- 15 Jun, 2012 18 commits
-
-
Peter Meerwald authored
Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
The ADIS163xx variants use a different register address for the auxiliary ADC channel than the ADIS16400. This patch fixes them to use the correct address. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
Lars-Peter Clausen authored
The channel spec for ADUS16334's temperature channel uses the address and scan index for the Z-axis acceleration channel. This patch fixes it to use the temperature channel address and scan index instead. Signed-off-by:
-
Lars-Peter Clausen authored
The ADIS16300 uses the same address for the temperature register as the ADIS16350 and not the same as the ADIS16400. Signed-off-by:
-
Lars-Peter Clausen authored
In the current driver ROLL_OUT register address is the same as the PITCH_OUT register address. This patch fixes it to use the correct address. Signed-off-by:
-
Axel Lin authored
Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
-
Leed Aguilar authored
Removed the following sparse warning: In function 'adis16080_read_raw': warning: 'ut' may be used uninitialized in this function Signed-off-by:
Leed Aguilar <leed.aguilar@ti.com> Acked-by:
-
H Hartley Sweeten authored
The PDEBUG macro is used to output a bunch of debug messages in the driver. These messages might be useful when first creating the driver but they shouldn't be in mainline. Remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
H Hartley Sweeten authored
The ISR_PDEBUG macro is used to output trace messages in the isr routine. This shouldn't be in a mainline driver. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
With the PORT_PDEBUG macro remove we can now remove the inline port io wrappers. Signed-off-by:
-
H Hartley Sweeten authored
The PORT_PDEBUG macro is used to output the result of every port io operation. This shouldn't be in a mainline driver. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
The CALL_PDEBUG macro is used to do function tracing in the driver. There are better ways to do this. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
The PCL812_EXTDEBUG define enables a bunch of function tracing debug messages as well as a dump of the comedi_cmd info during the cmdtest. There are better ways to do the function tracing and the cmdtest dump shouldn't be in the driver. Just remove all of it. Signed-off-by:
-
H Hartley Sweeten authored
The step 2 tests to make sure that the triggers are unique is not needed for single source triggers. These were already trivially validated in step 1. Signed-off-by:
-
H Hartley Sweeten authored
The step 2 tests of the start_src, scan_begin_src, and scan_end_src triggers to make sure they are unique are not needed. These triggers all only have one source and it was trivially validated in step 1. Signed-off-by:
-
H Hartley Sweeten authored
The step 2 tests of the start_src, scan_begin_src, and scan_end_src triggers to make sure they are unique are not needed. These triggers all only have one source and it was trivially validated in step 1. Signed-off-by:
-
H Hartley Sweeten authored
These printk's are #ifdef'ed out with an undefined symbol anyway. Just remove them. Signed-off-by:
-
Sasha Levin authored
Currently the amount of pools each client can use is limited to 16, this is and arbitrary limit which isn't really required by current implementation. This places and arbitrary limit on the number of mounted filesystems that can use cleancache. This patch removes that limit and uses IDR to do sparse mapping of pools in each client. Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
- 14 Jun, 2012 22 commits
-
-
Bart Westgeest authored
Changed setting the status bits to a byte-oriented approach. Number of written status bits is now based on VHCI_NPORT, instead of casting status buffer to a long. This fixes a stack corruption bug on 64-bit based architectures, and potential byte order / endianness related issues. In addition updated function comments, and log statements. Signed-off-by:
Bart Westgeest <bart@elbrys.com> Signed-off-by:
-
Seth Jennings authored
This patch fixes an uninitialized variable warning in alloc_zspage(). It also fixes the secondary issue of prev_page leaving scope on each loop iteration. The only reason this ever worked was because prev_page was occupying the same space on the stack on each iteration. Signed-off-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
H Hartley Sweeten authored
Add whitespace to the _8255_* defines to improve readability. Signed-off-by:
-
H Hartley Sweeten authored
The name 'do_config' is pretty generic, and this function is the only one in this driver without namespace. Add namespace to it just to avoid any issues. Signed-off-by:
-
H Hartley Sweeten authored
The subdev_8255_interrupt function indirectly calls subdev_8255_io. For aesthetic reasons, move the subdev_8255_io function. Signed-off-by:
-
H Hartley Sweeten authored
Refactor the subdev_8255_insn function to follow what the user space library is doing. 1) This function requires 'data' to contain 2 parameters. Add a sanity check for this (insn->n != 2). 2) The 'data' parameters are actually a 'mask' of the valid bits and the actual 'bits' to modify. Create local variables of these names to help with maintainability. 3) The value returned in data[1] reflects the actual state of the 8255 io pins after the update of the masked bits. Fetch this data in a local variable and then set data[1]. 4) The user space library only checks for a < 0 return to indicate an error. It appears that the 'return 2' in this function is supposed to indicate the number of data parameters used to perform the command. Return the insn->n value for this, the open coded '2' looks wrong. Signed-off-by:
-
H Hartley Sweeten authored
To improve readability, use a locale variable to hold the 8255's private iobase value. Signed-off-by:
-
H Hartley Sweeten authored
Signed-off-by:
-
H Hartley Sweeten authored
The initialization of the 8255 subdevice can fail. Make sure to check for it. Signed-off-by:
-
H Hartley Sweeten authored
The have_irq variable in the 8255 private data is not used by the driver, remove it. This removes the need to access the private data in the subdev_8255_init_irq function. Also, add a bit of whitespace to improve the readability. Signed-off-by:
-
H Hartley Sweeten authored
Refactor the initialization of the 8255 so that the private data allocation is done before the subdevice is setup. This makes sure that the setup is complete. Also, add a bit of whitespace to improve the readability. Signed-off-by:
-
H Hartley Sweeten authored
Push out the rename of the private variables to improve the readability of the driver. Signed-off-by:
-
H Hartley Sweeten authored
The 8255's private data variables cb_arg and cb_func are actually the iobase for the 8255 device and the pointer to the io function to access the device. Rename them as such to improve the readability of the driver. Signed-off-by:
-
H Hartley Sweeten authored
The macros CALLBACK_ARG, CALLBACK_FUNC, and subdevpriv all rely on a a local variable having a specific name. Replace the macros with local variables wherever they occur. Signed-off-by:
-
H Hartley Sweeten authored
Rename the 8255's private data structure from subdev_8255_struct to subdev_8255_private. Signed-off-by:
-
H Hartley Sweeten authored
Instead of accessing the dev->subdevices directly as an array, use a pointer. This method is more common in the comedi subsystem. Signed-off-by:
-
H Hartley Sweeten authored
Replace the printk calls with dev_info, dev_warn, etc. Signed-off-by:
-
Peter Huewe authored
This patch cleans up the vb_device_info struct and the related functions. The cleanup decreases the size of the compiled module by about 10kB. == Remove fields in vb_device_info that are never read: == pOutputSelect pRGBSenseData pRGBSenseData2 pVideoSenseData pVideoSenseData2 pYCSenseData pYCSenseData2 CR49 pXGINew_I2CDefinition pCR2E pCR2F pCR46 pCR47 pCRD0 pCRDE pSR40 pSR41 pCR47 === Remove the corresponding 'constants' === XGI330_RGBSenseData XGI330_RGBSenseData2 XGI330_VideoSenseData XGI330_VideoSenseData2 XGI330_YCSenseData XGI330_YCSenseData2 XGI330_CR49 XG40_I2CDefinition XG21_CR2E XG21_CR2F XG21_CR46 XG21_CR47 XG27_CRD0 XG27_CRDE XGI330_OutputSelect == Remove 'constant fields' and replace constant value with #define == pSR07 = XGI330_SR07 -> 0x18 pSR1F = XGI330_SR1F -> 0 pSR23 = XGI330_SR23 -> 0xf6 pSR24 = XGI330_SR24 -> 0x0d pSR33 = XGI330_SR33 ->0 pCRT2Data_1_2 = XGI330_CRT2Data_1_2 -> 0 pCRT2Data_4_D = XGI330_CRT2Data_4_D -> 0 pCRT2Data_4_E = XGI330_CRT2Data_4_E -> 0 pCRT2Data_4_10 = XGI330_CRT2Data_4_10 -> 0x80 pSR36 = XG27_SR36 -> 0x30 pCR8F = &XG27_CR8F -> 0x0C pSR40 = XG27_SR40 -> 0x04 pSR41 = XG27_SR41 ->0x00 pSR31 = XGI330_SR31 -> 0xc0 pSR32 = XGI330_SR32 -> 0xc0 SR25 = XGI330_sr25 -> 0 (we only use XGI330_sr25[0]) == Constant fields with 'dead' code: == pSoftSetting is set to XGI330_SoftSetting = 0x30 -> if (*pVBInfo->pSoftSetting & SoftDRAMType) is never true since SoftDRAMType = 0x80 -> if (*pVBInfo->pSoftSetting & ModeSoftSetting) is never true since ModeSoftSetting = 0x04 --> remove the code, remove pSoftSetting, remove XGI330_SoftSetting pDVOSetting is set to XG21_DVOSetting = 0 -> if (((*pVBInfo->pDVOSetting) & 0xC0) == 0xC0) is never true --> remove the code, remove pDVOSetting, remove XG21_DVOSetting pXGINew_DRAMTypeDefinition is set to &XG40_DRAMTypeDefinition 0xFF -> if (*pVBInfo->pXGINew_DRAMTypeDefinition != 0x0C) is always true --> remove the if and remove pXGINew_DRAMTypeDefinition remove XG40_DRAMTypeDefinition == Replace pointer to unsigned char with unsigned char variable and assign value of referenced pointer: == pSR21 -> SR21, remove XGI330_SR21 pSR22 -> SR22, remove XGI330_SR22 pXGINew_CR97 -> XGINew_CR97, remove XG20_CR97, XG27_CR97 and Z11m_CR97 Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Peter Huewe authored
This patch replaces some of the XGI internal structs by their counterparts in the SiS driver. XGI330_LVDSDataStruct -> SiS_LVDSData XGI330_LCDDataStruct -> SiS_LCDData XGI330_CHTVDataStruct -> SiS_LVDSData Signed-off-by:
-
Peter Huewe authored
For TV Devices: The values taken from XGI_TVDelayList are always overwritten with the values from XGI_TVDelayList2 since the if condition for using the values from XGI_TVDelayList2 is identical with the check to enter this scope and thus always true. The delay values in XGI_TVDelayList2 is always 0x22 so we can simply replace it with this constant value. For LCD Devices: The LCD_DelayCompensation field is always set to 0x12 so we can simply replace this field with a constant value. This saves about 500 bytes in compiled size. Signed-off-by:
-
Peter Huewe authored
Since XGI_CloseCRTC does not perform anything useful we can simply remove it. Signed-off-by:
-
Peter Huewe authored
This patch simplyfies the XGI_GetVCLK2Ptr a bit by moving the +=25 to a define and removing statements without effect. Signed-off-by:
-
