Add the missing free_netdev() before return from ltq_etop_probe()
in the error handling case.

Fixes: 14d4e308 ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can remove a bit of code duplication by reusing the new
fib6_nh_release_dsts helper in fib6_nh_release. Their only difference is
that fib6_nh_release's version doesn't use atomic operation to swap the
pointers because it assumes the fib6_nh is no longer visible, while
fib6_nh_release_dsts can be used anywhere.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can optimize resilient nexthop group replaces by reducing the number of
synchronize_net calls. After commit 1005f19b ("net: nexthop: release
IPv6 per-cpu dsts when replacing a nexthop group") we always do a
synchronize_net because we must ensure no new dsts can be created for the
replaced group's removed nexthops, but we already did that when replacing
resilient groups, so if we always call synchronize_net after any group
type replacement we'll take care of both cases and reduce synchronize_net
calls for resilient groups.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Assigning crypto_info variables in advance can simplify the logic
of accessing value and move related local variables to a smaller
scope.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dwmac-qcom-ethqos currently exposes a mechanism to dump rgmii registers
after the 'stmmac_dvr_probe()' returns. However with commit
5ec55823 ("net: stmmac: add clocks management for gmac driver"),
we now let 'pm_runtime_put()' disable the clocks before returning from
'stmmac_dvr_probe()'.

This causes a crash when 'rgmii_dump()' register dumps are enabled,
as the clocks are already off.

Since other dwmac drivers (possible future users as well) might
require a similar register dump feature, introduce a platform level
callback to allow the same.

This fixes the crash noticed while enabling rgmii_dump() dumps in
dwmac-qcom-ethqos driver as well. It also allows future changes
to keep a invoking the register dump callback from the correct
place inside 'stmmac_dvr_probe()'.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'dest' bitmap is fully initialized by the 'for' loop, so there is no
need to explicitly reset it.

This also makes this function in line with 'ethnl_features_to_bitmap32()'
which does not clear the destination before writing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/17fca158231c6f03689bd891254f0dd1f4e84cb8.1638091829.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With this feature, we can use the ethtools to get tx/rx
queues stats. This patch, introduce the ifb_update_q_stats
helper to update the queues stats, and ifb_q_stats to simplify
the codes.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Link: https://lore.kernel.org/r/20211128014631.43627-1-xiangxia.m.yue@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I think there's no benefit in reporting a date from almost 6 yrs ago.
Let ethtool report the default (kernel version) instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.

Generated by: scripts/coccinelle/misc/flexible_array.cocci

Fixes: 23ae3a78 ("net: dsa: felix: add stream gate settings for psfp")
CC: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
hns3: some cleanups for -next

To improve code readability and simplicity, this series refactor some
functions in the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_set_l2l3l4() is a bit too long. So add two
new functions hns3_set_l3_type() and hns3_set_l4_csum_length()
to simplify code and improve code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_handle_bdinfo() is a bit too long. So add two
new functions hns3_handle_rx_ts_info() and hns3_handle_rx_vlan_tag(
to simplify code and improve code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_nic_get_stats64() is a bit too long. So add a
new function hns3_fetch_stats() to simplify code and improve
code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch encapsulates the process code for queue to qset config of two
mode(tc based and vnet based) into two function, for making code more
concise.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch encapsulates the process code of tc based schedule mode of
function hclge_tm_lvl34_schd_mode_cfg() into a new function
hclge_tm_schd_mode_tc_base_cfg(). It make code more concise and the new
process code can be reused.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To reuse the code of converting speed of driver to speed of firmware in
function hclge_cfg_mac_speed_dup_hw(), encapsulate them into a new
function hclge_convert_to_fw_speed().
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_get_tx_timeo_queue_info() is a bit too long. So add two
new functions hns3_dump_queue_stats() and hns3_dump_queue_reg() to
simplify code and improve code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use for statement to optimize some print work of function
hclge_dbg_dump_rst_info() and hclge_dbg_dump_mac_enable_status() to
improve code simplicity.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split rx copybreak handle into a separate function from function
hns3_nic_reuse_page() to improve code simplicity.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the hclge_reset_prepare_general function uses the goto
statement to jump upwards, which increases code complexity and makes
the program structure difficult to understand. In addition, if
reset_pending is set, retry_cnt cannot be increased. This may result
in a failure to exit the retry or increase the number of retries.

Use the while statement instead to make the program easier to understand
and solve the problem that the goto statement cannot be exited.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once tcp small queue check failed in tcp_small_queue_check(), the
throughput of tcp will be limited, and it's hard to distinguish
whether it is out of tcp congestion control.

Add statistics of LINUX_MIB_TCPSMALLQUEUEFAILURE for this scene.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.

Fixes: e44ef4e4 ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Colin Foster says:

====================
update seville to use shared MDIO driver

This patch set exposes and utilizes the shared MDIO bus in
drivers/net/mdio/msio-mscc-miim.c

v3:
    * Fix errors using uninitilized "dev" inside the probe function.
    * Remove phy_regmap from the setup function, since it currently
    isn't used
    * Remove GCB_PHY_PHY_CFG definition from ocelot.h - it isn't used
    yet...

v2:
    * Error handling (thanks Andrew Lunn)
    * Fix logic errors calling mscc_miim_setup during patch 1/3 (thanks
    Jakub Kicinski)
    * Remove unnecessary felix_mdio file (thanks Vladimir Oltean)
    * Pass NULL to mscc_miim_setup instead of GCB_PHY_PHY_CFG, since the
    phy reset isn't handled at that point of the Seville driver (patch
    3/3)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch to a shared MDIO access implementation by way of the mdio-mscc-miim
driver.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch seville to use of_mdiobus_register(bus, NULL) instead of just
mdiobus_register. This code is about to be pulled into a separate module
that can optionally define ports by the device_node.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Utilize regmap instead of __iomem to perform indirect mdio access. This
will allow for custom regmaps to be used by way of the mscc_miim_setup
function.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Horatiu Vultur says:

====================
net: lan966x: Add lan966x switch driver

This patch series add support for Microchip lan966x driver

The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
2 Quad-SGMII/Quad-USGMII interfaces.

Initially it adds support only for the ports to behave as simple
NIC cards. In the future patches it would be extended with other
functionality like Switchdev, PTP, Frame DMA, VCAP, etc.

v4->v5:
- more fixes to the reset of the switch, require all resources before
  activating the hardware
- fix to lan966x-switch binding
- implement get/set_pauseparam in ethtool_ops
- stop calling lan966x_port_link_down when calling lan966x_port_pcs_set and
  call it in lan966x_phylink_mac_link_down

v3->v4:
- add timeouts when injecting/extracting frames, in case the HW breaks
- simplify the creation of the IFH
- fix the order of operations in lan966x_cleanup_ports
- fixes to phylink based on Russel review

v2->v3:
- fix compiling issues for x86
- fix resource management in first patch

v1->v2:
- add new patch for MAINTAINERS
- add functions lan966x_mac_cpu_learn/forget
- fix build issues with second patch
- fix the reset of the switch, return error if there is no reset controller
- start to use phylink_mii_c22_pcs_decode_state and
  phylink_mii_c22_pcs_encode_advertisement to remove duplicate code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update MAINTAINERS to include lan966x driver
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for statistics counters for the network
interfaces. Also adds support for configuring the network interface via
ethtool like: speed, duplex etc.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for MAC table operations like add and forget.
Also add the functionality to read the MAC address from DT, if there is
no MAC set in DT it would use a random one.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for netdev and phylink in the switch. The
injection + extraction is register based. This will be replaced with DMA
accees.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds basic SwitchDev driver framework for lan966x. It
includes only the IO range mapping and probing of the switch.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the lan966x switch device driver bindings
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IXP4xx is being migrated to device tree only. Convert this
driver to use device tree probing.

Pull in all the boardfile code from the one boardfile and
make it local, pull all the boardfile parameters from the
device tree instead of the board file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds device tree bindings for the IXP4xx V.35 WAN high
speed serial (HSS) link.

An example is added to the NPE example where the HSS appears
as a child.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

A contact at Realtek has clarified what exactly the units of RGMII RX
delay are. The answer is that the unit of RX delay is "about 0.3 ns".
Take this into account when parsing rx-internal-delay-ps by
approximating the closest step value. Delays of more than 2.1 ns are
rejected.

This obviously contradicts the previous assumption in the driver that a
step value of 4 was "about 2 ns", but Realtek also points out that it is
easy to find more than one RX delay step value which makes RGMII work.

Fixes: 4af2950c ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Cc: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 4af2950c ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Probe deferral is not an error, so don't log this as an error:

[0.590156] realtek-smi ethernet-switch: unable to register switch ret = -517
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior patch:
]# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable                                [ OK ]
Device "bridge" does not exist.
TEST: Disable multicast vlan snooping when vlan filtering is disabled   [FAIL]
        Vlan filtering is disabled but multicast vlan snooping is still enabled

After patch:
# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable                                [ OK ]
TEST: Disable multicast vlan snooping when vlan filtering is disabled   [ OK ]

Fixes: f5a9dd58 ("selftests: net: bridge: add test for vlan_filtering dependency")
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benjamin Poirier says:

====================
net: mpls: Cleanup nexthop iterator macros

The mpls macros for_nexthops and change_nexthops were probably copied
from decnet or ipv4 but they grew a superfluous variable and lost a
beneficial "const".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>