1. 23 Oct, 2015 30 commits
  2. 18 Oct, 2015 3 commits
    • Linus Torvalds's avatar
      Linux 4.3-rc6 · 7379047d
      Linus Torvalds authored
      7379047d
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · c44b3255
      Linus Torvalds authored
      Pull i2c fixes from Wolfram Sang:
       "Here are some bugfixes for the I2C subsystem.
      
        Kieran found a flaw in the recently renewed wake irq handling.  Mika
        handled a user bug report where the ACPI info turned out to be
        unusable.  I updated MAINTAINERS so that such bug reports will sooner
        get to the right people.  Geert pointed me to a problem of some i2c
        drivers regarding PM which I fixed"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348
        MAINTAINERS: add maintainers for Synopsis Designware I2C drivers
        i2c: designware-platdrv: enable RuntimePM before registering to the core
        i2c: s3c2410: enable RuntimePM before registering to the core
        i2c: rcar: enable RuntimePM before registering to the core
        i2c: return probe deferred status on dev_pm_domain_attach
      c44b3255
    • Mika Westerberg's avatar
      i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 · 56d4b8a2
      Mika Westerberg authored
      ACPI SSCN/FMCN methods were originally added because then the platform can
      provide the most accurate HCNT/LCNT values to the driver. However, this
      seems not to be true for Dell Inspiron 7348 where using these causes the
      touchpad to fail in boot:
      
        i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
        i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
        i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
        i2c_designware INT3433:00: controller timed out
      
      The values received from ACPI are (in fast mode):
      
        HCNT: 72
        LCNT: 160
      
      this translates to following timings (input clock is 100MHz on Broadwell):
      
        tHIGH: 720 ns (spec min 600 ns)
        tLOW: 1600 ns (spec min 1300 ns)
        Bus period: 2920 ns (assuming 300 ns tf and tr)
        Bus speed: 342.5 kHz
      
      Both tHIGH and tLOW are within the I2C specification.
      
      The calculated values when ACPI parameters are not used are (in fast mode):
      
        HCNT: 87
        LCNT: 159
      
      which translates to:
      
        tHIGH: 870 ns (spec min 600 ns)
        tLOW: 1590 ns (spec min 1300 ns)
        Bus period 3060 ns (assuming 300 ns tf and tr)
        Bus speed 326.8 kHz
      
      These values are also within the I2C specification.
      
      Since both ACPI and calculated values meet the I2C specification timing
      requirements it is hard to say why the touchpad does not function properly
      with the ACPI values except that the bus speed is higher in this case (but
      still well below the max 400kHz).
      
      Solve this by adding DMI quirk to the driver that disables using ACPI
      parameters on this particulare machine.
      Reported-by: default avatarPavel Roskin <plroskin@gmail.com>
      Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
      Tested-by: default avatarPavel Roskin <plroskin@gmail.com>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Cc: stable@kernel.org
      56d4b8a2
  3. 17 Oct, 2015 3 commits
  4. 16 Oct, 2015 4 commits