The current code uses calls from the HDA Codec driver to
determine when to suspend/resume by calling hooks via the
hda_component binding.
However, this means the cs35l41 driver relies on the HDA
Codec driver to tell it when to suspend or resume,
creating an additional external dependency, and potentially
creating race conditions in the future. It is better for
the cs35l41 hda driver to decide for itself when the part
should be suspended or resumed.
This makes supporting system suspend easier.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-5-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Redesign the creation of ALSA controls so that the cs_dsp
pwr_lock is not held when calling snd_ctl_add(). Instead of
creating the ALSA control from the cs_dsp control_add callback,
do it after cs_dsp_power_up() has completed. The existing
functions are changed to return void instead of passing errors
back - this duplicates the original behaviour, as cs_dsp does
not abort firmware load if creation of a control fails.

It is safe to walk the control list without taking any mutex
provided that the caller is not trying to load a new firmware
or remove the driver in parallel. There is no other situation
that the list can change. So the caller can trigger creation
of ALSA controls after cs_dsp_power_up() has returned. A cs_dsp
control will have a non-NULL priv pointer if we have created
an ALSA control.

With the previous code the ALSA controls were created from
the cs_dsp control_add callback. But this is called with
pwr_lock held (as it is part of the DSP power-up sequence).
The kernel lock checking will show a mutex inversion between
this and the control creation path:

control_add
  pwr_lock held, takes controls_rwsem (in snd_ctl_add)

get/put
  controls_rwsem held, takes pwr_lock to call cs_dsp.

This is not completely theoretical. Although the time window
is very small, it is possible for these to run in parallel
and deadlock the old implementation.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-4-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

These apis require the pwr_lock to be held.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-3-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The cs_dsp core will return an error if passed a NULL cs_dsp struct so
there is no need for the hda_cs_dsp_write|read_ctl functions to manually
check that. The cs_dsp core will also check the data is within bounds of
the control so the additional bounds check is redundant too. Simplify
things a bit by removing said code.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-2-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We took sound_oss_mutex around the calls of unregister_sound_special()
at unregistering OSS devices.  This may, however, lead to a deadlock,
because we manage the card release via the card's device object, and
the release may happen at unregister_sound_special() call -- which
will take sound_oss_mutex again in turn.

Although the deadlock might be fixed by relaxing the rawmidi mutex in
the previous commit, it's safer to move unregister_sound_special()
calls themselves out of the sound_oss_mutex, too.  The call is
race-safe as the function has a spinlock protection by itself.

Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The register_mutex taken around the dev_unregister callback call in
snd_rawmidi_free() may potentially lead to a mutex deadlock, when OSS
emulation and a hot unplug are involved.

Since the mutex doesn't protect the actual race (as the registration
itself is already protected by another means), let's drop it.

Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch fixes the issue with 3.5mm headset keys
on RPL-P platform.

[ Rearranged the entry in SSID order by tiwai ]
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Ninad Naik <ninad.naik@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011044916.2278867-1-saranya.gopal@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The ASUS ROG X16 (GV601R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.

Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010070347.36883-1-luke@ljones.devSigned-off-by: Takashi Iwai <tiwai@suse.de>

The initial fix for ASUS G533Z was based on faulty information. This
fixes the pincfg to values that have been verified with no existing
module options or other hacks enabled.

Enables headphone jack, and 5.1 surround.

[ corrected the indent level by tiwai ]

Fixes: bc2c2354 ("ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010065702.35190-1-luke@ljones.devSigned-off-by: Takashi Iwai <tiwai@suse.de>

After splitting to snd_usb_endpoint_set_params() and *_prepare(), the
skip of each function should be checked with different flags, while we
still use ep->need_setup as the single one.  Introduce
ep->need_prepare for indicating the need of prepare, and also add the
missing check of ep->need_setup at the set_params.

Fixes: 2be79d58 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare (take#2)")
Link: https://lore.kernel.org/r/20221009104212.18877-5-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

snd_usb_endpoint_set_params() should return zero for a success, but
currently it returns the sample rate.  Correct it.

Fixes: 2be79d58 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare (take#2)")
Link: https://lore.kernel.org/r/20221009104212.18877-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The protection with chip->mutex was lost after splitting
snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare().
Apply the same mutex again to the former function.

Fixes: 2be79d58 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare (take#2)")
Link: https://lore.kernel.org/r/20221009104212.18877-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We toggle USB interface at PCM prepare and reset at close.  When the
PCM isn't prepared, resetting again makes little sense.
Check the current altset and avoid unnecessary interface reset at EP
close.

Link: https://lore.kernel.org/r/20221009104212.18877-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Recent commit d9185705 ("ALSA: hda: Rework snd_hdac_stream_reset() to use macros")
missed that on some devices register access needs to be done with
unaligned access helper. Change polling macros to use
read_poll_timeout_atomic() in order to specify register read function.

Fixes: d9185705 ("ALSA: hda: Rework snd_hdac_stream_reset() to use macros")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/alsa-devel/20220818141517.109280-1-amadeuszx.slawinski@linux.intel.com/T/#m1270737db52b5ef163eff73cb5f862d16a07a428Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221007084856.1638302-1-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

After some feedback from users with Dell Precision 5530 machines, this
patch reverts the previous change to add ALC289_FIXUP_DUAL_SPK.
While it improved the speaker output quality, it caused the headphone
jack to have an audible "pop" sound when power saving was toggled.

Fixes: 1885ff13 ("ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop")
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yz0uyN1zwZhnyRD6@piranhaSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.1

This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:

 - A new string helper parse_int_array_user().
 - Improvements to the SOF IPC4 code, especially around trace.
 - Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
   systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
   MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
   and Texas Instruments SRC4392

There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.

Hans reported that his Sony VAIO VPX11S1E showed the broken sound
behavior at the start of the stream for a couple of seconds, and it
turned out that the position_fix=1 option fixes the issue.  It implies
that the position reporting is inaccurate, and very likely hitting on
all Poulsbo devices.

The patch applies the workaround for Poulsbo generically to switch to
LPIB mode instead of the default position buffer.
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3e8697e1-87c6-7a7b-d2e8-b21f1d2f181b@redhat.com
Link: https://lore.kernel.org/r/20221001142124.7241-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HDMI driver skips the notification handling from the graphics
driver when the codec driver is being in the PM operation.  This
behavior was introduced by the commit eb399d3c ("ALSA: hda - Skip
ELD notification during PM process").  This skip may cause a problem,
as we may miss the ELD update when the connection/disconnection
happens right at the runtime-PM operation of the audio codec.

Although this workaround was valid at that time, it's no longer true;
the fix was required just because the ELD update procedure needed to
wake up the audio codec, which had lead to a runtime-resume during a
runtime-suspend.  Meanwhile, the ELD update procedure doesn't need a
codec wake up any longer since the commit 788d441a ("ALSA: hda -
Use component ops for i915 HDMI/DP audio jack handling"); i.e. there
is no much reason for skipping the notification.

Let's drop those checks for addressing the missing notification.

Fixes: 788d441a ("ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling")
Reported-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220927135807.4097052-1-brent.lu@intel.com
Link: https://lore.kernel.org/r/20221001074809.7461-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.0-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Last fixes for v6.0

In the even that there's another pull request here's some more driver
specific fixes.

1. Uses regmap_read_poll_timeout_atomic to poll I2S_CLR as it is called
   within a spin lock.

2. Fixes the typo of break condition in regmap_read_poll_timeout_atomic.

Fixes: fbb0ec65 ("ASoC: rockchip: i2s: use regmap_read_poll_timeout to poll I2S_CLR")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220930151546.2017667-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Document dai-tdm-slot-num and dai-tdm-slot-width props as those are
parsed by simple graph card and may therefore appear in audio OF graph
node.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220927185359.294322-1-marex@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

SND_SOC_QDSP6 already has COMPILE_TEST so remove that from
SND_SOC_SC8280XP and also add QCOM_APR dependencies to
SND_SOC_SC8280XP like other Qualcomm machine drivers.

This should also fix below warning:
on x86_64, when QCOM_APR is not set and COMPILE_TEST=y:

WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
	&& SND_SOC_QCOM [=y] && QCOM_APR [=n] && COMMON_CLK [=y]
  Selected by [y]:
  - SND_SOC_SC8280XP [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
	&& SND_SOC_QCOM [=y] && (QCOM_APR [=n] || COMPILE_TEST [=y]) &&
	 SOUNDWIRE [=y] && COMMON_CLK [=y]

Fixes: 295aeea6 ("ASoC: qcom: add machine driver for sc8280xp")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220930105347.41127-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When the driver hits -ENOMEM at allocating a URB or a buffer, it
aborts and goes to the error path that releases the all previously
allocated resources.  However, when -ENOMEM hits at the middle of the
sync EP URB allocation loop, the partially allocated URBs might be
left without released, because ep->nurbs is still zero at that point.

Fix it by setting ep->nurbs at first, so that the error handler loops
over the full URB list.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930100151.19461-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

At an error path to release URB buffers and contexts, the driver might
hit a NULL dererence for u->urb pointer, when u->buffer_size has been
already set but the actual URB allocation failed.

Fix it by adding the NULL check of urb.  Also, make sure that
buffer_size is cleared after the error path or the close.

Cc: <stable@vger.kernel.org>
Reported-by: Sabri N. Ferreiro <snferreiro1@gmail.com>
Link: https://lore.kernel.org/r/CAKG+3NRjTey+fFfUEGwuxL-pi_=T4cUskYG9OzpzHytF+tzYng@mail.gmail.com
Link: https://lore.kernel.org/r/20220930100129.19445-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The ASoC core automatically populates the driver name field in the card
from the card name if left unset. However, since the driver name can be
at most 16 characters long, wrapping will happen if the card name is
longer, which is the case for the mt8192-mt6359 driver.

Explicitly set the driver name for the card in order to avoid said
wrapping and have a readable driver name exposed to userspace.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220929205453.1144142-1-nfraprado@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

As the previous commit implies, a system may have a different SPI bus
number that is embedded in the device string.  And, assuming the fixed
bus number is rather fragile; it may be assigned differently depending
on the configuration or on the boot environment.  Once when a bus
number change happens, the binding fails, resulting in the silence.

This patch tries to make the matching a bit more relaxed, allowing to
bind with a different bus number (or without it).  So the previous
fix, the introduction of ALC245_FIXUP_CS35L41_SPI1_2 fixup became
superfluous, and this is unified to ALC245_FIXUP_CS35L41_SPI_2.

Fixes: 225f6e1b ("ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model")
Link: https://lore.kernel.org/r/20220930084810.10435-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This flag could be removed since we now have API to query bclk
fequency setting in the topology. The dai link structure itself also
provides DAI format information instead of figuring it out with fs
number.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913074906.926774-1-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Support TDM format for NAU88L25.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220930072804.2524352-1-CTLIN0@nuvoton.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Zhang Qilong <zhangqilong3@huawei.com>:

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of probe.

Zhang Qilong (4):
  ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
  ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
  ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
  ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe

 sound/soc/codecs/mt6660.c | 8 ++++++--
 sound/soc/codecs/wm5102.c | 6 +++---
 sound/soc/codecs/wm5110.c | 6 +++---
 sound/soc/codecs/wm8997.c | 6 +++---
 4 files changed, 15 insertions(+), 11 deletions(-)

--
2.25.1

The driver field in the struct snd_ctl_card_info is a valid
user space identifier. Actually, many ASoC drivers do not care
and let to initialize this field using a standard wrapping method.
Unfortunately, in this way, this field becomes unusable and
unreadable for the drivers with longer card names. Also,
there is a possibility to have clashes (driver field has
only limit of 15 characters).

This change will print an error when the wrapping is used.
The developers of the affected drivers should fix the problem.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of mt6660_i2c_probe.

Fixes:f289e55c ("ASoC: Add MediaTek MT6660 Speaker Amp Driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-5-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5102_probe.

Fixes:93e8791d ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-4-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5110_probe.

Fixes:5c6af635 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-3-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm8997_probe

Fixes:40843aea ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-2-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

This reverts commit ddea4bbf ("ASoC:
wcd-mbhc-v2: use pm_runtime_resume_and_get()"), because it introduced
double runtime PM put if pm_runtime_get_sync() returns -EACCES:

  wcd934x-codec wcd934x-codec.3.auto: WCD934X Minor:0x1 Version:0x401
  wcd934x-codec wcd934x-codec.3.auto: Runtime PM usage count underflow!

The commit claimed no changes in functionality except dropping the
reference on -EACCESS.  This is exactly the change introducing bug
because function calls unconditionally pm_runtime_put_autosuspend() at
the end.

Fixes: ddea4bbf ("ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220929131528.217502-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

There are some spelling mistakes in dev_err messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220928220417.66799-1-colin.i.king@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

HP Zbook Firefly 14 G9 model (103c:8abb) requires yet another binding
with CS35L41 codec, but with a slightly different configuration.  It's
over spi1 instead of spi0.  Create a new fixup entry for that.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220929061455.13355-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

After commit 3285ea10("ALSA: asihpi - Interrelated HPI tidy up."),
struct hpi_subsys_response is not used any more and can be removed as well.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20220928084833.61131-1-yuancan@huawei.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use DIV_ROUND_UP() instead of open-coding it, which intents and makes
it more clear what is going on for the casual reviewer.

The Coccinelle references Commit e4d8aef2 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927141110.18033-1-shangxiaojing@huawei.comSigned-off-by: Takashi Iwai <tiwai@suse.de>