- 02 Apr, 2015 35 commits
-
-
Ido Shamay authored
Currently any change of netdev features results in a call to mlx4_en_update_loopback_state(). Those calls are unnecessary, and should be called only upon loopback feature change. Also moved some of the logic into mlx4_en_update_loopback_state(). Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Shamay authored
Enable RSS support for fragmented IP packets, when device supports it. Until now, fragmented IP packets were directed only to the default_qpn. Since IP fragments (datagram) have no upper protocols (L3 IP packets), hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW makes sure that this holds for the 1st fragment too, so all fragments go to the same QP. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: -
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "This time we have addition of caps for jz4740 which fixes intentional warning at boot. Then we have memory leak issues in drivers using virt-dma by Peter on few drive" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: moxart-dma: Fix memory leak when stopping a running transfer dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer dmaengine: omap-dma: Fix memory leak when terminating running transfer dmaengine: edma: fix memory leak when terminating running transfers dmaengine: jz4740: Define capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from Johannes Berg. 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry Finger. 3) Need to use for_each_netdev_safe() in rtnl_group_changelink() otherwise we can crash, from WANG Cong. 4) mlx4 driver does register_netdev() too early in the probe sequence, from Ido Shamay. 5) Don't allow router discovery hop limit to decrease the interface's hop limit, from D.S. Ljungmark. 6) tx_packets and tx_bytes improperly accounted for certain classes of USB network devices, fix from Ben Hutchings. 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr tables in the error path, they must instead use ip{6}mr_free_table(). Fix from WANG Cong. 8) cxgb4 doesn't properly quiesce all RX activity before unregistering the netdevice. Fix from Hariprasad Shenai. 9) Fix hash corruptions in ipvlan driver, from Jiri Benc. 10) nla_memcpy(), like a real memcpy, should fully initialize the destination buffer, even if the source attribute is smaller. Fix from Jiri Benc. 11) Fix wrong error code returned from iucv_sock_sendmsg(). We should use whatever sock_alloc_send_skb() put into 'err'. From Eugene Crosser. 12) Fix slab object leak on module unload in TIPC, from Ying Xue. 13) Need a READ_ONCE() when reading the cached RX socket route in tcp_v{4,6}_early_demux(). From Michal Kubecek. 14) Still too many problems with TPC support in the ath9k driver, so disable it for now. From Felix Fietkau. 15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from Larry Finger. 16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) cxgb4: Fix to dump devlog, even if FW is crashed cxgb4: Firmware macro changes for fw verison 1.13.32.0 bnx2x: Fix kdump when iommu=on bnx2x: Fix kdump on 4-port device mac80211: fix RX A-MPDU session reorder timer deletion MAINTAINERS: Update Intel Wired Ethernet Driver info tipc: fix a slab object leak net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet af_iucv: fix AF_IUCV sendmsg() errno openvswitch: Return vport module ref before destruction netlink: pad nla_memcpy dest buffer with zeroes bonding: Bonding Overriding Configuration logic restored. ipvlan: fix check for IP addresses in control path ipvlan: do not use rcu operations for address list ipvlan: protect against concurrent link removal ipvlan: fix addr hash list corruption net: fec: setup right value for mdio hold time net: tcp6: fix double call of tcp_v6_fill_cb() cxgb4vf: Fix sparse warnings netns: don't clear nsid too early on removal ... -
David S. Miller authored
Nicolas Dichtel says: ==================== Remove iflink field from the net_device structure The first goal of this series was to advertise the veth peer via the IFLA_LINK attribute, but iflink was not ready for network namespaces. The iflink of an interface should be set to its ifindex for a physical interface and to another value (0 if not relevant) for a virtual interface. This was not the case for some interfaces, like vxlan, bond, or bridge for example. There is also a risk, if the targeted interface moves to another netns, that the ifindex changes without updating corresponding iflink fields (eg. vlan). Moving the management of this property into virtual interface drivers allows to better handle this last case because most of virtual interface drivers have a pointer to the link netdevice. Anyway, dev->iflink value was always a copy of some internal data of the virtual interface driver, thus let's use these internal data directly. So, this series removes the iflink field and let the drivers manage it. Only the last patch was present in the v1, but I fully rework it. ==================== Signed-off-by: -
Nicolas Dichtel authored
Now that the peer netns is advertised in rtnl messages, we can set this property so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get the full veth configuration. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
Virtual interfaces are supposed to set an iflink value != of their ifindex. It was not the case for some of them, like vxlan, bond or bridge. Let's set iflink to 0 when dev->rtnl_link_ops is set. Signed-off-by:
-
Nicolas Dichtel authored
Now that all users of iflink have the ndo_get_iflink handler available, it's possible to remove this field. By default, dev_get_iflink() returns the ifindex of the interface. Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Roland Dreier <roland@kernel.org> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Nicolas Dichtel authored
The goal of this patch is to prepare the removal of the iflink field. It introduces a new ndo function, which will be implemented by virtual interfaces. There is no functional change into this patch. All readers of iflink field now call dev_get_iflink(). Signed-off-by:
-
tadeusz.struk@intel.com authored
After the TX sgl is expanded we need to explicitly mark end of data at the last buffer that contains data. Changes in v2 - use type 'bool' and true/false for 'mark'. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== DSA Mavell drivers refactoring and cleanup v1->v2: * Add missing signed-of-by: For patches authored by Guenter Roeck. * Add Reviewed by from Guenter Roack to patch #5. This is a collection of patches again net-next from today containing refactoring and consolidate of code, cleanups and using #define's to replace register numbers. Patch #1 Swaps the 6131 driver to use the consolidated setup code. Patch #2 Moves the Switch IDs used during probe into a central location. We need these later so that we can differentiate the different features the devices have. Patch #3 Makes the 6131 driver set the number of ports in the private state structure. It then uses this, rather than hard coded maximum number of ports. Patch #4 Similar to Patch #3, but for the 6123_61_65 driver. Patch #5 Similar to Patch #3, and #4, but for all the remaining drivers. This greatly increases the similarity of the code between drivers, allow further patches to consolidate the duplicated code. Patch #6 Consolidate the switch reset code, which has two minor variants. Removes around 35 lines per driver. Patch #7 Moves phy page access functions out of the 6352 driver into the shared code. Currently only the 6352 driver uses this, but it is likely other devices will come along wanting this functionality. Patch #8 Consolidates the code used to access phy registers. Removes around 40 lines of code per driver. Patch #9 Fixes missing mutex locking in the EEE code, and refactors the code a bit to make it more understandable with respect to locks. Patch #10 Consolidates reading statistics. This is very similar code for all devices, but the number of available statistics differ, which can be determined from the product ID. Removes around 65 lines per driver. Patch #11 Add #defines for registers, and bits within the registers. For the moment, this is limited to the shared code. The individual drivers will be converted once the remaining duplicated code is consolidated Patch #12 Fix broken statistic counters on the 6172. The 6352 family requires the port number is poked into a different set of bits in the register compared to other devices. Many thanks to Guenter Roeck for repeatedly reviewing the patches and testing them on his hardware. ==================== Signed-off-by: -
Andrew Lunn authored
The statistic counters for the mv88e6172 never worked. This device is a member of the 6352 family of chips, which has a slightly different layout of the register used for capturing statistics. Add support for detecting this family and poking the port in the right place in the register. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Andrew Lunn authored
Rather than refer to registers by number, define mnemonics. Also define mnemonics for the commonly used bits within the registers. Signed-off-by:
-
Andrew Lunn authored
Reading the statistics from the hardware is the same for all chips. What differs is the number of available statistics. Have just one copy of the code in the shared mv88e6xxx. Signed-off-by:
-
Andrew Lunn authored
The phy_mutex should be held while reading and writing to the phy. Signed-off-by:
-
Andrew Lunn authored
Move the common code for reading and writing phy registers into the shared mv88e6xxx. Signed-off-by:
-
Andrew Lunn authored
These functions could in future be used by other drivers. Move them into the shared area. Signed-off-by:
-
Andrew Lunn authored
Marvell switches are all reset in nearly the same way. The only difference is if the PPU should be enabled or not. Move this code into the shared mv88x6xxx.c. Signed-off-by:
-
Andrew Lunn authored
As a step towards consolidating code, consistently set the number of ports in the private state structure, and make use of it in loops. Signed-off-by:
-
Guenter Roeck authored
Determine and use number of switch ports from chip ID instead of always using the maximum, and return error when an attempt is made to access a non-existing port. Signed-off-by:
-
Guenter Roeck authored
Determine and use number of switch ports from chip ID instead of always using the maximum, and return error when an attempt is made to access a non-existing port. Signed-off-by:
-
Guenter Roeck authored
This will let us use the switch product IDs in the common source code. Signed-off-by:
-
Guenter Roeck authored
Common initialization functions will be needed to enable HW bridging support. Signed-off-by:
-
Simon Horman authored
Correct spelling of locally. Also remove extra space before tab character in struct fq_flow. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Simon Horman authored
Fix some spelling / typos: * droppped -> dropped * asddress -> address * compatbility -> compatibility Signed-off-by:
-
stephen hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
- 01 Apr, 2015 5 commits
-
-
Joe Perches authored
Move about half a KB of data to text. Miscellanea: o Move strings out of the .h file into the .c file in case the .h file is ever #included twice Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Tadeusz Struk authored
No need to use kzalloc to allocate sgls as the structure is initialized anyway. Signed-off-by:
-
Tadeusz Struk authored
Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix a memory leak, we leaked memory each time the module was loaded. ==================== Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4 FW macro changes for new FW Fix to dump device log even in the case of firmware crash. Also incorporates changes for new FW. This patch series has been created against net tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by:
-
