- 05 Feb, 2018 6 commits
-
-
Chris Wilson authored
During testing, we trigger a lot of resets on an unbannable context leading to massive amounts of irrelevant debug spam. Remove the ban_score accounting and message for the unbannable context so that we improve the signal:noise in the log messages for when the unexpected occurs. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-7-chris@chris-wilson.co.uk
-
Chris Wilson authored
Execlists is now enabled by default and included in the list of capabilities printed out to dmesg and beyond. We do not need to mention it again, every time we restart the engine, so kill the spam. Signed-off-by:
-
Chris Wilson authored
Dump each engine state when i915_gem_set_wedged() is called to give us some more clues as to why we had to terminate the GPU. Signed-off-by:
-
Chris Wilson authored
Provide the reason why we call intel_fbc_deactivate() so that debugging issues with FBC being delayed is clearer. Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
The headers should be on a separate line for consistency, so add the missing trailing newline in a few intel_engine_dump() callers. Reported-by:
-
Chris Wilson authored
Since unbannable contexts are special and supposed not to be causing GPU hangs in the first place, make it clear when they are implicated in said hang. In practice, most unbannable contexts are those created by igt for the express purpose of throwing untold thousands of hangs at the GPU and wish to keep doing so to finish the test. Normally they are cleaned up, but it's when they or the other unbannable kernel contexts stay stuck in an erroneous state that we need to worry and so need highlighting. Suggested-by:
-
- 02 Feb, 2018 7 commits
-
-
Chris Wilson authored
As we ourselves cancel interrupts during reset by clearing the GTIIR, it is possible for the master IIR to indicate a pending IRQ for which we have already cleared from the GTIIR. In this case, the DRM_ERROR are intended and should not be flagged as an error. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180202153448.23908-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Be paranoid and flush the GTIIR after clearing the CS interrupt to be sure it has taken before we re-enable the interrupt handler. We still see early interrupts following reset, the tasklet handling the mmio read before it has been written by the CS. This hopefully reduces the frequency to 0... References: https://bugs.freedesktop.org/show_bug.cgi?id=104262Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180202145455.29876-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Save some horizontal space. Reviewed-by:
David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We're using i915_inject_load_failure() to inject dummy faults during driver load, but since this is debug utility we shouldn't expose it in default config as it consumes both code and data. add/remove: 0/1 grow/shrink: 0/2 up/down: 0/-302 (-302) Function old new delta __i915_inject_load_failure 61 - -61 i915_gem_init 1331 1268 -63 i915_driver_load 5923 5745 -178 Total: Before=1177454, After=1177152, chg -0.03% add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-4 (-4) Data old new delta i915_load_fail_count 4 - -4 Total: Before=56762, After=56758, chg -0.01% add/remove: 4/8 grow/shrink: 0/1 up/down: 245/-591 (-346) RO Data old new delta __param_str_inject_load_failure 20 - -20 __UNIQUE_ID_inject_load_failuretype200 34 - -34 __param_inject_load_failure 40 - -40 __func__ 4998 4896 -102 __UNIQUE_ID_inject_load_failure201 150 - -150 Total: Before=119095, After=118749, chg -0.29% Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180201173248.3912-1-michal.wajdeczko@intel.comReviewed-by:
-
Jani Nikula authored
We have the max DP link rate info available in VBT since BDB version 216, included in child device config since commit c4fb60b9 ("drm/i915/bios: add DP max link rate to VBT child device struct"). Parse it and use it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Jani Nikula authored
Make the limiting rate based instead of messing with the array size. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Jani Nikula authored
This will be useful later on. Also move the functions around to not need forward declarations in subsequent patches. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
- 01 Feb, 2018 6 commits
-
-
Imre Deak authored
There is no requirement for doing the PCODE request polling atomically, so do that only for a short time switching to sleeping poll afterwards. The specification requires a 150usec timeout for the change notification, so let's use that for the atomic poll. Do the extra 2ms poll - needed as a workaround on BXT/GLK - in sleeping mode. v2: - rebase on v2 of patchset dropping the sandybridge_pcode_read/write refactoring (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326Reviewed-by:
-
Michal Wajdeczko authored
In case of GuC initialization failure we may continue with driver load, but we wrongly assume that GuC is fully functional. This leads to the BUG as we attempt to access non-existing log vma. [26386.121085] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [26386.121225] IP: guc_log_runtime_create+0x23/0xe0 [i915] [26386.121763] Call Trace: [26386.121870] guc_log_late_setup+0xfd/0x140 [i915] [26386.121969] i915_driver_load+0x7ab/0x1730 [i915] [26386.122069] i915_pci_probe+0x2d/0x90 [i915] [26386.122089] pci_device_probe+0x9c/0x120 [26386.122107] driver_probe_device+0x2a9/0x490 [26386.122126] __driver_attach+0xd9/0xe0 [26386.122143] ? driver_probe_device+0x490/0x490 [26386.122158] bus_for_each_dev+0x57/0x90 [26386.122175] bus_add_driver+0x1eb/0x260 [26386.122190] ? 0xffffffffa069a000 [26386.122206] driver_register+0x52/0xc0 [26386.122220] ? 0xffffffffa069a000 [26386.122234] do_one_initcall+0x39/0x170 [26386.122252] ? kmem_cache_alloc_trace+0x1fd/0x2e0 [26386.122273] do_init_module+0x56/0x1ec [26386.122289] load_module+0x219e/0x2550 [26386.122309] ? vfs_read+0x121/0x140 [26386.122331] ? SyS_finit_module+0xa5/0xe0 [26386.122346] SyS_finit_module+0xa5/0xe0 [26386.122371] entry_SYSCALL_64_fastpath+0x22/0x8f Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We're freeing GuC error log in uc_fini_hw() that matches corresponding uc_init_hw() but we missed the point that this log object is copied on error path and in case of failure in uc_init_hw() we will leak this object as uc_fini_hw() is never called. If we free this log object as part of the late uC cleanup, where we also release other firmware objects, we can avoid this BUG: [70841.001413] BUG drm_i915_gem_object (Tainted: G U W ): Objects remaining in drm_i915_gem_object on __kmem_cache_shutdown() [70841.001436] INFO: Slab 0x00000000c94e41af objects=21 used=1 fp=0x000000001d60c40a flags=0x8000000000008100 [70841.001466] Call Trace: [70841.001471] dump_stack+0x5e/0x8e [70841.001476] slab_err+0x99/0xb0 [70841.001483] ? __slab_alloc.isra.24.constprop.29+0x62/0x70 [70841.001491] ? __kmalloc+0x1f5/0x320 [70841.001497] __kmem_cache_shutdown+0x18b/0x400 [70841.001505] shutdown_cache+0x13/0x1c0 [70841.001511] kmem_cache_destroy+0x1c2/0x240 [70841.001517] ? __mutex_unlock_slowpath+0x38/0x270 [70841.001559] i915_gem_load_cleanup+0xbc/0x130 [i915] [70841.001595] i915_driver_cleanup_early+0x11/0x60 [i915] [70841.001630] i915_driver_load+0x708/0x1720 [i915] [70841.001638] ? trace_hardirqs_on_caller+0xe2/0x1c0 [70841.001673] i915_pci_probe+0x2d/0x90 [i915] [70841.001680] pci_device_probe+0x9c/0x120 [70841.001687] driver_probe_device+0x2a9/0x490 [70841.001694] __driver_attach+0xd9/0xe0 [70841.001700] ? driver_probe_device+0x490/0x490 [70841.001705] bus_for_each_dev+0x57/0x90 [70841.001712] bus_add_driver+0x1eb/0x260 [70841.001717] ? 0xffffffffa0685000 [70841.001723] driver_register+0x52/0xc0 [70841.001728] ? 0xffffffffa0685000 [70841.001733] do_one_initcall+0x39/0x170 [70841.001739] ? rcu_read_lock_sched_held+0x6f/0x80 [70841.001746] ? kmem_cache_alloc_trace+0x27b/0x2e0 [70841.001753] do_init_module+0x56/0x1ec [70841.001759] load_module+0x219e/0x2550 [70841.001766] ? vfs_read+0x121/0x140 [70841.001774] ? SyS_finit_module+0xa5/0xe0 [70841.001779] SyS_finit_module+0xa5/0xe0 [70841.001788] entry_SYSCALL_64_fastpath+0x22/0x8f [70841.001806] INFO: Object 0x00000000eab7ed96 @offset=6208 [70841.001850] INFO: Allocated in i915_gem_object_create.part.32+0x1f/0x260 [i915] age=38 cpu=0 pid=2708 [70841.001861] kmem_cache_alloc+0x23d/0x2d0 [70841.001897] i915_gem_object_create.part.32+0x1f/0x260 [i915] [70841.001937] intel_guc_allocate_vma+0x15/0x100 [i915] [70841.001977] intel_guc_log_create+0x34/0x1c0 [i915] [70841.002014] intel_guc_init+0x5a/0x100 [i915] [70841.002051] intel_uc_init+0x3e/0xb0 [i915] [70841.002089] i915_gem_init+0x18e/0x540 [i915] [70841.002123] i915_driver_load+0xa7a/0x1720 [i915] [70841.002159] i915_pci_probe+0x2d/0x90 [i915] [70841.002165] pci_device_probe+0x9c/0x120 [70841.002171] driver_probe_device+0x2a9/0x490 [70841.002177] __driver_attach+0xd9/0xe0 [70841.002182] bus_for_each_dev+0x57/0x90 [70841.002188] bus_add_driver+0x1eb/0x260 [70841.002193] driver_register+0x52/0xc0 [70841.002198] do_one_initcall+0x39/0x170 [70841.002462] kmem_cache_destroy drm_i915_gem_object: Slab cache still has objects [70841.002491] Call Trace: [70841.002497] dump_stack+0x5e/0x8e [70841.002503] kmem_cache_destroy+0x1e0/0x240 [70841.002509] ? __mutex_unlock_slowpath+0x38/0x270 [70841.002551] i915_gem_load_cleanup+0xbc/0x130 [i915] [70841.002586] i915_driver_cleanup_early+0x11/0x60 [i915] [70841.002621] i915_driver_load+0x708/0x1720 [i915] [70841.002629] ? trace_hardirqs_on_caller+0xe2/0x1c0 [70841.002664] i915_pci_probe+0x2d/0x90 [i915] [70841.002671] pci_device_probe+0x9c/0x120 [70841.002678] driver_probe_device+0x2a9/0x490 [70841.002684] __driver_attach+0xd9/0xe0 [70841.002690] ? driver_probe_device+0x490/0x490 [70841.002696] bus_for_each_dev+0x57/0x90 [70841.002702] bus_add_driver+0x1eb/0x260 [70841.002708] ? 0xffffffffa0685000 [70841.002713] driver_register+0x52/0xc0 [70841.002719] ? 0xffffffffa0685000 [70841.002724] do_one_initcall+0x39/0x170 [70841.002731] ? rcu_read_lock_sched_held+0x6f/0x80 [70841.002737] ? kmem_cache_alloc_trace+0x27b/0x2e0 [70841.002745] do_init_module+0x56/0x1ec [70841.002751] load_module+0x219e/0x2550 [70841.002758] ? vfs_read+0x121/0x140 [70841.002766] ? SyS_finit_module+0xa5/0xe0 [70841.002772] SyS_finit_module+0xa5/0xe0 [70841.002781] entry_SYSCALL_64_fastpath+0x22/0x8f Signed-off-by:
-
Matthew Auld authored
Try to catch a bug we've seen in the wild where the shrinker purges the pd/pdp from under us while allocating our paging structures. References: https://bugs.freedesktop.org/show_bug.cgi?id=104773Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180131191453.12676-1-matthew.auld@intel.comReviewed-by:
-
Chris Wilson authored
Commit e2b763ca ("drm/i915: Remove bitmap tracking for used-pdpes") believed that because it did not insert its freshly allocated page directory into the pd tree, it was safe from the shrinker. I failed to heed the lesson learnt from commit dd19674b ("drm/i915: Remove bitmap tracking for used-ptes") that we need to pin all the levels in the tree before hitting the shrinker or else the shrinker may free an upper layer as we proceed to allocate the tree. Thus leaving dangling pointers everywhere and a GPF should we hit direct reclaim at just the wrong moment. CPU: 0 PID: 7374 Comm: chromium Tainted: P O 4.14.13-1-ARCH #1 Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B33.1706181928 06/18/2017 task: ffff994f696c2c40 task.stack: ffffb1a789d4c000 RIP: 0010:gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: 0018:ffffb1a789d4f940 EFLAGS: 00010206 RAX: 81c1788cc4f68138 RBX: ffff994f54db8000 RCX: ffff994f696c2c40 RDX: 000000023bc73003 RSI: ffff994d598b6b80 RDI: ffff994f54db8000 RBP: ffff994d598b6b80 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb1a789d4f550 R11: ffff994eaf3c3208 R12: 0000000000000027 R13: 0000000000005000 R14: 0000000004e8f000 R15: ffff994f54dba000 FS: 00007f585886aa00(0000) GS:ffff994faec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004ac8e8 CR3: 00000002552c8004 CR4: 00000000003606f0 Call Trace: gen8_ppgtt_alloc_pdp+0x178/0x320 [i915] gen8_ppgtt_alloc_4lvl+0x5f/0x150 [i915] ppgtt_bind_vma+0x30/0x70 [i915] i915_vma_bind+0x68/0xd0 [i915] __i915_vma_do_pin+0x2d6/0x3a0 [i915] eb_lookup_vmas+0x7a2/0xb50 [i915] i915_gem_do_execbuffer+0x4d7/0x10e0 [i915] ? sock_wfree+0x34/0x60 ? unix_stream_read_generic+0x1f9/0x7e0 ? import_iovec+0x37/0xd0 ? i915_gem_execbuffer2+0x5d/0x390 [i915] i915_gem_execbuffer2+0x1b7/0x390 [i915] ? i915_gem_execbuffer+0x2d0/0x2d0 [i915] drm_ioctl_kernel+0x59/0xb0 [drm] drm_ioctl+0x2d5/0x370 [drm] ? i915_gem_execbuffer+0x2d0/0x2d0 [i915] ? __seccomp_filter+0x3b/0x260 do_vfs_ioctl+0xa1/0x610 ? syscall_trace_enter+0xdb/0x2b0 SyS_ioctl+0x74/0x80 do_syscall_64+0x55/0x110 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f584fa82d27 RSP: 002b:00007ffee14a7828 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000003b0126a1030 RCX: 00007f584fa82d27 RDX: 00007ffee14a7870 RSI: 0000000040406469 RDI: 0000000000000080 RBP: 00007ffee14a7870 R08: 0000000000000002 R09: 0000000000000077 R10: 00007f5839f2b780 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000080 R14: 00007f5842b00040 R15: 0000000000000000 Code: 01 00 83 81 58 0a 00 00 01 48 2b 05 13 9d fd c9 48 c1 f8 06 48 c1 e0 0c 48 8d 04 d0 48 8b 56 08 48 03 05 0c 9d fd c9 48 83 ca 03 <48> 89 10 83 a9 58 0a 00 00 01 65 ff 0d 37 03 fb 3e 74 02 f3 c3 RIP: gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: ffffb1a789d4f940 Reported-by:
Eric Blau <eblau@eblau.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104773 Fixes: e2b763ca ("drm/i915: Remove bitmap tracking for used-pdpes") References: dd19674b ("drm/i915: Remove bitmap tracking for used-ptes") Testcase: igt/drv_selftest/live_gtt (igt_ppgtt_shrink_boom) Signed-off-by:
-
- 31 Jan, 2018 12 commits
-
-
Paulo Zanoni authored
This enables the Mesa driver to advertise support for ARB_timer_query, and thus an OpenGL version higher than 3.2. Based on the CNL patch by Nanley Chery. v2: Rebase. Cc: Anuj Phogat <anuj.phogat@intel.com> Cc: Nanley Chery <nanley.g.chery@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Requested-by:
Anuj Phogat <anuj.phogat@intel.com> Tested-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-10-paulo.r.zanoni@intel.com
-
Kelvin Gardiner authored
This patch clears a single bit. The bit is 0 by default but expected not to be set. Explicitly clearing the bit in this patch is intended to indicate some thinking has occurred, and that we want this bit cleared and we are not just excepting the default value. We also stop setting GFX_RUN_LIST_ENABLE, which is correct since that bit is gone. v2 (from Paulo): fix indentation. v3: Changed GEN check to >= 11. Corrected author name. v4 (from Paulo): improve commit message (Daniele). Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Kelvin Gardiner <kelvin.gardiner@intel.com> Signed-off-by:
-
James Ausmus authored
ICL+ adds changes the PLANE_CTL_FORMAT field from [27:24] to [27:23], however, all existing PLANE_CTL_FORMAT_* definitions still map to the correct values. Add an ICL_PLANE_CTL_FORMAT_MASK definition, and use that for masking for the conversion to fourcc. v2: No changes v3: Change new definition name, drop comment (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Paulo Zanoni authored
It's 10us for gen 11. Reviewed-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
-
Mahesh Kumar authored
This patch introduce MBus control registers and their bit-fields MBUS_ABOX_CTL MBUS_BBOX_CTL MBUS_DBOX_CTL MBUS_UBOX_CTL Changes Since V1: - Use function like macros (Paulo) - fix copy-paste error (Paulo) Reviewed-by:
-
Mahesh Kumar authored
We don't have planar pixel format support implemented for ICL yet. ICL require 2 display planes to be allocated for Planar formats unlike previous GEN. So ICL/GEN11 doesn't require to write Y-plane ddb data in NV12_BUF_CFG register and PLANE_NV12_BUF_CFG register is removed in ICL. This patch removes the PLANE_NV12_BUF_CFG write for ICL. Changes Since V1: - Improve commit message as per Paulo's comment Reviewed-by:
-
Mahesh Kumar authored
ICL require DDB allocation of plane to be more than "minimum display buffer needed" for each level in order to enable WM level. This patch implements and consider the same while allocating DDB and enabling WM. Changes Since V1: - rebase Changes Since V2: - Remove extra parentheses - Use FP16.16 only when absolutely necessary (Paulo) Changes Since V3: - Rebase Changes since v4 (from Paulo): - Coding style issue. Changes since v5 (from Paulo): - Do the final checks according to BSpec. Reviewed-by:
-
Mahesh Kumar authored
GEN9/10 had fixed DBuf block size of 512. Dbuf block size is not a fixed number anymore in GEN11, it varies according to bits per pixel and tiling. If 8bpp & Yf-tile surface, block size = 256 else block size = 512 This patch addresses the same. v2 (from Paulo): - Make it compile. - Fix a few coding style issues. v3: - Rebase on top of upstream patches v4 (from Paulo): - Bikeshed if statements (James). Reviewed-by:
-
Mahesh Kumar authored
GEN9 onwards bypass path allocation of 4 blocks was needed, as per hardware design. ICL doesn't require bypass path allocation of 4 DDB blocks, handling the same in this patch. v2 (from Paulo): - No need for a comment that says what the code already says. Reviewed-by:
-
Chris Wilson authored
This is a precautionary measure as I have no evidence to suggest we've hit a bug here (I was hoping this might explain gdg's odd behaviour, but alas), but given that we have a function to flush the ggtt writes it seems prudent to use it prior to changing the fence register. Due to the intrinsic nature of the GTT often operating as an independent mmio path, we should not just rely on the write to the fence acting as a full flush for GTT writes. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130164457.14037-1-chris@chris-wilson.co.uk
-
Sagar Arun Kamble authored
guc_log_relay_file_create will return -EEXIST if we invoke relay_late_setup_files multiple times as part of i915_guc_log_control. However this is to be not cosidered as fail and need to return 0. This was mistakenly introduced in the below commit. Fix it. Fixes: 70deeadd "drm/i915/guc: Fix lockdep due to log relay channel handling under struct_mutex" Signed-off-by:
-
Chris Wilson authored
Previously, we relied on only running the hangcheck while somebody was waiting on the GPU, in order to minimise the amount of time hangcheck had to run. (If nobody was watching the GPU, nobody would notice if the GPU wasn't responding -- eventually somebody would care and so kick hangcheck into action.) However, this falls apart from around commit 4680816b ("drm/i915: Wait first for submission, before waiting for request completion"), as not all waiters declare themselves to hangcheck and so we could switch off hangcheck and miss GPU hangs even when waiting under the struct_mutex. If we enable hangcheck from the first request submission, and let it run until the GPU is idle again, we forgo all the complexity involved with only enabling around waiters. We just have to remember to be careful that we do not declare a GPU hang when idly waiting for the next request to be come ready, as we will run hangcheck continuously even when the engines are stalled waiting for external events. This should be true already as we should only be tracking requests submitted to hardware for execution as an indicator that the engine is busy. Fixes: 4680816b ("drm/i915: Wait first for submission, before waiting for request completion" Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840Signed-off-by:
-
- 30 Jan, 2018 9 commits
-
-
Rodrigo Vivi authored
On CNL SKUs that uses port F, max DP rate is 8.1G for all ports when we have the elevated voltage (higher than 0.85V). v2: Make commit message more generic. v3: Move conditions to a helper to get easier to read. (Ville). v4: Add a mention to the numerical voltage on commit message per Manasi request. v5: Thanks CI! "error: control reaches end of non-void function" Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-10-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Now let's finish the Port-F support by adding the proper port F detection, irq and power well support. v2: Rebase v3: Use BIT_ULL v4: Cover missed case on ddi init. v5: Update commit message. v6: Rebase on top of display headers rework. v7: Squash power-well handling related to DDI F to this patch to avoid warns as pointed out by DK. v8: Introduce DDI_F_LANES to PG2. (DK) v9: Squash in the PORT_F case for enabling DP MST encoder. (DK) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-9-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
On CNP boards that are using DDI F, bit 25 (SDE_PORTE_HOTPLUG_SPT) is representing the Digital Port F hotplug line when the Digital Port F hotplug detect input is enabled. v2: Reuse all existent structure instead of adding a new HPD_PORT_F pointing to pin of port E. v3: Use IS_CNL_WITH_PORT_F so we can start upstreaming this right now. If that SKU ever get a proper name we come back and update it. v4: Rebase on top of digital connected port using encoder instead of port. v5: Moved IS_CNL_WITH_PORT_F definition to the PCI IDs patch. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Rodrigo Vivi authored
Let's try to simplify this mapping to hpd_pin -> bit instead using port. So for CNL with port F where we have this port using hdp_pin and bits of other ports we don't need to duplicated the mapping. But for now this is only a re-org with no functional change expected. v2: Add missing lines and nuke @port reference from code documentation. (Ville) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Suggested-by: -
Rodrigo Vivi authored
On CNP Pin 3 is for misc of Port F usage depending on the configuration. For CNL that uses Port F, pin 3 is the one. v2: Make it more generic and update commit message. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Since when it got introduced with commit '555e38d2 ("drm/i915/cnl: DDI - PLL mapping")' the support for Port F was wrong, because Port F bits are far from bits used for A to E. Since Port F is not used so far we don't need to propagate Fixes back there. v2: Reuse _SHIFT definition to avoid complicated duplication (DK). Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
This was wrong since its introduction on commit '04416108 ("drm/i915/cnl: Add registers related to voltage swing sequences.")' But since no Port F was needed so far we don't need to propagate fixes back there. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
We also need to extend this WA to Aux F. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-3-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
On some Cannonlake SKUs we have a dedicated Aux for port F, that is only the full split between port A and port E. There is still no Aux E for Port E, as in previous platforms, because port_E still means shared lanes with port A. v2: Rebase. v3: Add couple missed PORT_F cases on intel_dp. v4: Rebase and fix commit message. v5: Squash Imre's "drm/i915: Add missing AUX_F power well string" v6: Rebase on top of display headers rework. v7: s/IS_CANNONLAKE/IS_CNL_WITH_PORT_F (DK) v8: Fix Aux bits for Port F (DK) v9: Fix VBT definition of Port F (DK). v10: Squash power well addition to this patch to avoid warns as pointed by DK. v11: Clean up squashed commit message. (David) v12: Remove unnecessary handling for older platforms (DK) Adding AUX_F to PG2 following other existent ones. (DK) Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
