- 25 Jul, 2014 1 commit
-
-
Mark Rustad authored
Resolve missing-field-initializers warnings seen in W=2 kernel builds by having macros generate more elaborated initializers. That is enough to silence the warnings. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 24 Jul, 2014 4 commits
-
-
Paolo Bonzini authored
Using ARRAY_SIZE directly makes it easier to read the code. While touching the code, replace the division by a multiplication in the recently added BUILD_BUG_ON. Signed-off-by: -
Nadav Amit authored
Currently there is no check whether shared MSRs list overrun the allocated size which can results in bugs. In addition there is no check that vmx->guest_msrs has sufficient space to accommodate all the VMX msrs. This patch adds the assertions. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Nadav Amit authored
x86 does not automatically set rflags.rf during event injection. This patch does partial job, setting rflags.rf upon fault injection. It does not handle the setting of RF upon interrupt injection on rep-string instruction. Signed-off-by:
-
Nadav Amit authored
This patch updates RF for rep-string emulation. The flag is set upon the first iteration, and cleared after the last (if emulated). It is intended to make sure that if a trap (in future data/io #DB emulation) or interrupt is delivered to the guest during the rep-string instruction, RF will be set correctly. RF affects whether instruction breakpoint in the guest is masked. Signed-off-by:
-
- 22 Jul, 2014 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-20140721' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next Bugfixes -------- - add IPTE to trace event decoder - document and advertise KVM_CAP_S390_IRQCHIP Cleanups -------- - Reuse kvm_vcpu_block for s390 - Get rid of tasklet for wakup processing
-
- 21 Jul, 2014 19 commits
-
-
Nadav Amit authored
Haswell and newer Intel CPUs have support for RTM, and in that case DR6.RTM is not fixed to 1 and DR7.RTM is not fixed to zero. That is not the case in the current KVM implementation. This bug is apparent only if the MOV-DR instruction is emulated or the host also debugs the guest. This patch is a partial fix which enables DR6.RTM and DR7.RTM to be cleared and set respectively. It also sets DR6.RTM upon every debug exception. Obviously, it is not a complete fix, as debugging of RTM is still unsupported. Signed-off-by:
-
Paolo Bonzini authored
Make nested_release_vmcs12 idempotent. Tested-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
-
Paolo Bonzini authored
free_nested needs the loaded_vmcs to be valid if it is a vmcs02, in order to detach it from the shadow vmcs. However, this is not available anymore after commit 26a865f4 (KVM: VMX: fix use after free of vmx->loaded_vmcs, 2014-01-03). Revert that patch, and fix its problem by forcing a vmcs01 as the active VMCS before freeing all the nested VMX state. Reported-by:
-
Nadav Amit authored
Defining XE, XM and VE vector numbers. Signed-off-by:
-
Nadav Amit authored
If the RFLAGS.RF is set, then no #DB should occur on instruction breakpoints. However, the KVM emulator injects #DB regardless to RFLAGS.RF. This patch fixes this behavior. KVM, however, still appears not to update RFLAGS.RF correctly, regardless of this patch. Signed-off-by:
-
Nadav Amit authored
RFLAGS.RF was cleaned in several functions (e.g., syscall) in the x86 emulator. Now that we clear it before the execution of an instruction in the emulator, we can remove the specific cleanup of RFLAGS.RF. Signed-off-by:
-
Nadav Amit authored
When an instruction is emulated RFLAGS.RF should be cleared. KVM previously did not do so. This patch clears RFLAGS.RF after interception is done. If a fault occurs during the instruction, RFLAGS.RF will be set by a previous patch. This patch does not handle the case of traps/interrupts during rep-strings. Traps are only expected to occur on debug watchpoints, and those are anyhow not handled by the emulator. Signed-off-by:
-
Nadav Amit authored
RFLAGS.RF is always zero after popf. Therefore, popf should not updated RF, as anyhow emulating popf, just as any other instruction should clear RFLAGS.RF. Signed-off-by:
-
Nadav Amit authored
When skipping an emulated instruction, rflags.rf should be cleared as it would be on real x86 CPU. Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-20140715' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next This series enables the "KVM_(S|G)ET_MP_STATE" ioctls on s390 to make the cpu state settable by user space. This is necessary to avoid races in s390 SIGP/reset handling which happen because some SIGPs are handled in QEMU, while others are handled in the kernel. Together with the busy conditions as return value of SIGP races happen especially in areas like starting and stopping of CPUs. (For example, there is a program 'cpuplugd', that runs on several s390 distros which does automatic onlining and offlining on cpus.) As soon as the MPSTATE interface is used, user space takes complete control of the cpu states. Otherwise the kernel will use the old way. Therefore, the new kernel continues to work fine with old QEMUs.
-
Christian Borntraeger authored
IPTE intercept can happen, let's decode that. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com>
-
Cornelia Huck authored
We should advertise all capabilities, including those that can be enabled. Signed-off-by:
-
Cornelia Huck authored
Let's document that this is a capability that may be enabled per-vm. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Cornelia Huck authored
Capabilities can be enabled on a vcpu or (since recently) on a vm. Document this and note for the existing capabilites whether they are per-vcpu or per-vm. Signed-off-by:
-
David Hildenbrand authored
We can get rid of the tasklet used for waking up a VCPU in the hrtimer code but wakeup the VCPU directly. Signed-off-by:
-
David Hildenbrand authored
Let's move the vcpu wakeup code to a central point. We should set the vcpu->preempted flag only if the target is actually sleeping and before the real wakeup happens. Otherwise the preempted flag might be set, when not necessary. This may result in immediate reschedules after schedule() in some scenarios. The wakeup code doesn't require the local_int.lock to be held. Signed-off-by:
-
David Hildenbrand authored
The start_stop_lock is no longer acquired when in atomic context, therefore we can convert it into an ordinary spin_lock. Signed-off-by:
-
David Hildenbrand authored
local_int.lock is not used in a bottom-half handler anymore, therefore we can turn it into an ordinary spin_lock at all occurrences. Signed-off-by:
-
David Hildenbrand authored
This patch cleans up the code in handle_wait by reusing the common code function kvm_vcpu_block. signal_pending(), kvm_cpu_has_pending_timer() and kvm_arch_vcpu_runnable() are sufficient for checking if we need to wake-up that VCPU. kvm_vcpu_block uses these functions, so no checks are lost. The flag "timer_due" can be removed - kvm_cpu_has_pending_timer() tests whether the timer is pending, thus the vcpu is correctly woken up. Signed-off-by:
-
- 17 Jul, 2014 1 commit
-
-
Wanpeng Li authored
This patch fix bug reported in https://bugzilla.kernel.org/show_bug.cgi?id=73331, after the patch http://www.spinics.net/lists/kvm/msg105230.html applied, there is some progress and the L2 can boot up, however, slowly. The original idea of this fix vid injection patch is from "Zhang, Yang Z" <yang.z.zhang@intel.com>. Interrupt which delivered by vid should be injected to L1 by L0 if current is in L1, or should be injected to L2 by L0 through the old injection way if L1 doesn't have set External-interrupt exiting bit. The current logic doen't consider these cases. This patch fix it by vid intr to L1 if current is L1 or L2 through old injection way if L1 doen't have External-interrupt exiting bit set. Signed-off-by:
"Zhang, Yang Z" <yang.z.zhang@intel.com> Signed-off-by:
-
- 11 Jul, 2014 14 commits
-
-
Nadav Amit authored
Certain instructions (e.g., mwait and monitor) cause a #UD exception when they are executed in user mode. This is in contrast to the regular privileged instructions which cause #GP. In order not to mess with SVM interception of mwait and monitor which assumes privilege level assertions take place before interception, a flag has been added. Signed-off-by:
-
Nadav Amit authored
Certain instructions, such as monitor and xsave do not support big real mode and cause a #GP exception if any of the accessed bytes effective address are not within [0, 0xffff]. This patch introduces a flag to mark these instructions, including the necassary checks. Signed-off-by:
-
Paolo Bonzini authored
Emulator accesses are always done a page at a time, either by the emulator itself (for fetches) or because we need to query the MMU for address translations. Speed up these accesses by using kvm_read_guest_page and, in the case of fetches, by inlining kvm_read_guest_virt_helper and dropping the loop around kvm_read_guest_page. This final tweak saves 30-100 more clock cycles (4-10%), bringing the count (as measured by kvm-unit-tests) down to 720-1100 clock cycles on a Sandy Bridge Xeon host, compared to 2300-3200 before the whole series and 925-1700 after the first two low-hanging fruit changes. Signed-off-by: -
Paolo Bonzini authored
When the CS base is not page-aligned, the linear address of the code could get close to the page boundary (e.g. 0x...ffe) even if the EIP value is not. So we need to first linearize the address, and only then compute the number of valid bytes that can be fetched. This happens relatively often when executing real mode code. Signed-off-by: -
Paolo Bonzini authored
This simplifies the code a bit, especially the overflow checks. Signed-off-by: -
Paolo Bonzini authored
We do not need a memory copying loop anymore in insn_fetch; we can use a byte-aligned pointer to access instruction fields directly from the fetch_cache. This eliminates 50-150 cycles (corresponding to a 5-10% improvement in performance) from each instruction. Signed-off-by: -
Paolo Bonzini authored
do_insn_fetch_bytes will only be called once in a given insn_fetch and insn_fetch_arr, because in fact it will only be called at most twice for any instruction and the first call is explicit in x86_decode_insn. This observation lets us hoist the call out of the memory copying loop. It does not buy performance, because most fetches are one byte long anyway, but it prepares for the next patch. The overflow check is tricky, but correct. Because do_insn_fetch_bytes has already been called once, we know that fc->end is at least 15. So it is okay to subtract the number of bytes we want to read. Signed-off-by: -
Paolo Bonzini authored
Hoist the common case up from do_insn_fetch_byte to do_insn_fetch, and prime the fetch_cache in x86_decode_insn. This helps a bit the compiler and the branch predictor, but above all it lays the ground for further changes in the next few patches. Signed-off-by: -
Bandan Das authored
rip_relative is only set if decode_modrm runs, and if you have ModRM you will also have a memopp. We can then access memopp unconditionally. Note that rip_relative cannot be hoisted up to decode_modrm, or you break "mov $0, xyz(%rip)". Also, move typecast on "out of range value" of mem.ea to decode_modrm. Together, all these optimizations save about 50 cycles on each emulated instructions (4-6%). Signed-off-by:
Bandan Das <bsd@redhat.com> [Fix immediate operands with rip-relative addressing. - Paolo] Signed-off-by:
-
Bandan Das authored
x86_decode_insn already sets a default for seg_override, so remove it from the zeroed area. Also replace set/get functions with direct access to the field. Signed-off-by:
-
Bandan Das authored
A lot of initializations are unnecessary as they get set to appropriate values before actually being used. Optimize placement of fields in x86_emulate_ctxt Signed-off-by:
-
Bandan Das authored
Remove the if conditional - that will help us avoid an "else initialize to 0" Also, rearrange operators for slightly better code. Signed-off-by:
-
Bandan Das authored
The same information can be gleaned from ctxt->d and avoids having to zero/NULL initialize intercept and check_perm Signed-off-by:
-
Bandan Das authored
Core emulator functions all belong in emulator.c, x86 should have no knowledge of emulator internals Signed-off-by:
-
