I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.

This is a reprise of commit 90fda63f ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).

So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c9 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c439937 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fuse ACL fix from Christian Brauner:
 "The new posix acl API doesn't depend on the xattr handler
  infrastructure anymore and instead only relies on the posix acl inode
  operations. As a result daemons without FUSE_POSIX_ACL are unable to
  use posix acls like they used to.

  Fix this by copying what we did for overlayfs during the posix acl api
  conversion. Make fuse implement a dedicated ->get_inode_acl() method
  as does overlayfs. Fuse can then also uses this to express different
  needs for vfs permission checking during lookup and acl based
  retrieval via the regular system call path.

  This allows fuse to continue to refuse retrieving posix acls for
  daemons that don't set FUSE_POSXI_ACL for permission checking while
  also allowing a fuse server to retrieve it via the usual system calls"

* tag 'fs.fuse.acl.v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fuse: fixes after adapting to new posix acl api

Pull module fix from Luis Chamberlain:
 "Theis is a fix we have been delaying for v6.2 due to lack of early
  testing on linux-next.

  The commit has been sitting in linux-next since December and testing
  has also been now a bit extensive by a few developers. Since this is a
  fix which definitely will go to v6.3 it should also apply to v6.2 so
  if there are any issues we pick them up earlier rather than later. The
  fix fixes a regression since v5.3, prior to me helping with module
  maintenance, however, the issue is real in that in the worst case now
  can prevent boot.

  We've discussed all possible corner cases [0] and at last do feel this
  is ready for v6.2-rc6"

Link https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/ [0]

* tag 'modules-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: Don't wait for GOING modules

Pull rust fix from Miguel Ojeda:

 - Avoid evaluating arguments in 'pr_*' macros in 'unsafe' blocks

* tag 'rust-fixes-6.2' of https://github.com/Rust-for-Linux/linux:
  rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocks

Pull kvm fixes from Paolo Bonzini:
 "ARM64:

   - Pass the correct address to mte_clear_page_tags() on initialising a
     tagged page

   - Plug a race against a GICv4.1 doorbell interrupt while saving the
     vgic-v3 pending state.

  x86:

   - A command line parsing fix and a clang compilation fix for
     selftests

   - A fix for a longstanding VMX issue, that surprisingly was only
     found now to affect real world guests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Make reclaim_period_ms input always be positive
  KVM: x86/vmx: Do not skip segment attributes if unusable bit is set
  selftests: kvm: move declaration at the beginning of main()
  KVM: arm64: GICv4.1: Fix race with doorbell on VPE activation/deactivation
  KVM: arm64: Pass the actual page address to mte_clear_page_tags()

Pull SCSI fixes from James Bottomley:
 "Six fixes, all in drivers.

  The biggest are the UFS devfreq fixes which address a lock inversion
  and the two iscsi_tcp fixes which try to prevent a use after free from
  userspace still accessing an area which the kernel has released (seen
  by KASAN)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: device_handler: alua: Remove a might_sleep() annotation
  scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
  scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
  scsi: ufs: core: Fix devfreq deadlocks
  scsi: hpsa: Fix allocation size for scsi_host_alloc()
  scsi: target: core: Fix warning on RT kernels

Pull nfsd fix from Chuck Lever:

 - Nail another UAF in NFSD's filecache

* tag 'nfsd-6.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: don't free files unconditionally in __nfsd_file_cache_purge

Pull fscrypt MAINTAINERS entry update from Eric Biggers:
 "Update the MAINTAINERS file entry for fscrypt"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  MAINTAINERS: update fscrypt git repo

During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.

Since commit 6e6de3de ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.

This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.

This patch attempts a different solution for the problem 6e6de3de
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3de (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.

This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.

[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/

Fixes: 6e6de3de ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek <pmladek@suse.com>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull fsverity MAINTAINERS entry update from Eric Biggers:
 "Update the MAINTAINERS file entry for fsverity"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  MAINTAINERS: update fsverity git repo, list, and patchwork

Commit f3bbac32 ("ext4: deal with legacy signed xattr name hash
values") added a hashing function for the legacy case of having the
xattr hash calculated using a signed 'char' type.  It left the unsigned
case alone, since it's all implicitly handled by the '-funsigned-char'
compiler option.

However, there's been some noise about back-porting it all into stable
kernels that lack the '-funsigned-char', so let's just make that at
least possible by making the whole 'this uses unsigned char' very
explicit in the code itself.  Whether such a back-port is really
warranted or not, I'll leave to others, but at least together with this
change it is technically sensible.

Also, add a 'pr_warn_once()' for reporting the "hey, signedness for this
hash calculation has changed" issue.  Hopefully it never triggers except
for that xfstests generic/454 test-case, but even if it does it's just
good information to have.

If for no other reason than "we can remove the legacy signed hash code
entirely if nobody ever sees the message any more".

Cc: Sasha Levin <sashal@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This cycle we ported all filesystems to the new posix acl api. While
looking at further simplifications in this area to remove the last
remnants of the generic dummy posix acl handlers we realized that we
regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use
of posix acls.

With the change to a dedicated posix acl api interacting with posix acls
doesn't go through the old xattr codepaths anymore and instead only
relies the get acl and set acl inode operations.

Before this change fuse daemons that don't set FUSE_POSIX_ACL were able
to get and set posix acl albeit with two caveats. First, that posix acls
aren't cached. And second, that they aren't used for permission checking
in the vfs.

We regressed that use-case as we currently refuse to retrieve any posix
acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons
would see a change in behavior.

We can restore the old behavior in multiple ways. We could change the
new posix acl api and look for a dedicated xattr handler and if we find
one prefer that over the dedicated posix acl api. That would break the
consistency of the new posix acl api so we would very much prefer not to
do that.

We could introduce a new ACL_*_CACHE sentinel that would instruct the
vfs permission checking codepath to not call into the filesystem and
ignore acls.

But a more straightforward fix for v6.2 is to do the same thing that
Overlayfs does and give fuse a separate get acl method for permission
checking. Overlayfs uses this to express different needs for vfs
permission lookup and acl based retrieval via the regular system call
path as well. Let fuse do the same for now. This way fuse can continue
to refuse to retrieve posix acls for daemons that don't set
FUSE_POSXI_ACL for permission checking while allowing a fuse server to
retrieve it via the usual system calls.

In the future, we could extend the get acl inode operation to not just
pass a simple boolean to indicate rcu lookup but instead make it a flag
argument. Then in addition to passing the information that this is an
rcu lookup to the filesystem we could also introduce a flag that tells
the filesystem that this is a request from the vfs to use these acls for
permission checking. Then fuse could refuse the get acl request for
permission checking when the daemon doesn't have FUSE_POSIX_ACL set in
the same get acl method. This would also help Overlayfs and allow us to
remove the second method for it as well.

But since that change is more invasive as we need to update the get acl
inode operation for multiple filesystems we should not do this as a fix
for v6.2. Instead we will do this for the v6.3 merge window.

Fwiw, since posix acls are now always correctly translated in the new
posix acl api we could also allow them to be used for daemons without
FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral
change and again if dones should be done for v6.3. For now, let's just
restore the original behavior.

A nice side-effect of this change is that for fuse daemons with and
without FUSE_POSIX_ACL the same code is used for posix acls in a
backwards compatible way. This also means we can remove the legacy xattr
handlers completely. We've also added comments to explain the expected
behavior for daemons without FUSE_POSIX_ACL into the code.

Fixes: 318e6685 ("xattr: use posix acl api")
Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

Pull VFIO fixes from Alex Williamson:

 - Honor reserved regions when testing for IOMMU find grained super page
   support, avoiding a regression on s390 for a firmware device where
   the existence of the mapping, even if unused can trigger an error
   state. (Niklas Schnelle)

 - Fix a deadlock in releasing KVM references by using the alternate
   .release() rather than .destroy() callback for the kvm-vfio device.
   (Yi Liu)

* tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio:
  kvm/vfio: Fix potential deadlock on vfio group_lock
  vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()

Pull EFI fixes from Ard Biesheuvel:
 "Another couple of EFI fixes, of which the first two were already in
  -next when I sent out the previous PR, but they caused some issues on
  non-EFI boots so I let them simmer for a bit longer.

   - ensure the EFI ResetSystem and ACPI PRM calls are recognized as
     users of the EFI runtime, and therefore protected against
     exceptions

   - account for the EFI runtime stack in the stacktrace code

   - remove Matthew Garrett's MAINTAINERS entry for efivarfs"

* tag 'efi-fixes-for-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Remove Matthew Garrett as efivarfs maintainer
  arm64: efi: Account for the EFI runtime stack in stack unwinder
  arm64: efi: Avoid workqueue to check whether EFI runtime is live

nfsd_file_cache_purge is called when the server is shutting down, in
which case, tearing things down is generally fine, but it also gets
called when the exports cache is flushed.

Instead of walking the cache and freeing everything unconditionally,
handle it the same as when we have a notification of conflicting access.

Fixes: ac3a2585 ("nfsd: rework refcounting in filecache")
Reported-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-by: Torkil Svensgaard <torkil@drcmr.dk>
Reported-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Pull scheduler fixes from Borislav Petkov:

 - Make sure the scheduler doesn't use stale frequency scaling values
   when latter get disabled due to a value error

 - Fix a NULL pointer access on UP configs

 - Use the proper locking when updating CPU capacity

* tag 'sched_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency invariance readings
  sched/core: Fix NULL pointer access fault in sched_setaffinity() with non-SMP configs
  sched/fair: Fixes for capacity inversion detection
  sched/uclamp: Fix a uninitialized variable warnings

Pull EDAC fixes from Borislav Petkov:

 - Respect user-supplied polling value in the EDAC device code

 - Fix a use-after-free issue in qcom_edac

* tag 'edac_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
  EDAC/device: Respect any driver-supplied workqueue polling value

Pull perf fix from Borislav Petkov:

 - Add Emerald Rapids model support to more perf machinery

* tag 'perf_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/cstate: Add Emerald Rapids
  perf/x86/intel: Add Emerald Rapids

Pull gfs2 writepage fix from Andreas Gruenbacher:

 - Fix a regression introduced by commit "gfs2: stop using
   generic_writepages in gfs2_ail1_start_one".

* tag 'gfs2-v6.2-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"

reclaim_period_ms used to be positive only but the commit 0001725d
("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input
validation") incorrectly changed it to non-negative validation.

Change validation to allow only positive input.

Fixes: 0001725d ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reported-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230111183408.104491-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When serializing and deserializing kvm_sregs, attributes of the segment
descriptors are stored by user space. For unusable segments,
vmx_segment_access_rights skips all attributes and sets them to 0.

This means we zero out the DPL (Descriptor Privilege Level) for unusable
entries.

Unusable segments are - contrary to their name - usable in 64bit mode and
are used by guests to for example create a linear map through the
NULL selector.

VMENTER checks if SS.DPL is correct depending on the CS segment type.
For types 9 (Execute Only) and 11 (Execute Read), CS.DPL must be equal to
SS.DPL [1].

We have seen real world guests setting CS to a usable segment with DPL=3
and SS to an unusable segment with DPL=3. Once we go through an sregs
get/set cycle, SS.DPL turns to 0. This causes the virtual machine to crash
reproducibly.

This commit changes the attribute logic to always preserve attributes for
unusable segments. According to [2] SS.DPL is always saved on VM exits,
regardless of the unusable bit so user space applications should have saved
the information on serialization correctly.

[3] specifies that besides SS.DPL the rest of the attributes of the
descriptors are undefined after VM entry if unusable bit is set. So, there
should be no harm in setting them all to the previous state.

[1] Intel SDM Vol 3C 26.3.1.2 Checks on Guest Segment Registers
[2] Intel SDM Vol 3C 27.3.2 Saving Segment Registers and Descriptor-Table
Registers
[3] Intel SDM Vol 3C 26.3.2.2 Loading Guest Segment Registers and
Descriptor-Table Registers

Cc: Alexander Graf <graf@amazon.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221114164823.69555-1-hborghor@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Placing a declaration of evt_reset is pedantically invalid
according to the C standard.  While GCC does not really care
and only warns with -Wpedantic, clang ignores the declaration
altogether with an error:

x86_64/xen_shinfo_test.c:965:2: error: expected expression
        struct kvm_xen_hvm_attr evt_reset = {
        ^
x86_64/xen_shinfo_test.c:969:38: error: use of undeclared identifier evt_reset
        vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &evt_reset);
                                            ^
Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: a79b53aa ("KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET", 2022-12-28)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit b2b0a5e9 switched from generic_writepages() to
filemap_fdatawrite_wbc() in gfs2_ail1_start_one() on the path to
replacing ->writepage() with ->writepages() and eventually eliminating
the former.  Function gfs2_ail1_start_one() is called from
gfs2_log_flush(), our main function for flushing the filesystem log.

Unfortunately, at least as implemented today, ->writepage() and
->writepages() are entirely different operations for journaled data
inodes: while the former creates and submits transactions covering the
data to be written, the latter flushes dirty buffers out to disk.

With gfs2_ail1_start_one() now calling ->writepages(), we end up
creating filesystem transactions while we are in the course of a log
flush, which immediately deadlocks on the sdp->sd_log_flush_lock
semaphore.

Work around that by going back to how things used to work before commit
b2b0a5e9 for now; figuring out a superior solution will take time we
don't have available right now.  However ...

Since the removal of generic_writepages() is imminent, open-code it
here.  We're already inside a blk_start_plug() ...  blk_finish_plug()
section here, so skip that part of the original generic_writepages().

This reverts commit b2b0a5e9.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>

Merge tag 'kvmarm-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.2, take #2

- Pass the correct address to mte_clear_page_tags() on initialising
  a tagged page

- Plug a race against a GICv4.1 doorbell interrupt while saving
  the vgic-v3 pending state.

Pull another io_uring fix from Jens Axboe:
 "Just a single fix for a regression that happened in this release due
  to a poll change. Normally I would've just deferred it to next week,
  but since the original fix got picked up by stable, I think it's
  better to just send this one off separately.

  The issue is around the poll race fix, and how it mistakenly also got
  applied to multishot polling. Those don't need the race fix, and we
  should not be doing any reissues for that case. Exhaustive test cases
  were written and committed to the liburing regression suite for the
  reported issue, and additions for similar issues"

* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
  io_uring/poll: don't reissue in case of poll race on multishot request

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc and other subsystem driver fixes for
  6.2-rc5 to resolve a few reported issues. They include:

   - long time pending fastrpc fixes (should have gone into 6.1, my
     fault)

   - mei driver/bus fixes and new device ids

   - interconnect driver fixes for reported problems

   - vmci bugfix

   - w1 driver bugfixes for reported problems

  Almost all of these have been in linux-next with no reported problems,
  the rest have all passed 0-day bot testing in my tree and on the
  mailing lists where they have sat too long due to me taking a long
  time to catch up on my pending patch queue"

* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  VMCI: Use threaded irqs instead of tasklets
  misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
  gsmi: fix null-deref in gsmi_get_variable
  misc: fastrpc: Fix use-after-free race condition for maps
  misc: fastrpc: Don't remove map on creater_process and device_release
  misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
  misc: fastrpc: fix error code in fastrpc_req_mmap()
  mei: me: add meteor lake point M DID
  mei: bus: fix unlink on bus in error path
  w1: fix WARNING after calling w1_process()
  w1: fix deadloop in __w1_remove_master_device()
  comedi: adv_pci1760: Fix PWM instruction handling
  interconnect: qcom: rpm: Use _optional func for provider clocks
  interconnect: qcom: msm8996: Fix regmap max_register values
  interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
  dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC

Pull driver core fixes from Greg KH:
 "Here are three small driver and kernel core fixes for 6.2-rc5. They
  include:

   - potential gadget fixup in do_prlimit

   - device property refcount leak fix

   - test_async_probe bugfix for reported problem"

* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  prlimit: do_prlimit needs to have a speculation check
  driver core: Fix test_async_probe_init saves device in wrong array
  device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.2-rc5. It resolves a build
  issue reported and Fixed by Arnd in the vc04_services driver. It's
  been in linux-next this week with no reported problems"

* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_arm: fix enum vchiq_status return types

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
   messages when GNU Make 4.4 is used.

 - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.

 - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.

 - Support GNU Make 4.4 for scripts/jobserver-exec.

 - Show clearer error message when kernel/gen_kheaders.sh fails due to
   missing cpio.

* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: explicitly validate existence of cpio command
  scripts: support GNU make 4.4 in jobserver-exec
  kconfig: Update all declared targets
  scripts: rpm: make clear that mkspec script contains 4.13 feature
  init/Kconfig: fix LOCALVERSION_AUTO help text
  kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
  kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
  init/version-timestamp.c: remove unneeded #include <linux/version.h>
  docs: kbuild: remove mention to dropped $(objtree) feature

We potentially have old hashes of the xattr names generated on systems
with signed 'char' types.  Now that everybody uses '-funsigned-char',
those hashes will no longer match.

This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.

Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced.  In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To save the vgic LPI pending state with GICv4.1, the VPEs must all be
unmapped from the ITSs so that the sGIC caches can be flushed.
The opposite is done once the state is saved.

This is all done by using the activate/deactivate irqdomain callbacks
directly from the vgic code. Crutially, this is done without holding
the irqdesc lock for the interrupts that represent the VPE. And these
callbacks are changing the state of the irqdesc. What could possibly
go wrong?

If a doorbell fires while we are messing with the irqdesc state,
it will acquire the lock and change the interrupt state concurrently.
Since we don't hole the lock, curruption occurs in on the interrupt
state. Oh well.

While acquiring the lock would fix this (and this was Shanker's
initial approach), this is still a layering violation we could do
without. A better approach is actually to free the VPE interrupt,
do what we have to do, and re-request it.

It is more work, but this usually happens only once in the lifetime
of the VM and we don't really care about this sort of overhead.

Fixes: f66b7b15 ("KVM: arm64: GICv4.1: Try to save VLPI state in save_pending_tables")
Reported-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230118022348.4137094-1-sdonthineni@nvidia.com

Commit d77e59a8 ("arm64: mte: Lock a page for MTE tag
initialisation") added a call to mte_clear_page_tags() in case a
prior mte_copy_tags_from_user() failed in order to avoid stale tags in
the guest page (it should have really been a separate commit).
Unfortunately, the argument passed to this function was the address of
the struct page rather than the actual page address. Fix this function
call.

Fixes: d77e59a8 ("arm64: mte: Lock a page for MTE tag initialisation")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230119170902.1574756-1-catalin.marinas@arm.com

Pull gpio fixes from Bartosz Golaszewski:

 - fix a potential race condition and always set GPIOs used as interrupt
   source to input in gpio-mxc

 - fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU

* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
  gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
  gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
  gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock

Pull cifs fixes from Steve French:

 - important fix for packet signature calculation error

 - three fixes to correct DFS deadlock, and DFS refresh problem

 - remove an unused DFS function, and duplicate tcon refresh code

 - DFS cache lookup fix

 - uninitialized rc fix

* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: remove unused function
  cifs: do not include page data when checking signature
  cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
  cifs: handle cache lookup errors different than -ENOENT
  cifs: remove duplicate code in __refresh_tcon()
  cifs: don't take exclusive lock for updating target hints
  cifs: avoid re-lookups in dfs_cache_find()
  cifs: fix potential deadlock in cache_refresh_path()

Pull pin control fixes from Linus Walleij:

 - Compilation fix for Sunplus sp7021

 - Add some missing headers after a cleanup to the Nomadik driver

 - Fix pull type and mux routes on Rockchip RK3568

* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: rockchip: fix mux route data for rk3568
  pinctrl: rockchip: fix reading pull type on rk3568
  pinctrl: nomadik: Add missing header(s)
  pinctrl: sp7021: fix unused function warning

Pull rdma fixes from Jason Gunthorpe:

 - Several hfi1 patches fixing some long standing driver bugs

 - Overflow when working with sg lists with elements greater than 4G

 - An rxe regression with object numbering after the mrs reach their
   limit

 - A theoretical problem with the scatterlist merging code

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to calculate the last_pg properly
  IB/hfi1: Remove user expected buffer invalidate race
  IB/hfi1: Immediately remove invalid memory from hardware
  IB/hfi1: Fix expected receive setup error exit issues
  IB/hfi1: Reserve user expected TIDs
  IB/hfi1: Reject a zero-length user expected buffer
  RDMA/core: Fix ib block iterator counter overflow
  RDMA/rxe: Prevent faulty rkey generation
  RDMA/rxe: Fix inaccurate constants in rxe_type_info