- 29 May, 2023 29 commits
-
-
Sebastian Reichel authored
Add compatible for RK3588 OHCI. As far as I know it's fully compatible with generic-ohci. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230522162937.53190-2-sebastian.reichel@collabora.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shenwei Wang authored
The current implementation uses the same callbacks for system PM and runtime PM suspend/resume without any state checking. This can cause the clocks to be prepared/unprepared twice, leading to kernel warning issues. This patch resolves the double prepare/unprepare issues by separating the runtime PM and system PM handling. Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by:
Frank Li <frank.li@nxp.com> Link: https://lore.kernel.org/r/20230523184412.204582-1-shenwei.wang@nxp.comSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20230518202636.273407-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. While touching hd3ss3220.c fix a minor white space issue in the definition of struct hd3ss3220_driver. Signed-off-by:
-
Frank Li authored
Previously, the entire length of the request, which is equal to or greater than the actual data, was dma synced and memcpy when using the bounce buffer. Actually only the actual data indicated by request->actual need be synced and copied. Signed-off-by:
-
Frank Li authored
When the address of a request was not aligned with an 8-byte boundary, the USB DMA was unable to process it, necessitating the use of an internal bounce buffer. In these cases, the request->buf had to be copied to/from this bounce buffer. However, if this unaligned address scenario arises, it is unnecessary to perform heavy cache maintenance operations like usb_gadget_map(unmap)_request_by_dev() on the request->buf, as the DMA does not utilize it at all. it can be skipped at this case. iperf3 tests on the rndis case: Transmit speed (TX): Improved from 299Mbps to 440Mbps Receive speed (RX): Improved from 290Mbps to 500Mbps Signed-off-by:
-
Minda Chen authored
Adds Specific Glue layer to support USB peripherals on StarFive JH7110 SoC. There is a Cadence USB3 core for JH7110 SoCs, the cdns core is the child of this USB wrapper module device. Signed-off-by:
Minda Chen <minda.chen@starfivetech.com> Acked-by:
Peter Chen <peter.chen@kernel.org> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230518112750.57924-7-minda.chen@starfivetech.comSigned-off-by:
-
Frank Li authored
NXP imx8qm integrates 1 cdns3 IP. This is glue layer device bindings. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230517152545.3404508-2-Frank.Li@nxp.comSigned-off-by:
-
Frank Li authored
Simplifies the clock names in imx_cdns3_core_clks[]. Such as, renaming "usb3_lpm_clk" to "lpm". The "usb3" prefix and "clk" suffix were redundant. Signed-off-by:
-
Xu Yang authored
Remove one duplicated definition of MX7D_USB_OTG_PHY_CFG1. Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230517081907.3410465-1-xu.yang_2@nxp.comSigned-off-by:
-
Arnd Bergmann authored
The declaration is in an #ifdef, which causes warnings when building with 'make W=1' and without CONFIG_PM: drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend' drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume' Use the same #ifdef check around the function definitions to avoid the warnings and slightly shrink the USB core. Fixes: 7794f486 ("usbfs: Add ioctls for runtime power management") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.orgSigned-off-by:
-
Li Yang authored
Smatch reports: drivers/usb/phy/phy-tahvo.c: tahvo_usb_probe() warn: missing unwind goto? After geting irq, if ret < 0, it will return without error handling to free memory. Just add error handling to fix this problem. Fixes: 0d45a137 ("usb: phy: tahvo: add IRQ check") Signed-off-by:
Li Yang <lidaxian@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230420140832.9110-1-lidaxian@hust.edu.cnSigned-off-by:
-
Krzysztof Kozlowski authored
The "swap-dx-lanes" was never described as uint8 in original TXT bindings and Linux driver expects uint32. Fix the type to match Linux driver expectation. Fixes: fff61d4c ("dt-bindings: usb: usb251xb: Convert to YAML schema") Signed-off-by:
Marek Vasut <marex@denx.de> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Richard Leitner <richard.leitner@linux.dev> Link: https://lore.kernel.org/r/20230516083432.18579-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Niklas Schnelle authored
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to guard sections of code calling them as alternative access methods with CONFIG_HAS_IOPORT checks. For uhci-hcd there are a lot of I/O port uses that do have MMIO alternatives all selected by uhci_has_pci_registers() so this can be handled by UHCI_IN/OUT macros and making uhci_has_pci_registers() constant 0 if CONFIG_HAS_IOPORT is unset. Co-developed-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by:
-
Niklas Schnelle authored
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by:
-
Avichal Rakesh authored
ISOC transfers expect a certain cadence of requests being queued. Not keeping up with the expected rate of requests results in missed ISOC transfers (EXDEV). The application layer may or may not produce video frames to match this expectation, so uvc gadget driver must handle cases where the application is not queuing up buffers fast enough to fulfill ISOC requirements. Currently, uvc gadget driver waits for new video buffer to become available before queuing up usb requests. With this patch the gadget driver queues up 0 length usb requests whenever there are no video buffers available. The USB controller's complete callback is used as the limiter for how quickly the 0 length packets will be queued. Video buffers are still queued as soon as they become available. Link: https://lore.kernel.org/CAMHf4WKbi6KBPQztj9FA4kPvESc1fVKrC8G73-cs6tTeQby9=w@mail.gmail.com/Signed-off-by:
Avichal Rakesh <arakesh@google.com> Link: https://lore.kernel.org/r/20230508231103.1621375-1-arakesh@google.comSigned-off-by:
-
Prashanth K authored
When serial console over USB is enabled, gs_console_connect queues gs_console_work, where it acquires the spinlock and queues the usb request, and this request goes to gadget layer. Now consider a situation where gadget layer prints something to dmesg, this will eventually call gs_console_write() which requires cons->lock. And this causes spinlock recursion. Avoid this by excluding usb_ep_queue from the spinlock. spin_lock_irqsave //needs cons->lock gs_console_write . . _printk __warn_printk dev_warn/pr_err . . [USB Gadget Layer] . . usb_ep_queue gs_console_work __gs_console_push // acquires cons->lock process_one_work Signed-off-by:
Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/1683638872-6885-1-git-send-email-quic_prashk@quicinc.comSigned-off-by:
-
Prashanth K authored
Consider a case where gserial_disconnect has already cleared gser->ioport. And if gserial_suspend gets called afterwards, it will lead to accessing of gser->ioport and thus causing null pointer dereference. Avoid this by adding a null pointer check. Added a static spinlock to prevent gser->ioport from becoming null after the newly added null pointer check. Fixes: aba3a8d0 ("usb: gadget: u_serial: add suspend resume callbacks") Signed-off-by:
-
Bryan O'Donoghue authored
orientation-switch it the standard declaration to inform the Type-C mux layer that a remote-endpoint is capable of processing orientation change messages. Add as an optional since not all versions of the dp-phy currently support the orientation-switch. Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230515133643.3621656-4-bryan.odonoghue@linaro.orgSigned-off-by:
-
Bryan O'Donoghue authored
The VBUS driver needs to know the regulator-min-microamp and regulator-max-microamp so they should both be marked as required. regulator.yaml defines those two dependencies so include regulator.yaml. We need to change from additionalProperties: false to unevaluatedProperties: false. Reviewed-by:
-
Bryan O'Donoghue authored
The regulator code needs to know the location of the register to write to to switch on/off. Right now we have a driver that does this, a yaml that partially describes it and no dts that uses it. Switching on the VBUS for sm8250 shows that we haven't documented reg as a required property, do so now. Acked-by:
-
Heikki Krogerus authored
The alt mode descriptor parameters are not used anymore. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Tested-by:
Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20230526131434.46920-3-heikki.krogerus@linux.intel.comSigned-off-by:
-
Heikki Krogerus authored
Removing the "svid" and "accessory" device property checks. Those properties are not supported on any platform. Signed-off-by:
-
Min-Hua Chen authored
hdr->opcode is __le32 type, use le32_to_cpu() to cast opcode to integer in the switch..case statement to fix the following sparse warnings: drivers/usb/typec/ucsi/ucsi_glink.c:248:20: sparse: warning: restricted __le32 degrades to integer drivers/usb/typec/ucsi/ucsi_glink.c:248:20: sparse: warning: restricted __le32 degrades to integer drivers/usb/typec/ucsi/ucsi_glink.c:248:20: sparse: warning: restricted __le32 degrades to integer No functional change. Signed-off-by:
Min-Hua Chen <minhuadotchen@gmail.com> Reviewed-by:
-
Mario Limonciello authored
power_supply_is_system_supplied() checks whether any power supplies are present that aren't batteries to decide whether the system is running on DC or AC. Downstream drivers use this to make performance decisions. Navi dGPUs include an UCSI function that has been exported since commit 17631e8c ("i2c: designware: Add driver support for AMD NAVI GPU"). This UCSI function registers a power supply since commit 992a60ed ("usb: typec: ucsi: register with power_supply class") but this is not a system power supply. As the power supply for a dGPU is only for powering devices connected to dGPU, create a device property to indicate that the UCSI endpoint is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`. Link: https://lore.kernel.org/lkml/20230516182541.5836-2-mario.limonciello@amd.com/Reviewed-by:
Evan Quan <evan.quan@amd.com> Tested-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
-
Vladislav Efanov authored
Function dwc3_qcom_probe() allocates memory for resource structure which is pointed by parent_res pointer. This memory is not freed. This leads to memory leak. Use stack memory to prevent memory leak. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2bc02355 ("usb: dwc3: qcom: Add support for booting with ACPI") Signed-off-by:
Vladislav Efanov <VEfanov@ispras.ru> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20230517172518.442591-1-VEfanov@ispras.ruSigned-off-by:
-
Tom Rix authored
smatch reports drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c:323:29: warning: symbol 'pm8150b_typec_res' was not declared. Should it be static? This variable is only used in its defining file, so it should be static Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Uwe Kleine-König authored
_FORTIFY_SOURCE=2 uses more and stricter checks. This is what e.g. Debian recommends to build packages with. While at it fix a typo in the output of ./configure --help. Signed-off-by:
Uwe Kleine-König <ukleinek@debian.org> Reviewed-By:
Hongren Zheng <i@zenithal.me> Link: https://lore.kernel.org/r/20230503173622.1072787-1-ukleinek@debian.orgSigned-off-by:
-
Galen Guyer authored
Suggest loading vhdi_hcd if it's not loaded to make error message less opaque Signed-off-by:
Galen Guyer <galen@galenguyer.com> Reviewed-By:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20230508212120.435329-1-galen@galenguyer.comSigned-off-by:
-
- 28 May, 2023 11 commits
-
-
Roger Quadros authored
The merge of 6.4-rc4 got the changes in drivers/usb/dwc3/gadget.c completely incorrect, so fix it up properly. Link: https://lore.kernel.org/r/f604f836-7858-6140-4ec1-9ba95cba6991@kernel.org Fixes: 7e530d32 ("Merge 6.4-rc4 into usb-next") Signed-off-by:
-
Greg Kroah-Hartman authored
We need the USB fixes in here and this resolves merge conflicts in: drivers/usb/dwc3/gadget.c drivers/usb/gadget/udc/core.c Signed-off-by: -
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cpu fix from Thomas Gleixner: "A single fix for x86: - Prevent a bogus setting for the number of HT siblings, which is caused by the CPUID evaluation trainwreck of X86. That recomputes the value for each CPU, so the last CPU "wins". That can cause completely bogus sibling values" * tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms -
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
