* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: select ARCH_NO_SYSDEV_OPS.
  sh: fix build error in board-sh7757lcr.c
  sh: landisk: Remove whitespace
  sh: landisk: Remove mv_nr_irqs
  sh: sh-sci: Fix double initialization by serial_console_setup
  serial: sh-sci: prevent setup of uninitialized serial console
  dma: shdma: add checking the DMAOR_AE in sh_dmae_err

Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', 'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix FPU exception handling on non-SSE systems
  x86, hibernate: Initialize mmu_cr4_features during boot
  x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
  x86: visws: Fixup irq overhaul fallout

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Clean up rebalance_domains() load-balance interval calculation

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
  rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix cpumask leak in __setup_irq()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Fix listing incorrect line number with inline function
  perf probe: Fix to find recursively inlined function
  perf probe: Fix multiple --vars options behavior
  perf probe: Fix to remove redundant close
  perf probe: Fix to ensure function declared file

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (28 commits)
  staging: usbip: bugfix for isochronous packets and optimization
  staging: usbip: bugfix add number of packets for isochronous frames
  staging: usbip: bugfixes related to kthread conversion
  staging: usbip: fix shutdown problems.
  staging: hv: Fix GARP not sent after Quick Migration
  staging: IIO: IMU: ADIS16400: Avoid using printk facility directly
  staging: IIO: IMU: ADIS16400: Fix product ID check, skip embedded revision number
  staging: IIO: IMU: ADIS16400: Make sure only enabled scan_elements are pushed into the ring
  staging: IIO: IMU: ADIS16400: Fix addresses of GYRO and ACCEL calibration offset
  staging: IIO: IMU: ADIS16400: Add delay after self test
  staging: IIO: IMU: ADIS16400: Fix up SPI messages cs_change behavior
  staging/rtl81*: build as loadable modules only
  staging: brcm80211: removed 'is_amsdu causing toss' log spam
  staging: brcm80211: fix for 'Short CCK' log spam
  staging: brcm80211: fix for 'AC_BE txop..' logs spammed problem
  staging: memrar: remove driver from tree
  staging: sep: remove last memrar remnants
  staging: fix hv_mouse build, needs delay.h
  staging: fix olpc_dcon build errors
  staging: sm7xx: fixed defines
  ...

Fix up trivial conflict in drivers/staging/memrar/memrar_handler.c
(deleted vs trivial spelling fixes)

* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: move and fix substitue search for missing CPUID entries
  KVM: fix XSAVE bit scanning
  KVM: Enable async page fault processing
  KVM: fix crash on irqfd deassign

* 'for-linus' of git://git.infradead.org/ubifs-2.6:
  UBI: do not select KALLSYMS_ALL
  UBI: do not compare array with NULL
  UBI: check if we are in RO mode in the erase routine
  UBIFS: fix debugging failure in dbg_check_space_info
  UBIFS: fix error path in dbg_debugfs_init_fs
  UBIFS: unify error path dbg_debugfs_init_fs
  UBIFS: do not select KALLSYMS_ALL
  UBIFS: fix assertion warnings
  UBIFS: fix oops on error path in read_pnode
  UBIFS: do not read flash unnecessarily

* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for CH Pro Throttle
  HID: hid-magicmouse: Increase evdev buffer size
  HID: add FF support for Logitech G25/G27
  HID: roccat: Add support for wireless variant of Pyra
  HID: Fix typo Keyoutch -> Keytouch
  HID: add support for Skycable 0x3f07 wireless presenter

Fix build failure issue for hv_mouse
When build 2.6.39-rc1 kernel, it will be blocked at build hv_mouse.

  drivers/staging/hv/hv_mouse.c: In function ‘ReleaseInputDevice’:
  drivers/staging/hv/hv_mouse.c:293: error: implicit declaration of function ‘udelay’
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The normal mmap paths all avoid creating a mapping where the pgoff
inside the mapping could wrap around due to overflow.  However, an
expanding mremap() can take such a non-wrapping mapping and make it
bigger and cause a wrapping condition.

Noticed by Robert Swiecki when running a system call fuzzer, where it
caused a BUG_ON() due to terminally confusing the vma_prio_tree code.  A
vma dumping patch by Hugh then pinpointed the crazy wrapped case.
Reported-and-tested-by: Robert Swiecki <robert@swiecki.net>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The sfi_mrtc_array[] only gets initialized when the sfi mrtc
table is parsed, so the vrtc_paddr should be initalized after it
too.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Commit f44f7f96 ("RTC: Initialize kernel state from RTC") caused a
boot regression on the MRST platform.

The reason is that rtc_device_register() calls rtc_read_alarm() after
that change, which function does not have all driver data set up yet.

The rtc-mrst driver needs to call dev_set_drvdata() before rtc_device_register()
gets called.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1302140384-27571-1-git-send-email-feng.tang@intel.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

On 32bit systems without SSE (that is, they use FSAVE/FRSTOR for FPU
context switches), FPU exceptions in user mode cause Oopses, BUGs,
recursive faults and other nasty things:

fpu exception: 0000 [#1]
last sysfs file: /sys/power/state
Modules linked in: psmouse evdev pcspkr serio_raw [last unloaded: scsi_wait_scan]

Pid: 1638, comm: fxsave-32-excep Not tainted 2.6.35-07798-g58a992b9-dirty #633 VP3-596B-DD/VT82C597
EIP: 0060:[<c1003527>] EFLAGS: 00010202 CPU: 0
EIP is at math_error+0x1b4/0x1c8
EAX: 00000003 EBX: cf9be7e0 ECX: 00000000 EDX: cf9c5c00
ESI: cf9d9fb4 EDI: c1372db3 EBP: 00000010 ESP: cf9d9f1c
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process fxsave-32-excep (pid: 1638, ti=cf9d8000 task=cf9be7e0 task.ti=cf9d8000)
Stack:
00000000 00000301 00000004 00000000 00000000 cf9d3000 cf9da8f0 00000001
<0> 00000004 cf9b6b60 c1019a6b c1019a79 00000020 00000242 000001b6 cf9c5380
<0> cf806b40 cf791880 00000000 00000282 00000282 c108a213 00000020 cf9c5380
Call Trace:
[<c1019a6b>] ? need_resched+0x11/0x1a
[<c1019a79>] ? should_resched+0x5/0x1f
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c100353b>] ? do_coprocessor_error+0x0/0x11
[<c12d5965>] ? error_code+0x65/0x70
Code: a8 20 74 30 c7 44 24 0c 06 00 03 00 8d 54 24 04 89 d9 b8 08 00 00 00 e8 9b 6d 02 00 eb 16 8b 93 5c 02 00 00 eb 05 e9 04 ff ff ff <9b> dd 32 9b e9 16 ff ff ff 81 c4 84 00 00 00 5b 5e 5f 5d c3 c6
EIP: [<c1003527>] math_error+0x1b4/0x1c8 SS:ESP 0068:cf9d9f1c

This usually continues in slight variations until the system is reset.

This bug was introduced by commit 58a992b9:
	x86-32, fpu: Rewrite fpu_save_init()
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Link: http://lkml.kernel.org/r/1302106003-366952-1-git-send-email-hans.rosenfeld@amd.comSigned-off-by: H. Peter Anvin <hpa@zytor.com>

For isochronous packets the actual_length is the sum of the actual
length of each of the packets, however between the packets might be
padding, so it is not sufficient to just send the first actual_length
bytes of the buffer. To fix this and simultanesouly optimize the
bandwidth the content of the isochronous packets are send without the
padding, the padding is restored on the receiving end.
Signed-off-by: Arjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The number_of_packets was not transmitted for RET_SUBMIT packets. The
linux client used the stored number_of_packet from the submitted
request. The windows userland client does not do this however and needs
to know the number_of_packets to determine the size of the transmission.
Signed-off-by: Arjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When doing a usb port reset do a queued reset instead to prevent a
deadlock: the reset will cause the driver to unbind, causing the
usb_driver_lock_for_reset to stall.
Signed-off-by: Arjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When shuting down the tcp_rx and tcp_tx threads first check if they are
not closed already (maybe because an error caused them to return).
Signed-off-by: Arjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

After Quick Migration, the network is not immediately operational in the
current context when receiving RNDIS_STATUS_MEDIA_CONNECT event. So, I added
another netif_notify_peers() into a scheduled work, otherwise GARP packet will
not be sent after quick migration, and cause network disconnection.

Thanks to Mike Surcouf <mike@surcouf.co.uk> for reporting the bug and
testing the patch.
Reported-by: Mike Surcouf <mike@surcouf.co.uk>
Tested-by: Mike Surcouf <mike@surcouf.co.uk>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Restore the initialization of mmu_cr4_features during boot, which was
removed without comment in checkin e5f15b45

x86: Cleanup highmap after brk is concluded

thereby breaking resume from hibernate.  This restores previous
functionality in approximately the same place, and corrects the
reading of %cr4 on pre-CPUID hardware (%cr4 exists if and only if
CPUID is supported.)

However, part of the problem is that the hibernate suspend/resume
sequence should manage the save/restore of %cr4 explicitly.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <201104020154.57136.rjw@sisk.pl>

Now that everything that was using these interfaces has been converted to
the syscore ops, prevent new code from using the old API.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

CH Pro Throttle needs NOGET the same way as other products from
the same vendor require.
Reported-by: Unavowed <unavowed@vexillium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The evdev buffer isn't big enough when you get many fingers on the
device. Bump up the buffer to a reasonable size, matching what other
multitouch devices use. Without this change, events may be discarded in
the evdev buffer before they are read.
Reported-by: Simon Budig <simon@budig.de>
Cc: Henrik Rydberg <rydberg@euromail.se>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent

If KVM cannot find an exact match for a requested CPUID leaf, the
code will try to find the closest match instead of simply confessing
it's failure.
The implementation was meant to satisfy the CPUID specification, but
did not properly check for extended and standard leaves and also
didn't account for the index subleaf.
Beside that this rule only applies to CPUID intercepts, which is not
the only user of the kvm_find_cpuid_entry() function.

So fix this algorithm and call it from kvm_emulate_cpuid().
This fixes a crash of newer Linux kernels as KVM guests on
AMD Bulldozer CPUs, where bogus values were returned in response to
a CPUID intercept.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

When KVM scans the 0xD CPUID leaf for propagating the XSAVE save area
leaves, it assumes that the leaves are contigious and stops at the
first zero one. On AMD hardware there is a gap, though, as LWP uses
leaf 62 to announce it's state save area.
So lets iterate through all 64 possible leaves and simply skip zero
ones to also cover later features.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

If asynchronous hva_to_pfn() is requested call GUP with FOLL_NOWAIT to
avoid sleeping on IO. Check for hwpoison is done at the same time,
otherwise check_user_page_hwpoison() will call GUP again and will put
vcpu to sleep.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

irqfd in kvm used flush_work incorrectly: it assumed that work scheduled
previously can't run after flush_work, but since kvm uses a non-reentrant
workqueue (by means of schedule_work) we need flush_work_sync to get that
guarantee.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr>
Tested-by: Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr>
Signed-off-by: Avi Kivity <avi@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block:
  ide: always ensure that blk_delay_queue() is called if we have pending IO
  block: fix request sorting at unplug
  dm: improve block integrity support
  fs: export empty_aops
  ide: ide_requeue_and_plug() reinstate "always plug" behaviour
  blk-throttle: don't call xchg on bool
  ufs: remove unessecary blk_flush_plug
  block: make the flush insertion use the tail of the dispatch list
  block: get rid of elv_insert() interface
  block: dump request state on seeing a corrupted request completion

On an error path in inotify_init1 a normal user can trigger a double
free of struct user.  This is a regression introduced by a2ae4cc9
("inotify: stop kernel memory leak on file creation failure").

We fix this by making sure that if a group exists the user reference is
dropped when the group is cleaned up.  We should not explictly drop the
reference on error and also drop the reference when the group is cleaned
up.

The new lifetime rules are that an inotify group lives from
inotify_new_group to the last fsnotify_put_group.  Since the struct user
and inotify_devs are directly tied to this lifetime they are only
changed/updated in those two locations.  We get rid of all special
casing of struct user or user->inotify_devs.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org (2.6.37 and up)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Just because we are not requeuing a request does not mean that
some aren't pending. So always issue a blk_delay_queue() if
either we are requeueing OR there's pending IO.

This fixes a boot problem for some IDE boxes.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Comparison function for list_sort() must be anticommutative,
otherwise it is not sorting in ordinary meaning.

But fortunately list_sort() always check ((*cmp)(priv, a, b) <= 0)
it not distinguish negative and zero, so comparison function can
implement only less-or-equal instead of full three-way comparison.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

The current block integrity (DIF/DIX) support in DM is verifying that
all devices' integrity profiles match during DM device resume (which
is past the point of no return).  To some degree that is unavoidable
(stacked DM devices force this late checking).  But for most DM
devices (which aren't stacking on other DM devices) the ideal time to
verify all integrity profiles match is during table load.

Introduce the notion of an "initialized" integrity profile: a profile
that was blk_integrity_register()'d with a non-NULL 'blk_integrity'
template.  Add blk_integrity_is_initialized() to allow checking if a
profile was initialized.

Update DM integrity support to:
- check all devices with _initialized_ integrity profiles match
  during table load; uninitialized profiles (e.g. for underlying DM
  device(s) of a stacked DM device) are ignored.
- disallow a table load that would result in an integrity profile that
  conflicts with a DM device's existing (in-use) integrity profile
- avoid clearing an existing integrity profile
- validate all integrity profiles match during resume; but if they
  don't all we can do is report the mismatch (during resume we're past
  the point of no return)
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

With the ->sync_page() hook gone, we have a few users that
add their own static address_space_operations without any
functions defined.

fs/inode.c already has an empty_aops that it uses for init
purposes. Lets export that and use it in the places where
an otherwise empty aops was defined.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

We see stalls if we don't always ensure that the queue gets run
again. Even if rq == NULL, we could have other pending requests
in the queue.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

xchg does not work portably with smaller than 32bit types.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

We already flush the per-process plugging list when context switching,
so a blk_flush_plug call just before a yield() is not needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Currently we just dump a non-informative 'request botched' message.
Lets actually try and print something sane to help debug issues
around this.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915/lvds: Remove 0xa0 DDC probe for LVDS
  drm/i915/crt: Remove 0xa0 probe for VGA