- 02 Mar, 2010 27 commits
-
-
Alan Cox authored
The Nozomi tty handling is very broken on the open/close side (See http://bugzilla.kernel.org/show_bug.cgi?id=13024 for one example). In particular it marks the tty as closed on the first close() not on the last. Most of the logic is pretty solid except for the open/close path so switch to the tty_port helpers and let them do all the heavy lifting. This is also fixes all the POSIX behaviour violations in the open/close paths. Begin by adding the tty port usage Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Revised patch to use the new kfifo API. This replaces the one that was dropped from -next due to collisions with the kfifo API changes. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Maxime Bizon authored
The bcm6358 CPU has two uarts, make it possible to use the second one. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Maxime Bizon authored
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mike Frysinger authored
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sonic Zhang authored
If we always check for gdb breaks even when it isn't active, we get false positives on normal code and the system panics. URL: http://blackfin.uclinux.org/gf/tracker/5277Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Graf Yang authored
If we don't disable the DMA TX channel, an inopportune timeout will trigger the interrupt handler and may cause a dead lock with the spin_lock. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sonic Zhang authored
For UARTs that have dedicated hardware flow control support, there will be no gpios to request/free as they are part of the normal peripheral pins. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jiri Slaby authored
Stanse found a potential null dereference in mgsl_put_char and mgsl_write. There is a check for tty being NULL, but it is dereferenced earlier. Actually, tty cannot be NULL in .write and .put_char, so remove the tests. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ben Hutchings authored
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Rakib Mullick authored
Stephen Rothwell found the following warning (x86_64 allmodconfig): drivers/char/ip2/ip2main.c:511: warning: 'ip2_setup' defined but not used This patch adds module parameter to fix the above warning. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Rakib Mullick authored
On the kernel command line we can pass "module parameters". So #ifdef MODULE is obsolute now. Remove it completely. When CONFIG_PCI=n and building ip2main.c then we are hit by the following warning. So move *pdev into #ifdef CONFIG_PCI. drivers/char/ip2/ip2main.c: In function `ip2_loadmain': drivers/char/ip2/ip2main.c:542: warning: unused variable `pdev' Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Acked-by: Michael H. Warfield <mhw@WittsEnd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Rakib Mullick authored
We can pass "module parameters" on the kernel command line even when !MODULE. So, #ifdef MODULE becomes obsolete. Also move the declaration moxa_board_conf at the start of the function, since we were hit by the following warning. drivers/char/moxa.c: In function `moxa_init': drivers/char/moxa.c:1040: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Rakib Mullick<rakib.mullick@gmail.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Roel Kluin authored
vtermnos[] is unsigned, so this test was wrong. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Joe Perches authored
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert printks to pr_<level> Convert some embedded function names to %s...__func__ Remove a period after exclamation points. Remove #define pr_dbg which could be used by future kernel.h includes Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jiri Slaby authored
Stanse found unnecessary test in mxser_startup. tty is dereferenced earlier, the test is superfluous. Remove it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jiri Slaby authored
With gcc 4.0.2: drivers/char/cyclades.c: In function 'cyy_interrupt': drivers/char/cyclades.c:581: warning: 'info' may be used uninitialized in this function introduced by : commit 3aeea5b9 : Author: Jiri Slaby <jirislaby@gmail.com> : AuthorDate: Sat Sep 19 13:13:16 2009 -0700 : Commit: Live-CD User <linux@linux.site> : CommitDate: Sat Sep 19 13:13:16 2009 -0700 : : cyclades: introduce cyy_readb/writeb In fact the true branch which uses uninitialized 'info' can never happen because chip is always less than ->nchips and channel is always less than 4 which we alloc. So behave similar to rx handling and remove the test completely. I wonder why gcc 4.4.1 doesn't spit a word. Reported-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Roel Kluin authored
The variables were unsigned so the tests did not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kiros Yeh authored
Add different model (with a different PCI ID) to support Korenix JetCard. Signed-off-by: Kiros Yeh <kiros@korenix.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Baruch Siach authored
The platform code doesn't have to provide platform data to get sensible default behaviour from the imx serial driver. This patch does not handle NULL dereference in the IrDA case, which still requires a valid platform data pointer (in imx_startup()/imx_shutdown()), since I don't know whether there is a sensible default behaviour, or should the operation just fail cleanly. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Alan Cox <alan@linux.intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oskar Schirmer <os@emlix.com> Cc: Fabian Godehardt <fg@emlix.com> Cc: Daniel Glöckner <dg@emlix.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ira W. Snyder authored
This patch is heavily based on an earlier patch found on the linux-serial mailing list [1], written by Darius Augulis. The previous incarnation of this patch only supported a 2x serial port card. I have added support for my SYBA 6x serial port card, and tested on x86. [1]: http://marc.info/?l=linux-serial&m=124975806304760Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Fulghum authored
Fix transmit bug that could drop send data if write() called close to serial transmitter going idle after sending previous data. Bug is caused by incorrect use of device information member tx_count. Driver originally processed one data block (write call) at a time, waiting for transmit idle before sending more. tx_count recorded how much data was loaded in DMA buffers on write(), and was cleared on send completion. tx_count use was overloaded to record accumulated data from put_char() callback when transmitter was idle. A bug was introduced when transmit code was reworked to allow multiple blocks of data in the tx DMA buffers which keeps transmitter from going idle between blocks. tx_count was set to size of last block loaded, cleared when tx went idle, and monitored to know when to restart transmitter without proper synchronization. tx_count could be cleared when unsent data remained in DMA buffers and transmitter required restarting, effectively dropping unsent data. Solution: 1. tx_count now used only to track accumulated data from put_char 2. DMA buffer state tracked by direct inspection of descriptors with spinlock synchronization 3. consolidate these tasks in tx_load() : a. check for available buffer space b. load buffers c. restart DMA and or serial transmitter as needed These steps were previously duplicated in multiple places, sometimes incompletely. 4. fix use of tx_count as active transmit indicator, instead using tx_active which is meant for that purpose Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Albin Tonnerre authored
Permits using KGDB over the console with the atmel_serial driver. [akpm@linux-foundation.org: s/barrier/cpu_relax/] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Thiago Farina authored
This macro is a duplicate of ARRAY_SIZE defined in kernel api, so just use that instead. Signed-off-by: Thiago Farina <tfransosi@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Shmulik Ladkani authored
Augment the UPF_FIXED_TYPE logic, which currently applies to UART ports provisioned using platform_device_register. The suggested patch applies same logic into 'serial8250_register_ports', making UART ports provisioned using early_serial_setup inherit their properties from the uart_config entry. Signed-off-by: Shmulik Ladkani <shmulik@jungo.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
sonic zhang authored
Fit blackfin uart over sport driver into common uart inftrastructure. It is based on the early platform interfaces to get the platform data early when the console is initilized. 1. Enable sport uart driver to change uart baud, data bit, stop bit at runtime. Bind the index of uart device nodes to physical index of sports. 2. Move all platform data into arch specific board files. Register and probe platform device data in both early and normal stages. 3. Console is registered in sport uart driver as well. 4. Remove 500 us block waiting in sport tx stop code by putting a dummy data into tx fifo to make sure the sport tx stops when all bytes are shifted out except for the dummy data. 5. clean up a bit and fix up coding style. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 01 Mar, 2010 13 commits
-
-
Linus Torvalds authored
Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (40 commits) DaVinci DM365: Adding support for SPI EEPROM DaVinci DM365: Adding DM365 SPI support DaVinci DM355: Modifications to DM355 SPI support DaVinci: SPI: Adding header file for SPI support. davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table() DaVinci: DM365: Voice codec support for the DM365 SoC davinci: clock: let clk->set_rate function sleep Add SDA and SCL pin numbers to i2c platform data davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138 davinci: build list of unused EDMA events dynamically davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case davinci: Keep count of channel controllers on a platform davinci: Correct return value of edma_alloc_channel api davinci: add CDCE949 support on DM6467 EVM davinci: add support for CDCE949 clock synthesizer davinci: da850/omap-l138 EVM: register for suspend support davinci: da850/omap-l138: add support for SoC suspend davinci: add power management support DaVinci: DM365: Changing default queue for DM365. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (38 commits) sata_via: Delay on vt6420 when starting ATAPI DMA write ata: Detect Delkin Devices compact flash pata_efar: Enable parallel scanning pata_atiixp: enable parallel scan [libata] pata_atiixp: add locking for parallel scanning [libata] pata_efar: add locking for parallel scanning libata: Pass host flags into the pci helper [libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI libata: Allow pata_legacy to be built on non-ISA but PCI systems pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards [libata] pata_at91: fix backslash-continued string pata_via: store UDMA masks in via_isa_bridges table pata_via: fix address setup timings underlocking pata_serverworks: fix error message pata_serverworks: fix PIO setup for the second channel pata_efar: fix secondary port support pata_cypress: fix PIO timings underclocking pata_cs5535: use correct values for PIO1 and PIO2 data timings pata_cmd64x: remove unused definitions ...
-
Bart Hartgers authored
When writing a disc on certain lite-on dvd-writers (also rebadged as optiarc/LG/...) connected to a vt6420, the ATAPI CDB ends up in the datastream and on the disc, causing silent corruption. Delaying between sending the CDB and starting DMA seems to prevent this. I do not know if there are burners that do not suffer from this, but the patch should be safe for those as well. There are many reports of this issue, but AFAICT no solution was found before. For example: http://lkml.indiana.edu/hypermail/linux/kernel/0802.3/0561.htmlSigned-off-by: Bart Hartgers <bart.hartgers@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ben Gardner authored
I have a Delkin Devices compact flash card that isn't being recognized using the SATA/PATA drivers. The card is recognized and works with the deprecated ATA drivers. The error I am seeing is: ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) I tracked it down to ata_id_is_cfa() in include/linux/ata.h. The Delkin card has id[0] set to 0x844a and id[83] set to 0. This isn't what the kernel expects and is probably incorrect. The simplest work-around is to add a check for 0x844a to ata_id_is_cfa(). Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Alan Cox authored
Again originally proposed by Bartlomiej but this does it by using the generic helper logic instead. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Alan Cox authored
This was originally proposed by Bartlomiej but as a device specific expansion of the init_one function rather than making the helper more generic. Enable the parallel scan via the generic flags. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Bartlomiej Zolnierkiewicz authored
This is similar change as commit 60c3be38 for ata_piix host driver and while pata_atiixp doesn't enable parallel scan yet the race could probably also be triggered by requesting re-scanning of both ports at the same time using SCSI sysfs interface. [Ported to current tree without other patch dependancies by Alan Cox] Original is Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> This one is Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Bartlomiej Zolnierkiewicz authored
Add clearing of UDMA enable bit also for PIO modes and then add extra locking for parallel scanning. This is similar change as commit 60c3be38 for ata_piix host driver and while pata_efar doesn't enable parallel scan yet the race could probably also be triggered by requesting re-scanning of both ports at the same time using SCSI sysfs interface. [Ported to current kernel without other patch dependancies by Alan Cox] Original is Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> This one is Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Alan Cox authored
This allows parallel scan and the like to be set without having to stop using the existing full helper functions. This patch merely adds the argument and fixes up the callers. It doesn't undo the special cases already in the tree or add any new parallel callers. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Christoph Egger authored
The marvell driver comtains a fallback to ahci for the sata ports which is incorrectly checked as CONFIG_AHCI while the only AHCI config item is actually called SATA_AHCI (which also sounds sensible considering it's a fallback for the sata ports). Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Alan Cox authored
This is needed for some unsupported hardware setups on strange 64bit mainboards where crazy stuff has been done like putting flash ata adapters on the LPC bus, or where the real hardware is hidden/confused. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Bartlomiej Zolnierkiewicz authored
PDC2026x chipsets need the same treatment as PDC20246 one. This is completely untested but will hopefully fix UDMA issues that people have been reporting against pata_pdc202xx_old for the last couple of years. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Bartlomiej Zolnierkiewicz authored
On Monday 04 January 2010 02:30:24 pm Russell King wrote: > Found the problem - getting rid of the read of the alt status register > after the command has been written fixes the UDMA CRC errors on write: > > @@ -676,7 +676,8 @@ void ata_sff_exec_command(struct ata_port *ap, const struct > ata_taskfile *tf) > DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); > > iowrite8(tf->command, ap->ioaddr.command_addr); > - ata_sff_pause(ap); > + ndelay(400); > +// ata_sff_pause(ap); > } > EXPORT_SYMBOL_GPL(ata_sff_exec_command); > > > This rather makes sense. The PDC20247 handles the UDMA part of the > protocol. It has no way to tell the PDC20246 to wait while it suspends > UDMA, so that a normal register access can take place - the 246 ploughs > on with the register access without any regard to the state of the 247. > > If the drive immediately starts the UDMA protocol after a write to the > command register (as it probably will for the DMA WRITE command), then > we'll be accessing the taskfile in the middle of the UDMA setup, which > can't be good. It's certainly a violation of the ATA specs. Fix it by adding custom ->sff_exec_command method for UDMA33 chipsets. Debugged-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-