- 06 Jun, 2023 4 commits
-
-
Kuniyuki Iwashima authored
syzkaller found a repro that causes Hung Task [0] with ipset. The repro first creates an ipset and then tries to delete a large number of IPs from the ipset concurrently: IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187 IPSET_ATTR_CIDR : 2 The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET) held, and other threads wait for it to be released. Previously, the same issue existed in set->variant->uadt() that could run so long under ip_set_lock(set). Commit 5e29dc36 ("netfilter: ipset: Rework long task execution when adding/deleting entries") tried to fix it, but the issue still exists in the caller with another mutex. While adding/deleting many IPs, we should release the CPU periodically to prevent someone from abusing ipset to hang the system. Note we need to increment the ipset's refcnt to prevent the ipset from being destroyed while rescheduling. [0]: INFO: task syz-executor174:268 blocked for more than 143 seconds. Not tainted 6.4.0-rc1-00145-gba79e9a7 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d Call trace: __switch_to+0x308/0x714 arch/arm64/kernel/process.c:556 context_switch kernel/sched/core.c:5343 [inline] __schedule+0xd84/0x1648 kernel/sched/core.c:6669 schedule+0xf0/0x214 kernel/sched/core.c:6745 schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804 __mutex_lock_common kernel/locking/mutex.c:679 [inline] __mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747 __mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035 mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286 nfnl_lock net/netfilter/nfnetlink.c:98 [inline] nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295 netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546 nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365 netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x4b8/0x810 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Reported-by:
syzkaller <syzkaller@googlegroups.com> Fixes: a7b4f989 ("netfilter: ipset: IP set core support") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Tijs Van Buggenhout authored
An nf_conntrack_helper from nf_conn_help may become NULL after DNAT. Observed when TCP port 1720 (Q931_PORT), associated with h323 conntrack helper, is DNAT'ed to another destination port (e.g. 1730), while nfqueue is being used for final acceptance (e.g. snort). This happenned after transition from kernel 4.14 to 5.10.161. Workarounds: * keep the same port (1720) in DNAT * disable nfqueue * disable/unload h323 NAT helper $ linux-5.10/scripts/decode_stacktrace.sh vmlinux < /tmp/kernel.log BUG: kernel NULL pointer dereference, address: 0000000000000084 [..] RIP: 0010:nf_conntrack_update (net/netfilter/nf_conntrack_core.c:2080 net/netfilter/nf_conntrack_core.c:2134) nf_conntrack [..] nfqnl_reinject (net/netfilter/nfnetlink_queue.c:237) nfnetlink_queue nfqnl_recv_verdict (net/netfilter/nfnetlink_queue.c:1230) nfnetlink_queue nfnetlink_rcv_msg (net/netfilter/nfnetlink.c:241) nfnetlink [..] Fixes: ee04805f ("netfilter: conntrack: make conntrack userspace helpers work again") Signed-off-by:
Tijs Van Buggenhout <tijs.van.buggenhout@axsguard.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Jeremy Sowden authored
At the end of `nft_bitwise_reduce`, there is a loop which is intended to update the bitwise expression associated with each tracked destination register. However, currently, it just updates the first register repeatedly. Fix it. Fixes: 34cc9e52 ("netfilter: nf_tables: cancel tracking for clobbered destination registers") Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Gavrilov Ilia authored
The nla_nest_start_noflag() function may fail and return NULL; the return value needs to be checked. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d54725cd ("netfilter: nf_tables: support for multiple devices per netdev hook") Signed-off-by:
Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru> Signed-off-by:
-
- 19 May, 2023 16 commits
-
-
Shenwei Wang authored
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of descriptor and buffer updates: 1. A dma_wmb() is added after updating the last BD to make sure the updates to rest of the descriptor are visible before transferring ownership to FEC. 2. A dma_wmb() is also added after updating the bdp to ensure these updates are visible before updating txq->bd.cur. 3. Start the xmit of the frame immediately right after configuring the tx descriptor. Fixes: 6d6b39f1 ("net: fec: add initial XDP support") Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by:
Wei Fang <wei.fang@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
I would like to be copied on new patches submitted on this driver. I am relatively familiar with the code, having practically maintained it for a while. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Sunil Goutham authored
HW adds segment size to the payload length in the IPv6 header. Fix payload length to just TCP header length instead of 'TCP header size + IPv6 header size'. Fixes: 86d74760 ("octeontx2-pf: TCP segmentation offload support") Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by:
-
Alejandro Lucero authored
Avoid early devlink info return if errors arise with MCDI commands executed for getting the required info from the device. The rationale is some commands can fail but later ones could still give useful data. Moreover, some nvram partitions could not be present which needs to be handled as a non error. The specific errors are reported through system messages and if any error appears, it will be reported generically through extack. Fixes 14743ddd ("sfc: add devlink info support for ef100") Signed-off-by:
Alejandro Lucero <alejandro.lucero-palau@amd.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
Wen Gu authored
We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port> BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ? __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ? __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr: create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration. Fixes: e49300a6 ("net/smc: add listen processing for SMC-Rv2") Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Po-Hsu Lin authored
In the end of the test, there will be an error message induced by the `ip netns del ns1` command in cleanup() Tests passed: 201 Tests failed: 0 Cannot remove namespace file "/run/netns/ns1": No such file or directory This can even be reproduced with just `./fib_tests.sh -h` as we're calling cleanup() on exit. Redirect the error message to /dev/null to mute it. V2: Update commit message and fixes tag. V3: resubmit due to missing netdev ML in V2 Fixes: b60417a9 ("selftest: fib_tests: Always cleanup before exit") Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
Jakub Kicinski authored
NAPI gets called with budget of 0 from netpoll, which has interrupts disabled. We should try to free some space on Tx rings and nothing else. Specifically do not try to handle XDP TX or try to refill Rx buffers - we can't use the page pool from IRQ context. Don't check if IRQs moved, either, that makes no sense in netpoll. Netpoll calls _all_ the rings from whatever CPU it happens to be invoked on. In general do as little as possible, the work quickly adds up when there's tens of rings to poll. The immediate stack trace I was seeing is: __do_softirq+0xd1/0x2c0 __local_bh_enable_ip+0xc7/0x120 </IRQ> <TASK> page_pool_put_defragged_page+0x267/0x320 mlx5e_free_xdpsq_desc+0x99/0xd0 mlx5e_poll_xdpsq_cq+0x138/0x3b0 mlx5e_napi_poll+0xc3/0x8b0 netpoll_poll_dev+0xce/0x150 AFAIU page pool takes a BH lock, releases it and since BH is now enabled tries to run softirqs. Reviewed-by:Tariq Toukan <tariqt@nvidia.com> Fixes: 60bbf7ee ("mlx5: use page_pool for xdp_return_frame call") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== tls: rx: strp: fix inline crypto offload The local strparser version I added to TLS does not preserve decryption status, which breaks inline crypto (NIC offload). ==================== Signed-off-by: -
Jakub Kicinski authored
When receive buffer is small, or the TCP rx queue looks too complicated to bother using it directly - we allocate a new skb and copy data into it. We already use sk->sk_allocation... but nothing actually sets it to GFP_ATOMIC on the ->sk_data_ready() path. Users of HW offload are far more likely to experience problems due to scheduling while atomic. "Copy mode" is very rarely triggered with SW crypto. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
Shai Amiram <samiram@nvidia.com> Signed-off-by:
-
Jakub Kicinski authored
When receive buffer is small we try to copy out the data from TCP into a skb maintained by TLS to prevent connection from stalling. Unfortunately if a single record is made up of a mix of decrypted and non-decrypted skbs combining them into a single skb leads to loss of decryption status, resulting in decryption errors or data corruption. Similarly when trying to use TCP receive queue directly we need to make sure that all the skbs within the record have the same status. If we don't the mixed status will be detected correctly but we'll CoW the anchor, again collapsing it into a single paged skb without decrypted status preserved. So the "fixup" code will not know which parts of skb to re-encrypt. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
-
Jakub Kicinski authored
We'll need to copy input skbs individually in the next patch. Factor that code out (without assuming we're copying a full record). Tested-by:
-
Jakub Kicinski authored
We call tls_rx_msg_size(skb) before doing skb->len += chunk. So the tls_rx_msg_size() code will see old skb->len, most likely leading to an over-read. Worst case we will over read an entire record, next iteration will try to trim the skb but may end up turning frag len negative or discarding the subsequent record (since we already told TCP we've read it during previous read but now we'll trim it out of the skb). Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
-
Jakub Kicinski authored
If a record is partially decrypted we'll have to CoW it, anyway, so go into copy mode and allocate a writable skb right away. This will make subsequent fix simpler because we won't have to teach tls_strp_msg_make_copy() how to copy skbs while preserving decrypt status. Tested-by:
-
Jakub Kicinski authored
alloc_skb_with_frags() fills in page frag sizes but does not set skb->len and skb->data_len. Set those correctly otherwise device offload will most likely generate an empty skb and hit the BUG() at the end of __skb_nsg(). Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
-
Jakub Kicinski authored
skb->len covers the entire skb, including the frag_list. In fact we're guaranteed that rxm->full_len <= skb->len, so since the change under Fixes we were not checking decrypt status of any skb but the first. Note that the skb_pagelen() added here may feel a bit costly, but it's removed by subsequent fixes, anyway. Reported-by:
-
Tudor Ambarus authored
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d1 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/Signed-off-by:Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by:
-
- 18 May, 2023 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can, xfrm, bluetooth and netfilter. Current release - regressions: - ipv6: fix RCU splat in ipv6_route_seq_show() - wifi: iwlwifi: disable RFI feature Previous releases - regressions: - tcp: fix possible sk_priority leak in tcp_v4_send_reset() - tipc: do not update mtu if msg_max is too small in mtu negotiation - netfilter: fix null deref on element insertion - devlink: change per-devlink netdev notifier to static one - phylink: fix ksettings_set() ethtool call - wifi: mac80211: fortify the spinlock against deadlock by interrupt - wifi: brcmfmac: check for probe() id argument being NULL - eth: ice: - fix undersized tx_flags variable - fix ice VF reset during iavf initialization - eth: hns3: fix sending pfc frames after reset issue Previous releases - always broken: - xfrm: release all offloaded policy memory - nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment() - vsock: avoid to close connected socket after the timeout - dsa: rzn1-a5psw: enable management frames for CPU port - eth: virtio_net: fix error unwinding of XDP initialization - eth: tun: fix memory leak for detached NAPI queue. Misc: - MAINTAINERS: sctp: move Neil to CREDITS" * tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) MAINTAINERS: skip CCing netdev for Bluetooth patches mdio_bus: unhide mdio_bus_init prototype bridge: always declare tunnel functions atm: hide unused procfs functions net: isa: include net/Space.h Revert "ARM: dts: stm32: add CAN support on stm32f746" netfilter: nft_set_rbtree: fix null deref on element insertion netfilter: nf_tables: fix nft_trans type confusion netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT net: wwan: t7xx: Ensure init is completed before system sleep net: selftests: Fix optstring net: pcs: xpcs: fix C73 AN not getting enabled net: wwan: iosm: fix NULL pointer dereference when removing device vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() mailmap: add entries for Nikolay Aleksandrov igb: fix bit_shift to be in [1..8] range net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset cassini: Fix a memory leak in the error handling path of cas_init_one() tun: Fix memory leak for detached NAPI queue. can: kvaser_pciefd: Disable interrupts in probe error path ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Several fixes for the dvb core and drivers: - fix UAF and null pointer de-reference in DVB core - fix kernel runtime warning for blocking operation in wait_event*() in dvb core - fix write size bug in DVB conditional access core - fix dvb demux continuity counter debug check logic - randconfig build fixes in pvrusb2 and mn88443x - fix memory leak in ttusb-dec - fix netup_unidvb probe-time error check logic - improve error handling in dw2102 if it can't retrieve DVB MAC address" * tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221 media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*() media: dvb-core: Fix use-after-free due to race at dvb_register_device() media: dvb-core: Fix use-after-free due on race condition at dvb_net media: dvb-core: Fix use-after-free on race condition at dvb_frontend media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb() media: dvb_ca_en50221: fix a size write bug media: netup_unidvb: fix irq init by register it at the end of probe media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer() media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer() media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer() media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer() media: netup_unidvb: fix use-after-free at del_timer() media: dvb_demux: fix a bug for the continuity counter media: pvrusb2: fix DVB_CORE dependency -
Paolo Abeni authored
Merge tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-05-18 this is a pull request of 7 patches for net/master. The first 6 patches are by Jimmy Assarsson and fix several bugs in the kvaser_pciefd driver. The latest patch is from me and reverts a change in stm32f746.dtsi that causes build errors due to a missing dependent patch. * tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: Revert "ARM: dts: stm32: add CAN support on stm32f746" can: kvaser_pciefd: Disable interrupts in probe error path can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt can: kvaser_pciefd: Empty SRB buffer in probe can: kvaser_pciefd: Call request_irq() before enabling interrupts can: kvaser_pciefd: Clear listen-only bit if not explicitly requested can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop() ==================== Link: https://lore.kernel.org/r/20230518073241.1110453-1-mkl@pengutronix.deSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Florian Westphal says: ==================== Netfilter fixes for net 1. Silence warning about unused variable when CONFIG_NF_NAT=n, from Tom Rix. 2. nftables: Fix possible out-of-bounds access, from myself. 3. nftables: fix null deref+UAF during element insertion into rbtree, also from myself. * tag 'nf-23-05-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_rbtree: fix null deref on element insertion netfilter: nf_tables: fix nft_trans type confusion netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT ==================== Link: https://lore.kernel.org/r/20230517123756.7353-1-fw@strlen.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.4 A lot of fixes this time, for both the stack and the drivers. The brcmfmac resume fix has been reported by several people so I would say it's the most important here. The iwlwifi RFI workaround is also something which was reported as a regression recently. * tag 'wireless-2023-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits) wifi: b43: fix incorrect __packed annotation wifi: rtw88: sdio: Always use two consecutive bytes for word operations mac80211_hwsim: fix memory leak in hwsim_new_radio_nl wifi: iwlwifi: mvm: Add locking to the rate read flow wifi: iwlwifi: Don't use valid_links to iterate sta links wifi: iwlwifi: mvm: don't trust firmware n_channels wifi: iwlwifi: mvm: fix OEM's name in the tas approved list wifi: iwlwifi: fix OEM's name in the ppag approved list wifi: iwlwifi: mvm: fix initialization of a return value wifi: iwlwifi: mvm: fix access to fw_id_to_mac_id wifi: iwlwifi: fw: fix DBGI dump wifi: iwlwifi: mvm: fix number of concurrent link checks wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock wifi: iwlwifi: mvm: don't double-init spinlock wifi: iwlwifi: mvm: always free dup_data wifi: mac80211: recalc chanctx mindef before assigning wifi: mac80211: consider reserved chanctx for mindef wifi: mac80211: simplify chanctx allocation wifi: mac80211: Abort running color change when stopping the AP wifi: mac80211: fix min center freq offset tracing ... ==================== Link: https://lore.kernel.org/r/20230517151914.B0AF6C433EF@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
As requested by Marcel skip netdev for Bluetooth patches. Bluetooth has its own mailing list and overloading netdev leads to fewer people reading it. Link: https://lore.kernel.org/netdev/639C8EA4-1F6E-42BE-8F04-E4A753A6EFFC@holtmann.org/Reviewed-by:
-
Arnd Bergmann authored
mdio_bus_init() is either used as a local module_init() entry, or it gets called in phy_device.c. In the former case, there is no declaration, which causes a warning: drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes] Remove the #ifdef around the declaration to avoid the warning.. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still defined but have no prototype or caller. This causes a W=1 warning for the missing prototypes: net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes] net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes] The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING, and I coulnd't easily figure out the right set of #ifdefs, so just move the declarations out of the #ifdef to avoid the warning, at a small cost in code size over a more elaborate fix. Fixes: 188c67dd ("net: bridge: vlan options: add support for tunnel id dumping") Fixes: 569da082 ("net: bridge: vlan options: add support for tunnel mapping set/del") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
When CONFIG_PROC_FS is disabled, the function declarations for some procfs functions are hidden, but the definitions are still build, as shown by this compiler warning: net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes] net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes] net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes] Add another #ifdef to leave these out of the build. Signed-off-by:
-
Arnd Bergmann authored
The legacy drivers that still get called from net/Space.c have prototypes in net/Space, but this header is not included in most of the files that define those functions: drivers/net/ethernet/cirrus/cs89x0.c:1649:28: error: no previous prototype for 'cs89x0_probe' [-Werror=missing-prototypes] drivers/net/ethernet/8390/ne.c:947:28: error: no previous prototype for 'ne_probe' [-Werror=missing-prototypes] drivers/net/ethernet/8390/smc-ultra.c:167:28: error: no previous prototype for 'ultra_probe' [-Werror=missing-prototypes] drivers/net/ethernet/amd/lance.c:438:28: error: no previous prototype for 'lance_probe' [-Werror=missing-prototypes] drivers/net/ethernet/3com/3c515.c:422:20: error: no previous prototype for 'tc515_probe' [-Werror=missing-prototypes] Add the inclusion to avoids the warnings. Signed-off-by:
-
- 17 May, 2023 10 commits
-
-
Marc Kleine-Budde authored
This reverts commit 0920ccdf. The commit 0920ccdf ("ARM: dts: stm32: add CAN support on stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add binding definition for CAN3" [1], which is not in net/main, yet. This results in a parsing error of "stm32f746.dtsi". So revert this commit. [1] https://lore.kernel.org/all/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305172108.x5acbaQG-lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202305172130.eGGEUhpi-lkp@intel.com Fixes: 0920ccdf ("ARM: dts: stm32: add CAN support on stm32f746") Suggested-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20230517181950.1106697-1-mkl@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - sgx test fix for false negatives - ftrace output is hard to parses and it masks inappropriate skips etc. This fix addresses the problems by integrating with kselftest runner * tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Improve integration with kselftest runner selftests/sgx: Add "test_encl.elf" to TEST_FILES
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - A collection of minor bug fixes * tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Remove open coding of string copy SUNRPC: Fix trace_svc_register() call site SUNRPC: always free ctxt when freeing deferred request SUNRPC: double free xprt_ctxt while still in use SUNRPC: Fix error handling in svc_setup_socket() SUNRPC: Fix encoding of accepted but unsuccessful RPC replies lockd: define nlm_port_min,max with CONFIG_SYSCTL nfsd: define exports_proc_ops with CONFIG_PROC_FS SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Three bug fixes for recently discovered issues" * tag 'tpmdd-v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm/tpm_tis: Disable interrupts for more Lenovo devices tpm: Prevent hwrng from activating during resume tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
-
Arnd Bergmann authored
This function is only used when CONFIG_TRACE_BRANCH_PROFILING is set and DISABLE_BRANCH_PROFILING is not set, and the declaration is hidden behind this combination of tests. But that causes a warning when building with CONFIG_TRACING_BRANCHES, since that sets DISABLE_BRANCH_PROFILING for the tracing code, and the declaration is thus hidden: kernel/trace/trace_branch.c:205:6: error: no previous prototype for 'ftrace_likely_update' [-Werror=missing-prototypes] Move the declaration out of the #ifdef to avoid the warning. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Florian Westphal authored
There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem(): general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] nft_add_set_elem+0x14b0/0x2990 nf_tables_newsetelem+0x528/0xb30 Furthermore, there is a possible use-after-free while iterating, 'node' can be free'd so we need to cache the next value to use. Fixes: c9e6978e ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by:
-
Florian Westphal authored
nft_trans_FOO objects all share a common nft_trans base structure, but trailing fields depend on the real object size. Access is only safe after trans->msg_type check. Check for rule type first. Found by code inspection. Fixes: 1a94e38d ("netfilter: nf_tables: add NFTA_RULE_ID attribute") Signed-off-by:
-
Tom Rix authored
gcc with W=1 and ! CONFIG_NF_NAT net/netfilter/nf_conntrack_netlink.c:3463:32: error: ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=] 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = { | ^~~~~~~~~~~~~~~~~~ net/netfilter/nf_conntrack_netlink.c:2979:33: error: ‘any_addr’ defined but not used [-Werror=unused-const-variable=] 2979 | static const union nf_inet_addr any_addr; | ^~~~~~~~ These variables use is controlled by CONFIG_NF_NAT, so should their definitions. Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
-
Kai-Heng Feng authored
When the system attempts to sleep while mtk_t7xx is not ready, the driver cannot put the device to sleep: [ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state [ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14 [ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14 [ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14 [ 12.764776] PM: Some devices failed to suspend, or early wake event detected Mediatek confirmed the device can take a rather long time to complete its initialization, so wait for up to 20 seconds until init is done. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Benjamin Poirier authored
The cited commit added a stray colon to the 'v' option. That makes the option work incorrectly. ex: tools/testing/selftests/net# ./fib_nexthops.sh -v (should enable verbose mode, instead it shows help text due to missing arg) Fixes: 5feba472 ("selftests: fib_nexthops: Make ping timeout configurable") Reviewed-by:
Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by:
-
