- 07 Mar, 2010 19 commits
-
-
Krishna Gudipati authored
MS module did not invoke fdmi offline in all cases, call fdmi offline when ms module receives a port offline, so that fdmi offline is from one place in the ms module. Make changes to handle 10G speed in the conversion routine. Replaced the usage of bfa_adapter_attr_s struct with specific API's. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Modified the portstats get/clear logic for port physical/FCoE/QoS stats. Added more stats to FC Fixed some issues with FCoE stats collection. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
bfa_ioc_attr_s is a big structure and some times could cause stack overflow if defined locally, so add specific APIs that are needed to replace the use of ioc_attr local var. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Rename pport structures to fcport in BFA FCS, to resolve confusion about the port structures in the firmware, and make sure the SG page is setup correctly. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Currently BFA was not checking for IOC down condition when issuing getstats/clearstats Add check to see if IOC is operational, before issuing getstats/clearstats. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Use dummy interrupt handlers till chip initialization is complete. Install real interrupt handlers after chip initialization. Also removed msix installation code in bfa_iocfc_init(). Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Fixed the issue of not acknowledging the command queue full-to-non-full interrupt. Implemented separate acknowledging functions for different ASIC and interrupt mode. Fixed the case of missing CPE interrupt by always processing the pending requests in the completion path. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
ioc_recover failed to work in fcmode. Fixed the code to initialize the ioc_regs.err_set during the notify_hbfail. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Replace enum types with int and rearrange the fields to fix some alignment issue. Local var ioc_attr is causing the stack to overflow, so removed the usage of the local ioc_attr var and now invoking an API to return the ioc_type. Fix some AEN issues. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Introduce a link notification state machine to handle next incoming link events while the current event is being delivered to the driver. When the event has been processed by the driver, the link notification state machine will queue the next event (if there is any) to the driver. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Made FCS authentication related changes to state machines and header files. Made changes in FCS state machines to handle the case when secret string is NULL. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Changed PCI VPD to incorporate specific OEM vendors. Added FCoE specific interrupt latency and delay params. Added some variables needed by FIP 2.0. Added some new logging and tracing definitions. Added reserved members to make the structures (IOC, IOCFC) 64bit aligned. Changed the module identifiers, as some files were moved. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Copy fpma MAC when requested by user space application. Added FPMA mac address to the lport attributes structure. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Make sure that in direct attach mode, we do not query the name server after a target is marked offline. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Replace bfa_assert() with bfa_sm_fault() to get unhandled events for debugging. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Clear LL_HALT and PSS_ERR bit in the interrupt status register on an IOC crash. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Add support for faster IOC recovery after failure. Split bfa_ioc.c into three files: bfa_ioc.c: Common code shared between crossbow and catapult ASIC's. bfa_ioc_cb.c: Code specific to the crossbow, reg mapping and interrupt related routines. bfa_ioc_ct.c: Code specific to the catapult, reg mapping and interrupt related routines. Fix to make sure IOC reinitialize's properly on enable request - update the ioc_fwstate reg with BFI_IOC_FAIL on ioc disable mbox cmd timeout. Makefile changes to support the 2 newly added files bfa_ioc_cb.c and bfa_ioc_ct.c. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
- 04 Mar, 2010 8 commits
-
-
Krishna Gudipati authored
bfad.c & bfad_drv.h: * Created a kernel thread from pci_probe that does the bfad start operations after BFA init done on a firmware mismatch. * The kernel thread on a fw mismatch waits for an event from IOC call back and is woken up from bfa_cb_init() on BFA init success. * In normal cases of no firmware mismatch this thread is terminated in pci_probe. bfa_fcs_lport.c, fabric.c, fcs_lport.h & vport.c: * Split the lport init to attach time and init time code, so that proper config attributes are set after firmware mismatch. bfa_iocfc.c: * Handle an IOC timer issue, where the IOC timer would expire before the init completion and send Init fail event to the driver, however IOC init continues and completes successfully at the later stage. The bfa and driver were not handling this kind of deferred init completion. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Brocade CNA currently supports only 190 vports (instead of 191), since there are only 192 unicast cam entries reserved for FCoE. Brocade CNA has a total of 256 unicast cam entries (192 FCoE + 64 LL) 192 cam entries = 1 burned in mac + 1 baseport FPMA mac + 190 vport FPMA macs. Made changes to the code to support only 190 vports. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Split bfa_fcs_init() into bfa_fcs_attach() and bfa_fcs_init(). Removed empty function definitions in FCS modules Modified driver to call bfa_fcs_attach() and bfa_fcs_init() as needed. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Added a FCS function to be called during driver init, to set the FDMI Driver parameter. fdmi.c: Created a disabled state when fdmi is disabled. bfad.c: * Added fdmi_enable driver parameter. * Added support to call bfa_fcs_set_fdmi_param() to initialize fcs fdmi setting. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
bfa_intr.c: Enable new halt interrupt in BFA. bfi_ctreg.h: Expose new halt interrupt bit definition to host. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
bfa_ioc.c: - Enable IOC auto-recovery by default. - When CNA is in FC mode, return IOC type as FC (not FCoE) bfa_iocfc.c: - Set fcmode before pci initialization/setup. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Clear virtual links was not propagated upwards to bfa from fw. This resulted in HBA and switch being in an inconsistent state. So defined a new LPS event for clear virtual link on a vport, and also now clear virtual link on a baseport, is sent as a link down event from the fw. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Added separate MSI-X module parameters to selectively enable / disable MSI-X interrupts for both Brocade HBA and CNA's. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
- 03 Mar, 2010 13 commits
-
-
James Bottomley authored
RAID attributes uses scsi_is_sdev_device() to gate some SCSI specific checking code. This causes two problems. Firstly if SCSI == n just defining scsi_is_sdev_device() to return false might not be enough to prevent gcc from emitting the code (and thus referring to undefined symbols), so this needs surrounding with an ifdef. Secondly, using scsi_is_sdev_device() when SCSI is either y or m gives a subtle problem in the m case: raid_attrs must also be m to use the symbol. Do the usual Kconfig jiggery-pokery to fix this. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Boaz Harrosh authored
Doing CHECK="smatch --two-passes gives: drivers/scsi/osd/osd_initiator.c +1435 osd_finalize_request warning: assignment to 'ret' was never used Which is an unchecked possible allocation failure, Fixed. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Martin K. Petersen authored
Commit e3deec09 incorrectly assumed that the B0 and B1 page lengths were limited to 32 bytes. The B0 VPD page length is defined to be 64 bytes when the device supports thin provisioning. B1 is always defined to be 64 bytes. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
James Smart authored
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
James Smart authored
- Added round robin FCF failover on initial or FCF rediscovery FLOGI failure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
James Smart authored
- Prevent Vport discovery after reg_new_vport completes when physical logged in using FDISC. - Remove fast FCF failover fabric name matching. Allow failover to FCFs connected to different fabrics. - Added fast FCF failover in response to FCF DEAD event on current FCF record. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
James Smart authored
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
James Smart authored
- Clear LPFC_DRIVER_ABORTED on FCP command completion. - Clear exchange busy flag when I/O is aborted and found on aborted list. - Free sglq when XRI_ABORTED event is processed before release of IOCB. - Only process iocb as aborted when LPFC_DRIVER_ABORTED is set. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
James Smart authored
- Add Logging message for critial errors. - Remove unused variable from lpfc_nodev_tmo_show - Update supress_link_up parameter with #define values. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
James Smart authored
- Add NULL checks to the pointers for the config_async mailbox and dump_wakeup_params mailbox. - Add code to check return value of lpfc_read_sparams everywhere and handle failures appropriately. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Stephen M. Cameron authored
This uses the scatter-gather chaining feature of Smart Array controllers. 32 scatter-gather elements are embedded in the "command list", and the last element in the list may be marked as a "chain pointer", and point to an additional block of scatter gather elements. The precise number of scatter gather elements supported is dependent on the particular kind of Smart Array, and is determined at runtime by querying the hardware. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-