The IEEE1588 Standard specifies that the timestamps of Packets must be
captured when the PTP message timestamp point (leading edge of first
octet after the start of frame delimiter) crosses the boundary between
the node and the network. As the MAC latches the timestamp at an
internal point, the captured timestamp must be corrected for the
additional data transmission latency, as described in the publicly
available datasheet [1].

This patch only corrects for the MAC-Internal delay, which can be read
out from the MAC_Ingress_Timestamp_Latency register on DWMAC version 5,
since the Phy framework currently does not support querying the Phy
ingress and egress latency. The Closs Domain Crossing Circuits errors as
indicated in [1] are already being accounted in the
stmmac_get_tx_hwtstamp() function and are not corrected here.

As the Latency varies for different link speeds and MII
modes of operation, the correction value needs to be updated on each
link state change.

As the delay also causes a phase shift in the timestamp counter compared
to the rest of the network, this correction will also reduce phase error
when generating PPS outputs from the timestamp counter.

Since the correction registers may be unavailable on some hardware and
no feature bits are documented for dynamically detection of the MAC
propagation delay readout, introduce a feature bit to explicitely enable
MAC delay Correction in the gluecode driver.

[1] i.MX8MP Reference Manual, rev.1 Section 11.7.2.5.3 "Timestamp
correction"
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v2-1-3366f38ee9a6@pengutronix.de
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v3-1-61e63427735e@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 6ba5a3c5 ("[UDP]: Make full use of proto.h.udp_hash innovation.")
removed these implementations but leave declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages")
declared but never implemented it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f8572d8f ("sysctl net: Remove unused binary sysctl code")
left behind this declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit acb67442 ("net: sched: introduce per-block callbacks")
implemented these but never used it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pneigh_for_each() is never implemented since the beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3c4d7559 ("tls: kernel TLS support") declared but never implemented
these functions.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting dev->priv_flags & IFF_SEE_ALL_HWTSTAMP_REQUESTS is only legal
for drivers which were converted to ndo_hwtstamp_get() and
ndo_hwtstamp_set(), and it is only there that we call ndo_hwtstamp_set()
for a request that otherwise goes to phylib (for stuff like packet traps,
which need to be undone if phylib failed, hence the old_cfg logic).

The problem is that we end up calling ndo_hwtstamp_get() when we don't
need to (even if the SIOCSHWTSTAMP wasn't intended for phylib, or if it
was, but the driver didn't set IFF_SEE_ALL_HWTSTAMP_REQUESTS). For those
unnecessary conditions, we share a code path with virtual drivers (vlan,
macvlan, bonding) where ndo_hwtstamp_get() is implemented as
generic_hwtstamp_get_lower(), and may be resolved through
generic_hwtstamp_ioctl_lower() if the lower device is unconverted.

I.e. this situation:

$ ip link add link eno0 name eno0.100 type vlan id 100
$ hwstamp_ctl -i eno0.100 -t 1

We are unprepared to deal with this, because if ndo_hwtstamp_get() is
resolved through a legacy ndo_eth_ioctl(SIOCGHWTSTAMP) lower_dev
implementation, that needs a non-NULL old_cfg.ifr pointer, and we don't
have it.

But we don't even need to deal with it either. In the general case,
drivers may not even implement SIOCGHWTSTAMP handling, only SIOCSHWTSTAMP,
so it makes sense to completely avoid a SIOCGHWTSTAMP call if we can.

The solution is to split the single "if" condition into 3 smaller ones,
thus separating the decision to call ndo_hwtstamp_get() from the
decision to call ndo_hwtstamp_set(). The third "if" condition is
identical to the first one, and both are subsets of the second one.
Thus, the "cfg" argument of kernel_hwtstamp_config_changed() is always
valid.
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iLOspJsvjPj+y8jikg7erXDomWe8sqHMdfL_2LQSFrPAg@mail.gmail.com/
Fixes: fd770e85 ("net: remove phy_has_hwtstamp() -> phy_mii_ioctl() decision from converted drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use eth_broadcast_addr() to assign broadcast address instead
of memset().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc with W=1 reports
drivers/net/ethernet/ibm/ibmvnic.c:194:13: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
                                            ^
This variable is not used so remove it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308040609.zQsSXWXI-lkp@intel.com/Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add page pool for RX buffers for faster buffer cycle and reduce CPU
usage.

The standard page pool API is used.

With iperf and 128 threads test, this patch improved the throughput
by 12-15%, and decreased the IRQ associated CPU's usage from 99-100% to
10-50%.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rushil Gupta says:

====================
gve: Add QPL mode for DQO descriptor format

GVE supports QPL ("queue-page-list") mode where
all data is communicated through a set of pre-registered
pages. Adding this mode to DQO.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a note about QPL and RDA mode
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RX path allocates the QPL page pool at queue creation, and
tries to reuse these pages through page recycling. This patch
ensures that on refill no non-QPL pages are posted to the device.

When the driver is running low on free buffers, an ondemand
allocation step kicks in that allocates a non-qpl page for
SKB business to free up the QPL page in use.

gve_try_recycle_buf was moved to gve_rx_append_frags so that driver does
not attempt to mark buffer as used if a non-qpl page was allocated
ondemand.
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each QPL page is divided into GVE_TX_BUFS_PER_PAGE_DQO buffers.
When a packet needs to be transmitted, we break the packet into max
GVE_TX_BUF_SIZE_DQO sized chunks and transmit each chunk using a TX
descriptor.
We allocate the TX buffers from the free list in dqo_tx.
We store these TX buffer indices in an array in the pending_packet
structure.

The TX buffers are returned to the free list in dqo_compl after
receiving packet completion or when removing packets from miss
completions list.
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GVE supports QPL ("queue-page-list") mode where
all data is communicated through a set of pre-registered
pages. Adding this mode to DQO descriptor format.

Add checks, abi-changes and device options to support
QPL mode for DQO in addition to GQI. Also, use
pages-per-qpl supplied by device-option to control the
size of the "queue-page-list".
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: set few options locklessly

This series is avoiding the socket lock for six TCP options.

They are not heavily used, but this exercise can give
ideas for other parts of TCP/IP stack :)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

rskq_defer_accept field can be read/written without
the need of holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tp->linger2 can be set locklessly as long as readers
use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tp->keepalive_probes can be set locklessly, readers
are already taking care of this field being potentially
set by other threads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tp->keepalive_intvl can be set locklessly, readers
are already taking care of this field being potentially
set by other threads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

icsk->icsk_user_timeout can be set locklessly,
if all read sides use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

icsk->icsk_syn_retries can safely be set without locking the socket.

We have to add READ_ONCE() annotations in tcp_fastopen_synack_timer()
and tcp_write_timeout().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.6

The first pull request for v6.6 and only driver patches this time.
Nothing special really standing out, it has been quiet most likely due
to vacations.

Major changes:

rtl8xxxu
 - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
   RTL8192EU and RTL8723BU

mwifiex
 - allow moving to a different namespace

mt76
 - preparation for mt7925 support
 - mt7981 support

ath12k
 - Extremely High Throughput (EHT) PHY support for Wi-Fi 7

* tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (172 commits)
  wifi: rtw89: return failure if needed firmware elements are not recognized
  wifi: rtw89: add to parse firmware elements of BB and RF tables
  wifi: rtw89: introduce infrastructure of firmware elements
  wifi: rtw89: add firmware suit for BB MCU 0/1
  wifi: rtw89: add firmware parser for v1 format
  wifi: rtw89: introduce v1 format of firmware header
  wifi: rtw89: support firmware log with formatted text
  wifi: rtw89: recognize log format from firmware file
  wifi: ath12k: avoid deadlock by change ieee80211_queue_work for regd_update_work
  wifi: ath12k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED
  wifi: ath12k: relax list iteration in ath12k_mac_vif_unref()
  wifi: ath12k: configure puncturing bitmap
  wifi: ath12k: parse WMI service ready ext2 event
  wifi: ath12k: add MLO header in peer association
  wifi: ath12k: peer assoc for 320 MHz
  wifi: ath12k: add WMI support for EHT peer
  wifi: ath12k: prepare EHT peer assoc parameters
  wifi: ath12k: add EHT PHY modes
  wifi: ath12k: propagate EHT capabilities to userspace
  wifi: ath12k: WMI support to process EHT capabilities
  ...
====================

Link: https://lore.kernel.org/r/87msz7j942.fsf@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
tcp: Disable header prediction for MD5.

The 1st patch disable header prediction for MD5 flow and the 2nd
patch updates the stale comment in tcp_parse_options().
====================

Link: https://lore.kernel.org/r/20230803224552.69398-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 9ea88a15 ("tcp: md5: check md5 signature without socket
lock"), the MD5 option is checked in tcp_v[46]_rcv().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-3-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TCP socket saves the minimum required header length in tcp_header_len
of struct tcp_sock, and later the value is used in __tcp_fast_path_on()
to generate a part of TCP header in tcp_sock(sk)->pred_flags.

In tcp_rcv_established(), if the incoming packet has the same pattern
with pred_flags, we enter the fast path and skip full option parsing.

The MD5 option is parsed in tcp_v[46]_rcv(), so we need not parse it
again later in tcp_rcv_established() unless other options exist.  We
add TCPOLEN_MD5SIG_ALIGNED to tcp_header_len in two paths to avoid the
slow path.

For passive open connections with MD5, we add TCPOLEN_MD5SIG_ALIGNED
to tcp_header_len in tcp_create_openreq_child() after 3WHS.

On the other hand, we do it in tcp_connect_init() for active open
connections.  However, the value is overwritten while processing
SYN+ACK or crossed SYN in tcp_rcv_synsent_state_process().

These two cases will have the wrong value in pred_flags and never go
into the fast path.

We could update tcp_header_len in tcp_rcv_synsent_state_process(), but
a test with slightly modified netperf which uses MD5 for each flow shows
that the slow path is actually a bit faster than the fast path.

  On c5.4xlarge EC2 instance (16 vCPU, 32 GiB mem)

  $ for i in {1..10}; do
  ./super_netperf $(nproc) -H localhost -l 10 -- -m 256 -M 256;
  done

  Avg of 10
  * 36e68ead  : 10.376 Gbps
  * all fast path : 10.374 Gbps (patch v2, See Link)
  * all slow path : 10.394 Gbps

The header prediction is not worth adding complexity for MD5, so let's
disable it for MD5.

Link: https://lore.kernel.org/netdev/20230803042214.38309-1-kuniyu@amazon.com/Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-2-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move marking the PHY as being on a SFP module into the SFP code between
getting the PHY device (and thus initialising the phy_device structure)
and registering the discovered device.

This means that PHY drivers can use phy_on_sfp() in their match and
get_features methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qRaga-001vKt-8X@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit c3d2ed93 ("mlxsw: Remove old parsing depth infrastructure")
left behind mlxsw_sp_nve_inc_parsing_depth_get()/mlxsw_sp_nve_inc_parsing_depth_put().
And commit 532b49e4 ("mlxsw: spectrum_span: Derive SBIB from maximum port speed & MTU")
remove mlxsw_sp_span_port_mtu_update()/mlxsw_sp_span_speed_update_work() but leave the
declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230803142047.42660-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ixgbe_napi_add_all()/ixgbe_napi_del_all() are declared but never implemented in
commit 92915f71 ("ixgbevf: Driver main and ethool interface module and main header")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803141904.15316-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d021c344 ("VSOCK: Introduce VM Sockets") declared but never implemented
vsock_release_pending(). Also vsock_init_tap() never implemented since introduction
in commit 531b3748 ("VSOCK: Add vsockmon tap functions").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230803134507.22660-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d8d9ba8d ("net: 802: remove dead leftover after ipx driver removal")
remove these implementations but leave the declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803135424.41664-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After commit 098a697b ("tcp_metrics: Use a single hash table
for all network namespaces.") we can avoid calling tcp_net_metrics_init()
for each new netns.

Instead, rename tcp_net_metrics_init() to tcp_metrics_hash_alloc(),
and move it to __init section.

Also move tcpmhash_entries to __initdata section.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230803135417.2716879-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 1e6e7610 ("net: hns3: configure promisc mode for VF asynchronously")
left behind hclge_inform_vf_promisc_info() declaration.
And commit 68c0a5c7 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support")
declared but never implemented hclge_cmd_mdio_write() and hclge_cmd_mdio_read().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803135138.37456-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

llc_conn_ac_send_i_rsp_as_ack() and llc_conn_ev_sendack_tmr_exp()
are never implemented since beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803134747.41512-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jiri Pirko says:

====================
devlink: use spec to generate split ops

This is an outcome of the discussion in the following thread:
https://lore.kernel.org/netdev/20230720121829.566974-1-jiri@resnulli.us/
It serves as a dependency on the linked selector patchset.

There is an existing spec for devlink used for userspace part
generation. There are two commands supported there.

This patchset extends the spec so kernel split ops code could
be generated from it.
====================

Link: https://lore.kernel.org/r/20230803111340.1074067-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Do the switch and use generated split ops for get and info_get commands.
Remove those from small ops array.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-13-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Put the newly added generated header to the include list. Remove the
duplicated temporary function prototypes.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-12-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Improve the existing devlink spec in order to serve as a source for
generation of valid devlink split ops for the existing commands.
Add the generated sources.

Node that the policies are narrowed down only to the attributes that
are actually parsed. The dont-validate-strict parsing policy makes sure
that other possibly passed garbage attributes from userspace are
ignored during validation.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-11-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing dump op for info-get command and re-generate related
devlink-user.[ch] code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-10-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>