Instead of passing around an ops structure with function pointers,
which forces indirect calls to be used, refactor the code slightly
so we can use ordinary function calls. At the same time, switch to
a static key to decide whether or not the SIMD code path may be used.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Existing RNG data read timeout is 200us but it doesn't cover EIP76 RNG
data rate which takes approx. 700us to produce 16 bytes of output data
as per testing results. So configure the timeout as 1000us to also take
account of lack of udelay()'s reliability.

Fixes: 38321242 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

safexcel_pci_remove() is only used locally in the module and not exported,
so added a static function specifier.
This fixes a sparse issue reported by Ben Dooks.

Fixes: 625f269a ("crypto: inside-secure - add support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Always take the zero length hash value for SM3 from the local constant
to avoid a reported build error when SM3 is configured to be a module.

Fixes: 0f2bc131 ("crypto: inside-secure - Added support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Arguments are supposed to be ordered high then low.

Fixes: c8b4b477 ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit daae28de has moved add_early_randomness() out of the
rng_mutex and tries to protect the reference of the new rng device
by incrementing the reference counter.

But in hwrng_register(), the function can be called with a new device
that is not set as the current_rng device and the reference has not been
initialized. This patch fixes the problem by not using the reference
counter when the device is not the current one: the reference counter
is only meaningful in the case of the current rng device and a device
is not used if it is not the current one (except in hwrng_register())

The problem has been reported by Marek Szyprowski on ARM 32bit
Exynos5420-based Chromebook Peach-Pit board:

WARNING: CPU: 3 PID: 1 at lib/refcount.c:156 hwrng_register+0x13c/0x1b4
refcount_t: increment on 0; use-after-free.
Modules linked in:
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00061-gdaae28de
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01124c8>] (unwind_backtrace) from [<c010dfb8>] (show_stack+0x10/0x14)
[<c010dfb8>] (show_stack) from [<c0ae86d8>] (dump_stack+0xa8/0xd4)
[<c0ae86d8>] (dump_stack) from [<c0127428>] (__warn+0xf4/0x10c)
[<c0127428>] (__warn) from [<c01274b4>] (warn_slowpath_fmt+0x74/0xb8)
[<c01274b4>] (warn_slowpath_fmt) from [<c054729c>] (hwrng_register+0x13c/0x1b4)
[<c054729c>] (hwrng_register) from [<c0547e54>] (tpm_chip_register+0xc4/0x274)
...
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: daae28de ("hwrng: core - move add_early_randomness() out of rng_mutex")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the PowerPC Nest (NX) implementation of AES-CTR from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the PowerPC Nest (NX) implementation of AES-CBC from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the PowerPC Nest (NX) implementation of AES-ECB from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The NX crypto driver is using 'struct blkcipher_desc' to pass the IV
around, even for AEADs (for which it creates the struct on the stack).
This is not appropriate since this structure is part of the "blkcipher"
API, which is deprecated and will be removed.

Just pass around the IV directly instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the VIA PadLock implementations of AES-ECB and AES-CBC from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the S390 CPACF implementations of DES-ECB,
DES-CBC, DES-CTR, 3DES-ECB, 3DES-CBC, and 3DES-CTR from the deprecated
"blkcipher" API to the "skcipher" API.  This is needed in order for the
blkcipher API to be removed.

Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the S390 CPACF protected key implementations
of AES-ECB, AES-CBC, AES-XTS, and AES-CTR from the deprecated
"blkcipher" API to the "skcipher" API.  This is needed in order for the
blkcipher API to be removed.

Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the S390 CPACF implementations of AES-ECB,
AES-CBC, AES-XTS, and AES-CTR from the deprecated "blkcipher" API to the
"skcipher" API.  This is needed in order for the blkcipher API to be
removed.

Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the SPARC64 DES opcodes implementations of
DES-ECB, DES-CBC, 3DES-ECB, and 3DES-CBC from the deprecated "blkcipher"
API to the "skcipher" API.  This is needed in order for the blkcipher
API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the SPARC64 Camellia opcodes implementations
of Camellia-ECB and Camellia-CBC from the deprecated "blkcipher" API to
the "skcipher" API.  This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the SPARC64 AES opcodes implementations of
AES-ECB, AES-CBC, and AES-CTR from the deprecated "blkcipher" API to the
"skcipher" API.  This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A warning message reported by a static analysis tool:
  "
  Either the condition 'if(skb)' is redundant or there is possible null
  pointer dereference: skb.
  "

Remove the unused redundant check.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To avoid compile error in some platforms, select NEED_SG_DMA_LENGTH in
qm Kconfig.

Fixes: dfed0098 ("crypto: hisilicon - add hardware SGL support")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/ux500/hash/hash_core.c: In function hash_set_dma_transfer:
drivers/crypto/ux500/hash/hash_core.c:143:15: warning: variable cookie set but not used [-Wunused-but-set-variable]

It is not used since commit 8a63b199 ("crypto:
ux500 - Add driver for HASH hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of allowing the Crypto Extensions algorithms to be selected when
using a toolchain that does not support them, and complain about it at
build time, use the information we have about the compiler to prevent
them from being selected in the first place. Users that are stuck with
a GCC version <4.8 are unlikely to care about these routines anyway, and
it cleans up the Makefile considerably.

While at it, add explicit 'armv8-a' CPU specifiers to the code that uses
the 'crypto-neon-fp-armv8' FPU specifier so we don't regress Clang, which
will complain about this in version 10 and later.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The geode AES driver is heavily broken because it stores per-request
state in the transform context.  So it will crash or produce the wrong
result if used by any of the many places in the kernel that issue
concurrent requests for the same transform object.

This driver is also implemented using the deprecated blkcipher API,
which makes it difficult to fix, and puts it among the drivers
preventing that API from being removed.

Convert this driver to use the skcipher API, and change it to not store
per-request state in the transform context.

Fixes: 9fe757b0 ("[PATCH] crypto: Add support for the Geode LX AES hardware")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add binding documentation for the True Random Number Generator
found on Samsung Exynos 5250+ SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Antoine Tenart <antoine.tenart@ack.tf>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix the following build warnings by adding a header for
the definitions shared between jitterentropy.c and
jitterentropy-kcapi.c. Fixes the following:

crypto/jitterentropy.c:445:5: warning: symbol 'jent_read_entropy' was not declared. Should it be static?
crypto/jitterentropy.c:475:18: warning: symbol 'jent_entropy_collector_alloc' was not declared. Should it be static?
crypto/jitterentropy.c:509:6: warning: symbol 'jent_entropy_collector_free' was not declared. Should it be static?
crypto/jitterentropy.c:516:5: warning: symbol 'jent_entropy_init' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:59:6: warning: symbol 'jent_zalloc' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:64:6: warning: symbol 'jent_zfree' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:69:5: warning: symbol 'jent_fips_enabled' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:74:6: warning: symbol 'jent_panic' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:79:6: warning: symbol 'jent_memcpy' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:93:6: warning: symbol 'jent_get_nstime' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Stephan Mueller <smueller@chronox.de
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There is a spelling mistake in a dev_err message. Fix it. Add in missing
newline.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit 79c65d17 ("crypto: cbc - Convert to skcipher") updated
the generic CBC template wrapper from a blkcipher to a skcipher algo,
to get away from the deprecated blkcipher interface. However, as a side
effect, drivers that instantiate CBC transforms using the blkcipher as
a fallback no longer work, since skciphers can wrap blkciphers but not
the other way around. This broke the geode-aes driver.

So let's fix it by moving to the sync skcipher interface when allocating
the fallback. At the same time, align with the generic API for ECB and
CBC by rejecting inputs that are not a multiple of the AES block size.

Fixes: 79c65d17 ("crypto: cbc - Convert to skcipher")
Cc: <stable@vger.kernel.org> # v4.20+ ONLY
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Florian Bezdeka <florian@bezdeka.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In crypto_reportstat, a new skb is created by nlmsg_new(). This skb is
leaked if crypto_reportstat_alg() fails. Required release for skb is
added.

Fixes: cac5818c ("crypto: user - Implement a generic crypto statistics")
Cc: <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In crypto_report, a new skb is created via nlmsg_new(). This skb should
be released if crypto_report_alg() fails.

Fixes: a38f7907 ("crypto: Add userspace configuration API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

when libkcapi test is executed  using HW accelerator, cipher operation
return -74.Since af_alg_async_cb->ki_complete treat err as unsigned int,
libkcapi receive 429467222 even though it expect -ve value.

Hence its required to cast resultlen to int so that proper
error is returned to libkcapi.

AEAD one shot non-aligned test 2(libkcapi test)
./../bin/kcapi   -x 10   -c "gcm(aes)" -i 7815d4b06ae50c9c56e87bd7
-k ea38ac0c9b9998c80e28fb496a2b88d9 -a
"853f98a750098bec1aa7497e979e78098155c877879556bb51ddeb6374cbaefc"
-t "c4ce58985b7203094be1d134c1b8ab0b" -q
"b03692f86d1b8b39baf2abb255197c98"

Fixes: d887c52d ("crypto: algif_aead - overhaul memory management")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

commit 394a9e04 ("crypto: cfb - add missing 'chunksize' property")
adds a test vector where the input length is smaller than the IV length
(the second test vector). This revealed a NULL pointer dereference in
the atmel-aes driver, that is caused by passing an incorrect offset in
scatterwalk_map_and_copy() when atmel_aes_complete() is called.

Do not save the IV in req->info of ablkcipher_request (or equivalently
req->iv of skcipher_request) when req->nbytes < ivsize, because the IV
will not be further used.

While touching the code, modify the type of ivsize from int to
unsigned int, to comply with the return type of
crypto_ablkcipher_ivsize().

Fixes: 91308019 ("crypto: atmel-aes - properly set IV after {en,de}crypt")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that the Clang compiler has taken it upon itself to police the
compiler command line, and reject combinations for arguments it views
as incompatible, the AEGIS128 no longer builds correctly, and errors
out like this:

  clang-10: warning: ignoring extension 'crypto' because the 'armv7-a'
  architecture does not support it [-Winvalid-command-line-argument]

So let's switch to armv8-a instead, which matches the crypto-neon-fp-armv8
FPU profile we specify. Since neither were actually supported by GCC
versions before 4.8, let's tighten the Kconfig dependencies as well so
we won't run into errors when building with an ancient compiler.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: <ci_notify@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When both PCI and OF are disabled, no drivers are registered, and
we get some unused-function warnings:

drivers/crypto/inside-secure/safexcel.c:1221:13: error: unused function 'safexcel_unregister_algorithms' [-Werror,-Wunused-function]
static void safexcel_unregister_algorithms(struct safexcel_crypto_priv *priv)
drivers/crypto/inside-secure/safexcel.c:1307:12: error: unused function 'safexcel_probe_generic' [-Werror,-Wunused-function]
static int safexcel_probe_generic(void *pdev,
drivers/crypto/inside-secure/safexcel.c:1531:13: error: unused function 'safexcel_hw_reset_rings' [-Werror,-Wunused-function]
static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv)

It's better to make the compiler see what is going on and remove
such ifdef checks completely. In case of PCI, this is trivial since
pci_register_driver() is defined to an empty function that makes the
compiler subsequently drop all unused code silently.

The global pcireg_rc/ofreg_rc variables are not actually needed here
since the driver registration does not fail in ways that would make
it helpful.

For CONFIG_OF, an IS_ENABLED() check is still required, since platform
drivers can exist both with and without it.

A little change to linux/pci.h is needed to ensure that
pcim_enable_device() is visible to the driver. Moving the declaration
outside of ifdef would be sufficient here, but for consistency with the
rest of the file, adding an inline helper is probably best.

Fixes: 212ef6f2 ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>	# pci.h
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A previous fixup avoided an unused variable warning but replaced
it with a slightly scarier warning:

drivers/crypto/inside-secure/safexcel.c:1100:6: error: variable 'irq' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]

This is harmless as it is impossible to get into this case, but
the compiler has no way of knowing that. Add an explicit error
handling case to make it obvious to both compilers and humans
reading the source.

Fixes: 212ef6f2 ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Here adds maintainer information for high performance RSA
engine (HPRE) driver.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

HiSilicon HPRE engine driver uses debugfs to provide debug information,
the usage can be found in /Documentation/ABI/testing/debugfs-hisi-hpre.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add debugfs descriptions for HiSilicon HPRE driver.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

HiSilicon HPRE engine supports PCI SRIOV. This patch enable
this feature. User can enable VFs and pass through them to VM,
same HPRE driver can work in VM to provide RSA and DH algorithms
by crypto akcipher and kpp interfaces.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The HiSilicon HPRE accelerator implements RSA and DH algorithms. It
uses Hisilicon QM as interface to CPU.

This patch provides PCIe driver to the accelerator and registers its
algorithms to crypto akcipher and kpp interfaces.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes some misc problems in sgl codes, e.g. missing static,
sparse error and input parameter check.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>