'ipv4_4b'

This can be improved by reducing the amount key blocks needed for
the IPv6 region to 8. It is possible to use key blocks that mix subsets of
the VRID element with subsets of the DIP element.
The following key blocks can be used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 1 for subset of DIP - 'ipv4_0'
* 3 for the rest of DIP and subsets of VRID - 'ipv6_{0,1,2/2b}'

To make this happen, add VRID sub-elements as part of existing keys -
'ipv6_{0,1,2/2b}'. Note that one of the sub-elements is called
VRID_ROUTER_MSB and does not contain bit numbers like the rest, as for
Spectrum < 4 this element represents bits 8-10 and for Spectrum-4 it
represents bits 8-11.

Breaking VRID into 3 sub-elements makes the driver use one less block in
IPv6 region for multicast forwarding. The sub-elements can be filled in
blocks that are used for destination IP.

The algorithm in the driver that chooses which key blocks will be used is
lazy and not the optimal one. It searches the block that contains the most
elements that are required, chooses it, removes the elements that appear
in the chosen block and starts again searching the block that contains the
most elements.

When key block 'ipv4_4' is defined, the algorithm might choose it, as it
contains 2 sub-elements of VRID, then 8 blocks must be chosen for SIP and
DIP and we get 9 blocks to match on {SIP, DIP, VRID}. That is why we had to
remove key block 'ipv4_4' in a previous patch and use key block that
contains one field for VRID.

This improvement was tested and indeed 8 blocks are used instead of 9.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The previous patch replaced the key block 'ipv4_4' with 'ipv4_5'. The
corresponding block for Spectrum-4 is 'ipv4_4b'. To be consistent, replace
key block 'ipv4_4b' with 'ipv4_5b'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently virtual router ID element is broken to two sub-elements -
'VIRT_ROUTER_LSB' and 'VIRT_ROUTER_MSB'. It was broken as this field is
broken in 'ipv4_4' flex key which is used for IPv4 in Spectrum < 4.
For Spectrum-4, we use 'ipv4_4b' flex key which contains one field for
virtual router, this key is not supported in older ASICs.

Add 'ipv4_5' flex key which is supported in all ASICs and contains one
field for virtual router. Then there is no reason to use 'VIRT_ROUTER_LSB'
and 'VIRT_ROUTER_MSB', remove them and add one element 'VIRT_ROUTER' for
this field.

The motivation is to get rid of 'ipv4_4' flex key, as it might be chosen
for IPv6 multicast forwarding region. This will not allow the improvement
in a following patch. See more details in the cover letter and in a
following patch.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig help text for baycom drivers suggests that more information
on the hardware can be found at <https://www.baycom.de>. The website now
includes no information on their ham radio products other than a mention
that they were once produced by the company, saying:
"The amateur radio equipment is now no longer part and business of BayCom GmbH"

As there is no information relavent to the baycom driver on the site,
remove the link.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.

No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE

   - netfilter: fix entries val in rule reset audit log

   - eth: stmmac: fix incorrect rxq|txq_stats reference

  Previous releases - regressions:

   - ipv4: fix null-deref in ipv4_link_failure

   - netfilter:
      - fix several GC related issues
      - fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP

   - eth: team: fix null-ptr-deref when team device type is changed

   - eth: i40e: fix VF VLAN offloading when port VLAN is configured

   - eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB

  Previous releases - always broken:

   - core: fix ETH_P_1588 flow dissector

   - mptcp: fix several connection hang-up conditions

   - bpf:
      - avoid deadlock when using queue and stack maps from NMI
      - add override check to kprobe multi link attach

   - hsr: properly parse HSRv1 supervisor frames.

   - eth: igc: fix infinite initialization loop with early XDP redirect

   - eth: octeon_ep: fix tx dma unmap len values in SG

   - eth: hns3: fix GRE checksum offload issue"

* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
  igc: Expose tx-usecs coalesce setting to user
  octeontx2-pf: Do xdp_do_flush() after redirects.
  bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
  net: ena: Flush XDP packets on error.
  net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
  net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
  netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
  netfilter: nf_tables: fix memleak when more than 255 elements expired
  netfilter: nf_tables: disable toggling dormant table state more than once
  vxlan: Add missing entries to vxlan_get_size()
  net: rds: Fix possible NULL-pointer dereference
  team: fix null-ptr-deref when team device type is changed
  net: bridge: use DEV_STATS_INC()
  net: hns3: add 5ms delay before clear firmware reset irq source
  net: hns3: fix fail to delete tc flower rules during reset issue
  net: hns3: only enable unicast promisc when mac table full
  net: hns3: fix GRE checksum offload issue
  net: hns3: add cmdq check for vf periodic service task
  net: stmmac: fix incorrect rxq|txq_stats reference
  ...

Pull finegrained timestamp reverts from Christian Brauner:
 "Earlier this week we sent a few minor fixes for the multi-grained
  timestamp work in [1]. While we were polishing those up after Linus
  realized that there might be a nicer way to fix them we received a
  regression report in [2] that fine grained timestamps break gnulib
  tests and thus possibly other tools.

  The kernel will elide fine-grain timestamp updates when no one is
  actively querying for them to avoid performance impacts. So a sequence
  like write(f1) stat(f2) write(f2) stat(f2) write(f1) stat(f1) may
  result in timestamp f1 to be older than the final f2 timestamp even
  though f1 was last written too but the second write didn't update the
  timestamp.

  Such plotholes can lead to subtle bugs when programs compare
  timestamps. For example, the nap() function in [2] will estimate that
  it needs to wait one ns on a fine-grain timestamp enabled filesytem
  between subsequent calls to observe a timestamp change. But in general
  we don't update timestamps with more than one jiffie if we think that
  no one is actively querying for fine-grain timestamps to avoid
  performance impacts.

  While discussing various fixes the decision was to go back to the
  drawing board and ultimately to explore a solution that involves only
  exposing such fine-grained timestamps to nfs internally and never to
  userspace.

  As there are multiple solutions discussed the honest thing to do here
  is not to fix this up or disable it but to cleanly revert. The general
  infrastructure will probably come back but there is no reason to keep
  this code in mainline.

  The general changes to timestamp handling are valid and a good cleanup
  that will stay. The revert is fully bisectable"

Link: https://lore.kernel.org/all/20230918-hirte-neuzugang-4c2324e7bae3@brauner [1]
Link: https://lore.kernel.org/all/bf0524debb976627693e12ad23690094e4514303.camel@linuxfromscratch.org [2]

* tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  Revert "fs: add infrastructure for multigrain timestamps"
  Revert "btrfs: convert to multigrain timestamps"
  Revert "ext4: switch to multigrain timestamps"
  Revert "xfs: switch to multigrain timestamps"
  Revert "tmpfs: add support for multigrain timestamps"

Pull powerpc fixes from Michael Ellerman:

 - A fix for breakpoint handling which was using get_user() while atomic

 - Fix the Power10 HASHCHK handler which was using get_user() while
   atomic

 - A few build fixes for issues caused by recent changes

Thanks to Benjamin Gray, Christophe Leroy, Kajol Jain, and Naveen N Rao.

* tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/dexcr: Move HASHCHK trap handler
  powerpc/82xx: Select FSL_SOC
  powerpc: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION and FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
  powerpc/watchpoints: Annotate atomic context in more places
  powerpc/watchpoint: Disable pagefaults when getting user instruction
  powerpc/watchpoints: Disable preemption in thread_change_pc()
  powerpc/perf/hv-24x7: Update domain value check

Pull xen fixes from Juergen Gross:

 - remove some unused functions in the Xen event channel handling

 - fix a regression (introduced during the merge window) when booting as
   Xen PV guest

 - small cleanup removing another strncpy() instance

* tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/efi: refactor deprecated strncpy
  x86/xen: allow nesting of same lazy mode
  x86/xen: move paravirt lazy code
  arm/xen: remove lazy mode related definitions
  xen: simplify evtchn_do_upcall() call maze

Pull memblock test fixes from Mike Rapoport:
 "Fix several compilation errors and warnings in memblock tests"

* tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
  memblock tests: fix warning: "__ALIGN_KERNEL" redefined
  memblock tests: Fix compilation errors.

Pull sound fixes from Takashi Iwai:
 "A large collection of fixes around this time.

  All small and mostly trivial fixes.

   - Lots of fixes for the new -Wformat-truncation warnings

   - A fix in ALSA rawmidi core regression and UMP handling

   - Series of Cirrus codec fixes

   - ASoC Intel and Realtek codec fixes

   - Usual HD- and USB-audio quirks and AMD ASoC quirks"

* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
  ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
  ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
  ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
  ALSA: rawmidi: Fix NULL dereference at proc read
  ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
  ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
  ASoC: cs42l43: Add shared IRQ flag for shutters
  ASoC: imx-audmix: Fix return error with devm_clk_get()
  ASoC: hdaudio.c: Add missing check for devm_kstrdup
  ALSA: riptide: Fix -Wformat-truncation warning for longname string
  ALSA: cs4231: Fix -Wformat-truncation warning for longname string
  ALSA: ad1848: Fix -Wformat-truncation warning for longname string
  ALSA: hda: generic: Check potential mixer name string truncation
  ALSA: cmipci: Fix -Wformat-truncation warning
  ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
  ALSA: firewire: Fix -Wformat-truncation warning for longname string
  ALSA: xen: Fix -Wformat-truncation warning
  ALSA: opti9x: Fix -Wformat-truncation warning
  ALSA: es1688: Fix -Wformat-truncation warning
  ALSA: cs4236: Fix -Wformat-truncation warning
  ...

Merge tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "One patch to drop a non-existent alarm attribute in the nct6775 driver"

* tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6775) Fix non-existent ALARM warning

Don't populate read-only const arrays on the stack, instead make them
static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230919093606.24446-1-colin.i.king@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

./drivers/dpll/dpll_netlink.c:847:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6605Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309190540.RFwfIgO7-lkp@intel.com/
Link: https://lore.kernel.org/r/20230919010305.120991-1-yang.lee@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Arseniy Krasnov says:

====================
vsock/virtio/vhost: MSG_ZEROCOPY preparations

this patchset is first of three parts of another big patchset for
MSG_ZEROCOPY flag support:
https://lore.kernel.org/netdev/20230701063947.3422088-1-AVKrasnov@sberdevices.ru/

During review of this series, Stefano Garzarella <sgarzare@redhat.com>
suggested to split it for three parts to simplify review and merging:

1) virtio and vhost updates (for fragged skbs) <--- this patchset
2) AF_VSOCK updates (allows to enable MSG_ZEROCOPY mode and read
   tx completions) and update for Documentation/.
3) Updates for tests and utils.

This series enables handling of fragged skbs in virtio and vhost parts.
Newly logic won't be triggered, because SO_ZEROCOPY options is still
impossible to enable at this moment (next bunch of patches from big
set above will enable it).
====================

Link: https://lore.kernel.org/r/20230916130918.4105122-1-avkrasnov@salutedevices.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This adds handling of MSG_ZEROCOPY flag on transmission path:

1) If this flag is set and zerocopy transmission is possible (enabled
   in socket options and transport allows zerocopy), then non-linear
   skb will be created and filled with the pages of user's buffer.
   Pages of user's buffer are locked in memory by 'get_user_pages()'.
2) Replaces way of skb owning: instead of 'skb_set_owner_sk_safe()' it
   calls 'skb_set_owner_w()'. Reason of this change is that
   '__zerocopy_sg_from_iter()' increments 'sk_wmem_alloc' of socket, so
   to decrease this field correctly, proper skb destructor is needed:
   'sock_wfree()'. This destructor is set by 'skb_set_owner_w()'.
3) Adds new callback to 'struct virtio_transport': 'can_msgzerocopy'.
   If this callback is set, then transport needs extra check to be able
   to send provided number of buffers in zerocopy mode. Currently, the
   only transport that needs this callback set is virtio, because this
   transport adds new buffers to the virtio queue and we need to check,
   that number of these buffers is less than size of the queue (it is
   required by virtio spec). vhost and loopback transports don't need
   this check.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

For tap device new skb is created and data from the current skb is
copied to it. This adds copying data from non-linear skb to new
the skb.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

For non-linear skb use its pages from fragment array as buffers in
virtio tx queue. These pages are already pinned by 'get_user_pages()'
during such skb creation.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Florian Westphal says:

====================
netfilter updates for net

The following three patches fix regressions in the netfilter subsystem:

1. Reject attempts to repeatedly toggle the 'dormant' flag in a single
   transaction.  Doing so makes nf_tables lose track of the real state
   vs. the desired state.  This ends with an attempt to unregister hooks
   that were never registered in the first place, which yields a splat.

2. Fix element counting in the new nftables garbage collection infra
   that came with 6.5:  More than 255 expired elements wraps a counter
   which results in memory leak.

3. Since 6.4 ipset can BUG when a set is renamed while a CREATE command
   is in progress, fix from Jozsef Kadlecsik.

* tag 'nf-23-09-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
  netfilter: nf_tables: fix memleak when more than 255 elements expired
  netfilter: nf_tables: disable toggling dormant table state more than once
====================

Link: https://lore.kernel.org/r/20230920084156.4192-1-fw@strlen.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Several places in TC offload code assumed that the return from
 rhashtable_lookup_get_insert_fast() was always either NULL or a valid
 pointer to an existing entry, but in fact that function can return an
 error pointer.  In that case, perform the usual cleanup of the newly
 created entry, then pass up the error, rather than attempting to take a
 reference on the old entry.

Fixes: d902e1a7 ("sfc: bare bones TC offload on EF100")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230919183949.59392-1-edward.cree@amd.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.

Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.

This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.

How to test:
User can get the coalesce value using ethtool command.

Example command:
Get: ethtool -c <interface>

Previous output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

New output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

Fixes: 8c5ad0da ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sebastian Andrzej Siewior says:

====================
Add missing xdp_do_flush() invocations.

I've been looking at the drivers/ XDP users and noticed that some
XDP_REDIRECT user don't invoke xdp_do_flush() at the end.
====================

Link: https://lore.kernel.org/r/20230918153611.165722-1-bigeasy@linutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

xdp_do_flush() should be invoked before leaving the NAPI poll function
if XDP-redirect has been performed.

Invoke xdp_do_flush() before leaving NAPI.

Cc: Geetha sowjanya <gakula@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Fixes: 06059a1a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.

Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.

Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

xdp_do_flush() should be invoked before leaving the NAPI poll function
after a XDP-redirect. This is not the case if the driver leaves via
the error path (after having a redirect in one of its previous
iterations).

Invoke xdp_do_flush() also in the error path.

Cc: Arthur Kiyanovski <akiyano@amazon.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Fixes: a318c70a ("net: ena: introduce XDP redirect implementation")
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull media fixes from Mauro Carvalho Chehab:

 - driver fixes due to incorrect fwnode_handle_put() call

 - bt8xx: bttv_risc_packed(): remove field checks

 - vb2: frame_vector.c: replace WARN_ONCE with a comment

 - imx219: a couple typo fixes and perform a full mode set
   unconditionally

 - uvcvideo: Fix OOB read

 - some dependency fixes

* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
  media: vb2: frame_vector.c: replace WARN_ONCE with a comment
  media: uvcvideo: Fix OOB read
  media: bt8xx: bttv_risc_packed(): remove field checks
  media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
  media: i2c: imx219: Perform a full mode set unconditionally
  media: i2c: imx219: Fix crop rectangle setting when changing format
  media: i2c: imx219: Fix a typo referring to a wrong variable
  media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
  media: ivsc: Depend on VIDEO_DEV
  media: via: Use correct dependency for camera sensor drivers
  media: v4l: Use correct dependency for camera sensor drivers
  media: pci: ivsc: Select build dependencies