Clean up: de-duplicate some common code.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Micro-optimization: Call ktime_get() only when ->xpo_recvfrom() has
given us a full RPC message to process. rq_stime isn't used
otherwise, so this avoids pointless work.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Now that we have bulk page allocation and release APIs, it's more
efficient to use those than it is for nfsd threads to wait for send
completions. Previous patches have eliminated the calls to
wait_for_completion() and complete(), in order to avoid scheduler
overhead.

Now release pages-under-I/O in the send completion handler using
the efficient bulk release API.

I've measured a 7% reduction in cumulative CPU utilization in
svc_rdma_sendto(), svc_rdma_wc_send(), and svc_xprt_release(). In
particular, using release_pages() instead of complete() cuts the
time per svc_rdma_wc_send() call by two-thirds. This helps improve
scalability because svc_rdma_wc_send() is single-threaded per
connection.
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

I noticed that svc_rqst_release_pages() was still unnecessarily
releasing a page when svc_rdma_recvfrom() returns zero.

Fixes: a53d5cb0 ("svcrdma: Avoid releasing a page in svc_xprt_release()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Get rid of the completion wait in svc_rdma_sendto(), and release
pages in the send completion handler again. A subsequent patch will
handle releasing those pages more efficiently.

Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Modified nfsd4_encode_open to encode the op_recall flag properly
for OPEN result with write delegation granted.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org

At LFS 2023, it was suggested we should publicly document the name and
email of reviewers who new contributors can trust. This also gives them
some recognition for their work as reviewers.
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Ensure that Bruce's old e-mail addresses map to his current one so
he doesn't miss out on all the fun.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The physical device's favored NUMA node ID is available when
allocating a rw_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The physical device's favored NUMA node ID is available when
allocating a send_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The physical device's favored NUMA node ID is available when
allocating a recv_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.

This clean up eliminates the hack of destroying recv_ctxts that
were not created by the receive CQ thread -- recv_ctxts are now
always allocated on a "good" node.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The physical device's NUMA node ID is available when allocating an
svc_xprt for an incoming connection. Use that value to ensure the
svc_xprt structure is allocated on the NUMA node closest to the
device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The below-mentioned patch was intended to simplify refcounting on the
svc_serv used by locked.  The goal was to only ever have a single
reference from the single thread.  To that end we dropped a call to
lockd_start_svc() (except when creating thread) which would take a
reference, and dropped the svc_put(serv) that would drop that reference.

Unfortunately we didn't also remove the svc_get() from
lockd_create_svc() in the case where the svc_serv already existed.
So after the patch:
 - on the first call the svc_serv was allocated and the one reference
   was given to the thread, so there are no extra references
 - on subsequent calls svc_get() was called so there is now an extra
   reference.
This is clearly not consistent.

The inconsistency is also clear in the current code in lockd_get()
takes *two* references, one on nlmsvc_serv and one by incrementing
nlmsvc_users.   This clearly does not match lockd_put().

So: drop that svc_get() from lockd_get() (which used to be in
lockd_create_svc().
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/linux-nfs/ZHsI%2FH16VX9kJQX1@shredder/T/#u
Fixes: b73a2972 ("lockd: move lockd_start_svc() call into lockd_create_svc()")
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

nfsd calls fh_getattr to get the latest inode attrs for pre/post-op
info. In the event that fh_getattr fails, it resorts to scraping cached
values out of the inode directly.

Since these attributes are optional, we can just skip providing them
altogether when this happens.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Neil Brown <neilb@suse.de>

nfsd_readv()'s consumers now use nfsd_iter_read().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Now that the preparation of an rq_vec has been removed from the
generic read path, nfsd_splice_read() no longer needs to reset
rq_next_page.

nfsd4_encode_read() calls nfsd_splice_read() directly. As far as I
can ascertain, resetting rq_next_page for NFSv4 splice reads is
unnecessary because rq_next_page is already set correctly.

Moreover, resetting it might even be incorrect if previous
operations in the COMPOUND have already consumed at least a page of
the send buffer. I would expect that the result would be encoding
the READ payload over previously-encoded results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Accrue the following benefits:

a) Deduplicate this common bit of code.

b) Don't prepare rq_vec for NFSv2 and NFSv3 spliced reads, which
   don't use rq_vec. This is already the case for
   nfsd4_encode_read().

c) Eventually, converting NFSD's read path to use a bvec iterator
   will be simpler.

In the next patch, nfsd_iter_read() will replace nfsd_readv() for
all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

A GETATTR with a large result can advance xdr->page_ptr without
updating rq_next_page. If a splice READ follows that GETATTR in the
COMPOUND, nfsd_splice_actor can start splicing at the wrong page.

I've also seen READLINK and READDIR leave rq_next_page in an
unmodified state.

There are potentially a myriad of combinations like this, so play it
safe: move the rq_next_page update to nfsd4_encode_operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Commit 15b23ef5 ("nfsd4: fix corruption of NFSv4 read data")
encountered exactly the same issue: after a splice read, a
filesystem-owned page is left in rq_pages[]; the symptoms are the
same as described there.

If the computed number of pages in nfsd4_encode_splice_read() is not
exactly the same as the actual number of pages that were consumed by
nfsd_splice_actor() (say, because of a bug) then hilarity ensues.

Instead of recomputing the page offset based on the size of the
payload, use rq_next_page, which is already properly updated by
nfsd_splice_actor(), to cause svc_rqst_release_pages() to operate
correctly in every instance.

This is a defensive change since we believe that after commit
27c934dd ("nfsd: don't replace page in rq_pages if it's a
continuation of last page") has been applied, there are no known
opportunities for nfsd_splice_actor() to screw up. So I'm not
marking it for stable backport.
Reported-by: Andy Zlotek <andy.zlotek@oracle.com>
Suggested-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

All other NFSv[23] procedures manage to keep page_ptr and
rq_next_page in lock step.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

De-duplicate "reserve_space; encode_cinfo".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Deduplicate some common code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Clean up: Use the bulk page allocator when filling a server thread's
buffer page array.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

svc_init_buffer() is careful to allocate the initial set of server
thread buffer pages from memory on the local NUMA node.
svc_alloc_arg() should also be that careful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Add trace log eye-catchers that record the arguments used to
configure NFSD. This helps when troubleshooting the NFSD
administrative interfaces.

These tracepoints can capture NFSD start-up and shutdown times and
parameters, changes in lease time and thread count, and a request
to end the namespace's NFSv4 grace period, in addition to the set
of NFS versions that are enabled.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

For easier readability, follow the common convention:

    if (error)
	handle_error;
    continue_normally;

No behavior change is expected.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Capture a timestamp and pointer address during the creation and
destruction of struct svc_sock to record its lifetime. This helps
to diagnose transport reference counting issues.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The -ENOMEM arm could fire repeatedly if the system runs low on
memory, so remove it.

Don't bother to trace -EAGAIN error events, since those fire after
a listener is created (with no work done) and once again after an
accept has been handled successfully (again, with no work done).
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

When enabled, this dprintk() fires for every incoming RPC, which is
an enormous amount of log traffic. These days, after the first few
hundred log messages, the system journald is just going to mute it,
along with all other NFSD debug output.

Let's rely on trace points for this high-traffic information
instead.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The correct function name is svc_tcp_listen_data_ready().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

After the listener svc_sock is freed, and before invoking svc_tcp_accept()
for the established child sock, there is a window that the newsock
retaining a freed listener svc_sock in sk_user_data which cloning from
parent. In the race window, if data is received on the newsock, we will
observe use-after-free report in svc_tcp_listen_data_ready().

Reproduce by two tasks:

1. while :; do rpc.nfsd 0 ; rpc.nfsd; done
2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done

KASAN report:

  ==================================================================
  BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
  Read of size 8 at addr ffff888139d96228 by task nc/102553
  CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
  Call Trace:
   <IRQ>
   dump_stack_lvl+0x33/0x50
   print_address_description.constprop.0+0x27/0x310
   print_report+0x3e/0x70
   kasan_report+0xae/0xe0
   svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
   tcp_data_queue+0x9f4/0x20e0
   tcp_rcv_established+0x666/0x1f60
   tcp_v4_do_rcv+0x51c/0x850
   tcp_v4_rcv+0x23fc/0x2e80
   ip_protocol_deliver_rcu+0x62/0x300
   ip_local_deliver_finish+0x267/0x350
   ip_local_deliver+0x18b/0x2d0
   ip_rcv+0x2fb/0x370
   __netif_receive_skb_one_core+0x166/0x1b0
   process_backlog+0x24c/0x5e0
   __napi_poll+0xa2/0x500
   net_rx_action+0x854/0xc90
   __do_softirq+0x1bb/0x5de
   do_softirq+0xcb/0x100
   </IRQ>
   <TASK>
   ...
   </TASK>

  Allocated by task 102371:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   __kasan_kmalloc+0x7b/0x90
   svc_setup_socket+0x52/0x4f0 [sunrpc]
   svc_addsock+0x20d/0x400 [sunrpc]
   __write_ports_addfd+0x209/0x390 [nfsd]
   write_ports+0x239/0x2c0 [nfsd]
   nfsctl_transaction_write+0xac/0x110 [nfsd]
   vfs_write+0x1c3/0xae0
   ksys_write+0xed/0x1c0
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

  Freed by task 102551:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   kasan_save_free_info+0x2a/0x50
   __kasan_slab_free+0x106/0x190
   __kmem_cache_free+0x133/0x270
   svc_xprt_free+0x1e2/0x350 [sunrpc]
   svc_xprt_destroy_all+0x25a/0x440 [sunrpc]
   nfsd_put+0x125/0x240 [nfsd]
   nfsd_svc+0x2cb/0x3c0 [nfsd]
   write_threads+0x1ac/0x2a0 [nfsd]
   nfsctl_transaction_write+0xac/0x110 [nfsd]
   vfs_write+0x1c3/0xae0
   ksys_write+0xed/0x1c0
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready()
if state != TCP_LISTEN, that will avoid dereferencing svsk for all
child socket.

Link: https://lore.kernel.org/lkml/20230507091131.23540-1-dinghui@sangfor.com.cn/
Fixes: fa9251af ("SUNRPC: Call the default socket callbacks instead of open coding")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

We've aligned setgid behavior over multiple kernel releases. The details
can be found in commit cf619f89 ("Merge tag 'fs.ovl.setgid.v6.2' of
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping") and
commit 426b4ca2 ("Merge tag 'fs.setgid.v6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux").
Consistent setgid stripping behavior is now encapsulated in the
setattr_should_drop_sgid() helper which is used by all filesystems that
strip setgid bits outside of vfs proper. Usually ATTR_KILL_SGID is
raised in e.g., chown_common() and is subject to the
setattr_should_drop_sgid() check to determine whether the setgid bit can
be retained. Since nfsd is raising ATTR_KILL_SGID unconditionally it
will cause notify_change() to strip it even if the caller had the
necessary privileges to retain it. Ensure that nfsd only raises
ATR_KILL_SGID if the caller lacks the necessary privileges to retain the
setgid bit.

Without this patch the setgid stripping tests in LTP will fail:

> As you can see, the problem is S_ISGID (0002000) was dropped on a
> non-group-executable file while chown was invoked by super-user, while

[...]

> fchown02.c:66: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700

[...]

> chown02.c:57: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700

With this patch all tests pass.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Pull irq fix from Borislav Petkov:

 - Fix open firmware quirks validation so that they don't get applied
   wrongly

* tag 'irq_urgent_for_v6.4_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Correctly validate OF quirk descriptors

Pull media fixes from Mauro Carvalho Chehab:
 "Some driver fixes:
   - a regression fix for the verisilicon driver
   - uvcvideo: don't expose unsupported video formats to userspace
   - camss-video: don't zero subdev format after init
   - mediatek: some fixes for 4K decoder formats
   - fix a Sphinx build warning (missing doc for client_caps)
   - some fixes for imx and atomisp staging drivers

  And two CEC core fixes:
   - don't set last_initiator if TX in progress
   - disable adapter in cec_devnode_unregister"

* tag 'media/v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: uvcvideo: Don't expose unsupported formats to userspace
  media: v4l2-subdev: Fix missing kerneldoc for client_caps
  media: staging: media: imx: initialize hs_settle to avoid warning
  media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
  media: staging: media: atomisp: init high & low vars
  media: cec: core: don't set last_initiator if tx in progress
  media: cec: core: disable adapter in cec_devnode_unregister
  media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats
  media: camss: camss-video: Don't zero subdev format again after initialization
  media: verisilicon: Additional fix for the crash when opening the driver

Pull char/misc driver fixes from Greg KH:
 "Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that
  resolve a number of reported issues. Included in here are:

   - iio driver fixes

   - fpga driver fixes

   - test_firmware bugfixes

   - fastrpc driver tiny bugfixes

   - MAINTAINERS file updates for some subsystems

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (34 commits)
  test_firmware: fix the memory leak of the allocated firmware buffer
  test_firmware: fix a memory leak with reqs buffer
  test_firmware: prevent race conditions by a correct implementation of locking
  firmware_loader: Fix a NULL vs IS_ERR() check
  MAINTAINERS: Vaibhav Gupta is the new ipack maintainer
  dt-bindings: fpga: replace Ivan Bornyakov maintainership
  MAINTAINERS: update Microchip MPF FPGA reviewers
  misc: fastrpc: reject new invocations during device removal
  misc: fastrpc: return -EPIPE to invocations on device removal
  misc: fastrpc: Reassign memory ownership only for remote heap
  misc: fastrpc: Pass proper scm arguments for secure map request
  iio: imu: inv_icm42600: fix timestamp reset
  iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
  iio: dac: mcp4725: Fix i2c_master_send() return value handling
  iio: accel: kx022a fix irq getting
  iio: bu27034: Ensure reset is written
  iio: dac: build ad5758 driver when AD5758 is selected
  iio: addac: ad74413: fix resistance input processing
  iio: light: vcnl4035: fixed chip ID check
  ...

Pull driver core fixes from Greg KH:
 "Here are two small driver core cacheinfo fixes for 6.4-rc5 that
  resolve a number of reported issues with that file. These changes have
  been in linux-next this past week with no reported problems"

* tag 'driver-core-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: base: cacheinfo: Update cpu_map_populated during CPU Hotplug
  drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug