- 14 Aug, 2012 12 commits
-
-
Mauro Carvalho Chehab authored
The remaining dvb drivers are pci, so rename them to match the bus. Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
As media/dvb will be removed, move it to a proper place. Signed-off-by: -
Mauro Carvalho Chehab authored
Move firewire to one level up, as the dvb subdirectory will be removed. Signed-off-by: -
Mauro Carvalho Chehab authored
Raise the DVB frontends one level up, as the intention is to remove the drivers/media/dvb directory. Signed-off-by: -
Mauro Carvalho Chehab authored
just like the V4L2 core, move the DVB core to drivers/media, as the intention is to get rid of both "video" and "dvb" directories. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/rc/Kconfig:291:warning: multi-line strings not supported Signed-off-by: -
Malcolm Priestley authored
Functional changes PID filter is default to off and controlled from dvb-usb-v2 Driver now supports suspend and resume changes in dvb-usb-v2 USB bus repeater functions have been removed. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Javier Martin authored
Support for i.MX25 in mx2_camera.c has been broken for a year. Furthermore, i.MX25 video capture HW doesn't have much in common with i.MX27. A separate driver would be desirable. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
Javier Martin authored
i.MX25 support is known to have been broken for almost a year. Signed-off-by:
-
Sachin Kamat authored
devm_kzalloc() eliminates the need to free explicitly thereby making the code a bit simpler. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Manoel Pinheiro authored
The correct place to put i2c_gate_ctrl is before calling tda18271_attach, because the driver tda18271 will use it to enable or disable the i2c-bus from the demodulator to the tuner. And thus eliminate the error message: "Unknown device (255) detected @ 1-00c0, device not supported" in the driver tda18271. In the device kworld_sbtvd (hybrid analog and digital TV) the control of the i2c-bus to tuner is done in the analog demodulator and not in the digital demodulator. Signed-off-by:
Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by:
-
- 13 Aug, 2012 28 commits
-
-
David Härdeman authored
The lirc TX functionality expects the process which writes (TX) data to the lirc dev to sleep until the actual data has been transmitted by the hardware. Since the same timeout calculation is duplicated in more than one driver (and would have to be duplicated in even more drivers as they gain TX support), it makes sense to move this timeout calculation to the lirc layer instead. At the same time, centralize some of the sanity checks. Signed-off-by:
David Härdeman <david@hardeman.nu> Cc: Jarod Wilson <jwilson@redhat.com> Signed-off-by:
-
Malcolm Priestley authored
On Mon, 2012-08-13 at 19:58 +0300, Dan Carpenter wrote: > Hello Mauro Carvalho Chehab, > > The patch db6651a9: "[media] lmedm04: fix build" from Aug 12, > 2012, leads to the following warning: > drivers/media/dvb/dvb-usb-v2/lmedm04.c:769 lme2510_download_firmware() > error: usb_control_msg() 'data' too small (128 vs 265) > > 737 data = kzalloc(128, GFP_KERNEL); > ^^^ > data is 128 bytes. Control isn't used, so remove it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Michael Krufky authored
When the TEI bit is raised, we should not trust any of the contents of the packet in question, including but not limited to its PID number. Considering that we don't trust the PID number of this packet, we should not proceed to check the packet counter (if dvb_demux_tscheck is set). We should expect to see at least one discontinuity after a bad packet is received, so any time a TEI is detected, a following TS packet counter mismatch is to be expected. There is no real reason to ever allow bad packets to pass through the kernel demux, other than for purposes of attempting error correction via software or statistical information. However, since we have always passed these bad packets though the demux, we should not change this default behavior. Without altering module options, this patch merely prevents the TS packet counter check on packets containing a raised TEI. If module option dvb_demux_feed_err_pkts is set to 0, the kernel demux will drop these error packets entirely, preventing any possibility of corruption caused by userspace programs that are expecting valid data. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Emil Goode authored
This patch fixes the following sparse warnings by removing use of duplicate const. drivers/media/video/cx88/cx88.h:152:40: warning: duplicate const drivers/media/video/cx88/cx88-core.c:256:33: warning: duplicate const drivers/media/video/cx88/cx88-alsa.c:769:41: warning: duplicate const As commented by Jonathan Nieder: These double "const" were introduced in v2.6.37-rc1~64^2~464 (V4L/DVB: drivers/media: Make static data tables and strings const, 2010-08-25). The address of an array is already immutable by definition, so for what it's worth, with or without a clarified commit message, [mchehab@redhat.com: Tested with "gcc -s" (version 4.7.0): the produced asm is indeed equal before and after this patch] Signed-off-by:
Emil Goode <emilgoode@gmail.com> Acked-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
No functional changes. It just improves the description of the frontend status, using Documentation/kernel-doc-nano-HOWTO.txt for the status enumeration, and a table inside the DocBook. Signed-off-by: -
Timo Kokkonen authored
The IR diode on the RX51 is connected to the GPT9. This data is needed for the IR driver to function. Signed-off-by:
Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
-
Timo Kokkonen authored
This is the driver for the IR transmitter diode found on the Nokia N900 (also known as RX51) device. The driver is mostly the same as found in the original 2.6.28 based kernel that comes with the device. The following modifications have been made compared to the original driver version: - Adopt to the changes that has happen in the kernel during the past five years, such as the change in the include paths - The OMAP DM-timers require much more care nowadays. The timers need to be enabled and disabled or otherwise many actions fail. Timers must not be freed without first stopping them or otherwise the timer cannot be requested again. The code has been tested with sending IR codes with N900 device running Debian userland. The device receiving the codes was Anysee DVB-C USB receiver. Signed-off-by:
-
Antti Palosaari authored
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Andy Shevchenko authored
[crope@iki.fi: fix trivial merge conflict] Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
This callback were meant to allow overriding a FE callback, before its call, but it is not really needed, as the callback can be intercepted after tuner attachment. Worse than that, only DVBv3 calls are intercepted this way, so a DVBv5 application will produce different effects than a DVBv3 one. So, get rid of it. Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Julia Lawall authored
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. In two cases, the original memory allocation function was kmalloc, which has been changed to a zeroing allocation to benefit from the devm function. Signed-off-by:
-
Julia Lawall authored
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by:
-
Sean Young authored
There is a proper ene0100 driver anyway. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
This has been replaced by the ttusbir driver. Signed-off-by:
-
Sean Young authored
Currently write() will return 0 if an IR device does not support sending. Signed-off-by:
-
Sean Young authored
This simplies the code and resolves a possible race condition between ir_raw_decode_timer_end() and saa7134_raw_decode_irq(). If the interrupt handler is called after ir_raw_decode_timer_end() calls ir_raw_event_handle() but before clearing ir->active, then the timer won't be rearmed. Compile tested only. Signed-off-by:
-
Sean Young authored
The TechnoTrend USB IR Receiver sends 125 ISO URBs per second, even when there is no IR activity. Reduce the number of wake ups from the other drivers too. This saves about 0.25ms/s on a 2.4GHz Core 2 according to powertop. Signed-off-by:
-
Sean Young authored
This driver adds support for TechnoTrend USB IR Receiver. It is a complete rewrite of the staging/media/lirc/lirc_ttusbir driver. It adds more accurate sample reporting and led control. Signed-off-by:
-
Sean Young authored
The Pioneer CU-700 remote causes receiver overflows if you hold down any button. The remote does not send NEC IR repeats, it repeats the entire NEC code after 20ms. The iguanair hardware advertises an interval of 10 which just not enough; with 100 URBs per second and at most 7 edges per URB, we handle at most 700 edges per second. The remote generates about 900. Signed-off-by:
-
