- 10 Jun, 2024 4 commits
-
-
Guenter Roeck authored
Add support for reading SPD NVMEM data from SPD5118 (Jedec JESD300) compliant memory modules. NVMEM write operation is not supported. NVMEM support is optional. If CONFIG_NVMEM is disabled, the driver will still instantiate but not provide NVMEM attribute files. Reviewed-by:
Thomas Weißschuh <linux@weissschuh.net> Tested-by:
Armin Wolf <W_Armin@gmx.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Add suspend/resume support to ensure that limit and configuration registers are updated and synchronized after a suspend/resume cycle. Cc: Armin Wolf <W_Armin@gmx.de> Cc: Stephen Horvath <s.horvath@outlook.com.au> Reviewed-by:
Stephen Horvath <s.horvath@outlook.com.au> Tested-by:
-
Guenter Roeck authored
Add support for SPD5118 (Jedec JESD300) compliant temperature sensors. Such sensors are typically found on DDR5 memory modules. Cc: René Rebe <rene@exactcode.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by:
-
Guenter Roeck authored
Add bindings for the SPD hub present in DDR5 modules. (https://www.jedec.org/standards-documents/docs/jesd300-5b01). Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
- 08 Jun, 2024 35 commits
-
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/asus_atk0110.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/corsair-cpro.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/mr75203.o Add all missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240607-md-drivers-hwmon-v1-1-1ea6d6fe61e3@quicinc.comSigned-off-by:
-
Javier Carrasco authored
Switch to the _scoped() version introduced in commit 365130fd ("device property: Introduce device_for_each_child_node_scoped()") to remove the need for manual calling of fwnode_handle_put() in the paths where the code exits the loop early. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240404-hwmon_device_for_each_child_node_scoped-v1-2-53997abde43c@gmail.comSigned-off-by:
-
Javier Carrasco authored
Switch to the _scoped() version introduced in commit 365130fd ("device property: Introduce device_for_each_child_node_scoped()") to remove the need for manual calling of fwnode_handle_put() in the paths where the code exits the loop early. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20240403203633.914389-32-afd@ti.comSigned-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Krzysztof Kozlowski authored
Use spi_get_device_match_data() helper to simplify a bit the driver. Also kernel_ulong_t type is preferred for kernel code over uintptr_t (needed for the cast). Signed-off-by:
-
- 04 Jun, 2024 1 commit
-
-
Christian Marangi authored
Add support for g761 PWM Fan Controller. The g761 is a copy of the g763 with the only difference of supporting and internal clock. The internal clock is used if no clocks property is defined in device node and in such case the required bit is enabled and clock handling is skipped. The internal clock oscillator runs at 31KHz. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20240604164348.542-3-ansuelsmth@gmail.comSigned-off-by:
-
