Here's a patch against 2.5.3 for the USB vicam driver that removes the
use of interruptible_sleep_on() in the driver.  This patch was done by
Oliver Neukum.

Here's a patch against 2.5.3 for the USB core that fixes a possible
initialization bug for some platforms when allocating a new usb, and
changes the warning level on a message (it isn't an error.)  This patch
was done by Oliver Neukum and David Brownell.

Here's a patch against 2.5.3 for the USB stv680 driver that fixes two
bugs in the existing driver.  This patch was done by Kevin Sisson.

Here's a patch against 2.5.3 for the USB printer driver that does the
following:
	- removes the races inherent in sleep_on
	- uses 2.5 style of module usage counting
	- kills a lockup on failure of usb_submit_urb
This patch was done by Oliver Neukum.

Here's a patch against 2.5.3 for the USB pegasus driver that does the
following:
	- fixes __FUNCTION__ warnings on gcc-3.0.3 and up
	- added 3 more devices
	- fixed memory leak
This patch was done by Petko Manolov and Oliver Neukum.

Here's a patch against 2.5.3 for the USB kaweth driver that does the
following:
	- removes SMP deadlock
	- removes nfs deadlock
	- fixes a memory leak when the firmware is not loaded.
	- few other minor cleanups.
This patch was done by Oliver Neukum.

Here's a patch against 2.5.3 that updates the Config.help entries for
the USB microtek and hpusbscsi drivers.
This patch was done by Oliver Neukum.

Here's a patch against 2.5.3 that changes the maintainer of the USB
Kawasaki driver to Oliver Neukum.

09-64bit_bitops_fix-1.diff
    Bitopts arguments must be long, not int.

08-unfinished_rebuildtree_message.diff
    Give a proper explanation if unfinished reiserfsck --rebuild-tree
    run on a fs was detected.

07-remove_nospace_warnings.diff
    Do not print scary warnings in out of free space situations.

06-return_braindamage_removal.diff
    Kill stupid code like 'goto label ; return 1;'

05-kernel-reiserfs_fs_h-offset_v2.diff
    Convert erroneous le64_to_cpu to cpu_to_le64

04-nfs_stale_inode_access.diff
    This is to fix a case where stale NFS handles are correctly detected as
    stale, but inodes assotiated with them are still valid and present in cache,
    hence there is no way to deal with files, these handles are attached to.
    Bug was found and explained by
    Anne Milicia <milicia@missioncriticallinux.com>

03-key_output_fix.diff
    Fix all the places where cpu key is attempted to be printed as ondisk key

02-prealloc_list_init.diff
    prealloc list was forgotten to be initialised.

01-pick_correct_key_version.diff
    This is to fix certain cases where items may get its keys to be interpreted
    wrong, or to be inserted into the tree in wrong order. This bug was only
    observed live on 2.5.3, though it is present in 2.4, too.

Remove struct iobus.

There is a lot of duplication between struct device and struct iobus, both
in their members and the code in their interfaces. Waxing struct iobus
removes this duplication and makes things a bit simpler.

Patch 4: Add some default files for PCI devices.

This adds two files for PCI devices: 'irq' and 'resources'. They display
just those things and currently do nothing on write. These are the
examples for other subsystems to use for creating files ('Hey, look how
simple it is!')

Patch 3: Make default callbacks simpler.

I want to move as much to a 1 file/1 value model as possible. I haven't
come up with a clean way to enforce it except via social pressure.

This patch is a step in that direction. It:

- Reduces the output of 'power' to just the decimal state of the device
- Adds a 'name' file which exports just the device name
- Reduces the 'status' file to just export the bus ID. (This will change,
  since the bus ID is obvious based on what directory you're in, but it's
  another patch at another time)

Patch 1: Make device_driver_init() an initcall.
It declares it as subsys_initcall and removes the explicit call from
init/main.c::do_basic_setup().

Here is a patch to enhance xconfig to read the new Config.help files.
Olaf Dietsche wrote this, and Steven Cole passed it on to me.

Testing: Steven Cole tested it, and I tested it.

A trivial patch that fixes this irritation in my dmesg, 2.5.3:

megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001
)<5>megaraid: found 0x8086:0x1960:idx 0:bus 2:slot 5:func 1
scsi0 : Found a MegaRAID controller at 0xe089c000, IRQ: 12

Please apply.

Hi Linus,
    I've got strange idea and tried to build diskless machine around
2.5.3... Besides problem with segfaulting crc32 (it is initialized after
net/ipv4/ipconfig.c due to lib/lib.a being a library... I had to hardcode
lib/crc32.o before --start-group in main Makefile, but it is another
story) there is bad problem with NBD caused by BIO changes:

(1) request flags were immediately put into on-wire request format.
    In the past, we had 0=READ, !0=WRITE. Now only REQ_RW bit determines
    direction. As nbd-server from nbd distribution package treats any
    non-zero value as write, it performs writes instead of read. Fortunately
    it will die due to other consistency checks on incoming request, but...

(2) nbd servers handle only up to 10240 byte requests. So setting max_sectors
    to 20 is needed, as otherwise nbd server commits suicide. Maximum request size
    should be handshaked during nbd initialization, but currently just use
    hardwired 20 sectors, so it will behave like it did in the past.

This patch paves the way for a new driver which needs the
functionality.  Now parport_daisy_select actually _uses_ its mode
parameter.

	* drivers/parport/daisy.c: Make parport_daisy_select aware of
	its 'mode' parameter.
	* drivers/parport/ChangeLog: Updated.

This patch fixes a potential deadlock in ppdev.

	* drivers/char/ppdev.c: Watch out for errors from
	parport_claim_or_block.
	* drivers/parport/share.c: Watch out for signals.
	* drivers/parport/ChangeLog: Updated.

I finally found the reason that printer console sometimes acted up
(duh):

	* drivers/char/lp.c: Fix printer console.

This patch prevents ppdev from oopsing when the PPGETMODES ioctl is
used before a PPCLAIM.

	* drivers/char/ppdev.c: Fix an oops in PPGETMODES handling.

This patch (from 2.4.x) cleans up the use of the ECR in parport_pc.

	* drivers/parport/parport_pc.c: Integrate fixes and cleanups
	from Damian Gruszka (VScom).
	* drivers/parport/ChangeLog: Updated.

Gets sparc64 in sync with 2.5.3 final changes.

Missing smp_lock.h inclusion.

linux/malloc.h --> linux/slab.h

I made a typo the other weeks while renaming the interfaces for you,
oops.  Please apply, thanks.

MINOR --> minor
MKDEV --> mk_kdev

The usual "u64 is long long only on some platforms" problem.

I think I told you to revert this bit from 2.5.3, but here
it is in patch form anyways.  Whoever made this change didn't
read the driver, and well... didn't even build test it either :-)

Don't offer SunLANCE twice.

- Doug Ledford: i810 audio driver update
- Evgeniy Polyakov: update various SCSI drivers to new locking
- David Howells: syscall latency improvement, try 2
- Francois Romieu: dscc4 driver update
- Patrick Mochel: driver model fixes
- Andrew Morton: clean up a few details in ext3 inode initialization
- Pete Wyckoff: make x86 machine check print out right address..
- Hans Reiser: reiserfs update
- Richard Gooch: devfs update
- Greg KH: USB updates
- Dave Jones: PNPBIOS
- Nathan Scott: extended attributes
- Corey Minyard: clean up zlib duplication (triplication..)

- Asit Mallick: mtrr update
- Patrick Mochel: split up kernel/device.c into drivers/base
- Mikael Pettersson/Al Viro: fix missing in-core inode initialization
in ext2 introduced by Al's inode trimming
- David Miller: sparc and network updates
- Frank Davis: firewire video mmap page remapping fix
- me: fix configure help scripts to fix breakage noticed by Dave Jones
- Greg KH: USB updates
- Kai Germaschewski: ISDN fixes, Config.help entries
- Douglas Gilbert: SCSI doc update
- Ingo Molnar: x86 taskswitch optimizations, scheduler updates
- Mikael Pettersson: make APIC work on old external setups
- Al Viro: more inode trimming