- 24 Aug, 2016 22 commits
-
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
-
Julia Lawall authored
The venc_common_if structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Ezequiel Garcia authored
Currently, the hardware is not given a complete initial configuration. In order to fix this, this rather large commit reworks standard, frame format and input configuration. While at it, we introduce proper functions to configure each parameter, and as a result the code is a bit cleaner. Reported-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Hans Verkuil authored
Instead of referring to Y', Cb and Cr, it referred to Yc', Cbc and Crc, which were accidentally copied from the BT.2020 constant luminance text. Signed-off-by:
-
Hans Verkuil authored
The text of the note included text that shouldn't have been part of the note. Move that out of the note into the proper place. [mchehab@s-opensource.com: fix a trivial merge conflict] Signed-off-by:
-
Hans Verkuil authored
The V4L2_YCBCR_ENC_SYCC encoding is identical to V4L2_YCBCR_ENC_601. Remove V4L2_YCBCR_ENC_SYCC from the documentation since it should not be used. Signed-off-by:
-
Hans Verkuil authored
This define is a duplicate of V4L2_YCBCR_ENC_601. So mark it as 'should not be used' and put it under #ifndef __KERNEL__ to prevent drivers from referring to it. Signed-off-by:
-
Hans Verkuil authored
The SYCC Y'CbCr encoding is identical to the 601 encoding. Since the SYCC define is about to be removed for use in the kernel we need to drop it in the TPG code as well. This patch also adds a 4th decimal to the 601 conversion matrix. That was specified by the sYCC spec and it makes sense to use this across the board. [mchehab@s-opensource.com: fix conflicts with LaTeX math expression patch] Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/i2c/ad5820.c:61:24: error: dubious one-bit signed bitfield Signed-off-by: -
Hans Verkuil authored
This encoding is identical to the 601 encoding. The old duplicate SYCC define is about to be removed for use in the kernel, so remove its use in vivid first. Signed-off-by:
-
Hans Verkuil authored
The default quantization range of the Y'CbCr encodings of sRGB and AdobeRGB are full range instead of limited range according to the corresponding standards. Fix this in the V4L2_MAP_QUANTIZATION_DEFAULT macro. Signed-off-by:
-
Pavel Machek authored
This adds support for AD5820 autofocus coil, found for example in Nokia N900 smartphone. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Pavel Machek authored
Add documentation for ad5820 device tree binding. Signed-off-by:
Pavel Machek <pavel@denx.de> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Hans Verkuil authored
The s5p-tv driver has been replaced by the exynos drm driver for quite a long time now. Remove this driver to avoid having duplicate drivers, of which this one is considered dead code by Samsung. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Hans Verkuil authored
The sh_mobile_csi2 isn't used anymore (was it ever?), so remove it. Especially since the soc-camera framework is being deprecated. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Hans Verkuil authored
The functionality that was part of the tw686x-kh driver but not of the mainlined tw686x driver has now been added to the tw686x driver as well. So this driver no longer adds any functionality not available through the mainlined driver and it can now be removed. Signed-off-by:
-
- 23 Aug, 2016 18 commits
-
-
Nick Dyer authored
Document the new touch API. Signed-off-by:
Nick Dyer <nick@shmanahar.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Nick Dyer authored
Support both V4L2_TCH_FMT_TU08 and V4L2_PIX_FMT_GREY for backwards compatibility. Signed-off-by:
-
Nick Dyer authored
Function 54 implements access to various RMI4 diagnostic features. This patch adds support for retrieving this data. It registers a V4L2 device to output the data to user space. Signed-off-by:
Andrew Duggan <aduggan@synaptics.com> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Nick Dyer authored
There are different datatypes available from a maXTouch chip. Add support to retrieve reference data as well. Signed-off-by:
-
Nick Dyer authored
The mXT1386 family of chips have a different architecture which splits the diagnostic data into 3 columns. Signed-off-by:
-
Nick Dyer authored
Invert the diagnostic data to match the orientation of the input device. Signed-off-by:
-
Nick Dyer authored
The touchscreen may have a margin where not all the matrix is used. Read the parameters from T9 and T100 and take account of the difference. Note: this does not read the XORIGIN/YORIGIN fields so it assumes that the touchscreen starts at (0,0) Signed-off-by:
-
Nick Dyer authored
Register a video device to output T37 diagnostic data. Signed-off-by:
-
Nick Dyer authored
Atmel maXTouch devices have a T37 object which can be used to read raw touch deltas from the device. This consists of an array of 16-bit integers, one for each node on the touchscreen matrix. Signed-off-by:
-
Nick Dyer authored
Some touch controllers send out touch data in a similar way to a greyscale frame grabber. Add new device type VFL_TYPE_TOUCH: - This uses a new device prefix v4l-touch for these devices, to stop generic capture software from treating them as webcams. Otherwise, touch is treated similarly to video capture. - Add V4L2_INPUT_TYPE_TOUCH - Add MEDIA_INTF_T_V4L_TOUCH - Add V4L2_CAP_TOUCH to indicate device is a touch device Add formats: - V4L2_TCH_FMT_DELTA_TD16 for signed 16-bit touch deltas - V4L2_TCH_FMT_DELTA_TD08 for signed 16-bit touch deltas - V4L2_TCH_FMT_TU16 for unsigned 16-bit touch data - V4L2_TCH_FMT_TU08 for unsigned 8-bit touch data This support will be used by: - Atmel maXTouch (atmel_mxt_ts) - Synaptics RMI4. - sur40 Signed-off-by:
-
Nick Dyer authored
I'm leaving ITDev, so change to my personal email. My understanding is that someone at Atmel will take this on once their takeover by Microchip has settled down. Signed-off-by:
-
Niklas Söderlund authored
The primary reason for this change is to prepare for Gen3 support where there will be more then one possible video source. Each source will have its own media bus format and code, so it needs to be moved from the per device structure to a structure used to represent an individual connection to a video source. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Niklas Söderlund authored
The original drivers code to find a subdevice by looking in the DT grpah and how the callbacks to the v4l2 async bind framework where poorly written. The most obvious example of badness was the duplication of data in the struct rvin_graph_entity. This patch removes the data duplication, simplifies the parsing of the DT graph and add checks to the v4l2 callbacks. Signed-off-by:
-
Niklas Söderlund authored
The check for if the specific pixelformat is supported on the current chip should happen in VIDIOC_S_FMT and VIDIOC_TRY_FMT and not when we try to setup the hardware for streaming. Signed-off-by:
-
Niklas Söderlund authored
This is done in preparation for Gen3 support where media controller support will be mandatory for the driver. Signed-off-by:
-
Niklas Söderlund authored
Fix a error from the original driver where v4l2_device_call_until_err() where used for the pad specific v4l2 operation set_fmt. Also fix up the error path from this fix so if there is an error it will be propagated to the caller. The error path label have also been renamed as a result from a nitpicking review comment since we are fixing other issues here. Signed-off-by:
-
Niklas Söderlund authored
Fix a error from the original driver where the wrong error code is returned if the driver fails to get a IRQ number from platform_get_irq(). Signed-off-by:
-
Niklas Söderlund authored
When Gen3 support is added to the driver more then one possible video source entity will be possible. Knowing that the name entity is a bad one, rename it to digital since it will deal with the digital input source. Signed-off-by:
-
