- 17 Sep, 2013 40 commits
-
-
Avinash Kumar authored
replaced the printk debug lines with respective netdev_warn()/netdev_err() Signed-off-by:
Avinash kumar <avi.kp.137@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jon Bernard authored
This is a patch to fwserial.c that wraps a line which previously exceeded the 80 character limit warning found by checkpatch.pl. This driver is now warning and error free, according to checkpatch.pl Signed-off-by:
Jon Bernard <jbernard@tuxion.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Aldo Iljazi authored
Fixed space prohibition before semicolon, particularly: nvm.c:106: WARNING: space prohibited before semicolon nvm.c:1098: WARNING: space prohibited before semicolon nvm.c:1279: WARNING: space prohibited before semicolon nvm.c:2834: WARNING: space prohibited before semicolon nvm.c:3361: WARNING: space prohibited before semicolon nvm.c:4453: WARNING: space prohibited before semicolon Signed-off-by:
Aldo Iljazi <neonsync1@gmail.com> Signed-off-by:
-
Faris de Haan authored
Fixed a few of the coding style issues reported by checkpatch.pl Signed-off-by:
Faris de Haan <farisdehaan@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Faris de Haan authored
Fixed some of the coding style issues reported by checkpatch.pl Signed-off-by:
-
Avinash Kumar authored
fixed styling issue in pointer typecast. Signed-off-by:
-
Mark Einon authored
Adding some trivial formatting suggestions made by Dan Carpenter to the TODO. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
Remove braces from a few single line if statements. Signed-off-by:
-
Mark Einon authored
The rcv_pend_lock spinlock isn't used anymore. remove it. Signed-off-by:
-
Mark Einon authored
phy_lock is no longer used in any useful code, it's all been moved into a phy_device. Remove the lock definition and init. Signed-off-by:
-
Lidza Louina authored
This patch removes parentheses around return statements. They aren't needed. Signed-off-by:
Lidza Louina <lidza.louina@gmail.com> Signed-off-by:
-
Lidza Louina authored
This patch renames the struct board_t to dgnc_board. board_t wasn't a good name for it since the _t suffix is for typedefs. Signed-off-by:
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by:
-
Sachin Kamat authored
Code should be for the kernel version it is merged in. Version check is not necessary. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Code should be for the kernel version it is merged in. Version check is not necessary. Signed-off-by:
-
H Hartley Sweeten authored
Change the MODULE_DESCRIPTION to something useful instead of the generic "Comedi low-level driver". Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
Use the dev->read_subdev to get the comedi_subdevice instead of accessing the dev->subdevices array directly. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, rename this function. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, reorder the #include list. Signed-off-by:
-
H Hartley Sweeten authored
Tidy up the multi-line comments to follow the CodingStyle. Signed-off-by:
-
H Hartley Sweeten authored
Add some whitespace to tidy up the subdevice init. Signed-off-by:
-
H Hartley Sweeten authored
Interrupt support in this driver is optional. Don't fail the attach of the board if the request_irq() fails. Only allocate and setup the subdevice for the interrupt if the request_irq() was successful. Signed-off-by:
-
H Hartley Sweeten authored
The enabled state of the interrupt can be checked by reading the control register. Remove 'enabled_irq' from the private data. Since the private data is now empty, remove it completely and remove the allocation of it in parport_attach(). Signed-off-by:
-
H Hartley Sweeten authored
The control register for the parallel port is readable so there is no need to cache the current value in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Rename this function to better describe it's use. Use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
Rename this function to better describe it's use. Tidy it up to follow the normal comedi (*insn_bits) for DI subdevices. Signed-off-by:
-
H Hartley Sweeten authored
This is the (*insn_config) function for a DIO subdevice. It should be using the data[0] value as the "instruction" to perform on the subdevice. Use the comedi_dio_insn_config() helper to properly handle instructions. Also, rename the function to better describe it's use. Signed-off-by:
-
H Hartley Sweeten authored
Rename this function to better describe it's use. Use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
Use the subdevice s->state to hold the current state of the data register outputs instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Rename the register map defines to better describe the hardware. Add defines for the control register bits that enable the irq and change the direction of the data register. This gets rid of the "magic" numbers. Remove PARPORT_SIZE, it's only used when requesting the i/o region with comedi_request_region(). Signed-off-by:
-
H Hartley Sweeten authored
The extra mask used to only update the channels configured as outputs is not necessary in this driver. Remove it and use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
The extra mask used to only update the channels configured as outputs is not necessary in this driver. Remove it and use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
The extra mask used to only update the channels configured as outputs is not necessary in this driver. Remove it and use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
The extra mask used to only update the channels configured as outputs is not necessary in this driver. Remove it and use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
The extra mask used to only update the channels configured as outputs is not necessary in this driver. Remove it and use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
The extra mask used to only update the channels configured as outputs is not necessary in this driver. Remove it and use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Also, fix a bug where the state of the channels is returned in data[0]. The comedi core expects it to be returned in data[1]. Signed-off-by:
-
H Hartley Sweeten authored
Use the subdevice 'state' variable instead of carrying the state of the output channels in the private data. Use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Signed-off-by:
-
