- 07 Nov, 2023 1 commit
-
-
Alex Spataru authored
Enables the SPI-connected CSC35L41 audio amplifier for this laptop model. As of BIOS version 303 it's still necessary to modify the ACPI table to add the related _DSD properties: https://github.com/alex-spataru/asus_zenbook_ux7602zm_sound/Signed-off-by:
Alex Spataru <alex_spataru@outlook.com> Link: https://lore.kernel.org/r/DS7PR07MB7621BB5BB14F5473D181624CE3A4A@DS7PR07MB7621.namprd07.prod.outlook.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 31 Oct, 2023 3 commits
-
-
Harshit Mogalapalli authored
When firmware status is invalid, assign -EINVAL to ret as ret is '0' at that point and returning success is incorrect when firmware status is invalid. Fixes: a51d8ba0 ("ALSA: hda: cs35l41: Check CSPL state after loading firmware") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20231030070836.3234385-1-harshit.m.mogalapalli@oracle.comSigned-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.7 More updates for v6,7 following the early merge request: - Fixes for handling of component name prefixing when name prefixes are used by the machine driver. - Fixes for noise when stopping some Sounwire CODECs. - Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel platforms and more Qualcomm SC7180 platforms.
-
Takashi Iwai authored
Pull 6.7 materials Signed-off-by:
-
- 29 Oct, 2023 1 commit
-
-
Arnd Bergmann authored
The newly introduced function is global but only called in this one file and has no extern prototype, so it should probably be static: sound/pci/hda/cs35l41_hda.c:733:5: error: no previous prototype for 'cs35l41_verify_id' [-Werror=missing-prototypes] 733 | int cs35l41_verify_id(struct cs35l41_hda *cs35l41, unsigned int *regid, unsigned int *reg_revid) Fixes: 881b7bce ("ALSA: hda: cs35l41: Run boot process during resume callbacks") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231027152515.482411-1-arnd@kernel.orgSigned-off-by:
-
- 27 Oct, 2023 17 commits
-
-
Mark Brown authored
This was sent too late to actually make it for v6.6 but was sent against v6.6 so merge it up here.
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: There are machines which use codec rt5514 as DMIC, add support for them.
-
Srinivas Kandagatla authored
In the current setup the PA is left unmuted even when the Soundwire ports are not started streaming. This can lead to click and pop sounds during start. There is a same issue in the reverse order where in the PA is left unmute even after the data stream is stopped, the time between data stream stopping and port closing is long enough to accumulate DC on the line resulting in Click/Pop noise during end of stream. making use of new mute_unmute_on_trigger flag is helping a lot with this Click/Pop issues reported on this Codec Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
In some setups like Speaker amps which are very sensitive, ex: keeping them unmute without actual data stream for very short duration results in a static charge and results in pop and clicks. To minimize this, provide a way to mute and unmute such codecs during trigger callbacks. Signed-off-by:
-
Kuninori Morimoto authored
static void cx81801_close() { ... (A) struct snd_soc_dapm_context *dapm = &component->card->dapm; ... (B) if (!component) return; } (A) uses component before NULL check (B). This patch moves it after (B). Fixes: d0fdfe34 ("ASoC: cx20442: replace codec to component") Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/3e608474-e99a-4866-ae98-3054a4221f09@moroto.mountainSigned-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87ttqdq623.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Arnd Bergmann authored
Without this dependency, acp63 fails to link: x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_audio_remove': acp63.c:(.text+0x22): undefined reference to `acp_disable_interrupts' x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_i2s_master_clock_generate.isra.0': acp63.c:(.text+0x6f): undefined reference to `smn_read' x86_64-linux-ld: acp63.c:(.text+0x81): undefined reference to `smn_write' x86_64-linux-ld: acp63.c:(.text+0x8e): undefined reference to `smn_read' x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_pcm_resume': acp63.c:(.text+0x230): undefined reference to `restore_acp_i2s_params' x86_64-linux-ld: acp63.c:(.text+0x23d): undefined reference to `restore_acp_pdm_params' x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_audio_probe': acp63.c:(.text+0x474): undefined reference to `acp_enable_interrupts' Fixes: d4c2d539 ("ASoC: amd: acp: add Kconfig options for acp6.3 based platform driver") Signed-off-by:
-
Arnd Bergmann authored
The aw88395_lib module is shared by all the aw883* drivers that need to select the corresponding Kconfig symbol. The newly added aw88399 incorrectly selects SND_SOC_AW88399_LIB instead, which is not defined anywhere in the kernel, causing a link failure when the actual one is missing: arm-linux-gnueabi-ld: sound/soc/codecs/aw88399.o: in function `aw88399_codec_probe': aw88399.c:(.text+0xbc6): undefined reference to `aw88395_dev_load_acf_check' arm-linux-gnueabi-ld: aw88399.c:(.text+0xbea): undefined reference to `aw88395_dev_cfg_load' Fixes: 8ade6cc7 ("ASoC: codecs: Add aw88399 amplifier driver") Signed-off-by:
-
Arnd Bergmann authored
A newly added function requires CONFIG_ACPI to avoid a build error: sound/soc/amd/acp/acp-legacy-common.c: In function 'check_acp_pdm': sound/soc/amd/acp/acp-legacy-common.c:401:19: error: implicit declaration of function 'acpi_find_child_device'; did you mean 'acpi_match_device'? [-Werror=implicit-function-declaration] 401 | pdm_dev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), pdm_addr, 0); | ^~~~~~~~~~~~~~~~~~~~~~ | acpi_match_device The acp drivers really only work when ACPI is enabled already, so just avoid the build failure with hard dependency in everything that enables the acp-legacy-common portion. Fixes: 3a94c8ad ("ASoC: amd: acp: add code for scanning acp pdm controller") Signed-off-by: -
Amadeusz Sławiński authored
In order to support Eve chromebooks add rt5514 configuration to board lookup table. rt5514 is used for capture in DMIC configuration on SSP 0 and TDM 1. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231027110537.2103712-3-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
To support AVS-rt5514 configuration add machine board connecting AVS platform component driver with rt5514 codec one. Signed-off-by:
-
Geoffrey D. Bennett authored
scarlett2_add_firmware_version_ctl() may return an error, but the return value was not being checked. Add the missing check. Signed-off-by:
Geoffrey D. Bennett <g@b4.vu> Fixes: 701949cc ("ALSA: scarlett2: Add support for reading firmware version") Link: https://lore.kernel.org/r/ZTuKcXajVnuelBEb@m.b4.vuSigned-off-by:
-
Matias Ezequiel Vara Larsen authored
This commit uses the ack() callback to determine when a buffer has been updated, then exposes it to guest. The current mechanism splits a dma buffer into descriptors that are exposed to the device. This dma buffer is shared with the user application. When the device consumes a buffer, the driver moves the request from the used ring to available ring. The driver exposes the buffer to the device without knowing if the content has been updated from the user. The section 2.8.21.1 of the virtio spec states that: "The device MAY access the descriptor chains the driver created and the memory they refer to immediately". If the device picks up buffers from the available ring just after it is notified, it happens that the content may be old. When the ack() callback is invoked, the driver exposes only the buffers that have already been updated, i.e., enqueued in the available ring. Thus, the device always picks up a buffer that is updated. For capturing, the driver starts by exposing all the available buffers to device. After device updates the content of a buffer, it enqueues it in the used ring. It is only after the ack() for capturing is issued that the driver re-enqueues the buffer in the available ring. Co-developed-by:
Anton Yakovlev <anton.yakovlev@opensynergy.com> Signed-off-by:
Matias Ezequiel Vara Larsen <mvaralar@redhat.com> Link: https://lore.kernel.org/r/ZTjkn1YAFz67yfqx@fedoraSigned-off-by:
-
Geoffrey D. Bennett authored
The values previously returned by the Level Meter control were passed through from the interface without interpretation, but it has been discovered that the order of the values matches the mux assignment order (which is not presented to userspace). In addition, the values for disabled mux outputs, and mux outputs which share a source are invalid. This patch adds a per-device meter_map[], and a dynamic meter_level_map[] which is updated on routing changes. The meter level map gets used by scarlett2_meter_ctl_get() to both present the values in a standard order, and to fix up the invalid values by zeroing them (for disabled outputs) and copying them (for mux outputs which share a source). Signed-off-by:
-
Geoffrey D. Bennett authored
Line outputs 3 & 4 on the Gen 3 18i8 are internally the analogue 7 and 8 outputs, and this renumbering is hidden from the user by line_out_remap(). By allowing higher values (representing non-analogue outputs) to be passed to line_out_remap(), repeated code from scarlett2_mux_src_enum_ctl_get() and scarlett2_mux_src_enum_ctl_put() can be removed. Signed-off-by:
-
Geoffrey D. Bennett authored
The 84 bytes read during initialisation step 2 were previously ignored. This patch retrieves the firmware version from bytes 8-11, stores it in the scarlett2_data struct, and makes it available through a new control "Firmware Version". Signed-off-by:
-
Geoffrey D. Bennett authored
The config sets are named NO_MIXER, GEN_2, GEN_3, and CLARETT currently. Rename NO_MIXER and GEN_3 to GEN_3A and GEN_3B respectively as NO_MIXER is only for the smaller Gen 3 devices. Signed-off-by:
-
Geoffrey D. Bennett authored
This driver was originally developed for the Focusrite Scarlett Gen 2 series. Since then Focusrite have used a similar protocol for their Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series. Let's call this common protocol the "Scarlett 2 Protocol" and rename the driver to scarlett2 to not imply that it is restricted to Gen 2 series devices. Signed-off-by:
-
- 26 Oct, 2023 18 commits
-
-
Mark Brown authored
Merge series from Hans de Goede <hdegoede@redhat.com>: Hi Mark, As requested here is a v2 of my series to add various quirks to the bytcr_wm5102 Intel board driver to make it more flexible. Changes in v2: - Dropped 2 already merged patches - Rebased on top of broonie/sound/for-6.7 Regards, Hans Hans de Goede (4): ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_SSP2 quirk ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_MCLK_19_2MHZ quirk ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_OUT_MAP quirk ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_IN_MAP quirk sound/soc/intel/boards/bytcr_wm5102.c | 229 +++++++++++++++++++++++--- 1 file changed, 202 insertions(+), 27 deletions(-) -- 2.41.0
-
Mark Brown authored
Merge series from Nikita Travkin <nikita@trvn.ru>: Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but instead must use adsp core to play sound. Since otherwise the hardware is, usually, very similar across the devices on the same platform, it makes sense to reuse the same boardfile. This series refactors the sc7180.c slightly and adds the functions to control clocks via adsp instead of controlling the hardware directly.
-
Mark Brown authored
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>: Some codec drivers compare widget names with strcmp, ignoring the component name prefix. If prefix is used, the comparisons start failing. Except Qualcomm lpass-rx-macro, none of the patches were tested on hardware.
-
Mark Brown authored
Merge series from wangweidong.a@awinic.com: Add the awinic,aw88399 property to the awinic,aw88395.yaml file. Add i2c and amplifier registration for aw88399 and their associated operation functions.
-
Stefan Binding authored
The existing code checks for the correct state transition after sending a command. However, it is possible for the message box to return -1, which indicates an error, if an error has occurred in the firmware. We can detect if the error has occurred, and return a different error. In addition, there is no recovering from a CSPL error, so the retry mechanism is not needed in this case, and we can return immediately. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Acked-by:
-
Stefan Binding authored
CSPL firmware should be in RUNNING or PAUSED state after loading. If not, the firmware has not been loaded correctly, and we can unload it and pass the error up. Signed-off-by:
-
Stefan Binding authored
Given the part is about to reset due to system suspend, and we are already in hibernate, there is no need to wake up the amp, just to get it ready to be reset. We just need to ensure cs_dsp is ready for reset by resetting the states. Signed-off-by:
-
Stefan Binding authored
To ensure the chip has correctly reset during probe and system suspend, we need to force a software reset, in case of systems where the hardware reset is not available. The software reset register was labelled as volatile but not readable, however, it is readable, (just returns 0x0). Adding it to readable registers means it will be correctly treated as volatile, and thus will not be cached. Signed-off-by:
-
Stefan Binding authored
During initial probe, after reset is asserted for the first time, the driver goes through a boot process to ensure the amp is ready to be used. This involves verifying a boot flag, as well as verifying the chip ids. This is necessary since it is possible for the amp to have been fully reset by the system suspend calls. Signed-off-by:
-
Stefan Binding authored
To ensure we are in a known state, exiting from reset at the point of probe or in system resume, assert reset before we de-assert it. Since the BIOS may enter into a pre-boot environment to control the amps (for example for boot beep), we need to ensure we start from a known, reset state prior to probe or system resume. Signed-off-by:
-
Stefan Binding authored
Some system suspend modes may remove power supplies. To ensure we are not running during this time, we should assert reset. Note: since the amps use a shared reset, asserting reset prior to system suspend only works if the amps are suspended in the reverse order to probe. Signed-off-by:
-
Stefan Binding authored
This laptop has an incorrect setting in its _DSD for boost type, but the rest of the _DSD is correct, and we can still use the reset label to obtain the reset gpio. Also fix channel map so that amp 0 is right, and amp 1 is left. Fixes: 581523ee ("ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost type") Signed-off-by:
-
Cezary Rojewski authored
Error path in snd_skl_parse_uuids() shall free last allocated module if its instance_id allocation fails. Fixes: f8e06652 ("ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case") Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231023095428.166563-18-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20231023095428.166563-15-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
