A commit adding back the stopping of tx on port shutdown failed to add
back the locking which had also been removed by commit e8376633
("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART
shutdown").

Holding the port lock is needed to serialise against the console code,
which may update the interrupt enable register and access the port
state.

Fixes: d8aca2f9 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown")
Fixes: 947cc4ec ("serial: qcom-geni: fix soft lockup on sw flow control and suspend")
Cc: stable@vger.kernel.org	# 6.3
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-4-johan+linaro@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 35781d83.

Hibernation is not supported on Qualcomm platforms with mainline
kernels yet a broken vendor implementation for the GENI serial driver
made it upstream.

This is effectively dead code that cannot be tested and should just be
removed, but if these paths were ever hit for an open non-console port
they would crash the machine as the driver would fail to enable clocks
during restore() (i.e. all ports would have to be closed by drivers and
user space before hibernating the system to avoid this as a comment in
the code hinted at).

The broken implementation also added a random call to enable the
receiver in the port setup code where it does not belong and which
enables the receiver prematurely for console ports.

Fixes: 35781d83 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
Cc: stable@vger.kernel.org	# 6.2
Cc: Aniket Randive <quic_arandive@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-3-johan+linaro@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The polled console (KGDB/KDB) implementation must not call port setup
unconditionally as the port may already be in use by the console or a
getty.

Only make sure that the receiver is enabled, but do not enable any
device interrupts.

Fixes: d8851a96 ("tty: serial: qcom-geni-serial: Add a poll_init() function")
Cc: stable@vger.kernel.org	# 6.4
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-2-johan+linaro@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When sending data using DMA at high baudrate (4 Mbdps in local test case) to
a device with small RX buffer which keeps asserting RTS after every received
byte, it is possible that the iMX UART driver would not recognize the falling
edge of RTS input signal and get stuck, unable to transmit any more data.

This condition happens when the following sequence of events occur:
- imx_uart_mctrl_check() is called at some point and takes a snapshot of UART
  control signal status into sport->old_status using imx_uart_get_hwmctrl().
  The RTSS/TIOCM_CTS bit is of interest here (*).
- DMA transfer occurs, the remote device asserts RTS signal after each byte.
  The i.MX UART driver recognizes each such RTS signal change, raises an
  interrupt with USR1 register RTSD bit set, which leads to invocation of
  __imx_uart_rtsint(), which calls uart_handle_cts_change().
  - If the RTS signal is deasserted, uart_handle_cts_change() clears
    port->hw_stopped and unblocks the port for further data transfers.
  - If the RTS is asserted, uart_handle_cts_change() sets port->hw_stopped
    and blocks the port for further data transfers. This may occur as the
    last interrupt of a transfer, which means port->hw_stopped remains set
    and the port remains blocked (**).
- Any further data transfer attempts will trigger imx_uart_mctrl_check(),
  which will read current status of UART control signals by calling
  imx_uart_get_hwmctrl() (***) and compare it with sport->old_status .
  - If current status differs from sport->old_status for RTS signal,
    uart_handle_cts_change() is called and possibly unblocks the port
    by clearing port->hw_stopped .
  - If current status does not differ from sport->old_status for RTS
    signal, no action occurs. This may occur in case prior snapshot (*)
    was taken before any transfer so the RTS is deasserted, current
    snapshot (***) was taken after a transfer and therefore RTS is
    deasserted again, which means current status and sport->old_status
    are identical. In case (**) triggered when RTS got asserted, and
    made port->hw_stopped set, the port->hw_stopped will remain set
    because no change on RTS line is recognized by this driver and
    uart_handle_cts_change() is not called from here to unblock the
    port->hw_stopped.

Update sport->old_status in __imx_uart_rtsint() accordingly to make
imx_uart_mctrl_check() detect such RTS change. Note that TIOCM_CAR
and TIOCM_RI bits in sport->old_status do not suffer from this problem.

Fixes: ceca629e ("[ARM] 2971/1: i.MX uart handle rts irq")
Cc: stable <stable@kernel.org>
Reviewed-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241002184133.19427-1-marex@denx.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
 <TASK>
 gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
 __pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm]
 __pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389
 update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500
 __pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846
 __rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161
 gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
 _raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107
 __pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm]
 ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195
 ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79
 __pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338
 __pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805
 tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818

Allocated by task 65:
 gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm]
 gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm]
 gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm]
 gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm]
 tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391
 tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39
 flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445
 process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229
 worker_thread+0x3dc/0x950 kernel/workqueue.c:3391
 kthread+0x2a3/0x370 kernel/kthread.c:389
 ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257

Freed by task 3367:
 kfree+0x126/0x420 mm/slub.c:4580
 gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
 gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
 tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818

[Analysis]
gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux
can be freed by multi threads through ioctl,which leads
to the occurrence of uaf. Protect it by gsm tx lock.
Signed-off-by: Longlong Xia <xialonglong@kylinos.cn>
Cc: stable <stable@kernel.org>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240926130213.531959-1-xialonglong@kylinos.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

font.data may not initialize all memory spaces depending on the implementation
of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it
is safest to modify it to initialize the allocated memory space to 0, and it
generally does not affect the overall performance of the system.

Cc: stable@vger.kernel.org
Reported-by: syzbot+955da2d57931604ee691@syzkaller.appspotmail.com
Fixes: 05e2600c ("VT: Bump font size limitation to 64x128 pixels")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20241010174619.59662-1-aha310510@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Move non-boot built-in DTBs to the .rodata section

 - Fix Kconfig bugs

 - Fix maint scripts in the linux-image Debian package

 - Import some list macros to scripts/include/

* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: deb-pkg: Remove blank first line from maint scripts
  kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
  scripts: import more list macros
  kconfig: qconf: fix buffer overflow in debug links
  kconfig: qconf: move conf_read() before drawing tree pain
  kconfig: clear expr::val_is_valid when allocated
  kconfig: fix infinite loop in sym_calc_choice()
  kbuild: move non-boot built-in DTBs to .rodata section

Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
   laptops

 - Intel Diamond Rapids hw-id additions

 - Documentation and MAINTAINERS fixes

 - Some other small fixes

* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
  platform/x86: wmi: Update WMI driver API documentation
  platform/x86: dell-ddv: Fix typo in documentation
  platform/x86: dell-sysman: add support for alienware products
  platform/x86/intel: power-domains: Add Diamond Rapids support
  platform/x86: ISST: Add Diamond Rapids to support list
  platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
  platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
  MAINTAINERS: Update Intel In Field Scan(IFS) entry
  platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug

Pull kvm fixes from Paolo Bonzini:
 "ARM64:

   - Fix pKVM error path on init, making sure we do not change critical
     system registers as we're about to fail

   - Make sure that the host's vector length is at capped by a value
     common to all CPUs

   - Fix kvm_has_feat*() handling of "negative" features, as the current
     code is pretty broken

   - Promote Joey to the status of official reviewer, while James steps
     down -- hopefully only temporarly

  x86:

   - Fix compilation with KVM_INTEL=KVM_AMD=n

   - Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use

  Selftests:

   - Fix compilation on non-x86 architectures"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/reboot: emergency callbacks are now registered by common KVM code
  KVM: x86: leave kvm.ko out of the build if no vendor module is requested
  KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
  KVM: arm64: Fix kvm_has_feat*() handling of negative features
  KVM: selftests: Fix build on architectures other than x86_64
  KVM: arm64: Another reviewer reshuffle
  KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
  KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path

Pull powerpc fix from Michael Ellerman:

 - Allow r30 to be used in vDSO code generation of getrandom

Thanks to Jason A. Donenfeld

* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vdso: allow r30 in vDSO code generation of getrandom

The blank line causes execve() to fail:

  # strace ./postinst
  execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
  strace: exec: Exec format error
  +++ exited with 1 +++

However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.

Fixes: b611daae ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If we follow "make help" to "make dt_binding_schema", we will see
below error:

$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'.  Stop.
make: *** [Makefile:224: __sub-make] Error 2

It should be a typo. So this will fix it.

Fixes: 604a57ba ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Import list_is_first, list_is_last, list_replace, and list_replace_init.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().

When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.

Fixes: 5eba0141 ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com

The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.

Fixes: e04e2b76 ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.deSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix typo in word 'diagnostics' in documentation.
Signed-off-by: Anaswara T Rajan <anaswaratrajan@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005070056.16326-1-anaswaratrajan@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add Diamond Rapids (INTEL_PANTHERCOVE_X) to tpmi_cpu_ids to support
domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-3-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add Diamond Rapids (INTEL_PANTHERCOVE_X) to SST support list by adding
to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-2-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.

Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.

Fixes: e86c8186 ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com

If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.

On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.

Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.deReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Ashok is no longer with Intel and his e-mail address will start bouncing
soon.  Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
  system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
  common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
  code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
  down -- hopefully only temporarly

Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a942 ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled.  In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.

Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.

This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled.  The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.

Fixes: 590b09b1 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull bcachefs fixes from Kent Overstreet:
 "A lot of little fixes, bigger ones include:

   - bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
     changes, now fixed along with another lost wakeup

   - fragmentation LRU fixes; fsck now repairs successfully (this is the
     data structure copygc uses); along with some nice simplification.

   - Rework logged op error handling, so that if logged op replay errors
     (due to another filesystem error) we delete the logged op instead
     of going into an infinite loop)

   - Various small filesystem connectivitity repair fixes"

* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
  bcachefs: Rework logged op error handling
  bcachefs: Add warn param to subvol_get_snapshot, peek_inode
  bcachefs: Kill snapshot arg to fsck_write_inode()
  bcachefs: Check for unlinked, non-empty dirs in check_inode()
  bcachefs: Check for unlinked inodes with dirents
  bcachefs: Check for directories with no backpointers
  bcachefs: Kill alloc_v4.fragmentation_lru
  bcachefs: minor lru fsck fixes
  bcachefs: Mark more errors AUTOFIX
  bcachefs: Make sure we print error that causes fsck to bail out
  bcachefs: bkey errors are only AUTOFIX during read
  bcachefs: Create lost+found in correct snapshot
  bcachefs: Fix reattach_inode()
  bcachefs: Add missing wakeup to bch2_inode_hash_remove()
  bcachefs: Fix trans_commit disk accounting revert
  bcachefs: Fix bch2_inode_is_open() check
  bcachefs: Fix return type of dirent_points_to_inode_nowarn()
  bcachefs: Fix bad shift in bch2_read_flag_list()

Pull xen fix from Juergen Gross:
 "Fix Xen config issue introduced in the merge window"

* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Fix config option reference in XEN_PRIVCMD definition

Pull ext4 fixes from Ted Ts'o:
 "Fix some ext4 bugs and regressions relating to oneline resize and fast
  commits"

* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix off by one issue in alloc_flex_gd()
  ext4: mark fc as ineligible using an handle in ext4_xattr_set()
  ext4: use handle to mark fc as ineligible in __track_dentry_update()

Pull cxl fix from Ira Weiny:

 - Fix calculation for SBDF in error injection

* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  EINJ, CXL: Fix CXL device SBDF calculation

Pull i2c fix from Wolfram Sang:

 - Fix potential deadlock during runtime suspend and resume (stm32f7)

* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume

Pull spi fixes from Mark Brown:
 "A small set of driver specific fixes that came in since the merge
  window, about half of which is fixes for correctness in the use of the
  runtime PM APIs done as part of a broader cleanup"

* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: s3c64xx: fix timeout counters in flush_fifo
  spi: atmel-quadspi: Fix wrong register value written to MR
  spi: spi-cadence: Fix missing spi_controller_is_target() check
  spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
  spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled

Pull hardening fixes from Kees Cook:

 - gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
   Chancellor)

 - MAINTAINERS: Add security/Kconfig.hardening to hardening section
   (Nathan Chancellor)

 - MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list

* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  MAINTAINERS: Add security/Kconfig.hardening to hardening section
  hardening: Adjust dependencies in selection of MODVERSIONS
  MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list

Pull lsm revert from Paul Moore:
 "Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
  discussing this week. With near unanimous agreement that the original
  TOMOYO patches were not the right way to solve the distro problem
  Tetsuo is trying the solve, reverting is our best option at this time"

* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support

Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[   19.411889] ==================================================================
[   19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[   19.417368]
[   19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G            E      6.9.0 #10
[   19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[   19.422687] Call Trace:
[   19.424091]  <TASK>
[   19.425448]  dump_stack_lvl+0x5d/0x80
[   19.426963]  ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.428694]  print_report+0x19d/0x52e
[   19.430206]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[   19.431837]  ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.433539]  kasan_report+0xf0/0x170
[   19.435019]  ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.436709]  _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.438379]  ? __pfx_sched_clock_cpu+0x10/0x10
[   19.439910]  isst_if_cpu_online+0x406/0x58f [isst_if_common]
[   19.441573]  ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[   19.443263]  ? ttwu_queue_wakelist+0x2c1/0x360
[   19.444797]  cpuhp_invoke_callback+0x221/0xec0
[   19.446337]  cpuhp_thread_fun+0x21b/0x610
[   19.447814]  ? __pfx_cpuhp_thread_fun+0x10/0x10
[   19.449354]  smpboot_thread_fn+0x2e7/0x6e0
[   19.450859]  ? __pfx_smpboot_thread_fn+0x10/0x10
[   19.452405]  kthread+0x29c/0x350
[   19.453817]  ? __pfx_kthread+0x10/0x10
[   19.455253]  ret_from_fork+0x31/0x70
[   19.456685]  ? __pfx_kthread+0x10/0x10
[   19.458114]  ret_from_fork_asm+0x1a/0x30
[   19.459573]  </TASK>
[   19.460853]
[   19.462055] Allocated by task 1198:
[   19.463410]  kasan_save_stack+0x30/0x50
[   19.464788]  kasan_save_track+0x14/0x30
[   19.466139]  __kasan_kmalloc+0xaa/0xb0
[   19.467465]  __kmalloc+0x1cd/0x470
[   19.468748]  isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[   19.470233]  isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[   19.471670]  do_one_initcall+0xa4/0x380
[   19.472903]  do_init_module+0x238/0x760
[   19.474105]  load_module+0x5239/0x6f00
[   19.475285]  init_module_from_file+0xd1/0x130
[   19.476506]  idempotent_init_module+0x23b/0x650
[   19.477725]  __x64_sys_finit_module+0xbe/0x130
[   19.476506]  idempotent_init_module+0x23b/0x650
[   19.477725]  __x64_sys_finit_module+0xbe/0x130
[   19.478920]  do_syscall_64+0x82/0x160
[   19.480036]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[   19.481292]
[   19.482205] The buggy address belongs to the object at ffff888829e65000
 which belongs to the cache kmalloc-512 of size 512
[   19.484818] The buggy address is located 0 bytes to the right of
 allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[   19.487447]
[   19.488328] The buggy address belongs to the physical page:
[   19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[   19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[   19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[   19.493914] page_type: 0xffffffff()
[   19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[   19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[   19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[   19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[   19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[   19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[   19.503784] page dumped because: kasan: bad access detected
[   19.505058]
[   19.505970] Memory state around the buggy address:
[   19.507172]  ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   19.508599]  ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.510014]                    ^
[   19.510016]  ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.510018]  ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.515367] ==================================================================

The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().

Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().

Fixes: 9a1aac8a ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering")
Cc: stable@vger.kernel.org
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zach Wade <zachwade.k@gmail.com>
Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes to build warnings, install scripts, run-time error path, and git
  status cleanups to tests:

   - devices/probe: fix for Python3 regex string syntax warnings

   - clone3: removing unused macro from clone3_cap_checkpoint_restore()

   - vDSO: fix to align getrandom states to cache line

   - core and exec: add missing executables to .gitignore files

   - rtc: change to skip test if /dev/rtc0 can't be accessed

   - timers/posix: fix warn_unused_result result in __fatal_error()

   - breakpoints: fix to detect suspend successful condition correctly

   - hid: fix to install required dependencies to run the test"

* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: breakpoints: use remaining time to check if suspend succeed
  kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
  selftest: hid: add missing run-hid-tools-tests.sh
  selftests: vDSO: align getrandom states to cache line
  selftests: exec: update gitignore for load_address
  selftests: core: add unshare_test to gitignore
  clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
  selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
  selftest: rtc: Check if could access /dev/rtc0 before testing

Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

These shouldn't always be fatal errors - logged op resume, in
particular, and we want it as a parameter there.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.

This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>